Jared Boone
f0fb4cb369
I2S: Change RXMODE[1:0] to idle bit rate divider.
...
No change in function, but *may* result in tiny reduction in power and noise? Not tested.
2017-08-06 11:20:51 -07:00
Jared Boone
e59e983e29
I2S: Rename configuration structs to reflect interface modes.
2017-08-06 11:17:38 -07:00
Jared Boone
49252dc1bc
LPC43xx: Add CREG6 struct definition. Add I2S CREG6 configuration.
2017-08-06 11:16:57 -07:00
Jared Boone
80d96b08cf
CPLD: Temporarily remove HackRF bitstream check UI.
...
It was poorly implemented and was confusing the hell out of people when their CPLD was showing "BAD", even though it was fine...
2017-08-05 12:02:14 -07:00
furrtek
fba5b507ad
Made a GeoPos widget for lon/lat/alt entry and display (APRS...)
...
Cleaned up the GeoMap view, can be used as input
2017-08-03 19:06:59 +01:00
furrtek
a5f0f72ea1
Split ADSB TX into tabs
...
Simplified TabView a lot
2017-07-30 14:46:42 +01:00
furrtek
89a3afcd74
Started writing TabView
...
Loopable NumberField
2017-07-30 09:39:01 +01:00
furrtek
215ac43126
Fix std::array init
2017-07-30 00:07:57 +01:00
Jared Boone
2de30b9920
Audio: use ADC right channel for microphone.
...
AK4951 produces mic data only in right channel. WM8731 places mic samples on both channels.
2017-07-26 17:38:34 -07:00
furrtek
0cbf9cd386
Added velocity/bearing ADS-B frame for tx
...
Added compass widget
Manchester encoder
2017-07-25 08:30:12 +01:00
furrtek
c2a9ed7d9b
Merge remote-tracking branch 'upstream/master'
2017-07-25 00:20:57 +01:00
furrtek
c2fc060306
Moved screenshots
2017-07-25 00:20:37 +01:00
furrtek
5a67a7080a
ADS-B TX works well enough for dump1090 and gr-air-modes
...
Hooked ADS-B RX to baseband instead of debug IQ file, not tested
2017-07-23 12:20:32 +01:00
furrtek
b57b41753f
Added map display view (GeoMapView)
...
SigGen duration bugfix
2017-07-22 19:30:20 +01:00
Jared Boone
e9895c1b11
IO: Enable input buffer on LCD_WRX.
...
Just for consistency. Other LCD interface pin states are read during interrupt.
2017-07-20 16:37:48 -07:00
Jared Boone
751ae92509
CPLD: Switch sense of LCD_RD/WR pins.
...
Should keep CPLD settled when in HackRF mode.
2017-07-20 16:33:55 -07:00
furrtek
3005403b5e
Added De Bruijn sequence generator
...
Moved POCSAG frequency list to SD card file for FreqMan
2017-07-20 16:48:59 +01:00
Laurent F4GEV
9cb00fff6c
Update pocsag_app.hpp
...
Add french poscag new frequency, specially for fire department and private networks
2017-07-19 08:45:17 +02:00
Jared Boone
ddd951f2d8
Power: Restore peripheral clocks when starting HackRF firmware.
...
HackRF firmware assumes state specified in user manual, where all(?) peripheral clocks are enabled.
2017-07-18 21:47:04 -07:00
Jared Boone
aa189a3462
Backlight: Add abstraction for support of different hardware.
2017-07-18 21:29:32 -07:00
Jared Boone
e695d496c5
portapack.hpp: Add missing #pragma once
2017-07-18 21:04:29 -07:00
Jared Boone
c74dcbb9ba
Power: Turn off unused peripheral clocks.
...
Dropped power consumption by 42mA at VBUS -- ~200mW.
2017-07-18 17:04:04 -07:00
Jared Boone
c5230387df
OS: Disable drivers for unused peripherals.
2017-07-18 15:50:00 -07:00
Jared Boone
1eb561ab45
LCD: Rename lcd_write_data_fast to lcd_write_data.
...
It's the only LCD write function!
2017-07-18 13:27:15 -07:00
Jared Boone
aa66c0b7f7
LCD: Consolidate read functions.
...
Faster function consumed by slower function, because faster function was failing during testing.
2017-07-18 13:23:16 -07:00
Jared Boone
2064689d46
IO: Remove out-of-date comment.
2017-07-18 13:17:10 -07:00
Jared Boone
030a0bcb0c
IO: Add LCD write function for C arrays.
2017-07-18 13:16:41 -07:00
Jared Boone
bb194825ae
ILI9341: Refactor sleep on/off, display on/off functions.
2017-07-18 13:13:13 -07:00
furrtek
58f113d153
"CW generator" and "Whistle" merged in "Signal generator"
...
Added wave shape selection and tone frequency auto-update
Converted color icons to B&W
2017-07-18 19:31:05 +01:00
Jared Boone
23c340abb2
MAX V: Add shift_dr() for testing.
2017-07-18 10:53:43 -07:00
Jared Boone
963579d82a
AK4951: Adjust initial microphone gain.
2017-07-18 10:53:08 -07:00
Jared Boone
0bdf8b47ea
CPLD: Remove "default" HackRF bitstream.
2017-07-18 10:46:26 -07:00
Jared Boone
2356b585d5
FatFs: Fix Makefiles to include unicode.c.
2017-07-18 10:37:29 -07:00
furrtek
93c5959df6
ADS-B frame struct, callsign decode
2017-07-18 01:07:46 +01:00
Jared Boone
62b1a82b6b
Doc: Fix incorrect comment about MCU->CPLD pin functions.
2017-07-17 16:41:02 -07:00
Jared Boone
1b9a569022
SDC: Adjust clock/data timing and output drive to match SD specs, measurements.
2017-07-17 16:38:31 -07:00
furrtek
32e8bc4c65
Merge branch 'master' of https://github.com/furrtek/portapack-havoc
2017-07-14 10:02:38 +01:00
furrtek
802b91964b
ADS-B receive app debug code
2017-07-14 10:02:21 +01:00
Furrtek
6a148c135a
Updated binary
2017-06-29 23:54:13 +02:00
furrtek
46515ebb05
Replay buffer size and samplerate adjustment
2017-06-24 18:42:41 +01:00
furrtek
33a2df9d2a
OutputStream (file M0 -> M4 radio) now works
...
Disabled numbers station for now (too buggy, low priority)
2017-06-23 08:40:22 +01:00
furrtek
c922a56b6d
High frequency load/save bugfix
...
Editing widgets hidden if freqman category is empty
Textentry now trims strings up to cursor
2017-06-23 00:13:13 +01:00
furrtek
08391bba4f
Support for frequency manager categories (as files)
...
Base class for frequency manager views
Menuview clear/add bugfix
2017-06-22 09:08:37 +01:00
furrtek
abd154b3c7
Merge remote-tracking branch 'upstream/master'
...
Base class for text entry
2017-06-21 03:25:27 +01:00
Jared Boone
bf7f5d2567
IRQ: Make handlers more independent of EventDispatcher.
...
EventDispatcher is such a hairball...
2017-06-19 16:31:54 -07:00
Jared Boone
47cc88d1e1
ILI9341: Tidy scroll types, use height().
2017-06-19 16:31:54 -07:00
Jared Boone
748e5a4f5f
Init: Boot to HackRF mode if PortaPack CPLD not found.
...
Worst case, customers can always pull off the PortaPack to get back to a working HackRF.
2017-06-13 22:16:00 -07:00
furrtek
61be221432
Frequency manager lists
...
Scanner approximately 6.3% less buggy with wide ranges
2017-06-12 03:55:36 +01:00
furrtek
e2f0a03460
Using new CPLD data (fixes spectrum mirroring)
...
Scanner bugfix for wide ranges
Added squelch parameter for NFM receiver
Adjustment to Vumeter widget rendering
2017-06-11 09:50:29 +01:00
furrtek
042d271a9f
Text entry should be more stable
...
Text entry now allows for strings greater than 28 chars
Frequency manager save with name bugfix
2017-06-11 02:53:06 +01:00
Jared Boone
e85fb47a49
Extract function that returns audio codec based on hardware revision.
2017-06-02 22:24:15 -07:00
Jared Boone
dec4e41189
CPLD: Organize CPLD code into namespaces.
...
Use type aliases to hide actual CPLD type (somewhat).
2017-06-02 21:57:13 -07:00
Jared Boone
dd0c009e6f
CPLD: Stop generating HackRF CPLD .hpp file.
2017-06-02 21:55:35 -07:00
Jared Boone
3d06941129
Move CPLD filres to common/
...
...for imminent refactoring.
2017-06-02 17:13:41 -07:00
Jared Boone
fe687b93a2
CPLD: Extract decision about which CPLD config to use.
...
...based on hardware revision.
2017-06-02 17:05:41 -07:00
Jared Boone
a3483a8394
CPLD: Introduce Config type to clean up programming interface.
...
Hide the details of how the CPLD data is stored.
2017-06-02 16:54:24 -07:00
Jared Boone
797e63a590
CPLD: Use correct bitstream for updating hardware.
...
Determine hardware version and use one of two CPLD bitstream files.
2017-05-31 22:28:07 -07:00
Jared Boone
0fd52a7483
CPLD: Move HDL project to hardware revision-specific directory.
2017-05-31 11:50:59 -07:00
Jared Boone
4332bc763e
Audio: Use correct codec based on hardware revision.
2017-05-31 11:48:03 -07:00
Jared Boone
6e5549f127
Add hardware revision detection function.
2017-05-31 11:47:13 -07:00
Jared Boone
600dcb734e
AK4951: Initial commit.
2017-05-31 11:45:54 -07:00
Jared Boone
395e3b1736
Audio: Add input namespace and functions.
2017-05-31 11:43:45 -07:00
Jared Boone
bec626e29f
WM8731: Add Codec abstraction.
2017-05-31 11:42:12 -07:00
Jared Boone
37c058354e
WM8731: Add method to detect codec is present.
...
Used to determine PortaPack hardware version.
2017-05-31 11:34:16 -07:00
Jared Boone
8f5555b052
WM8731: Store headphone volume for mute() function.
...
So when unmuted, previous volume can be restored.
2017-05-31 11:32:32 -07:00
Jared Boone
f6e1e78e8a
WM8731: Return bool from reset() and low-level write()s.
2017-05-31 11:28:00 -07:00
Jared Boone
da4bee6cc6
Audio: Introduce Codec abstraction.
...
Now that we have two hardware variants with different audio codecs.
2017-05-31 11:21:51 -07:00
Jared Boone
5da64ab069
Modify registers widget to simplify configuration.
...
Now specify number of registers and register bits, and the widget figures out the rest.
2017-05-31 11:12:56 -07:00
Jared Boone
b3ee884f16
I2S RX: Set RX SDA pin to correct SCUMUX mode.
...
It's left in GPIO mode ordinarily, because of CPLD programming earlier in boot-up.
2017-05-26 16:50:34 -07:00
Jared Boone
5cb71d787e
Audio DMA: Fix cut-and-paste error
...
rx_empy_buffer() was returning the peripheral address, not the buffer address.
2017-05-26 16:21:28 -07:00
furrtek
b3aa4bf0b9
Reorganized menus
2017-05-25 21:36:30 +01:00
furrtek
5a11377429
Merge branch 'master' of https://github.com/furrtek/portapack-havoc
2017-05-25 21:08:50 +01:00
furrtek
8e99bccd41
Started work on APRS (AX25)
2017-05-25 21:08:33 +01:00
Jared Boone
6ef8b19bf1
Move some GPDMA configuration to application processor.
2017-05-24 15:42:44 -07:00
Jared Boone
556085b3e3
I2S: Enable TX_WS output pin's input buffer.
...
This permits receipt of TX_WS as RX_WS for the receive side of the I2S peripheral, and was why I got no RX samples when testing microphone input.
2017-05-22 14:20:49 -07:00
Matt "Mookie" Thayer
36db5d63e1
Update pocsag_app.hpp
2017-05-18 23:12:00 +02:00
furrtek
a35d9ee8a9
Missing image files
2017-05-18 21:56:55 +01:00
Matt "Mookie" Thayer
35b1654128
Minor change to named preset.
...
Shortened NL KPN because it was too long and breaking the display.
2017-05-18 22:47:43 +02:00
furrtek
82cb56e9b2
Merge branch 'master' of https://github.com/furrtek/portapack-havoc
2017-05-18 11:06:18 +01:00
furrtek
38e14b1e30
Scanner: Added last locked frequencies list
...
Added back squelch to NFM receiver
Scanner: cleanup
Widgets: VU-meter cleanup
2017-05-18 11:06:11 +01:00
Matt "Mookie" Thayer
f2979af5ee
Updated found POCSAG in Netherlands to the list.
...
Updated 2 POCSAG channels in the Netherlands to the list.
2017-05-13 23:04:50 +02:00
Jared Boone
f88e27bd3f
FatFs: Apply patch ff_12c_p3.diff.
2017-05-03 12:53:52 +01:00
Jared Boone
dfc1eab4ae
FatFs: Apply patch ff_12c_p2.diff.
2017-05-03 12:52:59 +01:00
Jared Boone
fd8f5e62e1
FatFs: Apply patch ff_12c_p1.diff.
2017-05-03 12:51:24 +01:00
Jared Boone
a65fe3315c
FatFs: Update to release R0.12c.
2017-05-03 12:43:45 +01:00
Jared Boone
85712a2c5f
FatFs: Update to release R0.12b.
2017-05-03 12:35:19 +01:00
Jared Boone
dd0048db8d
Remove broken simd32_t type.
2017-05-03 09:58:07 +01:00
Jared Boone
018d8ee952
Init PortaPack IO after CPLD update.
2017-05-02 06:45:23 +01:00
Jared Boone
d6e3cc1d1b
Move CPLD updating to earlier in start-up
...
Make sure CPLD code is up-to-date before attempting to interact with PortaPack.
2017-05-02 06:44:50 +01:00
furrtek
bebec9ccf7
More ADS-B TX experimentation
...
Lots of junk added in Numbers Station regarding voice files
Removed warnings caused by unfinished ADS-B function
2017-05-01 10:42:09 +01:00
Jared Boone
19e42196db
Fn for control of audio codec reset signal.
2017-05-01 10:37:49 +01:00
Jared Boone
b12f90ef08
Adjust initial CPLD io_reg value for new CPLD code.
2017-05-01 10:34:33 +01:00
Jared Boone
17ba51d7eb
Move PortaPack IO init to earlier -- with other IO init.
...
Was causing trouble with performing audio codec reset.
2017-05-01 10:33:16 +01:00
furrtek
8c680ff893
Simplified LCR code a bit
...
Split modem into modem and serializer
Frequency string formatter
2017-04-24 18:15:57 +01:00
furrtek
90feadd9f5
POCSAG RX saves ignored address
...
Made AFSK code more generic (not tied to LCR)
Added modem presets and more options in AFSK setup
String-ized and simplified LCR UI code
Simplified AFSK baseband code, made to always work on 16bit words
2017-04-21 06:22:31 +01:00
furrtek
eff96276c3
Made back button always focusable with left key
2017-04-21 00:31:21 +01:00
furrtek
6464cfeaef
Binary update
2017-04-20 23:39:29 +01:00
furrtek
40b49e2072
POCSAG address filter now ignores alpha messages
...
Experimenting with FIFOs for replay...
2017-04-19 22:05:16 +01:00
furrtek
a053c0e234
Reverted to SIMD macros to fix FM RX (again)
2017-04-19 00:49:44 +01:00
furrtek
3a1e5b8772
Added address filter in POCSAG RX
...
Changed POCSAG log format
Console widget knows red, green and blue now
2017-04-18 21:29:55 +01:00
furrtek
555201b780
RDS Radiotext should make receiver happier (missing end char)
...
String-ized text entry
2017-04-18 18:12:32 +01:00
furrtek
62b90942ac
Merge branch 'master' of https://github.com/furrtek/portapack-havoc
2017-04-18 12:56:10 +01:00
furrtek
d59ee08f41
Whistle now works
...
Moved BW widget in txview
String-ized LCR and AFSK message generator
2017-04-18 12:55:49 +01:00
F4GEV
ec7a262a41
Update pocsag_app.cpp
2017-04-14 11:54:35 +02:00
furrtek
fbc054ca75
Coaster pager address scan
...
Merged tone setups
2017-04-11 08:42:31 +01:00
furrtek
b61869f1c0
Started adding coaster pager/EZRadioPro TX
...
BHT XY TX sequencer
2017-04-07 06:20:24 +01:00
furrtek
1e79be5555
Shameful commit. Fixed HackRF mode not working...
...
Sync'd with Sharebrained's repo, no more SIMD warnings
2017-04-07 02:00:05 +01:00
furrtek
5ce1b8fa60
File size + credits
2017-04-07 00:41:32 +01:00
Furrtek
f6b02c31b5
Commented out Play Dead screen on startup
2017-04-01 22:35:14 +01:00
furrtek
685e4c6e4b
Added more SSTV modes
...
A bit more work done on Replay (still not enabled)
2017-03-23 21:28:21 +00:00
furrtek
6a0bcb9cca
SSTV transmit beta (320x256 24bpp Scottie 2 only)
2017-03-23 04:29:58 +00:00
furrtek
5b74b83458
Bitmap preview in SSTV TX
2017-03-22 18:21:31 +00:00
furrtek
089eeeafe4
Tones bugfix, numbers station voice files search
2017-03-22 03:21:06 +00:00
furrtek
16acb9db28
Added roger beep option in mic TX
2017-03-14 08:20:13 +00:00
furrtek
37cfcd392d
Added DCS parity table and generator tool
2017-03-14 07:24:04 +00:00
furrtek
69b0ef9a40
Microphone tx is mostly working, Voice activation, PTT, CTCSS...
...
Transmit bandwidth bugfix
TX LED is now only lit when using rf amp
VU-meter widget
Added gain parameter for baseband audio TX
2017-03-13 04:09:21 +00:00
furrtek
229ec3ea75
Added microphone TX (very basic for now)
2017-03-12 07:10:51 +00:00
furrtek
2d75722b74
Added microphone TX (very basic for now)
2017-03-12 07:10:09 +00:00
furrtek
44b2fc469c
Added microphone TX (very basic for now)
2017-03-12 07:09:22 +00:00
furrtek
6ac911feb7
CTCSS bugfix, reading of title in wav files
...
Added wav file title (INFO chunk) display in soundboard UI
Added CTCSS frequency next to PL code
Increased CTCSS tone amplitude
Added Family Radio Service channels file FRS.TXT
2017-03-11 00:59:04 +00:00
furrtek
66b58ce433
Merge branch 'master' of https://github.com/furrtek/portapack-havoc
2017-03-05 15:38:04 +00:00
furrtek
446efa8fc0
Reduced audio tx FIFO refill size
...
Last received POCSAG address is auto loaded in POCSAG tx
2017-03-05 15:37:56 +00:00
Silas Cutler
eb8e3f5928
Added additional POCSAG freq.
2017-03-03 18:55:21 -05:00
furrtek
aec41cab91
Bugfix: wave file samplerate and size not being written
2017-03-03 16:15:49 +00:00
furrtek
2022fe137c
Morse TX bugfix: bad CW symbols, FM not stopping
...
Corrected fox hunt transmitter #s
Moved widgets a bit
Setting up proc_tones with 0 message length stops it
2017-03-03 08:06:11 +00:00
Jared Boone
66d66b57ab
HackRF: Update firmware to 2017.02.1
2017-02-22 10:50:46 -08:00
furrtek
0ba05fea5e
Morse special chars and tx duration indication
2017-02-15 04:27:51 +00:00
furrtek
0642c57041
Utility: CW generator
2017-02-15 03:05:38 +00:00
furrtek
58718afd50
Morse CW TX and message set button
2017-02-14 17:16:59 +00:00
furrtek
6c86ad1b72
Morse TX foxhunt codes are working
2017-02-13 23:24:42 +00:00
furrtek
4e8980e5d8
Finished jammer modes
...
Shaved off a few kBs by using the Labels widget
2017-02-13 05:35:13 +00:00
furrtek
d12cd0d8af
"Labels" widget
2017-02-12 07:23:31 +00:00
furrtek
0102a34286
Reverted WFM mode to working state
...
TXView in ADSB TX
Lockable TXView
POCSAG TX bugfix with Alphanum and Numeric only
Testing Labels widget
2017-02-12 04:05:21 +00:00
furrtek
884d0c4f58
Missing toolchain-arm-cortex-m.cmake file
2017-02-11 23:12:49 +00:00
furrtek
091ec1f8f4
Fixed hackrf.img and terminator.img not being generated
2017-02-11 23:06:01 +00:00
furrtek
3efffca1b7
Save before cleanup
2017-02-11 22:17:02 +00:00
furrtek
21de81bb85
POCSAG TX: Support for numeric only and address only messages
2017-02-08 01:19:29 +00:00
furrtek
c72b490d49
Encoders, Nuoptix DTMF and RDS transmitters now use TransmitterView
...
Bigger buttons in AlphanumView, 3 pages
Scary yellow stripes around TransmitterView
2017-02-07 22:12:20 +00:00
furrtek
fc8279aa30
POCSAG TX text and bitrate can be changed
...
Modal view message can be multiline now
2017-02-07 19:54:18 +00:00
furrtek
dc7fcbc6c3
POCSAG TX (with fixed message for testing)
2017-02-07 17:48:17 +00:00
furrtek
b430b1e427
Merge branch 'master' of https://github.com/furrtek/portapack-hackrf
2017-02-06 20:32:45 +00:00
furrtek
24abe4b427
Yet another POCSAG bugfix (multi-batch messages are not cut anymore)
...
Added BCH ECC functions for checking, error correction and encoding
2017-02-06 20:32:33 +00:00
furrtek
98f89a84bb
Improved POCSAG receiver reliability
2017-02-05 20:57:20 +00:00
Giorgio Campiotti
ca7bb0941b
Update ui_about.hpp
...
Year was wrong in "About" screen.
2017-02-05 21:36:00 +01:00
furrtek
46482a110c
Frequency manager menu refresh not working, disabled for now...
2017-02-03 16:31:43 +00:00
furrtek
3fca8be317
Frequency save and naming bugfix
2017-02-03 16:22:12 +00:00
furrtek
84be3a363c
Added categories for Frequency Manager
...
Very bad memory leak fix in MenuView
2017-02-03 15:10:27 +00:00
furrtek
f9dd3f5a96
Icons and icon tool update
2017-02-03 08:21:12 +00:00
furrtek
c352458114
Jammer manual set range 2 & 3 bugfix
...
Menu capture/replay confusion bugfix
2017-02-03 06:26:42 +00:00
furrtek
607e6c5bd4
CTCSS in soundboard. 24 jammer chs instead of 9.
...
Soundboard random mode now cares about loop option.
Started documenting UI.
2017-02-02 09:29:14 +00:00
furrtek
799e29e5e6
Last soundboard bug was actually 50% fixed...
2017-02-02 00:44:35 +00:00
furrtek
15f66eb74e
Soundboard bugfix: shouldn't crash with long file names
2017-02-01 23:31:16 +00:00
furrtek
394331ebd2
POCSAG RX now runs at 3.072MHz, like NFM audio
2017-02-01 11:40:01 +00:00
furrtek
8662ed4024
Close Call should be more accurate
...
Merged close call and wideband spectrum baseband processors
2017-02-01 08:53:26 +00:00
furrtek
064e097bc3
Symfield widget auto-inits
...
ADS-B emergency frame
2017-02-01 00:21:13 +00:00
furrtek
688a012443
Transmitter config widget
...
Frequency manager duplicate alert
Tone sets
2017-01-30 13:10:30 +00:00
furrtek
0642d633c3
Frequency manager empty file bugfix
2017-01-30 01:09:00 +00:00
furrtek
c8e71bcdee
Cleaned up jammer UI
2017-01-29 08:29:16 +00:00
furrtek
693a2533b5
Reverted to original CPLD data
2017-01-29 06:50:48 +00:00
furrtek
f0fbc356ad
Jammer bugfix: now produces all the right channels
2017-01-17 14:27:37 +00:00
furrtek
7cb38f858e
Udpdated jammer baseband code, should work again
2017-01-17 08:42:35 +00:00
furrtek
368f0f7fb0
Digital mode for waveform widget, 2.4GHZ WLAN channels in jammer
2017-01-17 07:00:42 +00:00
furrtek
b10c88e271
POCSAG bitrate selection and logging toggle
...
Small checkboxes
2017-01-16 13:36:28 +00:00
furrtek
e4abcea9a3
Added bitrate option for POCSAG baseband, PWMRSSI frequency option
...
Split SD card wiper app
Cleanup for -Weffc++
2017-01-16 08:40:17 +00:00
furrtek
5e40669cbc
Merge 'upstream/master' - At least it builds...
2017-01-16 03:45:44 +00:00
furrtek
f39954856e
Ignores
2017-01-10 19:52:52 +00:00
furrtek
12aeae3a82
Commit replay stuff before sync
2017-01-10 19:45:40 +00:00
furrtek
3ec725c172
Added SD card wiper tool
...
Frequency manager now creates FREQMAN.TXT if not found
Moved graphics files
2017-01-10 18:40:33 +00:00
furrtek
a0c248d567
Added waveform widget and a frequency field in encoders tx
2017-01-09 02:45:29 +00:00
furrtek
be3d477352
Fixed encoders TX locking up, more icons
2017-01-08 21:52:54 +00:00
Jared Boone
052fd1c407
Extract loop into static method.
...
Performance boost as compiler is no longer updating member variable every pass through the loop.
2017-01-06 16:59:57 -08:00
Jared Boone
05eb694c0a
Introduce simd32_t type.
...
Discontinue use of disagreeable __SIMD #define.
2017-01-06 16:57:36 -08:00
Jared Boone
177d49b769
GPIO: Fix for incorrect pin-funciton bit mask.
...
Caused device to not boot. Oops.
2017-01-06 14:22:27 -08:00
furrtek
1898a37c42
Merge branch 'master' of https://github.com/furrtek/portapack-hackrf
2017-01-06 02:51:24 +01:00
furrtek
9fab42eb7c
More pretty icons, BW setting change in BHT TX
2017-01-06 02:51:09 +01:00
Jared Boone
e763592adb
Compile firmware as C++14.
2017-01-05 17:15:00 -08:00
Jared Boone
87383d735c
C++14: Decommission my own make_unique.
2017-01-05 17:14:07 -08:00
Jared Boone
0d1e48ae9c
C++14: Add two-argument delete() implementations.
...
Just passing to one-argument versions.
2017-01-05 17:13:03 -08:00
Jared Boone
a22dc150bc
C++14: make some wrapper classes static.
...
Also address GCC 6.2 not allowing constexpr from reinterpret_cast<> values.
2017-01-05 17:10:00 -08:00
Jared Boone
0ea2f9650e
C++14: const all the methods!
2017-01-05 17:06:44 -08:00
Furrtek
c6bf8cfebd
Splash was stuck
2016-12-29 23:20:26 +01:00
furrtek
c0909fa298
Pretty icons
2016-12-26 20:33:38 +01:00
furrtek
a67feb01fd
Fixed Nuoptix TX, merged DTMF TX with tones TX
2016-12-26 17:51:30 +01:00
furrtek
1e34a48be9
Fixed proc_tones skipping last tone
...
Split ui_bht to bht
2016-12-26 16:15:54 +01:00
furrtek
f033782d4b
Playdead default sequence and validity check
2016-12-26 13:49:23 +01:00
furrtek
7df5987b3b
Added utilities > Frequency manager + load/save
2016-12-26 01:31:38 +01:00
furrtek
ad2a4b6743
Added make_bitmap.py tool
2016-12-24 16:55:06 +01:00
furrtek
9470028308
Fixed messup after last squashed commits
2016-12-24 16:54:44 +01:00
furrtek
6bcb7dc1b1
# This is a combination of 2 commits.
...
# The first commit's message is:
Updated RDS transmitter: flags, PI and date/time
Merging baseband audio tone generators
Merging DTMF baseband with "tones" baseband
Added stealth transmit mode
App flash section bumped to 512k
RX and TX LEDs are now used
Play dead should work again, added login option
Morse frame gen. for letters and fox hunt codes
Merged EPAR with Xylos
Made EPAR use encoders for frame gen.
Moved OOK encoders data in encoders.hpp
Simplified about screen, ui_about_demo.* files are still there
BHT city DB, keywords removed
BHT cities DB, keywords removed
Update README.md
RDS radiotext and time group generators
# This is the 2nd commit message:
Update README.md
2016-12-24 11:52:11 +01:00
furrtek
75e8a664b0
3D buttons, to make UI clearer
2016-12-23 18:31:03 +01:00
furrtek
843c465c73
RDS radiotext and time group generators
2016-12-23 18:31:02 +01:00
furrtek
28ea2179f4
Re-enabled closecall even if it's still not working well
...
RDS PSN works again but update issue (UI ?)
Moved CTCSS stuff to dedicated file
2016-12-23 18:31:02 +01:00
furrtek
1db138c27a
Wavfile class
2016-12-23 18:31:02 +01:00
furrtek
e56fa0f479
Numbers station works, very basic
...
Added utilities, whip antenna length calculator
Modal errors/abort
2016-12-23 18:31:02 +01:00
furrtek
d18b6d135d
Restoring jammer and RDS functionalities, please wait...
...
Started work on frequency manager and numbers station simulator
2016-12-23 18:31:01 +01:00
furrtek
ef0feae62b
Started work on ADS-B TX baseband processor
2016-12-23 18:31:01 +01:00
Jared Boone
01cd8c7776
GPIO: Fix PinConfig -> uint16_t type conversion signature.
2016-12-21 22:24:07 -08:00
Jared Boone
ad9a63a666
GPIO: Fix apparent dumb bit-logic bug.
...
Not due to any observable incorrect behavior, but just noticing that the code, as previously written, should not work...
2016-12-21 22:20:28 -08:00
Jared Boone
431aae333a
Move additional FR_* error values to file.hpp for public use.
2016-12-06 09:34:45 -08:00
Jared Boone
f2dd6827ea
Add Widget::parent_rect() accessor, rename member variable.
...
Some day I will settle on a convention for naming members... I think that day is near.
2016-12-06 09:28:48 -08:00
furrtek
bb6eefe2be
Started ADS-B TX UI and frame encoding
2016-11-30 07:41:55 +01:00
Jared Boone
3f94591083
Remove a lot of static_cast<>s involving UI structs.
...
Also starting to get religion on using unsigned integers only when I want their wrapping/modulus behavior.
2016-11-29 10:13:56 -08:00
Jared Boone
4c8550bb7d
Fix narrowing conversion warnings.
2016-11-28 12:09:02 -08:00
Jared Boone
227719ff1d
Fix static_cast warning.
2016-11-28 12:05:24 -08:00
Jared Boone
86d2576d3e
Fix types on touch Filter accumulator/value.
2016-11-28 12:00:56 -08:00
Jared Boone
e820bed097
Hide ui::Rect implementation.
2016-11-28 11:25:27 -08:00
Jared Boone
d15ace4676
Hide ui::Size implementation.
2016-11-28 10:55:45 -08:00
Jared Boone
aac2d31548
Hide ui::Point implementation.
2016-11-28 10:39:10 -08:00
Jared Boone
606c1cebac
Work around apparent alignment bug in G++ 5.4.1?
...
Padding struct to be sizeof() % 4 == 0, because it was crashing the baseband... I think.
2016-11-26 16:58:42 -08:00
Jared Boone
ed0d5331ad
Fix member initialization order.
2016-11-26 16:53:35 -08:00
Jared Boone
46b3d9d087
Disallow copy constructors/assignments.
...
For classes containing pointers/state that should not be copied.
2016-11-26 16:52:57 -08:00
Jared Boone
4eb0facacb
Add lots of value constructors.
2016-11-26 16:50:44 -08:00
Jared Boone
cd31ae86d7
Add single-arg constructor for vec2_s16.
2016-11-26 16:42:03 -08:00
Jared Boone
229616491c
Enable Effective C++ and uninitialized members warnings.
2016-11-26 16:28:11 -08:00
Jared Boone
193bf0b744
Add "BASEBAND" path variable for CMake.
2016-11-05 10:40:58 -07:00
Jared Boone
94528ea572
Allow overriding baseband mcuconf.h M4 clock config.
2016-11-05 10:40:05 -07:00
Jared Boone
a33476259e
Create buffer.cpp, reduce #include dependencies and impl leakage.
2016-10-24 11:16:48 -07:00
Jared Boone
5dfb53263a
Extract BufferExchange, simplify threading.
2016-10-06 13:38:56 -07:00
Jared Boone
84334ef818
Further generalize StreamOutput -> BufferExchange.
2016-10-04 22:52:12 -07:00
Jared Boone
fadbbcc581
Move buffer reset out of buffer exchange class.
2016-10-04 22:17:57 -07:00
Jared Boone
2433ea30ad
Generalize StreamOutput a bit.
2016-10-04 22:17:27 -07:00
Jared Boone
a5793b8b9d
Put Reader, Writer inside "stream" namespace.
2016-10-04 17:13:21 -07:00
Jared Boone
01320d9806
Add a Reader interface.
2016-10-04 17:04:49 -07:00
Jared Boone
f3bfd50399
Move IO functions into .cpp files.
2016-10-04 10:12:10 -07:00
Jared Boone
43c4584a32
Move WAV structs outside of writer.
2016-10-04 10:04:38 -07:00
Jared Boone
1a2fd3e127
Prepare WAV structures for extraction.
2016-10-04 09:59:47 -07:00
Jared Boone
1bdca0fd8d
Extract (some) Writer classes to separate files.
...
TODO: PNGWriter could probably reuse this stuff too, but...
2016-10-04 09:57:13 -07:00
Jared Boone
414dd41577
Allow modification of StreamBuffer (data values, size).
2016-10-04 09:15:19 -07:00
Jared Boone
b69a3abcb5
Spectrum: Templatize various window functions.
2016-10-03 12:31:40 -07:00
Jared Boone
4153995944
CPLD: Invert GCK2 to improve ADC sample timing.
2016-10-03 11:58:42 -07:00
Jared Boone
f756ac4eac
CMake: Produce linker .map files for application, basebands.
2016-10-03 11:34:59 -07:00
Jared Boone
aed58f2a3f
File: Stop copying path when iterating.
...
TODO: I bet I've made this mistake a billion other places...
2016-10-01 10:47:21 -07:00
Jared Boone
86f672af2b
File: Add misc useful API from C++17.
2016-10-01 10:44:11 -07:00
furrtek
8c70ef08f8
Fixed xx2262 remote encoder def
...
SymField now shows symbol chars
2016-09-27 03:06:14 +02:00
furrtek
8276e5e311
Added CTCSS in Soundboard
2016-09-23 23:08:54 +02:00
Jared Boone
b9e475cbf4
Silence CMakeForceCompiler deprecation warning for >=3.6.
2016-09-23 12:18:42 -07:00
furrtek
55ba0b5e06
Cleanup, random mode in DTMF TX
2016-09-23 20:17:29 +02:00
furrtek
bb29efeda6
Added Nuoptix DTMF sync transmit (Disney parades, light shows...)
...
Soundboard ignores stereo files
2016-09-23 17:34:50 +02:00
furrtek
d049553750
Removed terminator.img from ignore
2016-09-23 12:26:50 +02:00
furrtek
8c0ff7f9c0
Soundboard uses common lfsr rand()
2016-09-23 12:20:36 +02:00
Jared Boone
b87d1456a2
File: Make path a first-class object, add some methods from C++17.
2016-09-08 12:57:34 -07:00
Jared Boone
f80706cb34
File: Extract function to convert path to string.
2016-09-07 22:20:51 -07:00
Jared Boone
df0fc30fda
Rect: Comment about a bad API method.
...
In retrospect, I don't like Rect + Rect = union -- it doesn't make as much sense and isn't as readable as Rect.union(Rect).
2016-09-07 22:19:30 -07:00
Jared Boone
f722497b01
Rect: operator method to offset by a Point.
2016-09-07 22:18:11 -07:00
Jared Boone
79330015ed
File: Clean up directory_iterator construction, preserve pattern.
...
FatFs requires pattern pointer to be stable during search.
2016-09-07 20:46:45 -07:00
Jared Boone
2740761ed7
RecentEntriesX: Move non-templated bits to .cpp.
2016-09-05 16:49:44 -07:00
Jared Boone
722f9b6886
MenuItem: Misc const and constructor consistency adjustments.
...
Also moved add_items() body to .cpp file.
2016-09-05 15:30:45 -07:00
Jared Boone
9a01d59822
MenuView: Change add_items arg to initializer_list.
...
Another code size improvement, and makes maintaining lists of menu items less stupid (you don't need to change the template arg when the item count changes).
2016-09-05 15:20:50 -07:00
Jared Boone
09222f0044
Widget/View: Consolidate dirty code inside Widget.
2016-09-05 15:04:28 -07:00
Jared Boone
8a69b0523e
View::add_children: Use std::list_initializer as argument.
...
Improvement in code size -- 944 bytes.
Some day I will understand C++11 well enough to do the right thing the first time.
2016-09-05 14:53:04 -07:00
Jared Boone
298324d6e4
RecentEntries: Extract Columns model.
2016-09-05 12:34:41 -07:00
Jared Boone
61f0d97c39
RecentEntriesView: Extract header and table widget, package in to top-level View.
2016-09-05 12:09:29 -07:00
Jared Boone
50e2dfa0b9
RecentEntries: Make templated type of std::list.
2016-09-03 22:53:44 -07:00
Jared Boone
bd785d8bf4
RecentEntries: Extract more algorithms.
2016-09-03 18:26:48 -07:00
Jared Boone
c8f7863c83
RecentEntries: Expose container as base class.
...
Trying to refactor until there's nothing but the base class left.
2016-09-03 18:12:07 -07:00
Jared Boone
b596d0697c
RecentEntries: Extract range_around().
2016-09-03 17:10:08 -07:00
Jared Boone
42d98c3b45
RecentEntries: Remove Packet template arg.
2016-09-03 16:38:44 -07:00
Jared Boone
4d781df76c
RecentEntries: Don't reference Entry template arg directly.
2016-09-03 12:58:11 -07:00
Jared Boone
c6f7d7f844
RecentEntriesView: Extract duplicate focus+selection style code.
2016-09-02 22:44:40 -07:00
Jared Boone
1e0d452f57
RecentEntriesView: Generalize draw_header() implementations.
2016-09-02 22:38:05 -07:00
Jared Boone
2396d2d97a
CMake: Remove DFU --reset, which fails build if reset fails.
...
dfu-util will often complain of reset not succeeding (which is apparently fine), then halting the programming phase (which is not fine).
2016-08-31 11:23:42 -07:00
Jared Boone
5d2ad9c1aa
SGPIO: Use pin constants when changing output enables.
2016-08-30 21:33:44 -07:00
Jared Boone
00c7cdf027
CPLD: Always clock SGPIO data on external clock rising edge.
2016-08-30 21:30:03 -07:00
Jared Boone
337d5ebaea
Add PortaPack-customized HackRF CPLD bitstream.
2016-08-30 21:29:23 -07:00
Jared Boone
42a07bb10c
Remove repeated code in RF path Config.
2016-08-30 21:26:55 -07:00
Jared Boone
f0c4b0fc98
AIS: Doesn't use RRC filter -- use rect instead.
2016-08-29 20:47:37 -07:00
furrtek
808f99647e
Soundboard: Arbitrary samplerate support for wave files
...
Screenshots
2016-08-26 09:54:17 +02:00
furrtek
f7e0f36bd9
Added Soundboard
...
file.cpp: scan_root_files
proc_audiotx.cpp: bandwidth setting
ui_widget.cpp: button on_focus
2016-08-26 08:11:24 +02:00
furrtek
5de6349199
Bitrate and flags for POCSAG packets, trim bugfix
2016-08-25 16:20:19 +02:00
furrtek
04cdafe387
Bugfix: POCSAG alphanum messages not showing
...
Bugfix: Range limit for afsk config
2016-08-24 14:44:57 +02:00
Jared Boone
e2fe4b65d9
CPLD: Set DECIM1 as input to CPLD.
...
How did DECIM work before?! Now, decimate is no longer a feature, so this doesn't really matter. But tidying it up anyway.
2016-08-23 10:30:05 -07:00
furrtek
86e3b55a54
Bugfix: forgot bit reversal for POCSAG alphanumeric messages
2016-08-23 17:50:18 +02:00
furrtek
1b9465716f
HH:MM in POCSAG RX
2016-08-23 14:35:14 +02:00
furrtek
0a549c8192
Manual frequency input in POCSAG RX
...
Changed firmware file name
2016-08-23 11:27:10 +02:00
furrtek
02f0271553
Added basic POCSAG receiver
...
Added Yes/no modal screen (for future tx warnings)
2016-08-23 08:45:33 +02:00
Jared Boone
11a5aa9766
FatFs: Apply patch ff12a_p6.diff.
2016-08-21 23:03:08 -07:00
Jared Boone
60cc9b7faa
FatFs: Apply patch ff12a_p5.diff.
...
Fixed one chunk of this patch in an earlier commit.
2016-08-21 23:02:00 -07:00
Jared Boone
81517b3f4d
SD debug: Enlarge stack for long filenames, etc.
2016-08-21 22:16:08 -07:00
Jared Boone
ed791ac5bd
File: Widen size/offset types for 64-bit filesystems.
2016-08-21 22:15:19 -07:00
Jared Boone
f7bfde73b6
FatFs: Enable long file name support.
...
Lots of re-plumbing to make this work, including a bunch of Unicode stuff now in the binary. Bloat City, I'm sure.
TODO: FatFs using unsigned (uint16_t) for UTF16 representation is kinda inconvenient. Lots of reinterpret_cast<>().
2016-08-21 18:06:39 -07:00
Jared Boone
43a11ba048
Rename time files/namespace to not conflict with existing defs.
2016-08-21 17:49:06 -07:00
Jared Boone
f20647feb4
MAX2837: Expose trim/bias/calibration adjustments.
2016-08-21 11:42:05 -07:00
Jared Boone
77016b9a40
Rename CPLD "Q_INVERT" to signal to "INVERT".
...
Don't expose detail in name about how the task is accomplished.
2016-08-21 11:35:40 -07:00
Jared Boone
b0a3f680e5
CPLD: Remove decimation feature.
2016-08-21 11:31:37 -07:00
furrtek
c2fbc0c8d5
AudioTX, fixed about screen and an LCR address list bug
2016-08-17 04:17:24 +02:00
furrtek
45a754645e
Merge remote-tracking branch 'upstream/master'
...
# Conflicts:
# firmware/application/bitmap.hpp
# firmware/application/receiver_model.cpp
# firmware/application/receiver_model.hpp
# firmware/application/touch.hpp
# firmware/application/ui_setup.cpp
# firmware/baseband/proc_ais.hpp
# firmware/baseband/proc_ert.hpp
# firmware/bootstrap/CMakeLists.txt
# firmware/common/portapack_persistent_memory.cpp
# firmware/common/portapack_persistent_memory.hpp
2016-08-17 02:55:34 +02:00
Jared Boone
52c089c4df
SGPIO: Hi-Z data bus before setting direction pin.
...
Another tactic to avoid bus contention, however brief.
2016-08-13 16:46:02 -07:00
Jared Boone
62d2ae2336
SGPIO: Change bus direction more deliberately.
...
There may have been an instant where the CPLD and SGPIO were driving the bus simultaneously, when switching from TX to RX.
2016-08-13 16:42:39 -07:00
Jared Boone
2ec1bab5d5
Plumb BasebandThread to accept direction argument.
...
Default is to receive, for compatibility with existing users.
2016-08-10 10:36:03 -07:00
Jared Boone
96da55d83a
wait_for_buffer() now handles TX buffers.
...
Feels a bit awkward to read LLI src/dest to determine if RX or TX. But it works.
2016-08-10 10:34:14 -07:00
Jared Boone
c8af6dcd70
Add SMULL instruction inline function.
2016-08-10 09:53:35 -07:00
furrtek
e686c7437e
Fixed OOK clk setting
2016-08-06 12:55:39 +02:00
furrtek
38e506a108
OOK transmit is mostly working, bit durations are wrong
...
Simplified messages carrying data (uses shared_memory instead)
Added SymField widget (bitfield, symbol field...)
Added some space for baseband code
BMP palette loading bugfix
2016-08-06 08:49:45 +02:00
Jared Boone
447a7a5661
Add TXGainField user interface element.
2016-08-03 16:14:34 -07:00
Jared Boone
ef9b4051b7
Expose TX gain on ReceiverModel.
...
Obviously, ReceiverModel is an even worse name/concept than it was before.
2016-08-03 16:13:54 -07:00
Jared Boone
1e39b7ea45
Expose TX gain in radio API.
2016-08-03 16:12:22 -07:00
Jared Boone
45a1ccbc53
Correctly map TX gain from dB to register value.
2016-08-03 16:12:01 -07:00
furrtek
787f656500
Testing OOK TX baseband module
2016-08-03 08:53:50 +02:00
furrtek
1b44b22419
Wrote most of the Encoders TX app (lacks baseband module)
...
Fixed menu scroll glitch
Added set_range to NumberField widget
2016-08-03 04:53:51 +02:00
furrtek
e2218a0f32
More AFSK options, scan lists,
2016-08-02 12:44:31 +02:00
furrtek
72f3c08e9b
Added raw ASCII char field in keyboard view
2016-08-01 20:06:17 +02:00
furrtek
94b27ec45c
Scrollable menuview
2016-07-30 05:27:28 +02:00
Jared Boone
69173f5292
FatFs: My patch to fix wrong argument type warning.
2016-07-28 23:21:13 -07:00
Jared Boone
e9d97dfd0f
FatFs: Update application ffconf.h from template.
2016-07-28 23:15:10 -07:00
Jared Boone
e5810ab7c7
FatFs: Remove (deprecated?) _USE_WRITE, _USE_IOCTL guards.
2016-07-28 23:14:43 -07:00
Jared Boone
4f6254cc93
FatFs: Apply patch ff12a_p4.diff.
2016-07-28 23:14:08 -07:00
Jared Boone
aa8c8b2937
FatFs: Apply patch ff12a_p3.diff.
2016-07-28 23:13:07 -07:00
Jared Boone
897110f715
FatFs: Apply patch ff12a_p2.diff.
2016-07-28 23:12:04 -07:00
Jared Boone
3a51933882
FatFs: Apply patch ff12a_p1.diff.
2016-07-28 23:11:23 -07:00
Jared Boone
d5234633ba
FatFs: Update to R0.12a.
2016-07-28 23:06:21 -07:00
furrtek
c58039e557
Fixed LCR scan and alt format, console widget, text input autotrim
2016-07-29 04:52:51 +02:00
Jared Boone
16a6d7efe0
Touch: Adjust thresholds and parameters for new scan.
2016-07-27 21:58:35 -07:00
Jared Boone
dd2097a447
Touch: Simplify scanning.
2016-07-27 21:57:51 -07:00
Jared Boone
8a8e84d763
Remove debugging code.
2016-07-27 21:57:00 -07:00
furrtek
1d697d2201
Added PWM RSSI output for NBFM and WFM
2016-07-28 05:25:33 +02:00
Jared Boone
c424bf08f3
Touch: Migrate touch calibration to persistent memory.
2016-07-27 15:30:43 -07:00
Jared Boone
aa1b8f63fc
Remove errant debug #define.
2016-07-27 15:12:08 -07:00
furrtek
1beac3bdbd
Added repeat setting for AFSK TX, fixed LCR scan, cleaned up LCR
...
Added max setting for progressbars, default = 100
2016-07-28 00:08:05 +02:00
Jared Boone
f85d83475c
ReceiverModel: Clean up Mode enum.
2016-07-27 14:57:50 -07:00
Jared Boone
f05d917a7c
ReceiverModel: Use Mode instead of integer.
2016-07-27 14:51:37 -07:00
Jared Boone
371c6e0906
ReceiverModel: Eliminate now-redundant BasebandConfiguration.
2016-07-27 14:42:46 -07:00
Jared Boone
b60e88ef68
ReceiverModel: More method renaming.
...
update_baseband_configuration() -> update_sampling_rate().
2016-07-27 14:41:36 -07:00
Jared Boone
5a05a758a1
ReceiverModel: Use accessor method.
2016-07-27 14:40:30 -07:00
Jared Boone
44a1b7d9d7
ReceiverModel: Method renaming.
...
update_modulation_configuration() -> update_modulation().
2016-07-27 14:39:49 -07:00
Jared Boone
82f6e7c306
Change default frequency when NVRAM is initialized.
2016-07-27 14:17:57 -07:00
Jared Boone
24fa97439d
Touch: Add touch configuration UI.
2016-07-27 14:15:21 -07:00
Jared Boone
cd9b76ef78
Touch: Average/threshold tweaks.
2016-07-27 14:08:24 -07:00
Jared Boone
7492d50f0b
Touch: Use calibration matrix.
2016-07-27 14:08:02 -07:00
Jared Boone
e813db16fd
Touch: Missing #include.
2016-07-27 14:04:04 -07:00
Jared Boone
5e5417b456
Touch: Default and active calibration API of sorts.
2016-07-27 14:03:06 -07:00
Jared Boone
c022a72ef4
Touch: Add Calibration class.
...
Matrix transforms coordinates from digitizer to display.
2016-07-27 14:01:20 -07:00
furrtek
e958b4bd7d
Fixed LCR transmit and AFSK baseband module
2016-07-27 21:26:03 +02:00
Jared Boone
8d330784b2
CFlags: Add "-g" compiler option for debug symbols.
2016-07-27 11:46:09 -07:00
Jared Boone
9500da4b1b
Touch: Fix small loss of precision calculating X/Y positions.
2016-07-27 11:14:11 -07:00
Jared Boone
f1a3201940
Touch: Add bitmaps for calibration UI.
2016-07-27 11:13:07 -07:00
Jared Boone
6c2eb37248
Bitmap: Add note about how data is structured.
2016-07-26 21:29:59 -07:00
furrtek
79f2134d91
Cleaned up Xylos TX, J/N works again
2016-07-27 05:54:55 +02:00
furrtek
739956b42b
Sync with Sharebrained's fw, only Xylos TX works for now
2016-07-27 03:03:40 +02:00
Jared Boone
d0fd56bc78
Touch: Expose metrics calculation struct/function.
2016-07-26 15:13:07 -07:00
Jared Boone
20bcbf511e
Move thread_base.hpp from baseband/ to common/.
...
I want to use it with M0 code as well.
2016-07-26 10:22:10 -07:00
Jared Boone
729ab9bb8e
TPMS: Increase channel sampling rate, improve hit rate.
2016-07-25 16:13:14 -07:00
Jared Boone
3759e142d8
ERT: Add RSSI to app UI.
2016-07-25 16:12:32 -07:00
Jared Boone
508ce89271
ERT: Add RSSI reporter to processor.
2016-07-25 16:12:13 -07:00
Jared Boone
5e362534c3
Transponder apps: Use gains from receiver model.
2016-07-25 16:07:22 -07:00
Jared Boone
c573f3b57d
ERT: Fix initial focus.
2016-07-25 16:06:26 -07:00
Jared Boone
00f542e96b
ERT: Add gain controls.
2016-07-25 16:06:09 -07:00
Jared Boone
aaa0e389b9
AIS: Add gain controls, RSSI and channel indications.
2016-07-25 15:46:37 -07:00
Jared Boone
512539fd8c
AIS: Add RSSI reporting to processor.
2016-07-25 15:45:27 -07:00
Jared Boone
4eb3f044a0
TPMS: Close row between controls and table header.
2016-07-25 15:29:52 -07:00
furrtek
fdfa7c9776
Merge remote-tracking branch 'upstream/master'
...
Conflicts:
firmware/Makefile
firmware/application/Makefile
firmware/application/event_m0.cpp
firmware/application/ui_setup.cpp
firmware/application/ui_setup.hpp
firmware/baseband/baseband_thread.cpp
firmware/baseband/baseband_thread.hpp
firmware/bootstrap/CMakeLists.txt
firmware/common/message.hpp
firmware/common/portapack_shared_memory.hpp
hardware/.gitignore
2016-07-25 16:35:42 +02:00
furrtek
966a758a0b
Added frequency manager skeleton, LCR alt encoding, GPS jammer
2016-07-25 16:21:27 +02:00
Jared Boone
fe1a6c09bb
Clean up baseband processors to each have a main().
2016-07-24 21:42:11 -07:00
Jared Boone
c8ffea0098
baseband: Move all init code into baseband.cpp.
2016-07-24 21:34:38 -07:00
Jared Boone
ea143bd3fc
Move baseband init/shutdown code to before/after main(), not inside.
2016-07-24 21:26:00 -07:00
Jared Boone
ffa797b926
File: Remove puts(), add write_line(), cascade changes in interface.
2016-07-24 20:39:21 -07:00
Jared Boone
c2d971d59e
WAVFileWriter: Error handling while updating header.
2016-07-24 19:14:48 -07:00
Jared Boone
ff17f8f293
File: Do not use f_error() in puts(), it doesn't return the reason for failure.
...
TODO: Improve puts() behavior to return a more specific error than FR_EOF.
2016-07-24 19:13:39 -07:00
Jared Boone
d556ef38b4
File: Make incomplete write()s return FR_DISK_FULL.
2016-07-24 19:12:37 -07:00
Jared Boone
931853a55f
Make File::Result::value() const.
2016-07-24 19:12:09 -07:00
Jared Boone
8b02e40602
Move touch ADC data collection to M0.
...
...so it continues when M4 is shut down.
It's not as pretty as using DMA, but it's far simpler, even if it involves letting the ADC run continuously and taking the last samples even if not synchronizing to the phase of the sampling of the channels.
2016-07-24 15:31:53 -07:00
Jared Boone
b3f4ea8978
Clean up SharedMemory placement new.
2016-07-24 15:27:05 -07:00
Jared Boone
49d6cda731
Move BasebandConfiguration to receiver_model.hpp.
...
That's the only place it's being used now -- it's no longer moving between cores.
2016-07-19 17:11:32 -07:00
Jared Boone
74b5571e8b
Remove baseband::start()/stop() and related message.
2016-07-19 17:06:22 -07:00
Jared Boone
3c46abdb24
Remove redundant #include.
2016-07-19 14:25:56 -07:00
Jared Boone
ff9c911a93
Optional code to disable baseband DMA synchronization.
2016-07-19 11:02:30 -07:00
Jared Boone
2993f7be1d
SDIO: Commit optional code to run at 50MHz.
2016-07-19 11:00:31 -07:00
Jared Boone
6f65cdf41e
Add frequency step control to capture app.
...
Redistribute other controls, remove empty row that had been reserved for options views.
2016-07-19 10:48:45 -07:00
Jared Boone
a98ada0cb7
Extract FrequencyStepView from FrequencyOptionsView.
...
...for use in capture app.
2016-07-19 10:47:15 -07:00
Jared Boone
77291b4e31
On PortaPack shutdown, init HackRF CPLD to EEPROM bitstream.
2016-07-18 11:32:14 -07:00
Jared Boone
4b7fa9f411
CPLD: Add XC2C64A method to init from EEPROM contents.
2016-07-18 11:31:21 -07:00
Jared Boone
c0b9761fe5
Move CPLD management into PortaPack::init().
2016-07-18 11:30:45 -07:00
Jared Boone
5390c45e04
Fix Python 2 vs 3 breakage relating to hex().
...
In Python 2, hex() of large ints has a "L" on the end.
2016-07-17 16:16:13 -07:00
Jared Boone
3f3fe3bb67
JTAG: Report if HackRF CPLD bitstream matches released version.
...
TODO: Could be better reporting (CRC?), and could not pause while checking CPLD EEPROM, and could offer a means to program the bitstream if it doesn't match...
2016-07-17 15:56:24 -07:00
Jared Boone
204408d288
JTAG: Load HackRF CPLD bitstream into SRAM from firmware image.
...
No further concerns about the HackRF CPLD having an ancient bitstream on it! At least in PortaPack mode...
2016-07-17 15:54:02 -07:00
Jared Boone
c8b1a8fbf6
JTAG: Add functions to check EEPROM, load SRAM of HackRF CPLD.
2016-07-17 15:52:58 -07:00
Jared Boone
1d58f05163
JTAG: Auto-generate HackRF CPLD data from SVF.
2016-07-17 15:50:36 -07:00
Jared Boone
cd3a91b3af
JTAG: HackRF CPLD SVF file for embedding in firmware.
2016-07-17 15:48:02 -07:00
Jared Boone
51c114405b
JTAG: Tool that generates C++ files from XC2C64A SVF data.
2016-07-17 15:46:12 -07:00
Jared Boone
4cc356f325
JTAG: Code to manage HackRF CPLD interactions.
2016-07-17 15:45:00 -07:00
Jared Boone
71c7f543c5
JTAG: Add TAP state management.
...
Not all that happy with the implementation, but it's doing the job for now.
2016-07-17 15:44:30 -07:00
Jared Boone
c0f4fbe32d
JTAG: Add GPIO definitions for HackRF CPLD.
2016-07-16 14:06:58 -07:00
Jared Boone
22143c9543
JTAG: Remove unused methods.
2016-07-13 11:02:13 -07:00
Jared Boone
18fe30136e
JTAG: Move Target interface to separate header.
2016-07-11 09:39:02 -07:00
Jared Boone
6917ffe1e3
JTAG: Clean up definition of Target interface.
2016-07-11 09:16:47 -07:00
Jared Boone
ad4a68f90a
CMake: Generate portapack_cpld_data.cpp from SVF via tool.
2016-07-05 12:45:31 -07:00
Jared Boone
7bcde54050
Tool for generating CPLD bitstreams in C++ arrays, from SVF file.
2016-07-05 12:33:15 -07:00
Jared Boone
740edc4d49
Remove PortaPack CPLD checksum display.
...
No point in calculating or showing, since full compare against desired bits is done at every startup -- way better than a CRC, and if it fails tries to program. If programming fails, the PortaPack panics and LED flashes.
2016-07-05 12:08:56 -07:00
Jared Boone
3ed1d9e24a
CPLD: Method to calculate bitstream CRC32.
2016-07-05 12:06:51 -07:00
Jared Boone
df825807d6
CRC: Rearrange public methods to reduce user error.
...
If you can access process_bits() without considering RevIn value, you will likely not get the CRC value you're expecting! Put RevIn check where it belongs, in process_bits().
2016-07-05 11:57:57 -07:00
Jared Boone
42190b9587
CMake: Fix ldscript dependencies.
2016-07-03 18:48:39 -07:00
Jared Boone
0899c48735
Remove linker map generation, other unnecessary(?) flags.
2016-07-03 18:33:36 -07:00
Jared Boone
b6fe392512
CMake: Improve dependencies, how output files are managed/cleaned.
...
I almost think I understand CMake, now. Almost.
2016-07-03 18:32:50 -07:00
Jared Boone
45ca3cf7e6
CMake: reduce intermediate targets, add script dependencies.
2016-07-03 11:32:21 -07:00
Jared Boone
53434f3789
Fix Python2 string type error.
2016-07-02 18:15:39 -07:00
Jared Boone
c52f5fa26c
Expose static EventDispatcher to stop main loop.
...
Used to fix reboot into HackRF firmware.
2016-07-02 16:38:01 -07:00
Jared Boone
57293bc5eb
Clear application message queue after baseband is shut down.
2016-07-02 16:19:41 -07:00
Jared Boone
30efa53956
Clear M4->M0 interrupt before M4 image is loaded.
...
...out of an abundance of caution.
2016-07-02 16:15:43 -07:00
Jared Boone
34e45412d1
Dumb baseband-running state tracking to ease use of baseband API.
2016-07-02 16:12:36 -07:00
Jared Boone
b2d5e47308
Clear baseband message at end of shutdown().
...
Allow baseband to shut down completely before shutdown message is acknowledged.
2016-07-02 16:02:50 -07:00
Jared Boone
dbd0c17c2f
Clear baseband message for non-shutdown messages.
2016-07-02 16:02:03 -07:00
Jared Boone
eac4cf678a
Capture M4 chDbgPanic msg, show in application.
2016-07-02 15:33:03 -07:00
Jared Boone
97ba19af24
Change M4 loader to use image tags.
...
Also finish moving HackRF binary to tagged image region.
2016-07-01 10:37:22 -07:00
Jared Boone
0e62876578
Add types for tagged data chunks in SPI flash.
2016-07-01 10:32:52 -07:00
Jared Boone
f683980052
Generate and append terminator chunk to basebands image.
2016-06-30 19:37:32 -07:00
Jared Boone
c3d81f1496
Add HackRF factory firmware to basebands image.
2016-06-30 19:37:05 -07:00
Jared Boone
61f954dbeb
Tweak make_image_chunk to produce empty chunk when argc == 2.
2016-06-30 19:36:23 -07:00
Jared Boone
184eb9eb0d
Utility to strip HackRF firmware DFU header.
2016-06-30 19:35:51 -07:00
Jared Boone
01833ccb83
Write all baseband binaries into tagged image file.
2016-06-30 16:45:41 -07:00
Jared Boone
f4c897946b
Add top-level CMake file.
2016-06-30 15:59:36 -07:00
Jared Boone
97760a2f9d
Remove GNU Make files, now using CMake to build firmware.
2016-06-30 12:04:10 -07:00
Jared Boone
cf5ac441ae
Add CMake firmware build system.
2016-06-30 12:02:43 -07:00
Jared Boone
500a651bcf
Give Processors a run() function.
...
So main() can call it, start a Processor linked in to the baseband binary.
2016-06-30 11:53:58 -07:00
Jared Boone
1a5f3a4422
Give new Processor to EventDispatcher.
2016-06-25 11:14:28 -07:00
Jared Boone
525e72ac86
Move Baseband/RSSI threads into Processors.
2016-06-25 11:12:22 -07:00
Jared Boone
74c8429f75
Take processor as argument to BasebandThread.
...
Remove lots of dependency on specific processors.
Reduce state by removing processor switching from BasebandThread.
2016-06-25 10:57:16 -07:00
Jared Boone
bb32ef5321
Bracket BasebandThread loop with enable/disable code.
2016-06-25 10:53:16 -07:00
Jared Boone
9188bb9ee9
Remove thread pointer checking.
2016-06-24 15:46:53 -07:00
Jared Boone
f8a473d56b
Change baseband, RSSI threads to be more RAII.
2016-06-24 15:34:49 -07:00
Jared Boone
2b7e763619
Don't check EventDispatcher::thread_event_loop before using.
...
If static methods are getting called, variable is already set.
2016-06-24 15:27:23 -07:00
Jared Boone
9444d21c12
Remove baseband stats tracking code.
...
It was half-baked, and is getting in the way of a major refactoring.
2016-06-24 15:24:26 -07:00
Jared Boone
d41c6ee36a
Simplify app->baseband message handling.
...
No need for a FIFO when all messages are intended to be synchronous.
2016-06-24 14:16:45 -07:00
Jared Boone
61325e4696
Enable M4 interrupt from M0 only when expected.
2016-06-24 13:44:40 -07:00
Jared Boone
e263420ea3
Enable M4 interrupt on M0 core only when M4 image is running.
2016-06-24 11:32:24 -07:00
Jared Boone
c7497577a0
Make all app->baseband messages synchronous.
...
No idea why they shouldn't be...
2016-06-24 11:31:41 -07:00
Jared Boone
303bfeaafc
Run baseband image per application.
...
First step toward having separate baseband images per app or function.
2016-06-24 11:30:54 -07:00
Jared Boone
ac0bdc35a6
Set TPMS app initial focus.
2016-06-23 22:11:47 -07:00
Jared Boone
fead46cc46
Fix state management in Capture mode.
...
Don't alter ReceiverModel modulation/mode when capturing.
2016-06-23 12:03:47 -07:00
Jared Boone
1010e6a234
Remove unused DMA Handler types.
2016-06-22 11:22:28 -07:00
Jared Boone
3cdce88e5d
TPMS: Allow band selection: 315 or 433.92 (~434) MHz.
2016-06-21 15:36:57 -07:00
Jared Boone
b34512e3d6
Eliminate a buffer_t copy/duplication.
2016-06-21 15:23:51 -07:00
Jared Boone
003ce4990d
Move CaptureThread::static_fn into .cpp.
2016-06-21 12:15:57 -07:00
Jared Boone
264c19b312
Rename CaptureThread message, callback method, handle success.
2016-06-21 12:05:55 -07:00
Jared Boone
81d4e59aeb
Add CaptureThread success_callback.
2016-06-21 11:53:07 -07:00
Jared Boone
4ffb05212e
Pass error_callback by value.
2016-06-21 11:52:05 -07:00
Jared Boone
0e33d7e5d0
Refresh UIRecordVide status display when appropriate.
2016-06-21 11:35:41 -07:00
Jared Boone
44fb66b4f9
Rename UIRecordView::on_tick_second() -> update_status_display().
2016-06-21 11:35:15 -07:00
Jared Boone
19e5e111a9
Move UIRecordView::set_sampling_rate to .cpp.
2016-06-21 11:33:23 -07:00
Jared Boone
59aa99c8ff
Whoops, use events_flag(), not events_flag_isr().
2016-06-21 11:19:22 -07:00
Jared Boone
320d979924
Simplify CaptureThread error callback functions.
2016-06-21 11:13:58 -07:00
Jared Boone
cfaa44b02a
Send CaptureThread error into app-local message queue.
2016-06-21 11:04:10 -07:00
Jared Boone
76c5fe96af
Use app-local queue for messages coming from application.
...
Messages are now deferred until application thread call stack unwinds, events are checked.
2016-06-21 11:00:42 -07:00
Jared Boone
dbe735233a
Add app-local MessageQueue.
2016-06-21 10:57:44 -07:00
Jared Boone
7023616808
Move MessageQueue locations in SharedMemory structure.
2016-06-21 10:56:00 -07:00
Jared Boone
9f95eb90a3
Shrink baseband queue size, 2^12 -> 2^11.
2016-06-21 10:55:24 -07:00
Jared Boone
c990963298
Expose filesystem_error code.
2016-06-21 10:54:13 -07:00
Jared Boone
420adea180
Move capture start/stop into baseband API.
...
Hide more calls to baseband/shared memory.
2016-06-20 10:52:59 -07:00
Jared Boone
6bd191349a
Hide MessageHandlerMap.
...
Definitely didn't belong in message.hpp, saw no reason to expose it outside translation unit (.cpp file).
2016-06-19 22:56:06 -07:00
Jared Boone
f731366248
Hide some M0 EventDispatcher event masks.
2016-06-19 11:41:38 -07:00
Jared Boone
dbc2a5c9ea
Hide CaptureThread event mask, only used internally.
2016-06-19 11:20:45 -07:00
Jared Boone
0da48b099c
Add RF amp field to TPMS, capture modes.
2016-06-06 10:34:39 -07:00
Jared Boone
9190fe7e4f
Move common code to LNA/VGA field widgets.
2016-06-06 10:27:33 -07:00
Jared Boone
5ee035fbb3
Move RF amp control code into new class.
2016-06-06 10:13:36 -07:00
Jared Boone
a0e7fdf90b
TPMS: Add gain controls.
2016-06-06 09:50:48 -07:00
Jared Boone
a475daeeea
TPMS: Validate checksum for OOK 8k192 Schrader.
2016-06-02 23:09:55 -07:00
Jared Boone
9628815da7
TPMS: Validate checksum for the OOK 8k4 Schrader variant.
2016-06-02 22:22:22 -07:00
Jared Boone
4734790518
Rework phase detector.
...
Simplify calculation of gate masks.
Use entire symbol period to compute symbol value.
Correct error sign based on symbol value.
2016-06-01 15:22:21 -07:00
Jared Boone
36eefa46e7
Improve OOK phase advance algorithm.
...
Now independent of samples/symbol, adjusts up to 1/8 of a cycle per symbol.
2016-06-01 15:20:23 -07:00
Jared Boone
57767004a2
TPMS: Comments, more descriptive declarations.
2016-05-30 11:28:22 -07:00
Jared Boone
a52d0fbd81
Rename format_manchester/ManchesterFormatted to "[sS]ymbols".
2016-05-30 11:24:59 -07:00
Jared Boone
3d22222689
Extract DecodedSymbol from ManchesterDecoder.
2016-05-30 11:23:13 -07:00
furrtek
e15f659a6a
RDS radiotext transmit (group 2A)
...
Keyboard/Unistroke text input method selection
2016-05-29 12:06:47 +02:00
furrtek
ceced96673
Started fixing RDS and adding more group types
2016-05-28 01:59:13 +02:00
Jared Boone
05b55f2696
TPMS: Extract packet readers.
2016-05-27 13:41:56 -07:00
furrtek
9c3e3bddad
LCR scanner and bugfixes, keyboard bugfixes
2016-05-27 09:26:43 +02:00
furrtek
6a0816ba56
Added carrier wake up in Xylos TX and cute icons
2016-05-27 06:48:04 +02:00
Jared Boone
e7aaf0e8cf
Format TPMS signal type details in log file.
2016-05-25 18:03:43 -07:00
Jared Boone
04c472e802
Push SignalType inside tpms::Packet.
2016-05-25 17:58:32 -07:00
Jared Boone
83e4aec49c
Hack to paint over last options view when none should be visible.
2016-05-25 11:39:03 -07:00
Jared Boone
6a294e7d0e
Shameful hack to hide RecordView when sampling_rate == 0.
...
Switch visibility of child widgets -- UI fields/controls vs. a black rectangle. TODO: Fix painting and state management, which right now is just terrible.
2016-05-25 11:33:23 -07:00
Jared Boone
ff57b3c8cb
Add Color-only constructor to ui::Rectangle widget.
2016-05-25 11:32:06 -07:00
Jared Boone
38b374506e
More TPMS variable/enum renaming.
2016-05-23 18:02:25 -07:00
Jared Boone
249e6ab21e
TPMS: Improve descriptiveness of pipeline component names.
2016-05-23 11:22:09 -07:00
Jared Boone
a4ddf786d4
TPMS: Move only FSK slicer and payload handler into .hpp.
2016-05-23 11:12:06 -07:00
Jared Boone
05df04df7e
TPMS: Quick implementation of "flags" column.
...
For now, shows only for Schrader OOK packets: top (left) nibble is function code, bottom nibble has two-bit checksum.
2016-05-17 14:23:03 -07:00
furrtek
7a90eab407
3MHz-wide fast close call works :) >3MHz doesn't work anymore :(
2016-05-17 20:27:51 +02:00
Jared Boone
40859444fe
Update TPMS field handling for Schrader devices.
...
Thanks to mossmann for discovering these details.
2016-05-17 11:27:19 -07:00
Jared Boone
d81d879aac
Shrink understood TPMS packet payload sizes to minimum required.
2016-05-17 11:26:17 -07:00
Jared Boone
9e3ac94187
A bit more TPMS member variable renaming.
2016-05-17 11:24:33 -07:00
Jared Boone
ad554b28b5
Rename TPMS clock recovery, packet builders for accuracy.
2016-05-17 11:11:30 -07:00
Jared Boone
65d2f263f2
Center modal view message.
2016-05-17 11:06:37 -07:00
Jared Boone
ac49726707
Rename display_error() -> display_modal(), add title argument.
2016-05-17 10:15:34 -07:00
Jared Boone
6a3cd4c144
Centralize handling of modal error display.
2016-05-17 09:33:16 -07:00
Jared Boone
682a1706a3
Improve File error handling. Massive effects...
...
API is somewhat stolen from Rust std::fs::File. Static factories didn't work out so well, though. Move semantics made my head explode.
TODO: Still a lot of places where errors aren't handled, but it's an improvement...
2016-05-16 14:01:44 -07:00
furrtek
e959d9a8ec
More messagepack
2016-05-16 12:02:45 +02:00
furrtek
61fdb57b8f
Testing Messagepack for saving/loading stuff from SD card
2016-05-15 02:35:08 +02:00
Jared Boone
d905c446bf
Fix integer width oops calculating disk space().
2016-05-13 18:10:23 -07:00
furrtek
7267de234d
Added EPAR transmit (slow FSK), bit bug for now
2016-05-13 09:34:15 +02:00
Jared Boone
ff5e20a7a4
Refactor capture file writer classes -- lots of common code.
2016-05-12 22:31:56 -07:00
Jared Boone
537296b8c3
Stop capture on error.
2016-05-12 22:03:25 -07:00
Jared Boone
8de12ff570
Display modal error when RecordView experiences an error.
2016-05-12 22:00:40 -07:00
Jared Boone
9dc12fca3c
Check for filesystem errors in RecordView.
2016-05-12 21:59:46 -07:00
Jared Boone
92d75fa46d
Very crude ModalMessageView.
...
Initially for displaying filesystem errors.
2016-05-12 21:58:54 -07:00
Jared Boone
ebf0e765ce
Expose Writer errors through CaptureThread.
2016-05-12 21:58:15 -07:00
Jared Boone
87505f833b
Expose filesystem errors on Writer.
2016-05-12 21:57:38 -07:00
Jared Boone
8655b6d915
Adapt filesystem_error to new File error handling, expose on File.
2016-05-12 21:55:39 -07:00
Jared Boone
1df505331a
Handle File errors beyond FatFs.
2016-05-12 21:55:01 -07:00
Jared Boone
b21758781c
Preserve File error state once error occurs.
2016-05-12 21:54:13 -07:00
Jared Boone
0f1ae96ba4
Move File definition below std::filesystem.
2016-05-12 21:44:37 -07:00
Jared Boone
4567db2fdb
Add std::filesystem::filesystem_error object.
...
Not a standards-compliant implementation, but has the same vague shape, so should be easier to port later(?).
2016-05-12 18:19:28 -07:00
furrtek
9149508c83
Improved close call precision
2016-05-13 01:18:04 +02:00
Jared Boone
479a96fc22
Move Painter into EventDispatcher.
2016-05-12 15:52:18 -07:00
Jared Boone
d64344a84f
Un-template MessageHandlerRegistration, move code to .cpp.
2016-05-12 15:24:08 -07:00
Jared Boone
7d4dd03418
Wrap message handler registrations in class to subscribe/unsubscribe automatically.
2016-05-11 22:53:09 -07:00
furrtek
7d193c3445
Close call tuning fix, more UI elements
2016-05-11 23:57:22 +02:00
Jared Boone
e298e1ec5a
Fix SD capture remaining time formatting -- zero pad minutes.
2016-05-11 12:34:09 -07:00
Jared Boone
46d4c919fb
Show SD card capture time remaining even when not capturing.
2016-05-11 12:07:58 -07:00
Jared Boone
7fd508dfbe
Format remaining time on SD card as "HHH:MM:SS".
2016-05-11 12:02:39 -07:00
Jared Boone
7d3e697ea8
Rename SD record variables: "free"/"recorded" -> "available"
2016-05-11 11:50:40 -07:00
Jared Boone
b2322370a9
Display remaining capture time on SD card.
2016-05-11 11:22:57 -07:00
Jared Boone
f157c13442
Implement std::filesystem::space().
2016-05-11 10:58:57 -07:00
furrtek
fb21c1332e
Started close call dev
2016-05-11 12:45:03 +02:00
furrtek
b4a113be59
Handwriting fixes
2016-05-11 01:03:42 +02:00
Jared Boone
c48a88539a
Check capture FIFO before waking M0 capture thread.
2016-05-10 14:39:24 -07:00
Jared Boone
b82eff51dd
Refactor of capture buffer management between cores.
...
Instead of copying data into and out of FIFO, passing buffer pointers between cores that are sized to match preferred/ideal SD card write size.
2016-05-10 14:12:37 -07:00
Jared Boone
85a6ecd5dc
Missing "using namespace".
2016-05-10 11:02:42 -07:00
Jared Boone
4c57c1205f
SD debug display more informative card type.
2016-05-09 22:49:26 -07:00
Jared Boone
91ae692f90
SD debug display CSD value.
2016-05-09 22:48:33 -07:00
Jared Boone
cc9c5acc3c
Remove SD card debug "detected" field.
2016-05-09 22:42:54 -07:00
furrtek
a42f5beb9b
Handwriting recognition
2016-05-10 07:20:24 +02:00
Jared Boone
51b680c3bd
Implement FatFs disk_ioctl MMC_GET_{TYPE,CSD}.
2016-05-09 21:55:57 -07:00
Jared Boone
95581f8c27
FatFs disk_ioctl(GET_BLOCK_SIZE) unimplemented, return correct value.
2016-05-09 21:55:06 -07:00
Jared Boone
03c6c80332
Factor out some SD card info formatting.
2016-05-09 21:53:01 -07:00
furrtek
4511090eae
Unistroke in dirty code
2016-05-10 04:24:19 +02:00
furrtek
c8d37e215b
Merge remote-tracking branch 'upstream/master'
...
Conflicts:
firmware/application/audio_thread.cpp
firmware/application/event_m0.cpp
firmware/application/time.cpp
firmware/baseband-tx/clock_recovery.cpp
firmware/baseband/stream_input.hpp
firmware/common/message.hpp
2016-05-09 21:16:24 +02:00
furrtek
569f299f42
Merge
2016-05-09 21:05:11 +02:00
furrtek
d40016ffda
Fixed LCR and Xylos transmitters
2016-05-09 20:42:20 +02:00
Jared Boone
dc2944d5e9
Make Widget::screen_rect() const.
...
Because I can.
2016-05-08 14:59:26 -07:00
Jared Boone
ab73d6155e
Improve arrow key next focus algorithm.
2016-05-08 14:59:03 -07:00
Jared Boone
72cc6569ca
Use UM10503 (user manual) suggestion for SD delay config.
2016-05-06 15:04:53 -07:00
Jared Boone
56a7b841cb
Remove CaptureThread LED control.
2016-05-02 12:53:33 -07:00
Jared Boone
eeb4645242
Move lots of capture_thread code to .cpp.
2016-05-02 12:50:49 -07:00
Jared Boone
697df07501
Move Writer implementations to ui_record_view.cpp.
2016-05-02 12:34:42 -07:00
Jared Boone
97af4585b0
Missing #includes.
2016-05-02 12:26:53 -07:00
Jared Boone
2e6230e29c
Rearrange UI code RecordView::start() to keep consistent in failure.
2016-05-02 11:55:53 -07:00
Jared Boone
3f36d8b7bf
Push record file type support into RecordView.
2016-05-02 11:44:37 -07:00
Jared Boone
68faccfd10
Update Writer default destructor syntax.
2016-05-02 11:22:14 -07:00
Jared Boone
fa8105266c
WAVFileWriter saves WAV files!
2016-05-01 11:31:20 -07:00
Jared Boone
80f94cbc29
Add File seek support.
2016-05-01 11:29:44 -07:00
Jared Boone
c5cae1034e
Forgot virtual destructor on interface class.
...
So my Files weren't getting closed properly!
2016-05-01 11:29:19 -07:00
Jared Boone
0445a842db
Rename args on Writer interface.
2016-05-01 11:07:50 -07:00
Jared Boone
2be105853e
Shrink CaptureThread stack, undid earlier increase.
...
Moved File into Writer abstraction, passed in now, not created on stack.
2016-04-30 16:55:52 -07:00
Jared Boone
6a17be1f2c
Abstract CaptureThread target class into Writer, implement RawFileWriter.
2016-04-30 16:34:50 -07:00
Jared Boone
b5fbab8e29
Pass a File into CaptureThread.
...
Groundwork for having a general output-stream interface.
2016-04-30 16:26:49 -07:00
Jared Boone
a2a2de9a23
Increase CaptureThread stack, now that File is created in new thread.
2016-04-30 15:13:54 -07:00
Jared Boone
0d6103916d
Converge File object with std::fstream. Simplify LogFile.
...
LogFile no longer watches SD card presence and tries to open/close files dynamically.
2016-04-30 15:09:34 -07:00
Jared Boone
4d6fccd8ea
Extract RecordView from AnalogAudioApp, CaptureApp.
2016-04-30 13:56:54 -07:00
Jared Boone
24192b4043
Capture: Write simple metadata for baseband and audio files.
...
Will probably turn the audio metadata file into .wav data, eventually.
2016-04-30 11:25:04 -07:00
Jared Boone
a6d41547a0
Make CaptureAppView capture functions same as AnalogAudioView.
2016-04-30 11:09:39 -07:00
Jared Boone
18e40562b5
Oops, 128K is not enough.
2016-04-29 11:27:31 -07:00
Jared Boone
12b8a1b2a9
Change next-file naming functions to work on filename stems.
...
This paves the way for writing metadata files with similar prefixes, and avoids confusing numbering of capture files with different extensions (e.g. BAD_0000.S16 and BBD_0000.S8).
2016-04-29 11:27:12 -07:00
furrtek
d55a420dfd
Fixed module loading (again), only audio tx works for now
2016-04-28 14:59:14 +02:00
Jared Boone
dc8c34487f
Speed dropped_percent() common case, ensure dropped>0 returns >0%.
2016-04-27 12:16:37 -07:00
Jared Boone
be9f3362da
Display percent of data dropped during capture to SD card.
2016-04-27 12:07:31 -07:00
Jared Boone
6ee886b90e
Expose capture state to the UI.
2016-04-27 12:06:47 -07:00
Jared Boone
a72a3489cf
Expose percent of data dropped during capture.
2016-04-27 12:04:02 -07:00
Jared Boone
11d15ec5b5
Add second tick handler for CaptureThread.
2016-04-27 12:03:43 -07:00
Jared Boone
8188b44439
Add Signal for per-second tick callbacks.
2016-04-27 12:02:17 -07:00
Jared Boone
7430e31578
Extract CaptureConfig from StreamOutput to CaptureThread.
...
So capture stats can be exposed by CaptureThread.
2016-04-27 10:56:50 -07:00
Jared Boone
75159fcc00
Use static StreamOutput::fifo for accessor methods.
2016-04-27 10:52:11 -07:00
Jared Boone
dc1ba7e6f3
Move CaptureThread::write_size into run().
2016-04-27 10:44:44 -07:00
Jared Boone
1789868b8a
Track bytes from baseband and dropped when entering capture FIFO.
2016-04-27 10:40:50 -07:00
Jared Boone
d63136c52e
Remove unused StreamInput::written().
2016-04-27 10:32:29 -07:00
Jared Boone
d2cf129fd5
Retain CaptureConfig pointer in StreamInput.
2016-04-27 10:32:06 -07:00
Jared Boone
3e08318012
Pass CaptureConfig to StreamInput as pointer.
2016-04-27 10:31:37 -07:00
Jared Boone
ca5dadab93
Set CaptureThread::thread to null after thread is released.
...
Was having a timing problem where ISR was still trying to signal thread after thread was nulled.
2016-04-27 10:13:50 -07:00
Jared Boone
4a348e2c6c
Revise CaptureThread loop to not get stuck if SD write speed too slow.
2016-04-27 10:12:21 -07:00
Jared Boone
91ee2dbb67
Move FIFO and write size to CaptureConfig structure.
...
Now configured from baseband, where write size and appropriate FIFO size is known.
2016-04-26 22:26:30 -07:00
Jared Boone
01fc6b9bc9
Remove redundant values in I2C struct.
2016-04-26 16:17:53 -07:00
Jared Boone
93ecf9ef82
Remove unused ldscript.
2016-04-26 16:16:04 -07:00
Jared Boone
0662196905
Fix audio codec I2C reliability for some HackRF units.
2016-04-26 13:06:46 -07:00
Jared Boone
ed3ac5249f
Move MessageQueue::signal into .cpp file.
2016-04-23 22:00:27 -07:00
Jared Boone
c585f3d4ea
Rename EVT_FIFO_HIGHWATER -> EVT_MASK_CAPTURE_THREAD.
2016-04-23 17:30:55 -07:00
Jared Boone
3103e9b80e
Remove unused EventDispatcher::thread_record.
2016-04-23 17:26:54 -07:00
Jared Boone
d5e21ce972
Use CaptureConfig to share state between cores.
...
Remove awful FIFO_HACK.
TODO: Lots of repeated code...
TODO: Capture thread is signalled too frequently.
2016-04-23 15:07:44 -07:00
Jared Boone
67eb62ec12
Provide AudioOutput::set_stream().
...
Assign when wanting to capture audio stream.
2016-04-23 14:55:59 -07:00
Jared Boone
7436dea51a
Add CaptureConfig structure and message.
2016-04-23 14:54:15 -07:00
Jared Boone
8b8b394792
Hide FIFO hack inside StreamOutput.
...
First step in a long refactor and evolution of the capture code.
2016-04-22 16:21:31 -07:00
Jared Boone
adf573be20
Add simple record UI to audio app.
2016-04-22 12:30:02 -07:00
Jared Boone
a6538bc48b
Rename AudioThread -> CaptureThread.
...
...since it's doing baseband capturing too, and doesn't really know what kind of data it's moving.
2016-04-22 12:15:51 -07:00
Jared Boone
b8196ee2be
Rename capture UI record objects and functions.
2016-04-22 12:08:01 -07:00
Jared Boone
f2453dd639
Consolidate bitmaps for reuse.
2016-04-22 11:57:46 -07:00
Jared Boone
27a1423309
De-constexpr a few UI constructors.
...
Because it was silly.
2016-04-22 11:18:35 -07:00
Jared Boone
61b5faf8b5
Clean up AnalogAudioView::on_show_options_modulation().
2016-04-22 10:22:47 -07:00
Jared Boone
760c73a7be
Move field.set_style()s after all participating widgets' styles are reset.
2016-04-22 10:16:42 -07:00
Jared Boone
c650536934
Hide remove_widget() in set_options_widget().
2016-04-22 10:01:17 -07:00
furrtek
2fcfdba9ea
"At least it builds !"
2016-04-21 22:12:51 +02:00
Jared Boone
051a63a222
Fix and clean up calculation of filter passband in capture mode.
2016-04-21 11:55:03 -07:00
Jared Boone
28ca45326d
Fix capture mode baseband_fs value.
2016-04-21 11:54:39 -07:00
Jared Boone
09a39f780a
Show capture file name.
2016-04-21 11:45:57 -07:00
Jared Boone
ee51d7fa67
Make room in capture mode for other controls.
2016-04-21 11:45:37 -07:00
furrtek
1b0da68d65
Merge remote-tracking branch 'upstream/master'
...
Conflicts:
firmware/application/Makefile
firmware/application/core_control.cpp
firmware/application/touch.cpp
firmware/application/ui_debug.cpp
firmware/application/ui_debug.hpp
firmware/application/ui_navigation.cpp
firmware/baseband/baseband_thread.cpp
2016-04-21 20:36:19 +02:00
Jared Boone
857fba6309
Change justification of spectrum right tick label.
2016-04-21 11:36:07 -07:00
Jared Boone
e4b86d149c
Change file recording behavior to create new file instead of appending.
2016-04-20 10:24:39 -07:00
Jared Boone
f38fca168e
Use sequential file naming for baseband capture files.
2016-04-20 10:23:59 -07:00
Jared Boone
9d635b3fcf
Use sequential file naming for audio recording.
2016-04-20 10:22:50 -07:00
Jared Boone
1c544a663b
Use automatic file naming for screen capture .png files.
2016-04-20 10:22:05 -07:00
Jared Boone
f49d04fe7a
Functions to select next filename based on matching pattern.
...
Used for capture, audio, screenshot file naming.
2016-04-20 09:57:17 -07:00
Jared Boone
7492984144
Add filesystem directory enumeration.
...
Borrow API from std::filesystem -- Boost and C++17.
2016-04-20 09:56:35 -07:00
Jared Boone
8119980370
Widen capture mode sampling rate, baseband filter.
2016-04-20 09:54:19 -07:00
Jared Boone
6de2df7c99
Enable FatFs f_findfirst, f_findnext.
2016-04-19 11:57:22 -07:00
Jared Boone
75cf0c2f4e
Update ffconf.h
...
Had to change codepage to 437 due to deprication of prior codepage 1252.
2016-04-19 10:09:17 -07:00
Jared Boone
95361b0036
Rename ffconf.h -> ffconf_template.h
...
To avoid #include problems with ffconf.h inside individual firmware executable projects.
2016-04-19 09:52:38 -07:00
Jared Boone
94c81528c1
FatFs update to R0.11a.
2016-04-19 09:51:31 -07:00
Jared Boone
ec75c00da2
Add capture mode waterfall.
2016-04-13 11:09:18 -07:00
Jared Boone
2201a9e95f
Change capture start/stop to toggle image button.
2016-04-12 11:37:58 -07:00
Jared Boone
cee5417a4a
Capture UI basic controls.
...
Tuning, LNA/VGA gain, second IF and "channel" RSSI. Use ReceiverModel, so that audio receiver parameters come across for quicker capture configuration.
2016-04-12 10:56:00 -07:00
Jared Boone
60a0d5c469
Capture mode channel stats
2016-04-12 10:51:20 -07:00
Jared Boone
10b28429e4
Add show-options event for VGAGainField.
2016-04-12 10:49:07 -07:00
Jared Boone
3e8b097588
Extract VGAGainField.
2016-04-12 10:48:24 -07:00
Jared Boone
e85503cd81
Nascent support for OOK TPMS transponders.
...
Apparently, Subaru and GMC. No CRC or other validation, no attempt to interpret packet contents yet.
2016-04-11 11:53:17 -07:00
Jared Boone
dc16aa478f
OOK slicer, clock recovery classes.
2016-04-11 11:50:03 -07:00
Jared Boone
40df73b923
Start/stop control of baseband capture.
2016-04-11 11:22:35 -07:00
Jared Boone
5558ca60d7
Enlarge capture buffers -- inter-core FIFO, SDC
2016-04-11 11:00:47 -07:00
Jared Boone
743dc9f542
Rough implementation of capture mode
2016-04-11 10:59:55 -07:00
Jared Boone
9eefd56410
StreamInput: notify other core every fourth of FIFO written.
2016-04-11 10:20:19 -07:00
Jared Boone
a5c2143ca8
Signal M0 when stream FIFO has another "chunk".
2016-04-11 10:20:19 -07:00
Jared Boone
4a1d3b14a1
Open AudioThread file on new thread.
...
Opening it in constructor was causing UI pauses.
2016-04-11 10:20:19 -07:00
Jared Boone
03dfd2b48e
...and more AudioThread cleanup.
2016-04-11 10:20:19 -07:00
Jared Boone
14d1b5fd72
Further AudioThread cleanup.
2016-04-11 10:20:19 -07:00
Jared Boone
feeb5bff6f
Move AudioThread con/destruction to proper places.
2016-04-11 10:20:19 -07:00
Jared Boone
08f4542954
Marginal attempt to simplify stream write loop.
2016-04-11 10:20:19 -07:00
Jared Boone
fc8bb635a6
Consider an incomplete write as an error.
2016-04-11 10:20:19 -07:00
Jared Boone
ba3c9dd8d1
Insist on writing stream data in buffer-sized blocks.
...
Maintaining alignment improves SD card write performance significantly.
2016-04-11 10:20:19 -07:00
Jared Boone
0d8971cd7d
Use size of provided buffer for stream write.
2016-04-11 10:20:19 -07:00
Jared Boone
b3e2e89e51
Create audio recording thread in the right place.
...
Was always creating, finding a timing issue when switching baseband modes, would freeze, probably due to a dangling pointer. TODO: Make stream recording setup synchronous.
2016-04-11 10:20:19 -07:00
Jared Boone
56e448d355
Track StreamInput bytes written
2016-04-11 10:20:19 -07:00
Jared Boone
8e14d2f4e8
Signal SD card write thread from M4 event.
2016-04-11 10:20:19 -07:00
Jared Boone
daa2f7aed0
Drain write FIFO, don't read just one block.
2016-04-11 10:20:19 -07:00
Jared Boone
aca19ae997
Factor out SD card write size.
2016-04-11 10:20:19 -07:00
Jared Boone
f94938db8e
De-template FIFO.
2016-04-11 10:20:19 -07:00
Jared Boone
59f1a32566
Semi-naive audio recording to SD card.
2016-04-11 10:20:19 -07:00
Jared Boone
c01f2d82e1
Move TPMS taps to dsp_fir_taps.hpp.
...
Will soon use in proc_record.cpp.
2016-04-11 10:18:31 -07:00
Jared Boone
1682f4700d
Move SDC CCLK to 25MHz
...
If your card can't hack it, get a new card.
2016-04-10 17:30:12 -07:00
Jared Boone
f09d803e61
Use correct SDC card present function.
...
Was using the LLD function directly -- no!
2016-04-10 17:29:14 -07:00
Jared Boone
9e1b88d85f
Enable FATFS fast seek feature.
...
Handy when appending to large baseband files.
2016-04-10 17:27:36 -07:00
Jared Boone
4ac2c540c9
Disable SDC "nice waiting" for performance.
...
Quick test indicates 4.5% better average write performance. No change in reads.
2016-04-10 17:24:28 -07:00
Jared Boone
0cb923be6d
Add SD card debug view.
...
Bus and card configuration data, write and read testing.
2016-04-10 17:16:39 -07:00
Jared Boone
12939a0f82
Support larger SDC LLD transactions
...
Use chained DMA buffers -- limit is now 16Kbytes, adjustable by LPC_SDC_SDIO_DESCRIPTOR_COUNT. More descriptors require more stack.
2016-04-10 17:15:59 -07:00
Jared Boone
f76750e55b
Add LFSR random number generator.
...
Used for SD card write/read testing, maybe other stuff eventually?
2016-04-10 16:30:28 -07:00
Jared Boone
0a9d7ec8d8
Add File::open_for_reading().
...
Barf.
2016-04-10 15:56:34 -07:00
Jared Boone
38ba02a68f
Change File::open to File::open_for_writing.
...
Not thrilled about the File API right now...
2016-04-10 15:55:01 -07:00
Jared Boone
df6593ac91
SDC: Remove commented code
2016-04-09 21:34:28 -07:00
Jared Boone
34963c7f37
SDC: Auto-off clock when no transfer.
2016-04-09 21:33:46 -07:00
Jared Boone
f8d496d9d1
Remove cpu_clock.* -- unused.
...
ClockManager does all that stuff.
2016-04-09 21:33:12 -07:00
Jared Boone
b35a8c4501
Add TPMS signal_type.
2016-04-06 17:04:40 -07:00
Jared Boone
635b1fd4c3
Extract TPMS packet stuff to separate files.
2016-04-06 17:01:54 -07:00
Jared Boone
b7c0efbb64
Add ERT commodity type.
2016-04-06 16:16:10 -07:00
Jared Boone
6571ef0c11
Prevent alternate MessageQueue constructors.
2016-02-27 21:20:16 -08:00
Jared Boone
0fae1488c4
Hide most of MessageQueue functions.
2016-02-27 21:19:51 -08:00
Jared Boone
bf348cf30a
Move message handling loops to MessageQueue.
2016-02-27 21:07:11 -08:00
Jared Boone
eb294c8e1c
Add chDbgPanic for unhandled exceptions.
2016-02-27 12:05:29 -08:00
Jared Boone
6101ca36cd
Use unique_ptr for baseband_buffer.
2016-02-23 20:21:32 -08:00
Jared Boone
3493b7d1b7
Hide BasebandThread::baseband_processor.
2016-02-23 19:56:55 -08:00
Jared Boone
a1b9f4aa1b
Simplify, generalize, share int16_t taps copy function.
...
Also prevents compiler loop unrolling in non-critical code, for code size improvement.
2016-02-23 15:04:20 -08:00
Jared Boone
9c11fdf80c
Explicit std::function nullptr checks.
...
Eliminates std::function check which tries to "_ZSt25__throw_bad_function_callv", along with 816 bytes of extra code, including some locale/wlocale/moneypunct nonsense.
2016-02-23 13:30:41 -08:00
Jared Boone
36c38e4a24
Quiet narrowing conversion warning.
2016-02-22 14:19:26 -08:00
Jared Boone
19609469a5
Quiet shift-overflow compiler warning.
2016-02-22 14:18:53 -08:00
Jared Boone
7f663f7e0c
Remove unused code.
2016-02-22 14:18:20 -08:00
Jared Boone
52016defd5
Capture screen image, save to PNG file on SD card.
2016-02-19 15:34:02 -08:00
Jared Boone
925394c54b
Bodgy code to write PNG files the size of the LCD screen.
2016-02-19 15:33:27 -08:00
Jared Boone
77eb0c5d24
ILI9341 read_pixels().
...
Improves on / abstracts prior interface, which just handed back uint16_ts from the LCD's parallel interface.
2016-02-19 15:31:56 -08:00
Jared Boone
bdaa13c103
CRC, Adler32 interfaces accept void* blocks.
...
...despite my better judgement.
2016-02-19 15:30:35 -08:00
Jared Boone
6d0995e165
Function to read bytes from 16-bit LCD interface.
...
...begin careful not to overread from the LCD, or overwrite to the buffer.
2016-02-19 15:29:00 -08:00
Jared Boone
1f79c72bf0
Remove irrelevant comment from portapack::io.
2016-02-19 15:28:15 -08:00
Jared Boone
322a15587a
Add ColorRGB888 type for data from LCD frame buffer.
2016-02-19 15:27:50 -08:00
Jared Boone
5ed76d6985
Adler32 implementation (for PNG writer).
2016-02-19 14:13:15 -08:00
Jared Boone
ac6af17b94
Fix extra, empty menu items in DebugMenuView.
...
Added TODO to prevent default construction of menu items, making this a compiler error in the future.
2016-02-19 11:22:22 -08:00
Jared Boone
daeb542086
Remove constexpr use of std::log2, std::log10.
...
GCC 4.9 doesn't care for it.
2016-02-19 10:30:26 -08:00
Jared Boone
d6d1f6b8af
Missing #include.
2016-02-19 08:57:07 -08:00
Jared Boone
40d7f3a134
Add screen capture button.
2016-02-18 21:35:46 -08:00
Jared Boone
7cf55cef52
Add File::write() that takes std::array.
2016-02-18 21:34:03 -08:00
Jared Boone
083711ceb2
Add File::open(), use inside File::open_for_append().
2016-02-18 21:33:38 -08:00
Jared Boone
6b97490794
Fix SD error icon.
...
Was missing the left half of the "X".
2016-02-18 21:32:25 -08:00
Jared Boone
1e0d34c98b
CRC internal type more suitable for ARM.
2016-02-18 21:31:51 -08:00
Jared Boone
00fb25f143
CRC class now supports reverse of input/output.
2016-02-18 20:36:32 -08:00
Jared Boone
c12833a288
Factor out a common rectangle.
2016-02-16 15:17:06 -08:00
Jared Boone
0c29308eb9
Fix FM squelch.
...
Forgot to recalibrate when adjusting normalization of float/audio signal path.
2016-02-16 11:32:38 -08:00
Jared Boone
0681f9c5df
Init message queues in M0 event dispatcher.
2016-02-16 11:23:02 -08:00
Jared Boone
7ec476cb79
Rename m4_startup.* to more appropriate core_control.*
...
Now that there is M0- and M4-related code.
2016-02-16 11:09:00 -08:00
Jared Boone
7fbe57931e
Push M0 halt code into a function.
2016-02-16 11:04:35 -08:00
Jared Boone
64da082306
Remove dead test code.
2016-02-16 10:28:35 -08:00
Jared Boone
3e2b6087c2
Tighten up radio API, stop leaking 1st/2nd IF instances.
2016-02-16 10:28:13 -08:00
Jared Boone
ef86848139
Change baseband floats to normalize at +/-1.0.
2016-02-14 12:38:50 -08:00
Jared Boone
a5ed3b20b4
Audio compressor makeup gain value was inverted. Oops.
2016-02-14 12:17:04 -08:00
Jared Boone
1cdeb1ca4e
Use audio compressor in AM/SSB receiver mode.
2016-02-13 11:19:32 -08:00
Jared Boone
9f4c8929ac
Audio compressor implementation.
2016-02-13 11:19:07 -08:00
Jared Boone
64e4cde7f5
fast_pow2() implemented.
2016-02-13 11:18:34 -08:00
Jared Boone
d2531016e5
Expose fast_log2().
2016-02-13 11:18:15 -08:00
Jared Boone
7d60b940d6
Push hardware peripherals debug views into a sub-menu.
2016-02-12 15:05:47 -08:00
Jared Boone
4321deee1e
ChibiOS memory helper functions.
2016-02-12 13:52:22 -08:00
Jared Boone
c72a443738
Relabel ChibiOS core free bytes.
2016-02-12 13:51:14 -08:00
Jared Boone
937dad62ee
Create log files on heap.
...
...for imminent refactor where user can manually start/stop logging, and maybe even change the filename! *swoon*
2016-02-10 20:53:14 -08:00
Jared Boone
58864ebbe7
Remove extra #includes.
2016-02-10 20:19:27 -08:00
Jared Boone
22e44605b6
Hide baseband queue code inside baseband "API".
2016-02-10 20:11:19 -08:00
Jared Boone
49a89b9dee
Single function to configure/enable radio.
2016-02-10 16:58:25 -08:00
Jared Boone
692a262f41
Use TPMS sampling_rate variable instead of literal.
2016-02-10 16:48:09 -08:00
Jared Boone
f5cdf8ed76
Remove unused radio:: function.
2016-02-10 16:47:36 -08:00
Jared Boone
472b0a2e79
ReceiverModel no longer uses some baseband modes.
2016-02-10 16:32:25 -08:00
Jared Boone
5cdbae495a
Digital modes no longer use ReceiverModel.
...
AIS/TPMS/ERT were changing receiver mode settings -- not my intent.
2016-02-10 16:31:52 -08:00
Jared Boone
3587300701
Remove extra #include.
2016-02-10 16:19:31 -08:00
Jared Boone
6c06549b6e
Remove reference PPM methods from ReceiverModel.
2016-02-10 15:34:33 -08:00
Jared Boone
b0e76191d7
Simplify some silly math.
2016-02-10 11:23:41 -08:00
Jared Boone
d125a5c662
Remove "K" parameter from FIFO template.
2016-02-10 10:41:06 -08:00
Jared Boone
dfbcf5bc75
Extract some constexpr math utilities to utility.hpp
...
...my dumping ground for so many random bits.
2016-02-10 10:15:42 -08:00
Jared Boone
096e961c67
Remove ChibiOS registry, thread names.
...
Only useful for debugging, but even then not very visible or useful. Gained 256 bytes of code RAM.
2016-02-09 11:36:38 -08:00
Jared Boone
ae93d8ee58
Simplify RSSI/BB DMA, extract to ThreadWait class.
...
Also saved 688 bytes of code.
2016-02-09 10:41:19 -08:00
Jared Boone
5cd423bb20
Fast log2 implementation.
...
Big improvement in code size (2034 bytes!). Baseband FFT (idle) thread CPU cut in half.
2016-02-08 12:55:06 -08:00
Jared Boone
cdd15fcf79
Rework complex16_mag_squared_to_dbv_norm() to use log2.
...
Small code size reduction and improvement in CPU effort.
2016-02-08 12:35:20 -08:00
Jared Boone
3aabd804d3
Remove commented code.
2016-02-07 21:52:36 -08:00
Jared Boone
5a66c68861
Return Widget::children() by reference.
2016-02-07 11:24:25 -08:00
Jared Boone
2b6bc03408
Remove unfinished Widget last child focus code.
2016-02-07 11:06:16 -08:00
Jared Boone
31499fea5d
Rewrite Widget::screen_pos() in terms of screen_rect().
2016-02-07 10:55:55 -08:00
Jared Boone
a420f018c7
Remove unused View::dirty_screen_rect member.
2016-02-07 10:53:40 -08:00
Jared Boone
41d4fd0044
Remove unused View::initial_focus().
2016-02-07 10:42:41 -08:00
Jared Boone
3a709c51c4
Hide more Widget member variables.
2016-02-07 10:40:06 -08:00
Jared Boone
8f8a9f2b63
Fix back button repaint/focus quirks.
2016-02-07 10:33:15 -08:00
Jared Boone
7cb3bbc9f8
Make Widget flags private, expose via methods.
2016-02-07 10:32:38 -08:00
Jared Boone
9a33fc884a
More arguments pass-by-reference.
2016-02-06 16:44:19 -08:00
Jared Boone
aae1a953fc
Init matched filter output variable.
2016-02-06 16:24:14 -08:00
Jared Boone
ac2320f0c5
Limit scope of some function variables.
2016-02-06 16:23:55 -08:00
Jared Boone
cd56847326
Remove some unused member variables.
2016-02-06 16:23:38 -08:00
Jared Boone
3172fb1ad6
Make assorted arguments pass-by-reference.
2016-02-06 16:23:20 -08:00
furrtek
ba94ce55ef
Loadmodule emergency fix
2016-02-06 23:19:28 +01:00
Jared Boone
a9451c17b4
Move PPB clock adjustment out of ReceiverModel.
2016-02-05 16:52:34 -08:00
Jared Boone
fd3f962e40
Define and utilize memory region backup_ram.
2016-02-05 16:45:23 -08:00
Jared Boone
682c87e3ff
Wrap baseband sampling rate function to radio:: function.
2016-02-05 16:36:36 -08:00
Jared Boone
0294165481
Extract LOTS of stuff into an audio API.
...
Prevent all manner of type and implementation leakage.
2016-02-05 16:25:43 -08:00
Jared Boone
1b793da17f
Expose I2C0 via portapack.hpp.
2016-02-05 16:21:03 -08:00
Jared Boone
9430c94dec
Move I2S management to application side.
2016-02-05 15:25:08 -08:00
Jared Boone
cefab197da
Add virtual destructor for ThreadBase.
...
Oops!
2016-02-05 10:44:27 -08:00
Jared Boone
80511ac93f
Improve repaint scope when widgets removed from parent.
...
Addresses flickering (again!) when switching between options views in receiver app.
2016-02-05 10:44:09 -08:00
furrtek
85103fdd54
"sdcard" folder, for clarity
2016-02-05 17:50:35 +01:00
furrtek
c81ba5be8e
"At least it builds, now"
2016-02-05 17:40:14 +01:00
Jared Boone
94a6d8340d
Add left key navigation out of newer menus.
...
TODO: Ripe for a base class or something.
2016-02-04 12:17:10 -08:00
furrtek
8009a9b543
Merge remote-tracking branch 'upstream/master'
...
Conflicts:
firmware/application/Makefile
firmware/application/analog_audio_app.cpp
firmware/application/analog_audio_app.hpp
firmware/application/event.cpp
firmware/application/irq_ipc.hpp
firmware/application/portapack.hpp
firmware/application/receiver_model.cpp
firmware/application/receiver_model.hpp
firmware/application/recent_entries.cpp
firmware/application/string_format.hpp
firmware/application/ui_debug.cpp
firmware/application/ui_debug.hpp
firmware/application/ui_menu.cpp
firmware/application/ui_navigation.cpp
firmware/application/ui_navigation.hpp
firmware/application/ui_receiver.cpp
firmware/application/ui_receiver.hpp
firmware/application/ui_sd_card_status_view.cpp
firmware/application/ui_sd_card_status_view.hpp
firmware/application/ui_setup.cpp
firmware/application/ui_setup.hpp
firmware/application/ui_spectrum.hpp
firmware/baseband-tx/dsp_fir_taps.cpp
firmware/baseband-tx/dsp_fir_taps.hpp
firmware/baseband-tx/irq_ipc_m4.cpp
firmware/baseband-tx/irq_ipc_m4.hpp
firmware/baseband-tx/proc_audiotx.cpp
firmware/baseband/Makefile
firmware/baseband/audio_output.cpp
firmware/baseband/audio_output.hpp
firmware/baseband/block_decimator.hpp
firmware/baseband/dsp_decimate.cpp
firmware/baseband/dsp_decimate.hpp
firmware/baseband/dsp_demodulate.cpp
firmware/baseband/dsp_demodulate.hpp
firmware/baseband/dsp_fir_taps.cpp
firmware/baseband/irq_ipc_m4.cpp
firmware/baseband/irq_ipc_m4.hpp
firmware/baseband/proc_am_audio.cpp
firmware/baseband/proc_am_audio.hpp
firmware/baseband/proc_nfm_audio.cpp
firmware/baseband/proc_nfm_audio.hpp
firmware/baseband/proc_wfm_audio.cpp
firmware/baseband/proc_wfm_audio.hpp
firmware/baseband/spectrum_collector.hpp
firmware/common/dsp_fir_taps.cpp
firmware/common/dsp_fir_taps.hpp
firmware/common/event.hpp
firmware/common/message.hpp
firmware/common/ui_painter.cpp
firmware/common/ui_painter.hpp
2016-02-04 11:35:55 +01:00
furrtek
6e496e2b26
Merge fixing, commit to catch up on recent files
2016-02-04 10:27:53 +01:00
Jared Boone
20137db8d0
Move code into .cpp for tiny code size improvement.
2016-02-03 22:47:44 -08:00
Jared Boone
af8c9609a8
Little code size tweak using std::move in constructors.
2016-02-03 22:47:22 -08:00
Jared Boone
cff314cbc8
Convince compiler to not inline member constructors.
2016-02-03 19:59:41 -08:00
Jared Boone
1d2dd4e19d
Old GCC on Travis-CI was cheesed off by my new syntax.
2016-02-03 17:59:46 -08:00
Jared Boone
5d4e59271a
Switch display sleep button to ImageButton.
2016-02-03 16:14:34 -08:00
Jared Boone
dd6d56cff8
SD card status view inherits from new Image class.
2016-02-03 15:50:14 -08:00
Jared Boone
84824a504f
Add UI Image and ImageButton classes.
2016-02-03 15:48:50 -08:00
Jared Boone
e57659d4cf
Convert SD card view to show icon/color for status.
2016-02-03 13:24:38 -08:00
Jared Boone
76013a656c
Add Painter.draw_bitmap for Bitmap types.
2016-02-03 13:23:46 -08:00
Jared Boone
deade67fd8
Add ui::Bitmap for two-color images.
2016-02-03 13:23:23 -08:00
Jared Boone
e2a82061d4
Update SD card status when view is shown.
2016-02-03 10:34:17 -08:00
Jared Boone
5d0b5d427a
Extract draw_bitmap from draw_glyph.
2016-02-03 10:33:54 -08:00
Jared Boone
ceef8d32d3
Use more accurate arctan for NBFM demodulation.
2016-02-02 16:15:14 -08:00
Jared Boone
ab2c5b256f
Reinstate and slightly tweak NBFM squelch.
2016-02-02 16:08:18 -08:00