GullCode
5f62926af3
Fixed typo
2022-11-20 18:02:54 +01:00
GullCode
17f6475506
Added/Renamed AM bandwidth modes
2022-11-20 17:44:11 +01:00
Brumi-2021
1e4c93b979
Final opt. AM-9K, applied to Audio_RX and Mic App.
2022-11-19 18:17:54 +01:00
Brumi-2021
25dfa96257
Adding FIR_taps for EU AM broadcasting 9K00A3E
2022-11-14 00:32:29 +01:00
Belousov Oleg
f59437cf71
New spectrum color scheme
2022-11-10 02:17:04 +03:00
GullCode
5577ec82ed
Merge pull request #729 from BehleZebub/patch-1
...
Update generate_world_map.bin.py
2022-11-02 17:54:42 +01:00
GullCode
da98e7739e
Update generate_world_map.bin.py
...
Formatting text
2022-11-02 17:21:56 +01:00
GullCode
b5b5bf42af
Merge pull request #737 from BehleZebub/next
...
update for python scripts so no python2.7 is needed
2022-11-02 17:14:53 +01:00
BehleZebub
587fbfbbb1
added shebang line for pyhton3 on unix
2022-11-02 00:36:04 +01:00
lujji
22de89c879
added gain and amp controls
2022-11-01 06:42:55 +02:00
GullCode
aa778e5797
Merge pull request #738 from Brumi-2021/Extending_previous_ghost_signal_interference_c/m_in_all_RX_after_using_Replay_App
...
(MINOR IMPROV Replay App) - Extending previous "ghost interf. signal" c/m to Replay App
2022-10-30 20:15:24 +01:00
Brumi-2021
e8e98475e2
Extending "ghost interf. signal" c/m to Replay App
2022-10-30 19:23:52 +01:00
BehleZebub
95d1bca9fd
changed from python2 to python3
2022-10-30 00:04:31 +02:00
BehleZebub
1a5c360efe
changed from python2 to python3
2022-10-30 00:04:07 +02:00
BehleZebub
560c7143bf
Update make_dcs.py
2022-10-30 00:03:07 +02:00
BehleZebub
6fc03a2651
changed from python2 to python3
2022-10-30 00:02:01 +02:00
BehleZebub
f31ee1172d
changed from python2 to python3
2022-10-30 00:00:55 +02:00
BehleZebub
996e648a64
changed from python2 to python3
2022-10-30 00:00:26 +02:00
BehleZebub
ca4f68d24a
changed from python2 to python3
2022-10-29 23:58:26 +02:00
Brumi-2021
a591ba572f
Mic App: DSB RX distortion c/m + minor improv.
2022-10-29 16:02:08 +02:00
BehleZebub
c9657bc92b
Update generate_world_map.bin.py
...
corrected typo in print();
2022-10-28 17:38:00 +02:00
BehleZebub
b8d98e4f45
Update generate_world_map.bin.py
...
forced endianess on outfile.write() to little endian and closed outfile at the end
2022-10-22 23:42:40 +02:00
GullCode
e0309b13e5
Merge pull request #728 from GullCode/fix-wfm-bw-label
...
Fix wfm bw label
2022-10-18 21:38:21 +02:00
GullCode
c2117b2c5b
cosmetic fix for bw display
2022-10-18 21:37:28 +02:00
GullCode
2b78f9e907
Correct WFM bw label to 200k
2022-10-18 21:36:22 +02:00
GullCode
6cd4eb0358
Correct WFM bandwidth and step
2022-10-18 21:26:14 +02:00
Brumi-2021
efe8d82fae
Add WFM mode in Mic App (in tx and rx)
2022-10-16 19:01:05 +02:00
GullCode
32697d1c73
Merge pull request #723 from GullCode/recon-freqman-steps-band-update
...
Recon freqman steps band update
2022-10-11 12:52:23 +02:00
GullCode
a9b4abc07e
Indenting some comments
2022-10-11 12:48:42 +02:00
GullCode
05f3793213
Added 30Khz steps and removed quoted code
2022-10-11 12:46:12 +02:00
GullCode
ae8633c569
Use FREQMAN_MAX_PER_FILE instead of MAX_DB_ENTRY
2022-10-11 12:40:49 +02:00
GullCode
480f492740
Removed MAX_DB_ENTRY definition
2022-10-11 12:40:31 +02:00
GullCode
dd2e23f901
Updated FREQMAN_MAX_PER_FILE value
2022-10-11 12:40:08 +02:00
GullCode
e76faf6edd
Merge pull request #717 from Brumi-2021/Recovered_ALC_AK4953_Mic_App_feature_solving_WM8731_side_effects
...
Adding Mic Control gain in both platforms : mic Auto volume Level Control (AK4951) and mic Boost control (WM8731)
2022-10-09 21:50:43 +02:00
GullCode
5474487751
Merge pull request #696 from andrej-mk/ook
...
Increase max OOK clock
2022-10-09 18:23:33 +02:00
GullCode
e6cf04e511
Update ui_encoders.hpp
...
Proper indentation
2022-10-09 18:22:23 +02:00
GullCode
1d521819ff
Merge pull request #711 from GullCode/recon-app
...
Recon app
2022-10-08 13:46:50 +02:00
GullCode
83f7c9ae63
Merge pull request #707 from Brumi-2021/try_to_solve_RX_ghost_signal_issue_#637
...
Solve previous regression fw 1.3.1 -->fw 1.4.0 onwards , about RX ghost signal issue #637
2022-10-07 22:17:10 +02:00
Brumi-2021
6b75249b0a
Finalised all Mic Boost(WM) and Mic ALC(AK)
2022-10-02 00:51:12 +02:00
Brumi-2021
745574d3c4
Ak4951-ALC_base adding WM8731-boost OFF options
2022-09-28 22:42:33 +02:00
Jimi Sanchez
c80595db7e
Merge pull request #535 from jimilinuxguy/jimi-merging-conflicts
...
Playlist replay application
2022-09-19 17:48:11 -04:00
Jimi Sanchez
040dded2a6
Merges latest firmware into feature branch
2022-09-19 17:35:28 -04:00
Jimi Sanchez
958c9a1bfa
Merge pull request #4 from jimilinuxguy/replayapp
...
Replayapp
2022-09-19 13:13:21 -04:00
Jimi Sanchez
861db600e8
Merge branch 'replayapp' into master
2022-09-19 13:12:15 -04:00
GullCode
9086f32a63
Added Recon app persistent settings
2022-09-13 23:58:03 +02:00
GullCode
9d59c07855
Added Recon app under 'Receive' menu
2022-09-13 23:58:03 +02:00
GullCode
0d18aa47f3
Added Recon files to CMake list
2022-09-13 23:58:03 +02:00
GullCode
cf40f5eb14
Added ButtonWithEncoder
2022-09-13 23:58:03 +02:00
GullCode
fe4bc7902f
Added access to min/med/max values
2022-09-13 23:58:03 +02:00
GullCode
5d5865eefb
Added tone to string and string to tone
2022-09-13 23:58:03 +02:00
GullCode
a7370ee95d
Added new file format funcs
2022-09-13 23:58:03 +02:00
GullCode
223cd7c20d
added Recon files
2022-09-13 23:58:03 +02:00
Erwin Ried
1be3167748
Merge pull request #710 from Brumi-2021/Increase_freq_step_resolution
...
Very minor change , add 10 & 50Hz freq. steps , SSB in HF and Qo-100_sat_#669
2022-09-12 09:24:25 +02:00
Brumi-2021
1bbd889005
Very minor change , add 10/50Hz freq. step #669
2022-09-06 21:01:09 +02:00
Erwin Ried
d87e9853a1
Merge pull request #705 from Brumi-2021/Bias_DC_Voltage_not_working_in_TPMS_&_ERT_#700
...
Adding Bias dc voltage not working in tpms & ert (previous issue #700 )
2022-09-05 10:14:47 +02:00
Brumi-2021
6087c658e9
Applied ghost-signal c/m to all remaining TX Apps
2022-08-27 17:47:24 +02:00
Brumi-2021
08a108d3e4
First test, ghost-singal c/m to only Mic_App
2022-08-26 18:34:30 +02:00
Brumi-2021
5021a03572
Minor change radio,disable-->receiver.disable
2022-08-23 00:04:48 +02:00
Brumi-2021
961a4c4588
Addition_bias_DC_ERP_TPMS
2022-08-21 19:59:15 +02:00
Arne Luehrs
a89d418202
AIS Decoding, destination text display fix
...
Remove trailing null characters '@' from display of destination field
2022-08-15 14:41:07 +08:00
Arne Luehrs
1e14ca4df1
Enable AIS-B decoding and display
...
Implement decoding for AIS messages 18 and 24A 24B
clean up display of text messages by removing the trailing null
character '@'
2022-08-15 13:56:40 +08:00
Arne Luehrs
5096f91986
Add AIS Class B Decoding
2022-08-15 00:12:24 +08:00
andrej
87418703e0
Make clk and frame duration steps in OOK configurable
2022-08-01 08:40:26 +02:00
andrej
e33c98cbc7
Increase maximum OOK clock to 1000 kHz
2022-08-01 08:40:16 +02:00
Timo Taskinen
50bd08d9ff
Fix AM bandwidth and sampling rate in scanner ( #671 )
...
In scanner app, the bandwidth and sampling rate for AM modulation was incorrect. This resulted in high pitched and distorted sound. I have now copied the settings from the Audio receiver app, and now the sound in Scanner sounds good also in AM mode.
2022-06-07 11:05:17 +12:00
jLynx
39134b62c3
Fix for new H2+ devices ( #666 )
...
* WIP Fix for new h2+ devices
* reset
* Updated sub module
2022-06-05 14:15:44 +12:00
Jared Boone
e5a30b4309
Persistent memory check value verification, defaulting when fails. ( #662 )
...
* Make default constructor for touch calibration
* Add persistent memory check value and access abstraction.
* Add persistent data_t default constructor with reasonable defaults.
* serial_format_t default constructor.
* Tidy up backlight timeout type.
* Add persistent data struct version/checking.
* Make range_t functions constexpr.
* Move ui_config and functions into class.
* Add backlight_config_t struct, separate enable and time settings.
2022-05-29 08:55:18 +12:00
Brumi-2021
379ad6dbf0
Recovered_ALC_Mic_Feature_AK4953_OK_WM8731
2022-05-28 22:29:10 +02:00
ArjanOnwezen
a3ee160e27
Merge pull request #643 from ArjanOnwezen/save-more-app-settings
...
Save most common settings for TX apps
2022-05-13 21:42:51 +02:00
Arjan Onwezen
ade0d6c68f
French translations.
2022-05-13 09:31:58 -04:00
Arjan Onwezen
e97ffd42ef
Set fixed modulation (WFM) for Pocsag app.
2022-05-13 09:04:53 -04:00
Arjan Onwezen
cccc92cc34
Save most common settings for TX apps. And translated some French apps along the way.
2022-05-13 08:38:04 -04:00
MattLodge
6c5f8a38e0
Update generate_world_map.bin.py ( #640 )
...
Use bytes instead of strings to write ADSB map binary for python3
2022-05-09 07:27:15 +12:00
Brumi-2021
de1570d8af
Allow change initial gain amp values just opened file ( #634 )
...
* Update spectrum_collector.cpp
lower case correction
* Update spectrum_collector.cpp
Description changed , better explanation.
* Revert "Update spectrum_collector.cpp"
This reverts commit 4a6fc3538435cece1cb0f4db4e2b53
2022-05-07 11:43:55 +12:00
Brumi-2021
1027e80d53
Recovered lost ctcss/roger beep/correct mic gain in mic app from 1.5.1 without ALC (Auto mic Limit Control-AK) ( #633 )
...
* Update spectrum_collector.cpp
lower case correction
* Update spectrum_collector.cpp
Description changed , better explanation.
* Revert "Update spectrum_collector.cpp"
This reverts commit 4a6fc3538435cece1cb0f4db4e2b53
2022-05-07 11:43:14 +12:00
TqMatvey
367cb318cd
Fix KeyFob (beta) being off-screen
2022-05-05 18:06:15 +07:00
jLynx
fe33c12111
Sound/white noise Clock fix ( #625 )
2022-05-05 08:31:54 +12:00
GullCode
5551c6a676
Fixing branch, moving block, adding quote
2022-05-04 10:29:12 +02:00
GullCode
2b7b0d028a
Merge branch 'touch_return_option' of github.com:GullCode/portapack-mayhem into touch_return_option
2022-05-03 14:42:40 +02:00
GullCode
7b42d9ec94
changed label to fit the screen
2022-05-03 14:34:55 +02:00
GullCode
0580a528e4
Merge branch 'next' into touch_return_option
2022-05-03 14:31:03 +02:00
GullCode
c75c4685cd
Added a ui_config flag to manage gui return icon status
2022-05-03 14:23:58 +02:00
Arjan Onwezen
799a473b36
Save individual app settings. Currently only for apps in Receive section and basic settings like, LNA, VGA, Rx Amp and Frequency.
2022-05-01 06:09:02 -04:00
Jimi Sanchez
2efab19bf6
Merge branch 'next' of https://github.com/jimilinuxguy/portapack-mayhem into next
2022-04-28 17:06:50 -04:00
Jimi Sanchez
4562228b55
Fixing spelling of Wav Viewer
2022-04-28 17:06:45 -04:00
Jimi Sanchez
6af0d4e751
Merge branch 'next' into jimi-merging-conflicts
2022-04-28 17:03:24 -04:00
Jimi Sanchez
0fed174a80
Adding back wipe sd
2022-04-28 16:58:44 -04:00
Jimi Sanchez
d71c759480
Merge branch 'next' into jimi-merging-conflicts
2022-04-28 13:55:44 -04:00
Jimi Sanchez
c1e568f62c
Removing wipe sd
2022-04-28 13:54:17 -04:00
Jimi Sanchez
f48980e381
Adding playlist to CMakeLists
2022-04-28 13:52:47 -04:00
Žiga Deisinger
ee9b4c89bd
Fix #494 - Change App Titles
...
I choose what I think are the best Titles based on existing titles/class names and so on. There were also inconsistencies between TX and Transmit and RX and receive. I renamed them to shorter version TX and RX also added it as suffix where possible to make it clearer in what mode you are in. If you have any other title suggestions or changes please use Add comment on Files Changed Screen so I can change it.
2022-04-26 23:09:24 +02:00
Erwin Ried
a91bbe6a2e
Merge pull request #596 from GullCode/proc-adsbrx-warning-fix
...
Fix for warning: comparison of integer expressions of different signedness
2022-04-22 10:00:05 +02:00
Erwin Ried
a5a9bc85f8
Merge pull request #597 from GullCode/proc-aprsrx-warning-fix
...
Fix for proc_aprsrx and aprs_packet warnings, they are related
2022-04-22 09:59:31 +02:00
Erwin Ried
b23addd452
Merge pull request #598 from GullCode/tpms-warning-fix
...
Fix for warning: narrowing conversion
2022-04-22 09:59:21 +02:00
Erwin Ried
6467e5e7e6
Merge pull request #599 from GullCode/proc_mictx-warning-fix
...
Fix for warning: 'MicTXProcessor::modulator' should be initialized
2022-04-22 09:59:08 +02:00
Erwin Ried
35ed394b37
Merge pull request #601 from GullCode/ais_app-warning-fix
...
Added missing contructors/operators/etc in ais_app
2022-04-22 09:59:01 +02:00
Erwin Ried
4c98cf16a1
Merge pull request #600 from GullCode/ui_qrcode-warning-fix
...
Fix for weffc++
2022-04-22 08:19:43 +02:00
Erwin Ried
18be6750e5
Merge pull request #602 from GullCode/ui_adsb_rx-warning-fix
...
Added missing initializer
2022-04-22 08:19:03 +02:00
GullCode
3fa190324b
Fix warning for proc_pocsag
2022-04-21 23:25:58 +02:00
GullCode
de042df7eb
Added missing initializer
2022-04-21 23:12:37 +02:00
