Rebased code from new eried repo commits. Changed to to reflect strijar implementation. Fixed previous issue with old ssb-am-tx ui_mictx code.

firmware/application/apps/soundboard_app.cpp

@@ -110,7 +110,11 @@ void SoundBoardView::start_tx(const uint32_t id) {
 		1536000 / 20,		// Update vu-meter at 20Hz
 		transmitter_model.channel_bandwidth(),
 		0,	// Gain is unused
-		TONES_F2D(tone_key_frequency(tone_key_index), 1536000)
+		TONES_F2D(tone_key_frequency(tone_key_index), 1536000),
+		0, //AM
+		0, //DSB
+		0, //USB
+		0 //LSB
 	);
 	baseband::set_sample_rate(sample_rate);
 	

firmware/application/apps/ui_mictx.cpp

@@ -65,8 +65,13 @@ void MicTXView::configure_baseband() {
 		sampling_rate / 20,		// Update vu-meter at 20Hz
 		transmitting ? transmitter_model.channel_bandwidth() : 0,
 		mic_gain,
-		TONES_F2D(tone_key_frequency(tone_key_index), sampling_rate)
+		TONES_F2D(tone_key_frequency(tone_key_index), sampling_rate),
+		enable_am,
+		enable_dsb,
+		enable_usb,
+		enable_lsb
 	);
+
 }
 
 void MicTXView::set_tx(bool enable) {
@@ -143,8 +148,20 @@ void MicTXView::rxaudio(bool is_on) {
 	if (is_on) {
 		audio::input::stop();
 		baseband::shutdown();
-		baseband::run_image(portapack::spi_flash::image_tag_nfm_audio);
-		receiver_model.set_modulation(ReceiverModel::Mode::NarrowbandFMAudio);
+		
+		if (enable_am || enable_usb || enable_lsb || enable_dsb) {
+			baseband::run_image(portapack::spi_flash::image_tag_am_audio);
+			receiver_model.set_modulation(ReceiverModel::Mode::AMAudio);	
+			if (options_mode.selected_index() < 4)
+				receiver_model.set_am_configuration(options_mode.selected_index() - 1);
+			else
+				receiver_model.set_am_configuration(0);
+		}
+		else {
+			baseband::run_image(portapack::spi_flash::image_tag_nfm_audio);
+			receiver_model.set_modulation(ReceiverModel::Mode::NarrowbandFMAudio);
+			
+		}
 		receiver_model.set_sampling_rate(3072000);
 		receiver_model.set_baseband_bandwidth(1750000);	
 //		receiver_model.set_tuning_frequency(field_frequency.value()); //probably this too can be commented out.
@@ -155,15 +172,15 @@ void MicTXView::rxaudio(bool is_on) {
 		receiver_model.enable();
 		audio::output::start();
 	} else {	//These incredibly convoluted steps are required for the vumeter to reappear when stopping RX.
+		receiver_model.set_modulation(ReceiverModel::Mode::NarrowbandFMAudio); //This fixes something with AM RX...
 		receiver_model.disable();
 		baseband::shutdown();
+
 		baseband::run_image(portapack::spi_flash::image_tag_mic_tx);
-		audio::input::start();
-//		transmitter_model.enable();		
+		audio::output::stop();
+		audio::input::start();	
 		portapack::pin_i2s0_rx_sda.mode(3);
-//		transmitting = false;
 		configure_baseband();
-//		transmitter_model.disable();
 	}
 }
 
@@ -198,11 +215,13 @@ MicTXView::MicTXView(
 		&field_bw,
 		&field_rfgain,
 		&field_rfamp,
+		&options_mode,
 		&field_frequency,
 		&options_tone_key,
 		&check_rogerbeep,
 		&check_rxactive,
 		&field_volume,
+		&field_rxbw,
 		&field_squelch,
 		&field_rxfrequency,
 		&field_rxlna,
@@ -262,6 +281,42 @@ MicTXView::MicTXView(
 	};
 	field_rfamp.set_value(rf_amp ? 14 : 0);
 	
+	options_mode.on_change = [this](size_t, int32_t v) {
+		enable_am = false;
+		enable_usb = false;
+		enable_lsb = false;
+		enable_dsb = false;
+		switch(v) {
+			case 0:
+				enable_am = false;
+				enable_usb = false;
+				enable_lsb = false;
+				enable_dsb = false;
+				field_bw.set_value(transmitter_model.channel_bandwidth() / 1000);
+				//if (rx_enabled)
+				rxaudio(rx_enabled); //Update now if we have RX audio on
+				break;
+			case 1:
+				enable_am = true;
+				rxaudio(rx_enabled); //Update now if we have RX audio on
+				break;
+			case 2:
+				enable_usb = true;
+				rxaudio(rx_enabled); //Update now if we have RX audio on
+				break;
+			case 3:
+				enable_lsb = true;
+				rxaudio(rx_enabled); //Update now if we have RX audio on
+				break;
+			case 4:
+				enable_dsb = true;
+				rxaudio(rx_enabled); //Update now if we have RX audio on
+				break;
+		}
+		//configure_baseband();
+	};
+	
+	
 	/*
 	check_va.on_select = [this](Checkbox&, bool v) {
 		va_enabled = v;
@@ -331,6 +386,21 @@ MicTXView::MicTXView(
 	field_volume.set_value((receiver_model.headphone_volume() - audio::headphone::volume_range().max).decibel() + 99);
 	field_volume.on_change = [this](int32_t v) { this->on_headphone_volume_changed(v);	};
 
+	field_rxbw.on_change = [this](size_t, int32_t v) {
+		switch(v) {
+			case 0:
+				receiver_model.set_nbfm_configuration(0);
+				break;
+			case 1:
+				receiver_model.set_nbfm_configuration(1);
+				break;
+			case 2:
+				receiver_model.set_nbfm_configuration(2);
+				break;
+		}
+	};
+	field_rxbw.set_selected_index(2);
+
 	field_squelch.on_change = [this](int32_t v) { 
 		receiver_model.set_squelch_level(100 - v);	
 	};

firmware/application/apps/ui_mictx.cpp.1

@@ -0,0 +1,526 @@
+/*
+ * Copyright (C) 2015 Jared Boone, ShareBrained Technology, Inc.
+ * Copyright (C) 2016 Furrtek
+ *
+ * This file is part of PortaPack.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include "ui_mictx.hpp"
+
+#include "baseband_api.hpp"
+#include "audio.hpp"
+#include "tonesets.hpp"
+#include "portapack_hal.hpp"
+#include "string_format.hpp"
+#include "irq_controls.hpp"
+
+
+#include <cstring>
+
+using namespace tonekey;
+using namespace portapack;
+
+namespace ui {
+
+void MicTXView::focus() {
+	switch(focused_ui) {
+		case 0:
+			field_frequency.focus();
+			break;
+		case 1:
+			field_rxfrequency.focus();
+			break;
+		default:
+			//field_va.focus();
+			tx_button.focus();
+			break;
+	}	
+}
+
+void MicTXView::update_vumeter() {
+	vumeter.set_value(audio_level);
+}
+
+void MicTXView::on_tx_progress(const bool done) {
+	// Roger beep played, stop transmitting
+	if (done)
+		set_tx(false);
+}
+
+void MicTXView::configure_baseband() {
+	baseband::set_audiotx_config(
+		sampling_rate / 20,		// Update vu-meter at 20Hz
+		transmitting ? transmitter_model.channel_bandwidth() : 0,
+		mic_gain,
+		TONES_F2D(tone_key_frequency(tone_key_index), sampling_rate),
+		enable_am,
+		am_carrier_lvl,
+		0,
+		enable_usb,
+		enable_lsb
+	);
+
+}
+
+void MicTXView::set_tx(bool enable) {
+	if (enable) {
+		if (rx_enabled)  //If audio RX is enabled
+			rxaudio(false); //Then turn off audio RX
+		receiver_model.set_modulation(ReceiverModel::Mode::NarrowbandFMAudio); // Weird workaround for FM TX
+		transmitting = true;
+		configure_baseband();
+		transmitter_model.set_tuning_frequency(tx_frequency);
+		transmitter_model.set_tx_gain(tx_gain);
+		transmitter_model.set_rf_amp(rf_amp);
+		transmitter_model.enable();
+		portapack::pin_i2s0_rx_sda.mode(3);		// This is already done in audio::init but gets changed by the CPLD overlay reprogramming
+	} else {
+		if (transmitting && rogerbeep_enabled) {
+			baseband::request_beep();	//Transmit the roger beep
+			transmitting = false;		//And flag the end of the transmission so ...
+		} else { // (if roger beep was enabled, this will be executed after the beep ends transmitting.
+			transmitting = false;
+			configure_baseband();
+			transmitter_model.disable();
+			if (rx_enabled)  //If audio RX is enabled and we've been transmitting
+				rxaudio(true); //Turn back on audio RX
+		}
+	}
+}
+
+void MicTXView::do_timing() {
+	if (va_enabled) {
+		if (!transmitting) {
+			// Attack
+			if (audio_level >= va_level) {
+				if ((attack_timer >> 8) >= attack_ms) {
+					decay_timer = 0;
+					attack_timer = 0;
+					set_tx(true);
+				} else {
+					attack_timer += lcd_frame_duration;
+				}
+			} else {
+				attack_timer = 0;
+			}
+		} else {
+			// Decay
+			if (audio_level < va_level) {
+				if ((decay_timer >> 8) >= decay_ms) {
+					decay_timer = 0;
+					attack_timer = 0;
+					set_tx(false);
+				} else {
+					decay_timer += lcd_frame_duration;
+				}
+			} else {
+				decay_timer = 0;
+			}
+		}
+	} else {
+		// Check for PTT release
+		const auto switches_state = get_switches_state();
+		if (!switches_state[4] && transmitting && !button_touch)		// Select button
+			set_tx(false);
+	}
+}
+
+/* Hmmmm. Maybe useless now.
+void MicTXView::on_tuning_frequency_changed(rf::Frequency f) {
+	transmitter_model.set_tuning_frequency(f);
+	//if ( rx_enabled )
+		receiver_model.set_tuning_frequency(f); //Update freq also for RX
+}
+*/
+
+void MicTXView::rxaudio(bool is_on) {
+	if (is_on) {
+		audio::input::stop();
+		baseband::shutdown();
+		
+		if (enable_am || enable_usb || enable_lsb) {
+			baseband::run_image(portapack::spi_flash::image_tag_am_audio);
+			receiver_model.set_modulation(ReceiverModel::Mode::AMAudio);	
+			if (options_mode.selected_index() < 4)
+				receiver_model.set_am_configuration(options_mode.selected_index() - 1);
+			else
+				receiver_model.set_am_configuration(0);
+		}
+		else {
+			baseband::run_image(portapack::spi_flash::image_tag_nfm_audio);
+			receiver_model.set_modulation(ReceiverModel::Mode::NarrowbandFMAudio);
+			
+		}
+		receiver_model.set_sampling_rate(3072000);
+		receiver_model.set_baseband_bandwidth(1750000);	
+//		receiver_model.set_tuning_frequency(field_frequency.value()); //probably this too can be commented out.
+		receiver_model.set_tuning_frequency(rx_frequency); // Now with seperate controls!
+		receiver_model.set_lna(rx_lna);
+		receiver_model.set_vga(rx_vga);
+		receiver_model.set_rf_amp(rx_amp);
+		receiver_model.enable();
+		audio::output::start();
+	} else {	//These incredibly convoluted steps are required for the vumeter to reappear when stopping RX.
+		//baseband::run_image(portapack::spi_flash::image_tag_nfm_audio); //There is something seriously wrong if these two lines fixes the issue with AM TX...
+		receiver_model.set_modulation(ReceiverModel::Mode::NarrowbandFMAudio);
+		receiver_model.disable();
+		baseband::shutdown();
+
+		baseband::run_image(portapack::spi_flash::image_tag_mic_tx);
+		audio::output::stop();
+		audio::input::start();
+//		transmitter_model.enable();		
+		portapack::pin_i2s0_rx_sda.mode(3);
+//		transmitting = false;
+		configure_baseband();
+//		transmitter_model.disable();
+	}
+}
+
+void MicTXView::on_headphone_volume_changed(int32_t v) {
+	//if (rx_enabled) {
+		const auto new_volume = volume_t::decibel(v - 99) + audio::headphone::volume_range().max;
+		receiver_model.set_headphone_volume(new_volume);
+	//}
+}
+
+void MicTXView::set_ptt_visibility(bool v) {
+	tx_button.hidden(!v);
+}
+
+MicTXView::MicTXView(
+	NavigationView& nav
+)
+{
+	portapack::pin_i2s0_rx_sda.mode(3);		// This is already done in audio::init but gets changed by the CPLD overlay reprogramming
+	
+	baseband::run_image(portapack::spi_flash::image_tag_mic_tx);
+	
+
+	
+	add_children({
+		&labels,
+		&vumeter,
+		&options_gain,
+//		&check_va,
+		&field_va,
+		&field_rxbw,
+		&field_va_level,
+		&field_va_attack,
+		&field_va_decay,
+//		&field_carrier,
+		&field_bw,
+		&field_rfgain,
+		&field_rfamp,
+		&field_frequency,
+		&options_tone_key,
+		&options_mode,
+		&check_rogerbeep,
+		&check_rxactive,
+		&field_volume,
+		&field_squelch,
+		&field_rxfrequency,
+		&field_rxlna,
+		&field_rxvga,
+		&field_rxamp,
+		&tx_button
+	});
+
+
+
+	tone_keys_populate(options_tone_key);
+	options_tone_key.on_change = [this](size_t i, int32_t) {
+		tone_key_index = i;
+	};
+	options_tone_key.set_selected_index(0);
+	
+	options_gain.on_change = [this](size_t, int32_t v) {
+		mic_gain = v / 10.0;
+		configure_baseband();
+	};
+	options_gain.set_selected_index(1);		// x1.0
+	
+	options_mode.on_change = [this](size_t, int32_t v) {
+		enable_am = false;
+		enable_usb = false;
+		enable_lsb = false;
+		switch(v) {
+			case 0:
+				enable_am = false;
+				enable_usb = false;
+				enable_lsb = false;
+				field_bw.set_value(transmitter_model.channel_bandwidth() / 1000);
+				//if (rx_enabled)
+					rxaudio(rx_enabled);
+				break;
+			case 1:
+				enable_am = true;
+				am_carrier_lvl = 20;
+				//if (rx_enabled)
+					rxaudio(rx_enabled);
+				break;
+			case 2:
+				enable_am = true;
+				enable_usb = true;
+				//if (rx_enabled)
+					rxaudio(rx_enabled);
+				break;
+			case 3:
+				enable_am = true;
+				enable_lsb = true;
+				
+				//if (rx_enabled)
+					rxaudio(rx_enabled);
+				break;
+			case 4:
+				enable_usb = false;
+				enable_lsb = false;
+				enable_am = true;
+				am_carrier_lvl = 0;
+				//if (rx_enabled)
+					rxaudio(rx_enabled);
+				break;
+		}
+		//configure_baseband();
+	};
+	
+	tx_frequency = transmitter_model.tuning_frequency();
+	field_frequency.set_value(transmitter_model.tuning_frequency());
+	field_frequency.set_step(receiver_model.frequency_step());
+	field_frequency.on_change = [this](rf::Frequency f) {
+		tx_frequency = f;
+		if(!rx_enabled)
+			transmitter_model.set_tuning_frequency(f);
+	};
+	field_frequency.on_edit = [this, &nav]() {
+		focused_ui = 0;
+		// TODO: Provide separate modal method/scheme?
+		auto new_view = nav.push<FrequencyKeypadView>(tx_frequency);
+		new_view->on_changed = [this](rf::Frequency f) {
+			tx_frequency = f;
+			if(!rx_enabled)
+				transmitter_model.set_tuning_frequency(f);
+			this->field_frequency.set_value(f);
+			set_dirty();
+		};
+	};
+	
+	field_rxbw.on_change = [this](size_t, int32_t v) {
+		switch(v) {
+			case 0:
+				receiver_model.set_nbfm_configuration(0);
+				break;
+			case 1:
+				receiver_model.set_nbfm_configuration(1);
+				break;
+			case 2:
+				receiver_model.set_nbfm_configuration(2);
+				break;
+		}
+	};
+	field_rxbw.set_selected_index(2);
+	
+	field_bw.on_change = [this](uint32_t v) {
+		transmitter_model.set_channel_bandwidth(v * 1000);
+	};
+	field_bw.set_value(10);
+	
+//	field_carrier.on_change = [this](uint32_t v) {
+//		am_carrier_lvl = v;
+//	};
+//	field_carrier.set_value(am_carrier_lvl);
+		tx_gain = transmitter_model.tx_gain();
+		
+	field_rfgain.on_change = [this](int32_t v) {
+		tx_gain = v;
+		
+	};
+	
+	field_rfgain.set_value(tx_gain);
+
+	rf_amp = transmitter_model.rf_amp();
+	field_rfamp.on_change = [this](int32_t v) {
+		rf_amp = (bool)v;
+	};
+	field_rfamp.set_value(rf_amp ? 14 : 0);
+	
+/*	
+	check_va.on_select = [this](Checkbox&, bool v) {
+		va_enabled = v;
+		text_ptt.hidden(v);			//hide / show PTT text
+		check_rxactive.hidden(v); 	//hide / show the RX AUDIO
+		set_dirty();				//Refresh display
+	}; */
+	
+	field_va.set_selected_index(1);
+	field_va.on_change = [this](size_t, int32_t v) {
+		switch(v) {
+			case 0:
+				va_enabled = 0;
+				this->set_ptt_visibility(0);
+				check_rxactive.hidden(0);
+				ptt_enabled = 0;
+				break;
+			case 1:
+				va_enabled = 0;
+				this->set_ptt_visibility(1);
+				check_rxactive.hidden(0);
+				ptt_enabled = 1;
+				break;
+			case 2:
+				if (!rx_enabled) {
+					va_enabled = 1;
+					this->set_ptt_visibility(0);
+					check_rxactive.hidden(1);
+					ptt_enabled = 0;
+				} else {
+					field_va.set_selected_index(1);
+				}
+				break;
+		}
+		set_dirty();
+	};
+
+	check_rogerbeep.on_select = [this](Checkbox&, bool v) {
+		rogerbeep_enabled = v;
+	};
+
+	field_va_level.on_change = [this](int32_t v) {
+		va_level = v;
+		vumeter.set_mark(v);
+	};
+	field_va_level.set_value(40);
+	
+	field_va_attack.on_change = [this](int32_t v) {
+		attack_ms = v;
+	};
+	field_va_attack.set_value(500);
+	
+	field_va_decay.on_change = [this](int32_t v) {
+		decay_ms = v;
+	};
+	field_va_decay.set_value(1000);
+
+	check_rxactive.on_select = [this](Checkbox&, bool v) {
+//		vumeter.set_value(0);	//Start with a clean vumeter
+		rx_enabled = v;
+//		check_va.hidden(v); 	//Hide or show voice activation
+		rxaudio(v);				//Activate-Deactivate audio rx accordingly
+		set_dirty();			//Refresh interface
+	};
+	
+
+	
+	//field_volume.set_value((receiver_model.headphone_volume() - audio::headphone::volume_range().max).decibel() + 99);
+	field_volume.set_value((receiver_model.headphone_volume() - audio::headphone::volume_range().max).decibel() + 99);
+	field_volume.on_change = [this](int32_t v) { this->on_headphone_volume_changed(v);	};
+
+	field_squelch.on_change = [this](int32_t v) { 
+		receiver_model.set_squelch_level(100 - v);	
+	};
+	field_squelch.set_value(0);
+	receiver_model.set_squelch_level(0);
+
+	rx_frequency = receiver_model.tuning_frequency();
+	field_rxfrequency.set_value(rx_frequency);
+	field_rxfrequency.set_step(receiver_model.frequency_step());
+	
+	field_rxfrequency.on_change = [this](rf::Frequency f) {
+		rx_frequency = f;
+		if(rx_enabled)
+			receiver_model.set_tuning_frequency(f);
+	};
+	field_rxfrequency.on_edit = [this, &nav]() {
+		focused_ui = 1;
+		// TODO: Provide separate modal method/scheme?
+		auto new_view = nav.push<FrequencyKeypadView>(rx_frequency);
+		new_view->on_changed = [this](rf::Frequency f) {
+			rx_frequency = f;
+			if(rx_enabled)
+				receiver_model.set_tuning_frequency(f);
+			this->field_rxfrequency.set_value(f);
+			set_dirty();
+		};
+	};
+
+	
+	rx_lna = receiver_model.lna();
+	field_rxlna.on_change = [this](int32_t v) {
+		rx_lna = v;
+		if(rx_enabled)
+			receiver_model.set_lna(v);
+	};
+	field_rxlna.set_value(rx_lna);
+
+	rx_vga = receiver_model.vga();
+	field_rxvga.on_change = [this](int32_t v) {
+		rx_vga = v;
+		if(rx_enabled)
+			receiver_model.set_vga(v);
+	};
+	field_rxvga.set_value(rx_vga);
+
+	rx_amp = receiver_model.rf_amp();
+
+	field_rxamp.on_change = [this](int32_t v) {
+		rx_amp = v;
+		if(rx_enabled)
+			receiver_model.set_rf_amp(rx_amp);
+	};
+	field_rxamp.set_value(rx_amp);
+	receiver_model.set_rf_amp(rx_amp);
+
+	tx_button.on_select = [this](Button&) {
+		if(ptt_enabled && !transmitting) {
+			set_tx(true);
+		}
+	};
+
+	tx_button.on_touch_release = [this](Button&) {
+		if(button_touch) {
+			button_touch = false;
+			set_tx(false);
+		}
+	};
+
+	tx_button.on_touch_press = [this](Button&) {
+		if(!transmitting) {
+			button_touch = true;
+		}	
+	};
+
+	transmitter_model.set_sampling_rate(sampling_rate);
+	transmitter_model.set_baseband_bandwidth(1750000);
+	
+	set_tx(false);
+	
+	audio::set_rate(audio::Rate::Hz_24000);
+	audio::input::start();
+}
+
+MicTXView::~MicTXView() {
+	
+	audio::input::stop();
+	transmitter_model.set_tuning_frequency(tx_frequency); // Save Tx frequency instead of Rx. Or maybe we need some "System Wide" changes to seperate Tx and Rx frequency.
+	transmitter_model.disable();
+	if (rx_enabled) //Also turn off audio rx if enabled
+		rxaudio(false);
+	baseband::shutdown();
+}
+
+}

firmware/application/apps/ui_mictx.hpp

@@ -99,19 +99,27 @@ private:
 	int32_t focused_ui { 2 };
 	bool button_touch { false };
 
+	//AM TX Stuff
+	bool enable_am { false };
+	bool enable_dsb { false };
+	bool enable_usb { false };
+	bool enable_lsb { false };
+
 	
 	Labels labels {
 		{ { 3 * 8, 1 * 8 }, "MIC. GAIN:", Color::light_grey() },
 		{ { 3 * 8, 3 * 8 }, "F:", Color::light_grey() },
-		{ { 15 * 8, 3 * 8 }, "BW:   kHz", Color::light_grey() },
+		{ { 15 * 8, 3 * 8 }, "BW:   FM kHz", Color::light_grey() },
 		{ { 3 * 8, 5 * 8 }, "GAIN:", Color::light_grey() },
 		{ {11 * 8, 5 * 8 }, "Amp:", Color::light_grey() },
+		{ { 18 * 8, (5 * 8) }, "Mode:", Color::light_grey() },
 		{ { 3 * 8, 8 * 8 }, "TX Activation:", Color::light_grey() },
 		{ { 4 * 8, 10 * 8 }, "LVL:", Color::light_grey() },
 		{ {12 * 8, 10 * 8 }, "ATT:", Color::light_grey() },
 		{ {20 * 8, 10 * 8 }, "DEC:", Color::light_grey() },
 		{ { 4 * 8, ( 13 * 8 ) - 2 }, "TONE KEY:", Color::light_grey() },
 		{ { 9 * 8, 23 * 8 }, "VOL:", Color::light_grey() },
+		{ {17 * 8, 23 * 8 }, "FM RXBW:", Color::light_grey() },
 		{ {17 * 8, 25 * 8 }, "SQ:", Color::light_grey() },
 		{ { 5 * 8, 25 * 8 }, "F:", Color::light_grey() },
 		{ { 5 * 8, 27 * 8 }, "LNA:", Color::light_grey()},
@@ -162,6 +170,18 @@ private:
 		14,
 		' '
 	};
+	
+	OptionsField options_mode {
+		{ 24 * 8, 5 * 8 },
+		3,
+		{
+			{ "FM", 0 },
+			{ "AM", 1 },
+			{ "USB", 2 },
+			{ "LSB", 3 },
+			{ "DSB", 4 }
+		}
+	};
 	/*
 	Checkbox check_va {
 		{ 3 * 8, (10 * 8) - 4 },
@@ -231,6 +251,16 @@ private:
 		' ',
 	};
 	
+	OptionsField field_rxbw {
+	       { 25 * 8, 23 * 8},
+	       3,
+	       {
+	       		{"8k5", 0},
+	       		{"11k", 1},
+	       		{"16k", 2}
+	       	}
+	};
+	
 	NumberField field_squelch {
 		{ 20 * 8, 25 * 8 },
 		2,

firmware/application/apps/ui_mictx.hpp.1

@@ -0,0 +1,344 @@
+/*
+ * Copyright (C) 2015 Jared Boone, ShareBrained Technology, Inc.
+ * Copyright (C) 2016 Furrtek
+ *
+ * This file is part of PortaPack.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.  If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+
+#ifndef __UI_MICTX_H__
+#define __UI_MICTX_H__
+
+#include "ui.hpp"
+#include "ui_widget.hpp"
+#include "ui_navigation.hpp"
+#include "ui_receiver.hpp"
+#include "transmitter_model.hpp"
+#include "tone_key.hpp"
+#include "message.hpp"
+#include "receiver_model.hpp"
+
+namespace ui {
+
+class MicTXView : public View {
+public:
+	MicTXView(NavigationView& nav);
+	~MicTXView();
+
+	MicTXView(const MicTXView&) = delete;
+	MicTXView(MicTXView&&) = delete;
+	MicTXView& operator=(const MicTXView&) = delete;
+	MicTXView& operator=(MicTXView&&) = delete;
+	
+	void focus() override;
+	
+	// PTT: Enable through KeyEvent (only works with presses), disable by polling :(
+	// This is the old "RIGHT BUTTON" method.
+	
+/*	bool on_key(const KeyEvent key) {
+		if ((key == KeyEvent::Right) && (!va_enabled) && ptt_enabled) {
+			set_tx(true);
+			return true;
+		} else
+			return false;
+	};  */
+	
+
+	std::string title() const override { return "Mic TX RX"; };
+
+private:
+	static constexpr uint32_t sampling_rate = 1536000U;
+	static constexpr uint32_t lcd_frame_duration = (256 * 1000UL) / 60;	// 1 frame @ 60fps in ms .8 fixed point  /60
+	
+	void update_vumeter();
+	void do_timing();
+	void set_tx(bool enable);
+//	void on_tuning_frequency_changed(rf::Frequency f);
+	void on_tx_progress(const bool done);
+	void configure_baseband();
+
+	void rxaudio(bool is_on);
+	void on_headphone_volume_changed(int32_t v);
+
+	void set_ptt_visibility(bool v);
+	
+	bool transmitting { false };
+	bool va_enabled { false };
+	bool ptt_enabled { true };
+	bool rogerbeep_enabled { false };
+	bool rx_enabled { false };
+	uint32_t tone_key_index { };
+	float mic_gain { 1.0 };
+	uint32_t audio_level { 0 };
+	uint32_t va_level { };
+	uint32_t attack_ms { };
+	uint32_t decay_ms { };
+	uint32_t attack_timer { 0 };
+	uint32_t decay_timer { 0 };
+	int32_t tx_gain { 47 };
+    	bool rf_amp { false };
+	int32_t rx_lna { 32 };
+	int32_t rx_vga { 32 };
+	bool rx_amp { false };
+	rf::Frequency tx_frequency { 0 };
+	rf::Frequency rx_frequency { 0 };
+	int32_t focused_ui { 2 };
+	bool button_touch { false };
+	
+	//AM TX Stuff
+	bool enable_usb { false };
+	bool enable_lsb { false };
+	bool enable_am { false };
+	uint32_t am_carrier_lvl { 20 };
+//	uint32_t am_mod_div { 1 }; 
+
+	
+	Labels labels {
+		{ { 3 * 8, 1 * 8 }, "MIC. GAIN:", Color::light_grey() },
+		{ { 3 * 8, 3 * 8 }, "F:", Color::light_grey() },
+		{ { 15 * 8, 3 * 8 }, "BW:    FM kHz", Color::light_grey() },
+		{ { 3 * 8, 5 * 8 }, "GAIN:", Color::light_grey() },
+		{ {11 * 8, 5 * 8 }, "Amp:", Color::light_grey() },
+		{ { 18 * 8, (5 * 8) }, "Mode:", Color::light_grey() },
+//		{ { 21 * 8, (1 * 8) }, "AM Car:", Color::light_grey() },
+//		{ { 20 * 8, (16 * 8) + 2 }, "AMCAR:", Color::light_grey() },
+		{ { 3 * 8, 8 * 8 }, "TX Activation:", Color::light_grey() },
+		{ { 4 * 8, 10 * 8 }, "LVL:", Color::light_grey() },
+		{ {12 * 8, 10 * 8 }, "ATT:", Color::light_grey() },
+		{ {20 * 8, 10 * 8 }, "DEC:", Color::light_grey() },
+		{ { 4 * 8, ( 13 * 8 ) - 2 }, "TONE KEY:", Color::light_grey() },
+		{ { 5 * 8, 23 * 8 }, "VOL:", Color::light_grey() },
+		{ {17 * 8, 23 * 8 }, "FM RXBW:", Color::light_grey() },
+		{ {17 * 8, 25 * 8 }, "SQ:", Color::light_grey() },
+		{ { 5 * 8, 25 * 8 }, "F:", Color::light_grey() },
+		{ { 5 * 8, 27 * 8 }, "LNA:", Color::light_grey()},
+		{ {12 * 8, 27 * 8 }, "VGA:", Color::light_grey()},
+		{ {19 * 8, 27 * 8 }, "AMP:", Color::light_grey()}
+	};
+	
+	VuMeter vumeter {
+		{ 0 * 8, 1 * 8, 2 * 8, 33 * 8 },
+		12,
+		true
+	};
+
+	
+	OptionsField options_gain {
+		{ 13 * 8, 1 * 8 },
+		4,
+		{
+			{ "x0.5", 5 },
+			{ "x1.0", 10 },
+			{ "x1.5", 15 },
+			{ "x2.0", 20 }
+		}
+	};
+	OptionsField options_mode {
+		{ 24 * 8, 5 * 8 },
+		3,
+		{
+			{ "FM", 0 },
+			{ "AM", 1 },
+			{ "USB", 2 },
+			{ "LSB", 3 },
+			{ "DSB", 4 }
+		}
+	};
+	
+	FrequencyField field_frequency {
+		{ 5 * 8, 3 * 8 },
+	};
+	NumberField field_bw {
+		{ 18 * 8, 3 * 8 },
+		3,
+		{ 0, 150 },
+		1,
+		' '
+	};
+	
+/*	NumberField field_carrier {
+		{ 28 * 8, 1 * 8},
+		2,
+		{ 0, 99},
+		1,
+		' '
+	};*/
+	
+	NumberField field_rfgain {
+		{ 8 * 8, 5 * 8 },
+		2,
+		{ 0, 47 },
+		1,
+		' '
+	};
+	NumberField field_rfamp {
+		{ 15 * 8, 5 * 8 },
+		2,
+		{ 0, 14 },
+		14,
+		' '
+	};
+	
+	/*Checkbox check_va {
+		{ 3 * 8, (10 * 8) - 4 },
+		7,
+		"Voice activation",
+		false
+	};*/
+	
+
+	OptionsField field_va {
+		{ 17 * 8, 8 * 8 },
+		3,
+		{
+			{" OFF", 0},
+			{" PTT", 1},
+			{"AUTO", 2}
+		}
+	};
+	
+	OptionsField field_rxbw {
+	       { 25 * 8, 23 * 8},
+	       3,
+	       {
+	       		{"8k5", 0},
+	       		{"11k", 1},
+	       		{"16k", 2}
+	       	}
+	};
+
+	NumberField field_va_level {
+		{ 8 * 8, 10 * 8 },
+		3,
+		{ 0, 255 },
+		2,
+		' '
+	};
+	NumberField field_va_attack {
+		{ 16 * 8, 10 * 8 },
+		3,
+		{ 0, 999 },
+		20,
+		' '
+	};
+	NumberField field_va_decay {
+		{ 24 * 8, 10 * 8 },
+		4,
+		{ 0, 9999 },
+		100,
+		' '
+	};
+	
+	OptionsField options_tone_key {
+		{ 10 * 8, ( 15 * 8 ) - 2 },
+		23,
+		{ }
+	};
+
+	Checkbox check_rogerbeep {
+		{ 3 * 8, ( 16 * 8 ) + 4 },
+		10,
+		"Roger beep",
+		false
+	};
+
+	Checkbox check_rxactive {
+		{ 3 * 8, ( 21 * 8 ) - 4 },
+		8,
+		"RX audio listening",
+		true
+	};
+
+	NumberField field_volume {
+		{ 10 * 8, 23 * 8 },
+		2,
+		{ 0, 99 },
+		1,
+		' ',
+	};
+	
+	NumberField field_squelch {
+		{ 20 * 8, 25 * 8 },
+		2,
+		{ 0, 99 },
+		1,
+		' ',
+	};
+
+	FrequencyField field_rxfrequency {
+		{ 7 * 8, 25 * 8 },
+	};
+
+	NumberField field_rxlna {
+		{ 9 * 8, 27 * 8 },
+		2,
+		{ 0, 40 },
+		8,
+		' ',
+	};
+
+	NumberField field_rxvga {
+		{ 16 * 8, 27 * 8 },
+		2,
+		{ 0, 62 },
+		2,
+		' ',
+	};
+
+	NumberField field_rxamp {
+		{ 23 * 8, 27 * 8 },
+		1,
+		{ 0, 1 },
+		1,
+		' ',
+	};
+
+	Button tx_button {
+		{ 10 * 8, 30 * 8, 10 * 8, 5 * 8 },
+		"TX",
+		true
+	};
+
+
+	MessageHandlerRegistration message_handler_lcd_sync {
+		Message::ID::DisplayFrameSync,
+		[this](const Message* const) {
+			this->do_timing();
+			this->update_vumeter();
+		}
+	};
+	
+	MessageHandlerRegistration message_handler_audio_level {
+		Message::ID::AudioLevelReport,
+		[this](const Message* const p) {
+			const auto message = static_cast<const AudioLevelReportMessage*>(p);
+			this->audio_level = message->value;
+		}
+	};
+	
+	MessageHandlerRegistration message_handler_tx_progress {
+		Message::ID::TXProgress,
+		[this](const Message* const p) {
+			const auto message = *reinterpret_cast<const TXProgressMessage*>(p);
+			this->on_tx_progress(message.done);
+		}
+	};
+};
+
+} /* namespace ui */
+
+#endif/*__UI_MICTX_H__*/