cmd/k8s-operator/deploy: replace wildcards in Kubernetes Operator RBAC role definitions with verbs
fixes: #13168
Signed-off-by: Pierig Le Saux <pierig@n3xt.io>
Updates tailscale/corp#22120
Adds the ability to start the backend by reading an authkey stored in the syspolicy database (MDM). This is useful for devices that are provisioned in an unattended fashion.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
updates tailcale/corp#22371
Adds custom macOS vm tooling. See the README for
the general gist, but this will spin up VMs with unixgram
capable network interfaces listening to a named socket,
and with a virtio socket device for host-guest communication.
We can add other devices like consoles, serial, etc as needed.
The whole things is buildable with a single make command, and
everything is controllable via the command line using the TailMac
utility.
This should all be generally functional but takes a few shortcuts
with error handling and the like. The virtio socket device support
has not been tested and may require some refinement.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
Some machines have multiple network interfaces with the same MAC
address.
Updates tailscale/corp#21371
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
`DNS unavailable` was marked as a high severity warning. On Android (and other platforms), these trigger a system notification. Here we reduce the severity level to medium. A medium severity warning will still display the warning icon on platforms with a tray icon because of the `ImpactsConnectivity=true` flag being set here, but it won't show a notification anymore. If people enter an area with bad cellular reception, they're bound to receive so many of these notifications and we need to reduce notification fatigue.
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
In a93dc6cdb1 tryUpgradeToBatchingConn()
moved to build tag gated files, but the runtime.GOOS condition excluding
Android was removed unintentionally from batching_conn_linux.go. Add it
back.
Updates tailscale/corp#22348
Signed-off-by: Jordan Whited <jordan@tailscale.com>
By default, Windows sets the SIO_UDP_CONNRESET and SIO_UDP_NETRESET
options on created UDP sockets. These behaviours make the UDP socket
ICMP-aware; when the system gets an ICMP message (e.g. an "ICMP Port
Unreachable" message, in the case of SIO_UDP_CONNRESET), it will cause
the underlying UDP socket to throw an error. Confusingly, this can occur
even on reads, if the same UDP socket is used to write a packet that
triggers this response.
The Go runtime disabled the SIO_UDP_CONNRESET behavior in 3114bd6, but
did not change SIO_UDP_NETRESET–probably because that socket option
isn't documented particularly well.
Various other networking code seem to disable this behaviour, such as
the Godot game engine (godotengine/godot#22332) and the Eclipse TCF
agent (link below). Others appear to work around this by ignoring the
error returned (anacrolix/dht#16, among others).
For now, until it's clear whether this ends up in the upstream Go
implementation or not, let's also disable the SIO_UDP_NETRESET in a
similar manner to SIO_UDP_CONNRESET.
Eclipse TCF agent: https://gitlab.eclipse.org/eclipse/tcf/tcf.agent/-/blob/master/agent/tcf/framework/mdep.c
Updates #10976
Updates golang/go#68614
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I70a2f19855f8dec1bfb82e63f6d14fc4a22ed5c3
Coder has just adopted nhooyr/websocket which unfortunately changes the import path.
`github.com/coder/coder` imports `tailscale.com/net/wsconn` which was still pointing
to `nhooyr.io/websocket`, but this change updates it.
See https://coder.com/blog/websocket
Updates #13154
Change-Id: I3dec6512472b14eae337ae22c5bcc1e3758888d5
Signed-off-by: Kyle Carberry <kyle@carberry.com>
This PR modifies viewTypeForContainerType to use the last type parameter of a container type
as the value type, enabling the implementation of map-like container types where the second-to-last
(usually first) type parameter serves as the key type.
It also adds a MapContainer type to test the code generation.
Updates #12736
Signed-off-by: Nick Khyl <nickk@tailscale.com>
A SIGSEGV was observed around packet merging logic in gVisor's GRO
package.
Updates tailscale/corp#22353
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This prevents two things:
1. Crashing if there's no response body
2. Sending a nonsensical 0 response status code
Updates tailscale/corp#22357
Signed-off-by: Percy Wegmann <percy@tailscale.com>
cmd/k8s-operator,k8s-operator/sessionrecording: support recording WebSocket sessions
Kubernetes currently supports two streaming protocols, SPDY and WebSockets.
WebSockets are replacing SPDY, see
https://github.com/kubernetes/enhancements/issues/4006.
We were currently only supporting SPDY, erroring out if session
was not SPDY and relying on the kube's built-in SPDY fallback.
This PR:
- adds support for parsing contents of 'kubectl exec' sessions streamed
over WebSockets
- adds logic to distinguish 'kubectl exec' requests for a SPDY/WebSockets
sessions and call the relevant handler
Updates tailscale/corp#19821
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
Add functionality to optionally serve a health check endpoint
(off by default).
Users can enable health check endpoint by setting
TS_HEALTHCHECK_ADDR_PORT to [<addr>]:<port>.
Containerboot will then serve an unauthenticatd HTTP health check at
/healthz at that address. The health check returns 200 OK if the
node has at least one tailnet IP address, else returns 503.
Updates tailscale/tailscale#12898
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This latest version allows for building on various OpenBSD architectures.
(such as openbsd/riscv64)
Updates #8043
Change-Id: Ie9a8738e6aa96335214d5750e090db35e526a4a4
Signed-off-by: Aaron Bieber <aaron@bolddaemon.com>
... rather than abusing the generic tsapp.
Per discussion in https://github.com/gokrazy/gokrazy/pull/275
It also means we can remove stuff we don't need, like ntp or randomd.
Updates #13038
Change-Id: Iccf579c354bd3b5025d05fa1128e32f1d5bde4e4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It's too new to be supported in Debian bookworm so just remove it.
It doesn't seem to matter or help speed anything up.
Updates #13038
Change-Id: I39077ba8032bebecd75209552b88f1842c843c33
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
84adfa1ba3 made MAC addresses 1-based too, but didn't adjust this IP address
calculation which was based on the MAC address
Updates #13038
Change-Id: Idc112b303b0b85f41fe51fd61ce1c0d8a3f0f57e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The heartbeat package does nothing if not configured anyway, so don't
even put it in the image and pay the cost of it running.
Updates #13038
Updates #1866
Change-Id: Id22c0fb1f8395ad21ab0e0350973d31730e8d39f
The change in b7e48058c8 was too loose; it also captured the CLI
being run as a child process under cmd/tta.
Updates #13038
Updates #1866
Change-Id: Id410b87132938dd38ed4dd3959473c5d0d242ff5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* cmd/k8s-operator: fix DNS reconciler for dual-stack clusters
This fixes a bug where DNS reconciler logic was always assuming
that no more than one EndpointSlice exists for a Service.
In fact, there can be multiple, for example, in dual-stack
clusters, but also in other cases this is valid (as per kube docs).
This PR:
- allows for multiple EndpointSlices
- picks out the ones for IPv4 family
- deduplicates addresses
Updates tailscale/tailscale#13056
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
These three packages aren't in gokrazy/tsapp/config.json but
used to be. Unfortunately, that meant that were being included
in the resulting image. Apparently `gok` doesn't delete them or
warn about them being present on disk when they're moved from
the config file.
Updates #13038
Updates #1866
Change-Id: I54918a9e3286ea755b11dde5e9efdd433b8f8fb8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We had a mix of 0-based and 1-based nodes and MACs in logs.
Updates #13038
Change-Id: I36d1b00f7f94b37b4ae2cd439bcdc5dbee6eda4d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Using https://github.com/gokrazy/gokrazy/pull/275
This is much lower latency than logcatcher, which is higher latency
and chunkier. And this is better than getting it via 'tailscale debug
daemon-logs', which misses early interesting logs.
Updates #13038
Change-Id: I499ec254c003a9494c0e9910f9c650c8ac44ef33
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Package setting contains types for defining and representing policy settings.
It facilitates the registration of setting definitions using Register and RegisterDefinition,
and the retrieval of registered setting definitions via Definitions and DefinitionOf.
This package is intended for use primarily within the syspolicy package hierarchy,
and added in a preparation for the next PRs.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In particular, tests showing that #3824 works. But that test doesn't
actually work yet; it only gets a DERP connection. (why?)
Updates #13038
Change-Id: Ie1fd1b6a38d4e90fae7e72a0b9a142a95f0b2e8f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Similar to UseSocketOnly, but pulled out separately in case
people are doing unknown weird things.
Updates #13038
Change-Id: I7478e5cb9794439b947440b831caa798941845ea
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
getConns() is now responsible for returning both stable and unstable
conns. conn and measureFn are now passed together via connAndMeasureFn.
newConnAndMeasureFn() is responsible for constructing them.
TCP measurement timeouts are adjusted to more closely match netcheck.
Updates tailscale/corp#22114
Signed-off-by: Jordan Whited <jordan@tailscale.com>
