Commit Graph

2401 Commits

Author SHA1 Message Date
Jared Boone
5ec8164e07 Sync up recent portapack-hackrf changes. (#229)
* Power: Turn off additional peripheral clock branches.

* Update schematic with new symbol table and KiCad standard symbols.
Fix up wires.

* Schematic: Update power net labels.

* Schematic: Update footprint names to match library changes.

* Schematic: Update header vendor and part numbers.

* Schematic: Specify (arbitrary) value for PDN# net.

* Schematic: Remove fourth fiducial. Not standard practice, and was taking up valuable board space.

* Schematic: Add reference oscillator -- options for clipped sine or HCMOS output.

* Schematic: Update copyright year.

* Schematic: Remove CLKOUT to CPLD. It was a half-baked idea.

* Schematic: Add (experimental) GPS circuit.
Add note about charging circuit.
Update date and revision to match PCB.

* PCB: Update from schematic change: now revision 20180819.
Diff was extensive due to net renumbering...

* PCB: Fix GPS courtyard to accommodate crazy solder paste recommendation in integration manual.
PCB: Address DRC clearance violation between via and oscillator pad.

* PCB: Update copyright on drawing.

* Update schematic and PCB date and revision.

* gitignore: Sublime Text editor project/workspace files

* Power: Power up or power down peripheral clock at appropriate times, so firmware doesn't freeze...

* Clocking: Fix incorrect shift for CGU IDIVx_CTRL.PD field.

* LPC43xx: Add CGU IDIVx struct/union type.

* Power: Switch off unused IDIV dividers. Make note of active IDIVs and their use.

* HackRF Mode: Upgrade firmware to 2018.01.1 (API 1.02)

* MAX V CPLD: Refactor class to look more like Xilinx CoolRunner II CPLD class.

* MAX V CPLD: Add BYPASS, SAMPLE support.
Rename enter_isp -> enable, exit_isp -> disable.
Use SAMPLE at start of flash process, which somehow addresses the problem where CFM wouldn't load into SRAM (and become the active bitstream) after flashing.

* MAX V CPLD: Reverse verify data checking logic to make it a little faster.

* CPLD: After reprogramming flash, immediately clamp I/O signals, load to SRAM, and "execute" the new bitstream.

* Si5351: Refactor code, make one of the registers more type-safe.
Clock Manager: Track selected reference clock source for later use in user interface.

* Clock Manager: Add note about PPM only affecting Si5351C PLLA, which always runs from the HackRF 25MHz crystal.
It is assumed an external clock does not need adjustment, though I am open to being convinced otherwise...

* PPM UI: Show "EXT" when showing PPM adjustment and reference clock is external.

* CPLD: Add pins and logic for new PortaPack hardware feature(s).

* CPLD: Bitstream to support new hardware features.

* Clock Generator: Add a couple more setter methods for ClockControl registers.

* Clock Manager: Use shared MCU CLKIN clock control configuration constant.

* Clock Manager: Reduce MCU CLKIN driver current. 2mA should be plenty.

* Clock Manager: Remove redundant clock generator output enable.

* Bootstrap: Remove unnecessary ldscript hack to locate SPIFI mode change code in RAM.

* Bootstrap: Get CPU operating at max frequency as soon as possible.
Update SPIFI speed comment.
Make some more LPC43xx types into unions with uint32_t.

* Bootstrap: Explicitly configure IDIVB for SPIFI, despite LPC43xx bootloader setting it.

* Clock Manager: Init peripherals before CPLD reconfig. Do the clock generator setup after, so we can check presence of PortaPack reference clock with the help of the latest CPLD bitstream.

* Clock Manager: Reverse sense of conditional that determines crystal or non-crystal reference source. This is for an expected upcoming change where multiple external options can be differentiated.

* Bootstrap: Consolidate clock configuration, update SPIFI rate comment.

* Clock Manager: Use IDIVA for clock source for all peripherals, instead of PLL1. Should make switching easier going forward.
Don't use IRC as clock during initial clock manager configuration. Until we switch to GP_CLKIN, we should go flat out...

* ChibiOS M0: Change default clock speed to 204MHz, since bootstrap now maxes out clock speed before starting M0 execution.

* PortaPack IO: Expose method to set reference oscillator enable pin.

* Pin configuration: Do SPIFI pin config with other pins, in preparation for eliminating separate bootloader.

* Pin configuration: Disable input buffers on pins that are never read.

* Revert "ChibiOS M0: Change default clock speed to 204MHz, since bootstrap now maxes out clock speed before starting M0 execution."

This reverts commit c0e2bb6cc4cc656769323bdbb8ee5a16d2d5bb03.

* PCB: Change PCB stackup, Tg, clarify solder mask color, use more metric.

* PCB: Move HackRF header P9 to B.CrtYd layer.

* PCB: Change a Tg reference I missed.

* PCB: Update footprints for parts with mismatched CAD->tape rotation.
Adjust a few layer choice and line thickness bits.

* PCB: Got cold feet, switched back to rectangular pads.

* PCB: Add Eco layers to be visible and Gerber output.

* PCB: Use aux origin for plotting, for tidier coordinates.

* PCB: Output Gerber job file, because why not?

* Schematic: Correct footprints for two reference-related components.

* Schematic: Remove manfuacturer and part number for DNP component.

* Schematic: Specify resistor value, manufacturer, part number for reference oscillator series termination.

* PCB: Update netlist and footprints from schematic.

* Netlist: Updated component values, footprints.

* PCB: Nudge some components and traces to address DRC clearance violations.

* PCB: Allow KiCad to update zone timestamps (again?!).

* PCB: Generate *all* Gerber layers.

* Schematic, PCB: Update revision to 20181025.

* PCB: Adjust fab layer annotations orientation and font size.

* PCB: Hide mounting hole reference designators on silk layer.

* PCB: Shrink U1, U3 pads to get 0.2mm space between pads.

* PCB: Set pad-to-mask clearance to zero, leave up to fab. Set minimum mask web to 0.2mm for non-black options.

* PCB: Revise U1 pad shape, mask, paste, thermal drills.
Clearance is improved at corner pads.

* PCB: Tweak U3 for better thermal pad/drill/mask/paste design.

* PCB: Change solder mask color to blue.

* Schematic, PCB: Update revision to 20181029.

* PCB: Bump minimum mask web down a tiny bit because KiCad is having trouble with math.

* Update schematic

* Remove unused board files.

* Add LPC43xx functions.

* chibios: Replace code with per-peripheral structs defining clocks, interrupts, and reset bits.

* LPC43xx: Add MCPWM peripheral struct.

* clock generator: Use recommended PLL reset register value.

Datasheet recommends a value. AN619 is quiet on the topic, claims the low nibble is default 0b0000.

* GPIO: Tweak masking of SCU function.

I don't remember why I thought this was necessary...

* HAL: Explicitly turn on timer peripheral clocks used as systicks, during init.

* SCU: Add struct to hold pin configuration.

* PAL: Add functions to address The Glitch.

https://greatscottgadgets.com/2018/02-28-we-fixed-the-glitch/

* PAL/board: New IO initialization code

Declare initial state for SCU pin config, GPIOs. Apply initial state during PAL init. Perform VAA slow turn-on to address The Glitch.

* Merge M0 and M4 to eliminate need for bootstrap firmware

During _early_init, detect if we're running on the M4 or M0.
If M4: do M4-specific core initialization, reset peripherals, speed up SPIFI clock, start M0, go to sleep.
If M0: do all the other things.

* Pins: Miscellaneous SCU configuration tweaks.

* Little code clarity improvement.

* bootstrap: Remove, not necessary.

* Clock Manager: Large re-working to support external references.

* Clock Manager: Actually store chosen clock reference

Similarly-named local was covering a member and discarding the value.

* Clock Manager: Reference type which contains source, frequency.

* Setup: Display reference source, frequency in frequency correction screen.

* LPC43xx API: Add extern "C" for use from C++.

* Use LPC43xx API for SGPIO, GPDMA, I2S initialization.

* I2S: Add BASE_AUDIO_CLK management.

* Add MOTOCON_PWM clock/reset structure.

* Serial: Fix dumb typos.

* Serial: Remove extra reference operator.

* Serial: Cut-and-paste error in structure type name.

* Move SCU structure from PAL to LPC43xx API.

It'd be nice if I gave some thought to where code should live before I commit it.

* VAA power: Move code to HackRF board file

It doesn't belong in PAL.

* MAX5 CPLD: Add SAMPLE and EXTEST methods.

* Flash image: Change packing scheme to use flash more efficiently.

Application is now a single image for both M4 bootstrap and M0.
Baseband images come immediately after application binary. No need to align to large blocks (and waste lots of flash).

* Clock Manager: Remove PLL1 power down function.

* Move and rename peripherals reset function to board module.

* Remove unused peripheral/clock management.

* Clock Manager: Extract switch to IRC into separate function.

* Clock Manager: More explicit shutdown of clocks, clock generator.

* Move initialization to board module.

* ChibiOS: Rename "application" board, add "baseband" board.

There are now two ChibiOS "boards", one which runs the application and does the hardware setup. The other board, "baseband", does very little setup.

* Clock Manager: Remove unused crystal enable/disable code.

* Clock Manager: Restore clock configuration to SPIFI bootloader state before app shutdown.

* Reset peripherals on app shutdown.

Be careful not to reset M0APP (the core we're running on) or GPIO (which is holding the hardware in a stable state).

* M4/baseband hal_lld_init: use IDIVA, which is configured earlier by M0.

This was causing problems during restart into HackRF mode. Baseband hal_lld_init changed M4 clock from IDIVA (set by M0) to PLL1, which was unceremoniously turned off during shutdown.

* Audio app: Stop audio PLL on shutdown.

* M4 HAL: Make LPC43XX_M4_CLK_SRC optional.

This was changing the BASE_M4_CLK when a baseband was run.

* LPC43xx C++ layer: Fix IDIVx constructor IDIV narrow field width.

* Application board: hide the peripherals_reset function, as it isn't useful except during hardware init.

* Consolidate hardware init code to some degree.

ClockManager is super-overloaded and murky in its purpose.
Migrate audio from IDIVC to IDIVD, to more closely resemble initial clock scheme, so it's simpler to get back to it during shutdown.

* Migrate some startup code to application board.

* Si5351: Use correct methods for reset().

update_output_enable_control() doesn't reset the enabled outputs to the reset state, unless the object is freshly initialized, which it isn't when performing firmware shutdown.
For similar reasons, use set_clock_control() instead of setting internal state and then using the update function.

* GPIO: Set SPIFI CS pin to match input buffer state coming out of bootloader.

* Change application board.c to .cpp, with required dependent changes

* Board: Clean up SCU configuration code/data.

* I2S: Add shutdown code and use it.

* LPC43xx: Consolidate a bunch of structures that had been scattered all over.

...because I'm an undisciplined coder.

* I2S: Fix ordering of branch and base clock disable.

Core was hanging, presumably because the register interface on the branch/peripheral was unresponsive after the base clock was disabled.

* Controls: Save and expose raw navigation wheel switch state

I need to do some work on debouncing and ignoring simultaneous key presses.

* Controls: Add debug view for switches state.

* Controls: Ignore all key presses until all keys are released.

This should address some mechanical quirks of the navigation wheel used on the PortaPack.

* Clock Manager: Wait for only the necessary PLL to lock.

Wasn't working on PortaPacks without a built-in clock reference, as that uses the other PLL.
TODO: Switching PLLs may be kind of pointless now...

* CMake: Pull HackRF project from GitHub and build.

* CMake: Remove commented code.

* CMake: Clone HackRF via HTTPS, not SSH.

* CMake: Extra pause for slow post-DFU firmware boot-up.

* CMake: TODO to fix SVF/XSVF file source.

* CMake: Ask HackRF hackrf_usb to make DFU binary.

* Travis-CI: Add dfu-util, now that HackRF firmware is being built for inclusion.

* Travis-CI: Update build environment to Ubuntu xenial

Previously Trusty.

* Travis-CI: Incorrectly structured my request for dfu-util package.

I'm soooo talented.

* ldscript: Mark flash, ram with correct R/W/X flags.

* ldscript: Enlarge M0 flash region to 1Mbyte, the size of the HackRF SPI flash.

* Receiver: Hide PPM adjustment if clock source is not HackRF crystal.

* Documentation: Update product photos and README.

* Documentation: Add TCXO feature to README description.

* Application: Rearrange files to match HAVOC directory structure.

* Map view in AIS (#213)

* Added GeoMapView to AISRecentEntryDetailView

* Added autoupdate in AIS map

* Revert "Map view in AIS (#213)"

This reverts commit 262c030224.

This commit will be cherry-picked onto a clean branch, then re-committed after a troublesome pull request is reverted.

* Revert "Upstream merge to make new revision of PortaPack work (#206)"

This reverts commit 920b98f7c9.

This pull request was missing some changes and was preventing firmware from functioning on older PortaPacks.

* CPLD: Pull bitstream from HackRF project.

* SGPIO: Identify pins on CPLD by their new functions. Pull down HOST_SYNC_EN.

* CPLD: Don't load HackRF CPLD bitstream into RAM.

Trying to converge CPLD implementations, so this shouldn't be necesssary. HOWEVER, it would be good to *check* the CPLD contents and provide a way to update, if necessary.

* CPLD: Tweak clock generator config to match CPLD timing changes in HackRF.

* PinConfig: Drive CPLD pins correctly.

* CMake: Use jboone/hackrf master branch, now that CPLD fixes are there.

* CMake: Fix HackRF CPLD SVF dependency.

Build would break on the first pass, but work if you restarted make.

* CMake: Fix my misuse of the HackRF CMake configuration -- was building from too deep in the directory tree

* CMake: Work-around for CMake 3.5 not supporting ExternalProject_Add SOURCE_SUBDIR.

* CMake: Choose a CMP0005 policy to quiet CMake warnings.

* Settings: Show active clock reference. Only show PPM adjustment for HackRF source.

* Setup: Format clock reference frequency in MHz, not Hz.

* Radio Settings: Change reference clock text color.

Make consistent color with other un-editable text.
TODO: This is a bit of a hack to get ui::Text objects to support custom colors, like the Label structures used elsewhere.

* Pin config: VREGMODE=1, add other pins for completeness, comment detail

* Pin setup: More useful comments.

* Pin setup: Change some defaults, only set up PortaPack pins if detected.

* Pin setup: Disable LPC pull-ups on PP CPLD data bus, as CPLD is pulling up.

* Baseband: Allow larger HackRF firmware image.

* HackRF: Remove USER_INTERFACE CMake variable.

* CPLD: Make use of HackRF CPLD tool to generate code.
2019-03-12 05:24:18 +00:00
clem-42
7f39e49404 Unable to build due to a missing LGE app declaration in CMakeLists (#220) 2019-02-06 19:24:34 +00:00
furrtek
162cb4c9fa Added LGE app, nothing to see here
Update button in signal gen now works for shape change
2019-02-06 17:34:53 +00:00
Jared Boone
e7c0fa394b PortaPack Sync, take 2 (#215)
* Power: Turn off additional peripheral clock branches.

* Update schematic with new symbol table and KiCad standard symbols.
Fix up wires.

* Schematic: Update power net labels.

* Schematic: Update footprint names to match library changes.

* Schematic: Update header vendor and part numbers.

* Schematic: Specify (arbitrary) value for PDN# net.

* Schematic: Remove fourth fiducial. Not standard practice, and was taking up valuable board space.

* Schematic: Add reference oscillator -- options for clipped sine or HCMOS output.

* Schematic: Update copyright year.

* Schematic: Remove CLKOUT to CPLD. It was a half-baked idea.

* Schematic: Add (experimental) GPS circuit.
Add note about charging circuit.
Update date and revision to match PCB.

* PCB: Update from schematic change: now revision 20180819.
Diff was extensive due to net renumbering...

* PCB: Fix GPS courtyard to accommodate crazy solder paste recommendation in integration manual.
PCB: Address DRC clearance violation between via and oscillator pad.

* PCB: Update copyright on drawing.

* Update schematic and PCB date and revision.

* gitignore: Sublime Text editor project/workspace files

* Power: Power up or power down peripheral clock at appropriate times, so firmware doesn't freeze...

* Clocking: Fix incorrect shift for CGU IDIVx_CTRL.PD field.

* LPC43xx: Add CGU IDIVx struct/union type.

* Power: Switch off unused IDIV dividers. Make note of active IDIVs and their use.

* HackRF Mode: Upgrade firmware to 2018.01.1 (API 1.02)

* MAX V CPLD: Refactor class to look more like Xilinx CoolRunner II CPLD class.

* MAX V CPLD: Add BYPASS, SAMPLE support.
Rename enter_isp -> enable, exit_isp -> disable.
Use SAMPLE at start of flash process, which somehow addresses the problem where CFM wouldn't load into SRAM (and become the active bitstream) after flashing.

* MAX V CPLD: Reverse verify data checking logic to make it a little faster.

* CPLD: After reprogramming flash, immediately clamp I/O signals, load to SRAM, and "execute" the new bitstream.

* Si5351: Refactor code, make one of the registers more type-safe.
Clock Manager: Track selected reference clock source for later use in user interface.

* Clock Manager: Add note about PPM only affecting Si5351C PLLA, which always runs from the HackRF 25MHz crystal.
It is assumed an external clock does not need adjustment, though I am open to being convinced otherwise...

* PPM UI: Show "EXT" when showing PPM adjustment and reference clock is external.

* CPLD: Add pins and logic for new PortaPack hardware feature(s).

* CPLD: Bitstream to support new hardware features.

* Clock Generator: Add a couple more setter methods for ClockControl registers.

* Clock Manager: Use shared MCU CLKIN clock control configuration constant.

* Clock Manager: Reduce MCU CLKIN driver current. 2mA should be plenty.

* Clock Manager: Remove redundant clock generator output enable.

* Bootstrap: Remove unnecessary ldscript hack to locate SPIFI mode change code in RAM.

* Bootstrap: Get CPU operating at max frequency as soon as possible.
Update SPIFI speed comment.
Make some more LPC43xx types into unions with uint32_t.

* Bootstrap: Explicitly configure IDIVB for SPIFI, despite LPC43xx bootloader setting it.

* Clock Manager: Init peripherals before CPLD reconfig. Do the clock generator setup after, so we can check presence of PortaPack reference clock with the help of the latest CPLD bitstream.

* Clock Manager: Reverse sense of conditional that determines crystal or non-crystal reference source. This is for an expected upcoming change where multiple external options can be differentiated.

* Bootstrap: Consolidate clock configuration, update SPIFI rate comment.

* Clock Manager: Use IDIVA for clock source for all peripherals, instead of PLL1. Should make switching easier going forward.
Don't use IRC as clock during initial clock manager configuration. Until we switch to GP_CLKIN, we should go flat out...

* ChibiOS M0: Change default clock speed to 204MHz, since bootstrap now maxes out clock speed before starting M0 execution.

* PortaPack IO: Expose method to set reference oscillator enable pin.

* Pin configuration: Do SPIFI pin config with other pins, in preparation for eliminating separate bootloader.

* Pin configuration: Disable input buffers on pins that are never read.

* Revert "ChibiOS M0: Change default clock speed to 204MHz, since bootstrap now maxes out clock speed before starting M0 execution."

This reverts commit c0e2bb6cc4cc656769323bdbb8ee5a16d2d5bb03.

* PCB: Change PCB stackup, Tg, clarify solder mask color, use more metric.

* PCB: Move HackRF header P9 to B.CrtYd layer.

* PCB: Change a Tg reference I missed.

* PCB: Update footprints for parts with mismatched CAD->tape rotation.
Adjust a few layer choice and line thickness bits.

* PCB: Got cold feet, switched back to rectangular pads.

* PCB: Add Eco layers to be visible and Gerber output.

* PCB: Use aux origin for plotting, for tidier coordinates.

* PCB: Output Gerber job file, because why not?

* Schematic: Correct footprints for two reference-related components.

* Schematic: Remove manfuacturer and part number for DNP component.

* Schematic: Specify resistor value, manufacturer, part number for reference oscillator series termination.

* PCB: Update netlist and footprints from schematic.

* Netlist: Updated component values, footprints.

* PCB: Nudge some components and traces to address DRC clearance violations.

* PCB: Allow KiCad to update zone timestamps (again?!).

* PCB: Generate *all* Gerber layers.

* Schematic, PCB: Update revision to 20181025.

* PCB: Adjust fab layer annotations orientation and font size.

* PCB: Hide mounting hole reference designators on silk layer.

* PCB: Shrink U1, U3 pads to get 0.2mm space between pads.

* PCB: Set pad-to-mask clearance to zero, leave up to fab. Set minimum mask web to 0.2mm for non-black options.

* PCB: Revise U1 pad shape, mask, paste, thermal drills.
Clearance is improved at corner pads.

* PCB: Tweak U3 for better thermal pad/drill/mask/paste design.

* PCB: Change solder mask color to blue.

* Schematic, PCB: Update revision to 20181029.

* PCB: Bump minimum mask web down a tiny bit because KiCad is having trouble with math.

* Update schematic

* Remove unused board files.

* Add LPC43xx functions.

* chibios: Replace code with per-peripheral structs defining clocks, interrupts, and reset bits.

* LPC43xx: Add MCPWM peripheral struct.

* clock generator: Use recommended PLL reset register value.

Datasheet recommends a value. AN619 is quiet on the topic, claims the low nibble is default 0b0000.

* GPIO: Tweak masking of SCU function.

I don't remember why I thought this was necessary...

* HAL: Explicitly turn on timer peripheral clocks used as systicks, during init.

* SCU: Add struct to hold pin configuration.

* PAL: Add functions to address The Glitch.

https://greatscottgadgets.com/2018/02-28-we-fixed-the-glitch/

* PAL/board: New IO initialization code

Declare initial state for SCU pin config, GPIOs. Apply initial state during PAL init. Perform VAA slow turn-on to address The Glitch.

* Merge M0 and M4 to eliminate need for bootstrap firmware

During _early_init, detect if we're running on the M4 or M0.
If M4: do M4-specific core initialization, reset peripherals, speed up SPIFI clock, start M0, go to sleep.
If M0: do all the other things.

* Pins: Miscellaneous SCU configuration tweaks.

* Little code clarity improvement.

* bootstrap: Remove, not necessary.

* Clock Manager: Large re-working to support external references.

* Clock Manager: Actually store chosen clock reference

Similarly-named local was covering a member and discarding the value.

* Clock Manager: Reference type which contains source, frequency.

* Setup: Display reference source, frequency in frequency correction screen.

* LPC43xx API: Add extern "C" for use from C++.

* Use LPC43xx API for SGPIO, GPDMA, I2S initialization.

* I2S: Add BASE_AUDIO_CLK management.

* Add MOTOCON_PWM clock/reset structure.

* Serial: Fix dumb typos.

* Serial: Remove extra reference operator.

* Serial: Cut-and-paste error in structure type name.

* Move SCU structure from PAL to LPC43xx API.

It'd be nice if I gave some thought to where code should live before I commit it.

* VAA power: Move code to HackRF board file

It doesn't belong in PAL.

* MAX5 CPLD: Add SAMPLE and EXTEST methods.

* Flash image: Change packing scheme to use flash more efficiently.

Application is now a single image for both M4 bootstrap and M0.
Baseband images come immediately after application binary. No need to align to large blocks (and waste lots of flash).

* Clock Manager: Remove PLL1 power down function.

* Move and rename peripherals reset function to board module.

* Remove unused peripheral/clock management.

* Clock Manager: Extract switch to IRC into separate function.

* Clock Manager: More explicit shutdown of clocks, clock generator.

* Move initialization to board module.

* ChibiOS: Rename "application" board, add "baseband" board.

There are now two ChibiOS "boards", one which runs the application and does the hardware setup. The other board, "baseband", does very little setup.

* Clock Manager: Remove unused crystal enable/disable code.

* Clock Manager: Restore clock configuration to SPIFI bootloader state before app shutdown.

* Reset peripherals on app shutdown.

Be careful not to reset M0APP (the core we're running on) or GPIO (which is holding the hardware in a stable state).

* M4/baseband hal_lld_init: use IDIVA, which is configured earlier by M0.

This was causing problems during restart into HackRF mode. Baseband hal_lld_init changed M4 clock from IDIVA (set by M0) to PLL1, which was unceremoniously turned off during shutdown.

* Audio app: Stop audio PLL on shutdown.

* M4 HAL: Make LPC43XX_M4_CLK_SRC optional.

This was changing the BASE_M4_CLK when a baseband was run.

* LPC43xx C++ layer: Fix IDIVx constructor IDIV narrow field width.

* Application board: hide the peripherals_reset function, as it isn't useful except during hardware init.

* Consolidate hardware init code to some degree.

ClockManager is super-overloaded and murky in its purpose.
Migrate audio from IDIVC to IDIVD, to more closely resemble initial clock scheme, so it's simpler to get back to it during shutdown.

* Migrate some startup code to application board.

* Si5351: Use correct methods for reset().

update_output_enable_control() doesn't reset the enabled outputs to the reset state, unless the object is freshly initialized, which it isn't when performing firmware shutdown.
For similar reasons, use set_clock_control() instead of setting internal state and then using the update function.

* GPIO: Set SPIFI CS pin to match input buffer state coming out of bootloader.

* Change application board.c to .cpp, with required dependent changes

* Board: Clean up SCU configuration code/data.

* I2S: Add shutdown code and use it.

* LPC43xx: Consolidate a bunch of structures that had been scattered all over.

...because I'm an undisciplined coder.

* I2S: Fix ordering of branch and base clock disable.

Core was hanging, presumably because the register interface on the branch/peripheral was unresponsive after the base clock was disabled.

* Controls: Save and expose raw navigation wheel switch state

I need to do some work on debouncing and ignoring simultaneous key presses.

* Controls: Add debug view for switches state.

* Controls: Ignore all key presses until all keys are released.

This should address some mechanical quirks of the navigation wheel used on the PortaPack.

* Clock Manager: Wait for only the necessary PLL to lock.

Wasn't working on PortaPacks without a built-in clock reference, as that uses the other PLL.
TODO: Switching PLLs may be kind of pointless now...

* CMake: Pull HackRF project from GitHub and build.

* CMake: Remove commented code.

* CMake: Clone HackRF via HTTPS, not SSH.

* CMake: Extra pause for slow post-DFU firmware boot-up.

* CMake: TODO to fix SVF/XSVF file source.

* CMake: Ask HackRF hackrf_usb to make DFU binary.

* Travis-CI: Add dfu-util, now that HackRF firmware is being built for inclusion.

* Travis-CI: Update build environment to Ubuntu xenial

Previously Trusty.

* Travis-CI: Incorrectly structured my request for dfu-util package.

I'm soooo talented.

* ldscript: Mark flash, ram with correct R/W/X flags.

* ldscript: Enlarge M0 flash region to 1Mbyte, the size of the HackRF SPI flash.

* Receiver: Hide PPM adjustment if clock source is not HackRF crystal.

* Documentation: Update product photos and README.

* Documentation: Add TCXO feature to README description.

* Application: Rearrange files to match HAVOC directory structure.

* Map view in AIS (#213)

* Added GeoMapView to AISRecentEntryDetailView

* Added autoupdate in AIS map

* Revert "Map view in AIS (#213)"

This reverts commit 262c030224.

This commit will be cherry-picked onto a clean branch, then re-committed after a troublesome pull request is reverted.

* Revert "Upstream merge to make new revision of PortaPack work (#206)"

This reverts commit 920b98f7c9.

This pull request was missing some changes and was preventing firmware from functioning on older PortaPacks.

* CPLD: Pull bitstream from HackRF project.

* SGPIO: Identify pins on CPLD by their new functions. Pull down HOST_SYNC_EN.

* CPLD: Don't load HackRF CPLD bitstream into RAM.

Trying to converge CPLD implementations, so this shouldn't be necesssary. HOWEVER, it would be good to *check* the CPLD contents and provide a way to update, if necessary.

* CPLD: Tweak clock generator config to match CPLD timing changes in HackRF.

* PinConfig: Drive CPLD pins correctly.

* CMake: Use jboone/hackrf master branch, now that CPLD fixes are there.

* CMake: Fix HackRF CPLD SVF dependency.

Build would break on the first pass, but work if you restarted make.

* CMake: Fix my misuse of the HackRF CMake configuration -- was building from too deep in the directory tree

* CMake: Work-around for CMake 3.5 not supporting ExternalProject_Add SOURCE_SUBDIR.

* CMake: Choose a CMP0005 policy to quiet CMake warnings.

* Settings: Show active clock reference. Only show PPM adjustment for HackRF source.

* Radio Settings: Change reference clock text color.

Make consistent color with other un-editable text.
TODO: This is a bit of a hack to get ui::Text objects to support custom colors, like the Label structures used elsewhere.
2019-02-03 18:25:11 +00:00
Joakim Karlsson
262c030224 Map view in AIS (#213)
* Added GeoMapView to AISRecentEntryDetailView

* Added autoupdate in AIS map
2019-01-14 23:38:12 +00:00
Maescool
920b98f7c9 Upstream merge to make new revision of PortaPack work (#206)
* Power: Turn off additional peripheral clock branches.

* Update schematic with new symbol table and KiCad standard symbols.
Fix up wires.

* Schematic: Update power net labels.

* Schematic: Update footprint names to match library changes.

* Schematic: Update header vendor and part numbers.

* Schematic: Specify (arbitrary) value for PDN# net.

* Schematic: Remove fourth fiducial. Not standard practice, and was taking up valuable board space.

* Schematic: Add reference oscillator -- options for clipped sine or HCMOS output.

* Schematic: Update copyright year.

* Schematic: Remove CLKOUT to CPLD. It was a half-baked idea.

* Schematic: Add (experimental) GPS circuit.
Add note about charging circuit.
Update date and revision to match PCB.

* PCB: Update from schematic change: now revision 20180819.
Diff was extensive due to net renumbering...

* PCB: Fix GPS courtyard to accommodate crazy solder paste recommendation in integration manual.
PCB: Address DRC clearance violation between via and oscillator pad.

* PCB: Update copyright on drawing.

* Update schematic and PCB date and revision.

* gitignore: Sublime Text editor project/workspace files

* Power: Power up or power down peripheral clock at appropriate times, so firmware doesn't freeze...

* Clocking: Fix incorrect shift for CGU IDIVx_CTRL.PD field.

* LPC43xx: Add CGU IDIVx struct/union type.

* Power: Switch off unused IDIV dividers. Make note of active IDIVs and their use.

* HackRF Mode: Upgrade firmware to 2018.01.1 (API 1.02)

* MAX V CPLD: Refactor class to look more like Xilinx CoolRunner II CPLD class.

* MAX V CPLD: Add BYPASS, SAMPLE support.
Rename enter_isp -> enable, exit_isp -> disable.
Use SAMPLE at start of flash process, which somehow addresses the problem where CFM wouldn't load into SRAM (and become the active bitstream) after flashing.

* MAX V CPLD: Reverse verify data checking logic to make it a little faster.

* CPLD: After reprogramming flash, immediately clamp I/O signals, load to SRAM, and "execute" the new bitstream.

* Si5351: Refactor code, make one of the registers more type-safe.
Clock Manager: Track selected reference clock source for later use in user interface.

* Clock Manager: Add note about PPM only affecting Si5351C PLLA, which always runs from the HackRF 25MHz crystal.
It is assumed an external clock does not need adjustment, though I am open to being convinced otherwise...

* PPM UI: Show "EXT" when showing PPM adjustment and reference clock is external.

* CPLD: Add pins and logic for new PortaPack hardware feature(s).

* CPLD: Bitstream to support new hardware features.

* Clock Generator: Add a couple more setter methods for ClockControl registers.

* Clock Manager: Use shared MCU CLKIN clock control configuration constant.

* Clock Manager: Reduce MCU CLKIN driver current. 2mA should be plenty.

* Clock Manager: Remove redundant clock generator output enable.

* Bootstrap: Remove unnecessary ldscript hack to locate SPIFI mode change code in RAM.

* Bootstrap: Get CPU operating at max frequency as soon as possible.
Update SPIFI speed comment.
Make some more LPC43xx types into unions with uint32_t.

* Bootstrap: Explicitly configure IDIVB for SPIFI, despite LPC43xx bootloader setting it.

* Clock Manager: Init peripherals before CPLD reconfig. Do the clock generator setup after, so we can check presence of PortaPack reference clock with the help of the latest CPLD bitstream.

* Clock Manager: Reverse sense of conditional that determines crystal or non-crystal reference source. This is for an expected upcoming change where multiple external options can be differentiated.

* Bootstrap: Consolidate clock configuration, update SPIFI rate comment.

* Clock Manager: Use IDIVA for clock source for all peripherals, instead of PLL1. Should make switching easier going forward.
Don't use IRC as clock during initial clock manager configuration. Until we switch to GP_CLKIN, we should go flat out...

* ChibiOS M0: Change default clock speed to 204MHz, since bootstrap now maxes out clock speed before starting M0 execution.

* PortaPack IO: Expose method to set reference oscillator enable pin.

* Pin configuration: Do SPIFI pin config with other pins, in preparation for eliminating separate bootloader.

* Pin configuration: Disable input buffers on pins that are never read.

* Revert "ChibiOS M0: Change default clock speed to 204MHz, since bootstrap now maxes out clock speed before starting M0 execution."

This reverts commit c0e2bb6cc4cc656769323bdbb8ee5a16d2d5bb03.

* Remove unused board files.

* Add LPC43xx functions.

* chibios: Replace code with per-peripheral structs defining clocks, interrupts, and reset bits.

* LPC43xx: Add MCPWM peripheral struct.

* clock generator: Use recommended PLL reset register value.

Datasheet recommends a value. AN619 is quiet on the topic, claims the low nibble is default 0b0000.

* GPIO: Tweak masking of SCU function.

I don't remember why I thought this was necessary...

* HAL: Explicitly turn on timer peripheral clocks used as systicks, during init.

* SCU: Add struct to hold pin configuration.

* PAL: Add functions to address The Glitch.

https://greatscottgadgets.com/2018/02-28-we-fixed-the-glitch/

* PAL/board: New IO initialization code

Declare initial state for SCU pin config, GPIOs. Apply initial state during PAL init. Perform VAA slow turn-on to address The Glitch.

* Merge M0 and M4 to eliminate need for bootstrap firmware

During _early_init, detect if we're running on the M4 or M0.
If M4: do M4-specific core initialization, reset peripherals, speed up SPIFI clock, start M0, go to sleep.
If M0: do all the other things.

* Pins: Miscellaneous SCU configuration tweaks.

* Little code clarity improvement.

* bootstrap: Remove, not necessary.

* Clock Manager: Large re-working to support external references.

* Fix merge conflicts
2019-01-11 06:56:21 +00:00
furrtek
bbb5dc3c12 Merge branch 'master' of https://github.com/furrtek/portapack-havoc 2018-12-18 16:25:43 +00:00
furrtek
1d13389b5a Bias-T now works in capture mode
Simplified soundboard app, still some work to do
Merge remote-tracking branch 'upstream/master'
2018-12-18 16:25:21 +00:00
NotPike
4d98491448 Update README.md (#197)
Spelling. :D
2018-08-22 00:57:02 +01:00
Jared Boone
8feb79c710 Constrain enum type to address warning about underlying type conversion. 2018-08-05 15:17:48 -07:00
Jared Boone
f08e80e156 Application: Fix uninitalized fmt_pcm_t field warning 2018-08-05 15:07:12 -07:00
Jared Boone
17e5f6a1d7 ChibiOS/CMSIS: Patch to address C++1z warnings about "register" keyword. 2018-08-05 15:00:45 -07:00
Jared Boone
01bad2805c Merge branch 'external_clock' 2018-08-05 14:12:12 -07:00
Jared Boone
5fc1bde6bd CMake: Switch to C++17, because it's 2018, and I'm a modern man. 2018-08-05 14:11:08 -07:00
Jared Boone
88afee26d7 Clock Manager: Detect Si5351 CLKIN present, measure frequency, and use if approximately 10MHz. 2018-08-05 14:06:57 -07:00
Jared Boone
30f2bc4149 Clock Manager: Add API to measure LPC43xx clock inputs against IRC oscillator. 2018-08-05 14:06:45 -07:00
Jared Boone
804ebd25aa PortaPack H1 case updated for four-hole design, new vendor. 2018-06-22 17:29:38 -07:00
Furrtek
d7ee7f97a4 Ext clock detect bugfix attempt 2018-06-15 03:16:24 +01:00
furrtek
a82dc19639 Merge branch 'master' of https://github.com/furrtek/portapack-havoc 2018-06-12 07:55:30 +01:00
furrtek
609235b19f Testing external clock detection and auto-switch
Simplified audio spectrum computation and transfer
ACARS RX in debug mode
Disabled ABI warnings
Updated binary
2018-06-12 07:55:12 +01:00
furrtek
dc5d6fef70 Started work on ACARS RX
Added ACARS frequencies file
Moved non-implemented apps menu items down
2018-06-10 10:15:43 +01:00
dhoetger
e978848c3a #183 disables PIL decompression bomb protection to allow large ADSB map to be sliced (#184) 2018-06-04 00:13:43 +01:00
furrtek
5c1ba9b90d Added cursor to audio spectrum view 2018-05-22 04:43:04 +01:00
furrtek
63c4a60cf7 Fixed scrolling/FFT view glitch when going back to analog audio rx 2018-05-21 20:56:04 +01:00
furrtek
0222b60b30 Updated freqman files and max entries per file 2018-05-21 19:10:39 +01:00
furrtek
b813b32593 Added an audio FFT view in Wideband FM receive
Tried speeding up fill_rectangle for clearing the waveform widget
2018-05-21 18:46:48 +01:00
furrtek
b11c3c94b6 Added tone key mix ratio in Settings -> Audio
Renamed Setup to Settings
Updated binary
2018-05-16 09:45:13 +01:00
furrtek
96828262d7 SD card files cleanup 2018-05-15 23:47:08 +01:00
furrtek
86a2790716 Removed numbers station samples 2018-05-15 23:37:26 +01:00
furrtek
b29c1d9749 Finally found what was eating all the RAM :D
Re-enabled the tone key selector in Soundboard
Soundboard now uses OutputStream, like Replay
Constexpr'd a bunch of consts which were going to BSS section
Exiting an app now goes back to main menu
Cleaned up Message array
2018-05-15 23:35:30 +01:00
NotPike
2d3a6313cc Touchtunes Update (#173)
* Update ui_touchtunes.hpp

* Update ui_touchtunes.cpp
2018-04-25 07:19:35 +01:00
furrtek
3ddc6553ac Beta scanner app
ADSB TX frame index bugfix (OOB)
2018-04-19 20:50:32 +01:00
furrtek
5636764226 Added channel centering cursor in waterfall view
Added more samplerate choices in capture
Updated binary
2018-04-18 22:44:41 +01:00
furrtek
d0ce9610b5 Added some skeletons
Renamed "Scanner" to "Search"
Modified splash bitmap
Disabled Nuoptix TX
2018-03-27 12:52:07 +01:00
furrtek
8573f760be Added basic APRS transmit
Added goertzel algo
Updated binary
2018-02-23 20:21:24 +00:00
furrtek
7fd987a2b4 Added support for multiple sample rates in IQ record
Support for any sample rate <= 500k in IQ replay
Fixed bias-t power not activating in TX
Removed RSSI pitch output option (awful code)
Udated binary
2018-02-22 07:04:19 +00:00
Jared Boone
2121d1ef5c
Merge pull request #119 from RndmNmbr/patch-1
Update ui_widget.hpp
2018-02-03 11:16:23 -08:00
Jared Boone
b3cf24a575
Merge pull request #101 from dodgymike/master
Minor syntax error in the README file
2018-02-03 11:13:58 -08:00
RndmNmbr
36e5682406
Update ui_widget.hpp
Added include of <functional> to allow for a clean build with g++ 7.2.1 20170904
2018-02-03 13:41:40 -05:00
furrtek
57c759627d Fixed mic tx not working the first time it was entered
Fixed SD card FAT wipe (buffer size too big)
Cleared some warnings from ADSB rx
Updated binary
2018-02-01 11:17:51 +00:00
furrtek
441a266dc4 Added back scanning in BHT TX
Added file creation date display in File Manager
2018-01-09 21:12:19 +00:00
furrtek
aebd1757da Replay app loads original record frequency if available
Updated binary
2018-01-08 05:32:49 +00:00
ImDroided
444bfa1578 Added some more freq files (#152)
* Added Hampton Bay fan on and off.

* Add Chicago Police citywide freqs

* Add NOAA Weather Radio Frequencies

* Add CB channels 1-20

Credit to Pyr3x for this one

* Rename sdcard/NOAAWEATHER.TXT to sdcard/FREQMAN/NOAAWEATHER.TXT

Oops

* Update NOAAWEATHER.TXT

* Add CB channels 21-40

Credit to unixpunk for this file
2018-01-08 03:58:10 +00:00
furrtek
8f9c75d62e Merge branch 'master' of https://github.com/furrtek/portapack-havoc 2018-01-08 04:27:32 +00:00
furrtek
d6afd84c66 File load path bugfix 2018-01-08 04:27:16 +00:00
furrtek
d2ea631fe7 Merge branch 'master' of https://github.com/furrtek/portapack-havoc 2018-01-08 03:48:23 +00:00
furrtek
f0c912be2e Added Bias-T toggle confirmation
Backlight setting save bugfix
Updated binary
2018-01-08 03:47:37 +00:00
Furrtek
7acd8c1aaa
Update README.md 2018-01-08 03:09:51 +00:00
furrtek
3193c6ee99 Added bias-T status icon
Merged radio settings in one screen
2018-01-07 23:13:08 +00:00
ImDroided
587ef522f3 merge (#150)
* Added Hampton Bay fan on and off.

* Add Chicago Police citywide freqs

* Add NOAA Weather Radio Frequencies
2018-01-07 22:47:57 +00:00