This commit also extends the updateRelayServersSet unit tests to cover
onNodeViewsUpdate.
Fixestailscale/corp#31080
Signed-off-by: Jordan Whited <jordan@tailscale.com>
One of these tests highlighted a Geneve encap bug, which is also fixed
in this commit.
looksLikeInitMsg was passed a packet post Geneve header stripping with
slice offsets that had not been updated to account for the stripping.
Updates tailscale/corp#30903
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Pass a local.Client to systray.Run, so we can use the existing global
localClient in the cmd/tailscale CLI. Add socket flag to cmd/systray.
Updates #1708
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
Adds the eventbus to the router subsystem.
The event is currently only used on linux.
Also includes facilities to inject events into the bus.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
This will start including the sytray app in unstable builds for Linux,
unless the `ts_omit_systray` build flag is specified.
If we decide not to include it in the v1.88 release, we can pull it
back out or restrict it to unstable builds.
Updates #1708
Change-Id: Ia101a4a3005adb9118051b3416f5a64a4a45987d
Signed-off-by: Will Norris <will@tailscale.com>
In Android, we are prompting the user to select a Taildrop directory when they first receive a Taildrop: we block writes on Taildrop dir selection. This means that we cannot use Dir inside managerOptions, since the http request would not get the new Taildrop extension. This PR removes, in the Android case, the reliance on m.opts.Dir, and instead has FileOps hold the correct directory.
This expands FileOps to be the Taildrop interface for all file system operations.
Updates tailscale/corp#29211
Signed-off-by: kari-ts <kari@tailscale.com>
restore tstest
The tsidp oidc-key.json ended up in the root directory
or home dir of the user process running it.
Update this to store it in a known location respecting
the TS_STATE_DIR and flagDir options.
Fixes#16734
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
Also adds a test to kube/kubeclient to defend against the error type
returned by the client changing in future.
Fixestailscale/corp#30855
Change-Id: Id11d4295003e66ad5c29a687f1239333c21226a4
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Some systems have `sudo`, some have `su`. This tries both, increasing
the chance that we can run the file server as an unprivileged user.
Updates #14629
Signed-off-by: Percy Wegmann <percy@tailscale.com>
If a conn.Close call raced conn.ReadFromUDPAddrPort before it could
"register" itself as an active read, the conn.ReadFromUDPAddrPort would
never return.
This commit replaces all the activeRead and breakActiveReads machinery
with a channel. These constructs were only depended upon by
SetReadDeadline, and SetReadDeadline was unused.
Updates #16707
Signed-off-by: Jordan Whited <jordan@tailscale.com>
In the components where an event bus is already plumbed through, remove the
exceptions that allow it to be omitted, and update all the tests that relied on
those workarounds execute properly.
This change applies only to the places where we're already using the bus; it
does not enforce the existence of a bus in other components (yet),
Updates #15160
Change-Id: Iebb92243caba82b5eb420c49fc3e089a77454f65
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
jsonv2 now returns an error when you marshal or unmarshal a time.Duration
without an explicit format flag. This is an intentional, temporary choice until
the default [time.Duration] representation is decided (see golang/go#71631).
setting.Snapshot can hold time.Duration values inside a map[string]any,
so the jsonv2 update breaks marshaling. In this PR, we start using
a custom marshaler until that decision is made or golang/go#71664
lets us specify the format explicitly.
This fixes `tailscale syspolicy list` failing when KeyExpirationNotice
or any other time.Duration policy setting is configured.
Fixes#16683
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Ideally when we attempt to create a new port mapping, we should not return
without error when no mapping is available. We already log these cases as
unexpected, so this change is just to avoiding panicking dispatch on the
invalid result in those cases. We still separately need to fix the underlying
control flow.
Updates #16662
Change-Id: I51e8a116b922b49eda45e31cd27f6b89dd51abc8
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
This occasionally panics waiting on a nil ctx, but was missed in the
previous PR because it's quite a rare flake as it needs to progress to a
specific point in the parser.
Updates #16678
Change-Id: Ifd36dfc915b153aede36b8ee39eff83750031f95
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
When kubectl starts an interactive attach session, it sends 2 resize
messages in quick succession. It seems that particularly in HTTP mode,
we often receive both of these WebSocket frames from the underlying
connection in a single read. However, our parser currently assumes 0-1
frames per read, and leaves the second frame in the read buffer until
the next read from the underlying connection. It doesn't take long after
that before we end up failing to skip a control message as we normally
should, and then we parse a control message as though it will have a
stream ID (part of the Kubernetes protocol) and error out.
Instead, we should keep parsing frames from the read buffer for as long
as we're able to parse complete frames, so this commit refactors the
messages parsing logic into a loop based on the contents of the read
buffer being non-empty.
k/k staging/src/k8s.io/kubectl/pkg/cmd/attach/attach.go for full
details of the resize messages.
There are at least a couple more multiple-frame read edge cases we
should handle, but this commit is very conservatively fixing a single
observed issue to make it a low-risk candidate for cherry picking.
Updates #13358
Change-Id: Iafb91ad1cbeed9c5231a1525d4563164fc1f002f
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
This update introduces support for DNS records associated with ProxyGroup egress services, ensuring that the ClusterIP Service IP is used instead of Pod IPs.
Fixes#15945
Signed-off-by: Raj Singh <raj@tailscale.com>
Previously, we used a non-nil Location as an indicator that a peer is a Mullvad exit node.
However, this is not, or no longer, reliable, since regular exit nodes may also have a non-nil Location,
such as when traffic steering is enabled for a tailnet.
In this PR, we update the plaintext `tailscale status` output to omit only Mullvad exit nodes, rather than all
exit nodes with a non-nil Location. The JSON output remains unchanged and continues to include all peers.
Updates tailscale/corp#30614
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In #16625, I introduced a mechanism for sending the selected exit node
to Control via tailcfg.Hostinfo.ExitNodeID as part of the MapRequest.
@nickkhyl pointed out that LocalBackend.doSetHostinfoFilterServices
needs to be triggered in order to actually send this update. This
patch adds that command. It also prevents the client from sending
"auto:any" in that field, because that’s not a real exit node ID.
This patch also fills in some missing checks in TestConfigureExitNode.
Updates tailscale/corp#30536
Signed-off-by: Simon Law <sfllaw@tailscale.com>
Update nixpkgs-unstable to include newer golang
to satisfy go.mod requirement of 1.24.4
Update vendor hash to current.
Updates #15015
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
This commit adds a advertise subcommand for tailscale serve, that would declare the node
as a service proxy for a service. This command only adds the service to node's list of
advertised service, but doesn't modify the list of services currently advertised.
Fixestailscale/corp#28016
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
When a client selects a particular exit node, Control may use that as
a signal for deciding other routes.
This patch causes the client to report whenever the current exit node
changes, through tailcfg.Hostinfo.ExitNodeID. It relies on a properly
set ipn.Prefs.ExitNodeID, which should already be resolved by
`tailscale set`.
Updates tailscale/corp#30536
Signed-off-by: Simon Law <sfllaw@tailscale.com>
This commit reverts the key of Web field in ipn.ServiceConfig to use FQDN instead of service
name for the host part of HostPort. This change is because k8s operator already build base on
the assumption of the part being FQDN. We don't want to break the code with dependency.
Fixestailscale/corp#30695
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
