The control server works as an exchange point of Wireguard public keys for the nodes in the Tailscale network. It also assigns the IP addresses of the clients, creates the boundaries between each user, enables sharing machines between users, and exposes the advertised routes of your nodes.

Headscale implements this coordination server.

Status

Base functionality (nodes can communicate with each other)
Node registration through the web flow
Network changes are relayed to the nodes
Namespace support (~equivalent to multi-user in Tailscale.com)
Routing (advertise & accept, including exit nodes)
Node registration via pre-auth keys (including reusable keys, and ephemeral node support)
JSON-formatted output
ACLs
Taildrop (File Sharing)
Support for alternative IP ranges in the tailnets (default Tailscale's 100.64.0.0/10)
DNS (passing DNS servers to nodes)
Share nodes between ~~users~~ namespaces
MagicDNS / Smart DNS

Roadmap 🤷

Suggestions/PRs welcomed!

Running it

Download the Headscale binary https://github.com/juanfont/headscale/releases, and place it somewhere in your PATH or use the docker container
```
docker pull headscale/headscale:x.x.x
```

(Optional, you can also use SQLite) Get yourself a PostgreSQL DB running

docker run --name headscale -e POSTGRES_DB=headscale -e \
  POSTGRES_USER=foo -e POSTGRES_PASSWORD=bar -p 5432:5432 -d postgres

Set some stuff up (headscale Wireguard keys & the config.json file)

wg genkey > private.key
wg pubkey < private.key > public.key  # not needed

# Postgres
cp config.json.postgres.example config.json
# or
# SQLite
cp config.json.sqlite.example config.json

Create a namespace (a namespace is a 'tailnet', a group of Tailscale nodes that can talk to each other)

headscale namespaces create myfirstnamespace

or docker:

the db.sqlite mount is only needed if you use sqlite

touch db.sqlite
docker run -v $(pwd)/private.key:/private.key -v $(pwd)/config.json:/config.json -v $(pwd)/derp.yaml:/derp.yaml -v $(pwd)/db.sqlite:/db.sqlite -p 127.0.0.1:8000:8000 headscale/headscale:x.x.x headscale namespaces create myfirstnamespace

or if your server is already running in docker:

docker exec <container_name> headscale create myfirstnamespace

Run the server

headscale serve

or docker:

the db.sqlite mount is only needed if you use sqlite

docker run -v $(pwd)/private.key:/private.key -v $(pwd)/config.json:/config.json -v $(pwd)/derp.yaml:/derp.yaml -v $(pwd)/db.sqlite:/db.sqlite -p 127.0.0.1:8000:8000 headscale/headscale:x.x.x headscale serve

If you used tailscale.com before in your nodes, make sure you clear the tailscald data folder
```
systemctl stop tailscaled
rm -fr /var/lib/tailscale
systemctl start tailscaled
```

Add your first machine

tailscale up -login-server YOUR_HEADSCALE_URL

Navigate to the URL you will get with tailscale up, where you'll find your machine key.

In the server, register your machine to a namespace with the CLI

headscale -n myfirstnamespace node register YOURMACHINEKEY

or docker:

docker run -v $(pwd)/private.key:/private.key -v $(pwd)/config.json:/config.json -v $(pwd)/derp.yaml:/derp.yaml headscale/headscale:x.x.x headscale -n myfirstnamespace node register YOURMACHINEKEY

or if your server is already running in docker:

docker exec <container_name> headscale -n myfistnamespace node register YOURMACHINEKEY

Alternatively, you can use Auth Keys to register your machines:

Create an authkey

headscale -n myfirstnamespace preauthkeys create --reusable --expiration 24h

or docker:

docker run -v $(pwd)/private.key:/private.key -v $(pwd)/config.json:/config.json -v$(pwd)/derp.yaml:/derp.yaml -v $(pwd)/db.sqlite:/db.sqlite headscale/headscale:x.x.x headscale -n myfirstnamespace preauthkeys create --reusable --expiration 24h

or if your server is already running in docker:

docker exec <container_name> headscale -n myfirstnamespace preauthkeys create --reusable --expiration 24h

Use the authkey from your machine to register it

tailscale up -login-server YOUR_HEADSCALE_URL --authkey YOURAUTHKEY

If you create an authkey with the --ephemeral flag, that key will create ephemeral nodes. This implies that --reusable is true.

Please bear in mind that all the commands from headscale support adding -o json or -o json-line to get a nicely JSON-formatted output.

Configuration reference

Headscale's configuration file is named config.json or config.yaml. Headscale will look for it in /etc/headscale, ~/.headscale and finally the directory from where the Headscale binary is executed.

    "server_url": "http://192.168.1.12:8080",
    "listen_addr": "0.0.0.0:8080",
    "ip_prefix": "100.64.0.0/10"

server_url is the external URL via which Headscale is reachable. listen_addr is the IP address and port the Headscale program should listen on. ip_prefix is the IP prefix (range) in which IP addresses for nodes will be allocated (default 100.64.0.0/10, e.g., 192.168.4.0/24, 10.0.0.0/8)

    "log_level": "debug"

log_level can be used to set the Log level for Headscale, it defaults to debug, and the available levels are: trace, debug, info, warn and error.

    "private_key_path": "private.key",

private_key_path is the path to the Wireguard private key. If the path is relative, it will be interpreted as relative to the directory the configuration file was read from.

    "derp_map_path": "derp.yaml",

derp_map_path is the path to the DERP map file. If the path is relative, it will be interpreted as relative to the directory the configuration file was read from.

    "ephemeral_node_inactivity_timeout": "30m",

ephemeral_node_inactivity_timeout is the timeout after which inactive ephemeral node records will be deleted from the database. The default is 30 minutes. This value must be higher than 65 seconds (the keepalive timeout for the HTTP long poll is 60 seconds, plus a few seconds to avoid race conditions).

    "db_host": "localhost",
    "db_port": 5432,
    "db_name": "headscale",
    "db_user": "foo",
    "db_pass": "bar",

The fields starting with db_ are used for the PostgreSQL connection information.

Running the service via TLS (optional)

    "tls_cert_path": ""
    "tls_key_path": ""

Headscale can be configured to expose its web service via TLS. To configure the certificate and key file manually, set the tls_cert_path and tls_cert_path configuration parameters. If the path is relative, it will be interpreted as relative to the directory the configuration file was read from.

    "tls_letsencrypt_hostname": "",
    "tls_letsencrypt_listen": ":http",
    "tls_letsencrypt_cache_dir": ".cache",
    "tls_letsencrypt_challenge_type": "HTTP-01",

To get a certificate automatically via Let's Encrypt, set tls_letsencrypt_hostname to the desired certificate hostname. This name must resolve to the IP address(es) Headscale is reachable on (i.e., it must correspond to the server_url configuration parameter). The certificate and Let's Encrypt account credentials will be stored in the directory configured in tls_letsencrypt_cache_dir. If the path is relative, it will be interpreted as relative to the directory the configuration file was read from. The certificate will automatically be renewed as needed.

Challenge type HTTP-01

The default challenge type HTTP-01 requires that Headscale is reachable on port 80 for the Let's Encrypt automated validation, in addition to whatever port is configured in listen_addr. By default, Headscale listens on port 80 on all local IPs for Let's Encrypt automated validation.

If you need to change the ip and/or port used by Headscale for the Let's Encrypt validation process, set tls_letsencrypt_listen to the appropriate value. This can be handy if you are running Headscale as a non-root user (or can't run setcap). Keep in mind, however, that Let's Encrypt will only connect to port 80 for the validation callback, so if you change tls_letsencrypt_listen you will also need to configure something else (e.g. a firewall rule) to forward the traffic from port 80 to the ip:port combination specified in tls_letsencrypt_listen.

Challenge type TLS-ALPN-01

Alternatively, tls_letsencrypt_challenge_type can be set to TLS-ALPN-01. In this configuration, Headscale listens on the ip:port combination defined in listen_addr. Let's Encrypt will only connect to port 443 for the validation callback, so if listen_addr is not set to port 443, something else (e.g. a firewall rule) will be required to forward the traffic from port 443 to the ip:port combination specified in listen_addr.

Policy ACLs

Headscale implements the same policy ACLs as Tailscale.com, adapted to the self-hosted environment.

For instance, instead of referring to users when defining groups you must use namespaces (which are the equivalent to user/logins in Tailscale.com).

Please check https://tailscale.com/kb/1018/acls/, and ./tests/acls/ in this repo for working examples.

Apple devices

An endpoint with information on how to connect your Apple devices (currently macOS only) is available at /apple on your running instance.

Disclaimer

We have nothing to do with Tailscale, or Tailscale Inc.
The purpose of writing this was to learn how Tailscale works.

More on Tailscale

Languages

Go 97.7%

HTML 1.4%

Nix 0.6%

Shell 0.2%

Makefile 0.1%