Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Consolidates the node display name logic from each of the clients into
tailcfg.Node. UI clients can use these names directly, rather than computing
them independently.
This eliminates a dependency on wgcfg.Endpoint,
as part of the effort to eliminate our wireguard-go fork.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
* show DNS name over hostname, removing domain's common MagicDNS suffix.
only show hostname if there's no DNS name.
but still show shared devices' MagicDNS FQDN.
* remove nerdy low-level details by default: endpoints, DERP relay,
public key. They're available in JSON mode still for those who need
them.
* only show endpoint or DERP relay when it's active with the goal of
making debugging easier. (so it's easier for users to understand
what's happening) The asterisks are gone.
* remove Tx/Rx numbers by default for idle peers; only show them when
there's traffic.
* include peers' owner login names
* add CLI option to not show peers (matching --self=true, --peers= also
defaults to true)
* sort by DNS/host name, not public key
* reorder columns
Previously, any change to endpoints or hostinfo (or hostinfo's
netinfo) would result in the long-running map request HTTP stream
being torn down and restarted, losing all compression context along
with it.
This change makes us instead send a lite map request (OmitPeers: true,
Stream: false) that doesn't subscribe to anything, and then the
coordination server knows to not close other streams for that node
when it recives a lite request.
Fixestailscale/corp#797
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously the client had heuristics to calculate which DNS search domains
to set, based on the peers' names. Unfortunately that prevented us from
doing some things we wanted to do server-side related to node sharing.
So, bump MapRequest.Version to 9 to signal that the client only uses the
explicitly configured DNS search domains and doesn't augment it with its own
list.
Updates tailscale/corp#1026
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is a replacement for the key-related parts
of the wireguard-go wgcfg package.
This is almost a straight copy/paste from the wgcfg package.
I have slightly changed some of the exported functions and types
to avoid stutter, added and tweaked some comments,
and removed some now-unused code.
To avoid having wireguard-go depend on this new package,
wgcfg will keep its key types.
We translate into and out of those types at the last minute.
These few remaining uses will be eliminated alongside
the rest of the wgcfg package.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
The fallthrough happened to work in controlclient already due to the
/etc/os-release PRETTY_NAME default, but make it explicit so it
doesn't look like an accident.
Also add it to version/distro, even though nothing needs it yet.
For now, the server will only send v6 configuration to mapversion 8 clients
as part of an early-adopter program, while we verify that the functionality
is robust.
Signed-off-by: David Anderson <danderson@tailscale.com>
Addresses #964
Still to be done:
- Figure out the correct logging lines in util/systemd
- Figure out if we need to slip the systemd.Status function anywhere
else
- Log util/systemd errors? (most of the errors are of the "you cannot do
anything about this, but it might be a bad idea to crash the program if
it errors" kind)
Assistance in getting this over the finish line would help a lot.
Signed-off-by: Christine Dodrill <me@christine.website>
util/systemd: rename the nonlinux file to appease the magic
Signed-off-by: Christine Dodrill <me@christine.website>
util/systemd: fix package name
Signed-off-by: Christine Dodrill <me@christine.website>
util/systemd: fix review feedback from @mdlayher
Signed-off-by: Christine Dodrill <me@christine.website>
cmd/tailscale{,d}: update depaware manifests
Signed-off-by: Christine Dodrill <me@christine.website>
util/systemd: use sync.Once instead of func init
Signed-off-by: Christine Dodrill <me@christine.website>
control/controlclient: minor review feedback fixes
Signed-off-by: Christine Dodrill <me@christine.website>
{control,ipn,systemd}: fix review feedback
Signed-off-by: Christine Dodrill <me@christine.website>
review feedback fixes
Signed-off-by: Christine Dodrill <me@christine.website>
ipn: fix sprintf call
Signed-off-by: Christine Dodrill <me@christine.website>
ipn: make staticcheck less sad
Signed-off-by: Christine Dodrill <me@christine.website>
ipn: print IP address in connected status
Signed-off-by: Christine Dodrill <me@christine.website>
ipn: review feedback
Signed-off-by: Christine Dodrill <me@christine.website>
final fixups
Signed-off-by: Christine Dodrill <me@christine.website>
After mapver 5's incremental netmap updates & user profiles, much of
the remaining bandwidth for streamed MapResponses were redundant,
unchanged PacketFilters. So make MapRequest.Version 6 mean that nil
means unchanged from the previous value.
Cache DNS results of earlier login.tailscale.com control dials, and use
them for future dials if DNS is slow or broken.
Fixes various issues with trickier setups with the domain's DNS server
behind a subnet router.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When building with redo, also include the git commit hash
from the proprietary repo, so that we have a precise commit
that identifies all build info (including Go toolchain version).
Add a top-level build script demonstrating to downstream distros
how to burn the right information into builds.
Adjust `tailscale version` to print commit hashes when available.
Fixes#841.
Signed-off-by: David Anderson <danderson@tailscale.com>
Also replaces the IPv6Overlay bool with use of DebugFlags, since
it's currently an experimental configuration.
Signed-off-by: David Anderson <danderson@tailscale.com>
Fix from regression in previous commit
(0e3048d8e0) that was caught by e2e
tests.
In that previous commit, the user's own profile was omitted from the
NetworkMap in the case where the user only had one node.
I was going to make support for this advertised from the client, but
turns out only "tailscale status" even uses the UserProfiles field and
fails gracefully (omits that field) if a user profile for a user is
missing, so I think we can just reuse the DeltaPeers field from the
client to ask the control server to also delta encode the user
profiles.
For the few users running 1.1.x (unstable) versions between DeltaPeers
support (1.1.82) and this (~1.1.541), they'll just sometimes have
missing names in "tailscale status --json" or "tailscale status --web"
(the only places the UserProfile is used).
The previous code read too explicitly like log.Printf("I am here1"),
log.Printf("I am here2"). It still is with this change, but prettier, and
less subject to code rearranging order.
On startup, clients do a MapRequest with empty endpoints while they
learn the DERP map to discover the STUN servers they then query to
learn their endpoints.
Set MapRequest.ReadOnly on those initial queries to not broadcast the
empty endpoints out to peers. The read results will come a half second
later (or less).
Updates tailscale/corp#557
Turns out for the particular error I was chasing, it actually returns
200 and zero data. But this code mirrors the same check in the map
poll, and is the right thing to do in the name of future debugging.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
DebugForceDisco was a development & safety knob during the the transition
to discovery. It's no longer needed.
Add MapRequest.ReadOnly to prevent clients needing to do two
peer-spamming MapRequest at start-up.
This only adds the field, not the use of the field. (The control server
needs to support it first.)
Updates tailscale/corp#557
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Also remove rebinding logic from the windows router. Magicsock will
instead rebind based on link change signals.
Signed-off-by: David Anderson <danderson@tailscale.com>
control/controlclient, wgengine/filter: extract parsePacketFilter to new constructor in wgengine/filter
Signed-off-by: chungdaniel <daniel@tailscale.com>
Also, bit of behavior change: on non-nil err but expired context,
don't reset the consecutive failure count. I don't think the old
behavior was intentional.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
NetworkMap text diffs being empty were currently used to short-circuit
calling magicsock's SetNetworkMap (via Engine.SetNetworkMap), but that
went away in c7582dc2 (0.100.0-230)
Prior to c7582dc2 (notably, in 0.100.0-225 and below, down to
0.100.0), a change in only disco key (as when a node restarts) but
without endpoint changes (as would happen for a client not behind a
NAT with random ports) could result in a "netmap diff: (none)" being
printed, as well as Engine.SetNetworkMap being skipped, leading to
broken discovery endpoints.
c7582dc2 fixed the Engine.SetNetworkMap skippage.
This change fixes the "netmap diff: (none)" print so we'll actually see when a peer
restarts with identical endpoints but a new discovery key.
This code is currently racy due to an incorrect assumption
that goal is never modified in-place, so does not require extra locking.
This change makes the assumption correct.
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
This adds a new magicsock endpoint type only used when both sides
support discovery (that is, are advertising a discovery
key). Otherwise the old code is used.
So far the new code only communicates over DERP as proof that the new
code paths are wired up. None of the actually discovery messaging is
implemented yet.
Support for discovery (generating and advertising a key) are still
behind an environment variable for now.
Updates #483
As part of disabling background STUN packets when idle, we want an
emergency override switch to turn it back on, in case it interacts
poorly in the wild. We'll send that via control, but we'll want to
plumb it down to magicsock via NetworkMap.
Updates tailscale/corp#320
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It can only be built with corp deps anyway, and having it split
from the control code makes our lives harder.
Signed-off-by: David Anderson <danderson@tailscale.com>
Instead of hard-coding the DERP map (except for cmd/tailscale netcheck
for now), get it from the control server at runtime.
And make the DERP map support multiple nodes per region with clients
picking the first one that's available. (The server will balance the
order presented to clients for load balancing)
This deletes the stunner package, merging it into the netcheck package
instead, to minimize all the config hooks that would've been
required.
Also fix some test flakes & races.
Fixes#387 (Don't hard-code the DERP map)
Updates #388 (Add DERP region support)
Fixes#399 (wgengine: flaky tests)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
By default, nothing differentiates errors or fatals from regular logs, so they just
blend into the rest of the logs.
As a bonus, if you run a test using t.Run(), the log messages printed
via the sub-t.Run() are printed at a different time from log messages
printed via the parent t.Run(), making debugging almost impossible.
This doesn't actually fix the test flake I'm looking for, but at least
I can find it in the logs now.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
If a test calls log.Printf, 'go test' horrifyingly rearranges the
output to no longer be in chronological order, which makes debugging
virtually impossible. Let's stop that from happening by making
log.Printf panic if called from any module, no matter how deep, during
tests.
This required us to change the default error handler in at least one
http.Server, as well as plumbing a bunch of logf functions around,
especially in magicsock and wgengine, but also in logtail and backoff.
To add insult to injury, 'go test' also rearranges the output when a
parent test has multiple sub-tests (all the sub-test's t.Logf is always
printed after all the parent tests t.Logf), so we need to screw around
with a special Logf that can point at the "current" t (current_t.Logf)
in some places. Probably our entire way of using subtests is wrong,
since 'go test' would probably like to run them all in parallel if you
called t.Parallel(), but it definitely can't because the're all
manipulating the shared state created by the parent test. They should
probably all be separate toplevel tests instead, with common
setup/teardown logic. But that's a job for another time.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
This depends on improved support from the control server, to send the
new subnet width (Bits) fields. If these are missing, we fall back to
assuming their value is /32.
Conversely, if the server sends Bits fields to an older client, it will
interpret them as /32 addresses. Since the only rules we allow are
"accept" rules, this will be narrower or equal to the intended rule, so
older clients will simply reject hosts on the wider subnet (fail
closed).
With this change, the internal filter.Matches format has diverged
from the wire format used by controlclient, so move the wire format
into tailcfg and convert it to filter.Matches in controlclient.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
This strictly sequences things such that c1 is fully registered in
the control server before c2 creates its poll. Failure to do this
can cause an inversion where c2's poll finishes establishing
before c1's poll starts, which results in c2 getting disconnected
rather than c1, and the test times out waiting for c1 to get kicked.
Fixes#98.
Signed-off-by: David Anderson <danderson@tailscale.com>
The test is straightforward, but it's a little perplexing if you're
not overly familiar with controlclient.
Signed-off-by: David Anderson <danderson@tailscale.com>
I removed the HTTPC field in b6fa5a69be but it was apparently still
used in [oss-skipped] tests.
Restore it, but name it so it's more obvious that it's only for
tests. (It currently is, and I'd like to keep it like that for now.)
The tests cheat at filling out web forms by directly POSTing to
the target. The target for authURLs has changed slightly, the base
authURL now redirects the user to the login page.
Additionally, the authURL cycle now checks the cookie is set
correctly, so we add cookie jars where necessary to pass the
cookie through.
Add opt-in method to request IPv6 endpoints from the control plane.
For now they should just be skipped. A previous version of this CL was
unconditional and reportedly had problems that I can't reproduce. So
make it a knob until the mystery is solved.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Breaks something deep in wireguard or magicsock's brainstem, no packets at all
can flow. All received packets fail decryption with "invalid mac1".
This reverts commit 94024355ed.
Signed-off-by: David Anderson <dave@natulte.net>
