Instead of every module having to come up with a set of test methods for
the event bus, this handful of test helpers hides a lot of the needed
setup for the testing of the event bus.
The tests in portmapper is also ported over to the new helpers.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
udprelay.Server is lazily initialized when the first request is received
over peerAPI. These early requests have a high chance of failure until
the first address discovery cycle has completed.
Return an ErrServerNotReady error until the first address discovery
cycle has completed, and plumb retry handling for this error all the
way back to the client in relayManager.
relayManager can now retry after a few seconds instead of waiting for
the next path discovery cycle, which could take another minute or
longer.
Updates tailscale/corp#27502
Signed-off-by: Jordan Whited <jordan@tailscale.com>
I earlier thought this saved a second of CPU even on a fast machine,
but I think when I was previously measuring, I still had a 4096 bit
RSA key being generated in the code I was measuring.
Measuring again for this, it's plenty fast.
Prep for using this package more, for derp, etc.
Updates #16315
Change-Id: I4c9008efa9aa88a3d65409d6ffd7b3807f4d75e9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If you had HTTPS_PROXY=https://some-valid-cert.example.com running a
CONNECT proxy, we should've been able to do a TLS CONNECT request to
e.g. controlplane.tailscale.com:443 through that, and I'm pretty sure
it used to work, but refactorings and lack of integration tests made
it regress.
It probably regressed when we added the baked-in LetsEncrypt root cert
validation fallback code, which was testing against the wrong hostname
(the ultimate one, not the one which we were being asked to validate)
Fixes#16222
Change-Id: If014e395f830e2f87f056f588edacad5c15e91bc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Resolver.PreferGo didn't used to work on Windows.
It was fixed in 2022, though. (https://github.com/golang/go/issues/33097)
Updates #5161
Change-Id: I4e1aeff220ebd6adc8a14f781664fa6a2068b48c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The first packet fragment guard had an additional guard clause that was
incorrectly comparing a length in bytes to a length in octets, and was
also comparing what should have been an entire IPv4 through transport
header length to a subprotocol payload length. The subprotocol header
size guards were otherwise protecting against short transport headers,
as is the conservative non-first fragment minimum offset size. Add an
explicit disallowing of fragmentation for TSMP for the avoidance of
doubt.
Updates #cleanup
Updates #5727
Signed-off-by: James Tucker <james@tailscale.com>
During a short period of packet loss, a TCP connection to the home DERP
may be maintained. If no other regions emerge as winners, such as when
all regions but one are avoided/disallowed as candidates, ensure that
the current home region, if still active, is not dropped as the
preferred region until it has failed two keepalives.
Relatedly apply avoid and no measure no home to ICMP and HTTP checks as
intended.
Updates tailscale/corp#12894
Updates tailscale/corp#29491
Signed-off-by: James Tucker <james@tailscale.com>
The relay server now fetches IPs from local interfaces and external
perspective IP:port's via netcheck (STUN).
Updates tailscale/corp#27502
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Using WINHTTP_AUTOPROXY_ALLOW_AUTOCONFIG on Windows versions older than Windows 10 1703 (build 15063)
is not supported and causes WinHttpGetProxyForUrl to fail with ERROR_INVALID_PARAMETER. This results in failures
reaching the control on environments where a proxy is required.
We use wingoes version detection to conditionally set the WINHTTP_AUTOPROXY_ALLOW_AUTOCONFIG flag
on Windows builds greater than 15063.
While there, we also update proxy detection to use WINHTTP_AUTO_DETECT_TYPE_DNS_A, as DNS-based proxy discovery
might be required with Active Directory and in certain other environments.
Updates tailscale/corp#29168
Fixes#879
Signed-off-by: Nick Khyl <nickk@tailscale.com>
fixestailscale/corp#25612
We now keep track of any dns configurations which we could not
compile. This gives RecompileDNSConfig a configuration to
attempt to recompile and apply when the OS pokes us to indicate
that the interface dns servers have changed/updated. The manager config
will remain unset until we have the required information to compile
it correctly which should eliminate the problematic SERVFAIL
responses (especially on macOS 15).
This also removes the missingUpstreamRecovery func in the forwarder
which is no longer required now that we have proper error handling
and recovery manager and the client.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
This fixes the implementation and test from #15208 which apparently
never worked.
Ignore the metacert when counting the number of expected certs
presented.
And fix the test, pulling out the TLSConfig setup code into something
shared between the real cmd/derper and the test.
Fixes#15579
Change-Id: I90526e38e59f89b480629b415f00587b107de10a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In this PR, we make DNS registration behavior configurable via the EnableDNSRegistration policy setting.
We keep the default behavior unchanged, but allow admins to either enforce DNS registration and dynamic
DNS updates for the Tailscale interface, or prevent Tailscale from modifying the settings configured in
the network adapter's properties or by other means.
Updates #14917
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Commit 0841477 moved ServerEndpoint to an independent package. Move its
tests over as well.
Updates tailscale/corp#27502
Signed-off-by: Jordan Whited <jordan@tailscale.com>
In this PR, we make the "user-dial-routes" behavior default on all platforms except for iOS and Android.
It can be disabled by setting the TS_DNS_FORWARD_USE_ROUTES envknob to 0 or false.
Updates #12027
Updates #13837
Signed-off-by: Nick Khyl <nickk@tailscale.com>
ServerEndpoint will be used within magicsock and potentially elsewhere,
which should be possible without needing to import the server
implementation itself.
Updates tailscale/corp#27502
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Android is Linux, but doesn't use Linux DNS managers (or D-Bus).
Updates #12614
Change-Id: I487802ac74a259cd5d2480ac26f7faa17ca8d1c3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The previous strategy assumed clients maintained adequate state to
understand the relationship between endpoint allocation and the server
it was allocated on.
magicsock will not have awareness of the server's disco key
pre-allocation, it only understands peerAPI address at this point. The
second client to allocate on the same server could trigger
re-allocation, breaking a functional relay server endpoint.
If magicsock needs to force reallocation we can add opt-in behaviors
for this later.
Updates tailscale/corp#27502
Signed-off-by: Jordan Whited <jordan@tailscale.com>
tstime.GoDuration JSON serializes with time.Duration.String(), which is
more human-friendly than nanoseconds.
ServerEndpoint is currently experimental, therefore breaking changes
are tolerable.
Updates tailscale/corp#27502
Signed-off-by: Jordan Whited <jordan@tailscale.com>
When an event bus is configured publish an event each time a new port mapping
is updated. Publication is unconditional and occurs prior to calling any
callback that is registered. For now, the callback is still fired in a separate
goroutine as before -- later, those callbacks should become subscriptions to
the published event.
For now, the event type is defined as a new type here in the package. We will
want to move it to a more central package when there are subscribers. The event
wrapper is effectively a subset of the data exported by the internal mapping
interface, but on a concrete struct so the bus plumbing can inspect it.
Updates #15160
Change-Id: I951f212429ac791223af8d75b6eb39a0d2a0053a
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
In preparation for adding more parameters (and later, moving some away), rework
the portmapper constructor to accept its arguments on a Config struct rather
than positionally.
This is a breaking change to the function signature, but one that is very easy
to update, and a search of GitHub reveals only six instances of usage outside
clones and forks of Tailscale itself, that are not direct copies of the code
fixed up here.
While we could stub in another constructor, I think it is safe to let those
folks do the update in-place, since their usage is already affected by other
changes we can't test for anyway.
Updates #15160
Change-Id: I9f8a5e12b38885074c98894b7376039261b43f43
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
This adds netx.DialFunc, unifying a type we have a bazillion other
places, giving it now a nice short name that's clickable in
editors, etc.
That highlighted that my earlier move (03b47a55c7956) of stuff from
nettest into netx moved too much: it also dragged along the memnet
impl, meaning all users of netx.DialFunc who just wanted netx for the
type definition were instead also pulling in all of memnet.
So move the memnet implementation netx.Network into memnet, a package
we already had.
Then use netx.DialFunc in a bunch of places. I'm sure I missed some.
And plenty remain in other repos, to be updated later.
Updates tailscale/corp#27636
Change-Id: I7296cd4591218e8624e214f8c70dab05fb884e95
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We want to be able to use the netx.Network (and RealNetwork
implemementation) outside of tests, without linking "testing".
So split out the non-test stuff of nettest into its own package.
We tend to use "foox" as the convention for things we wish were in the
standard library's foo package, so "netx" seems consistent.
Updates tailscale/corp#27636
Change-Id: I1911d361f4fbdf189837bf629a20f2ebfa863c44
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To avoid ephemeral port / TIME_WAIT exhaustion with high --count
values, and to eventually detect leaked connections in tests. (Later
the memory network will register a Cleanup on the TB to verify that
everything's been shut down)
Updates tailscale/corp#27636
Change-Id: Id06f1ae750d8719c5a75d871654574a8226d2733
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Android >=14 forbids the use of netlink sockets, and in some configurations
can kill apps that try.
Fixes#9836
Signed-off-by: David Anderson <dave@tailscale.com>
Otherwise this was repeated closing control/derp connections all the time
on netmon changes. Arguably we should do this on all platforms?
Updates #5794
Change-Id: If6bbeff554235f188bab2a40ab75e08dd14746b2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This commit implements an experimental UDP relay server. The UDP relay
server leverages the Disco protocol for a 3-way handshake between
client and server, along with 3 new Disco message types for said
handshake. These new Disco message types are also considered
experimental, and are not yet tied to a capver.
The server expects, and imposes, a Geneve (Generic Network
Virtualization Encapsulation) header immediately following the underlay
UDP header. Geneve protocol field values have been defined for Disco
and WireGuard. The Geneve control bit must be set for the handshake
between client and server, and unset for messages relayed between
clients through the server.
Updates tailscale/corp#27101
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Otherwise you can get stuck finding minor ones nonstop.
Fixes#15484
Change-Id: I7f98ac338c0b32ec1b9fdc47d053207b5fc1bf23
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It only affected js/wasm and tamago.
Updates tailscale/corp#24697
Change-Id: I8fd29323ed9b663fe3fd8d4a86f26ff584a3e134
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Currently nobody calls SetTailscaleInterfaceName yet, so this is a
no-op. I checked oss, android, and the macOS/iOS client. Nobody calls
this, or ever did.
But I want to in the future.
Updates #15408
Updates #9040
Change-Id: I05dfabe505174f9067b929e91c6e0d8bc42628d7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
updates tailscale/corp#27145
We require a means to trigger a recompilation of the DNS configuration
to pick up new nameservers for platforms where we blend the interface
nameservers from the OS into our DNS config.
Notably, on Darwin, the only API we have at our disposal will, in rare instances,
return a transient error when querying the interface nameservers on a link change if
they have not been set when we get the AF_ROUTE messages for the link
update.
There's a corresponding change in corp for Darwin clients, to track
the interface namservers during NEPathMonitor events, and call this
when the nameservers change.
This will also fix the slightly more obscure bug of changing nameservers
while tailscaled is running. That change can now be reflected in
magicDNS without having to stop the client.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
This adds a new helper to the netmon package that allows us to
rate-limit log messages, so that they only print once per (major)
LinkChange event. We then use this when constructing the portmapper, so
that we don't keep spamming logs forever on the same network.
Updates #13145
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I6e7162509148abea674f96efd76be9dffb373ae4
