The `tailscale web` UI is the primary interface for Synology and Home
Assistant users (and perhaps others), so is the logical place to put our
open source license notices. I don't love adding things to what is
currently a very minimal UI, but I'm not sure of a better option.
Updates tailscale/corp#5780
Signed-off-by: Will Norris <will@tailscale.com>
(cherry picked from commit f03a63910d)
Fixes an panic in `(*magicsock.Conn).ServeHTTPDebug` when the
`recentPongs` ring buffer for an endpoint wraps around.
Signed-off-by: Colin Adler <colin1adler@gmail.com>
(cherry picked from commit 9c8bbc7888)
It was previously using jobcontrol to achieve this, but that apparently
doesn't work when there is no tty. This makes it so that it directly
handles SIGINT and SIGTERM and passes it on to tailscaled. I tested this
works on a Digital Ocean K8s cluster.
Fixes#5512
Signed-off-by: Maisem Ali <maisem@tailscale.com>
(cherry picked from commit 060ecb010f)
If we accept a forwarded TCP connection before dialing, we can
erroneously signal to a client that we support IPv6 (or IPv4) without
that actually being possible. Instead, we only complete the client's TCP
handshake after we've dialed the outbound connection; if that fails, we
respond with a RST.
Updates #5425 (maybe fixes!)
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
(cherry picked from commit 9240f5c1e2)
Apparently the validate route doesn't check content-types or handle
hujson with comments correctly. This patch makes gitops-pusher convert
the hujson to normal json.
Signed-off-by: Xe <xe@tailscale.com>
Signed-off-by: Xe <xe@tailscale.com>
(cherry picked from commit 3564fd61b5)
If ExtraRecords (Hosts) are specified without a corresponding split
DNS route and global DNS is specified, then program the host OS DNS to
use 100.100.100.100 so it can blend in those ExtraRecords.
Updates #1543
Change-Id: If49014a5ecc8e38978ff26e54d1f74fe8dbbb9bc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We were just outputting them to the terminal, but that's hard to debug
because we immediately tear down the terminal when getting an error.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This makes a "modified externally" error turn into a "modified externally" warning. It means CI won't fail if someone does something manually in the admin console.
Signed-off-by: Xe <xe@tailscale.com>
The next time we update the toolchain, all of the CI
Actions will automatically use it when go.mod is updated.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
It is unclear whether the lack of checking nil-ness of slices
was an oversight or a deliberate feature.
Lacking a comment, the assumption is that this was an oversight.
Also, expand the logic to perform cycle detection for recursive slices.
We do this on a per-element basis since a slice is semantically
equivalent to a list of pointers.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Adds an on-demand GitHub Action that publishes the package to the npm
registry (currently under tailscale-connect, will be moved to
@tailscale/connect once we get control of the npm org).
Makes the package.json for the NPM package be dynamically generated to
have the current Tailscale client version.
Updates #5415
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
On sufficiently large tailnets, even writing the peer header (~95 bytes)
can result in a large amount of data that needs to be serialized and
deserialized. Only write headers for peers that need to have their
configuration changed.
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
Avoid contention from fetching status for all peers, and instead fetch
status for a single peer.
Updates tailscale/coral#72
Signed-off-by: James Tucker <james@tailscale.com>
Somehow I accidentally set the wrong registry value here.
It should be DisableDynamicUpdate=1 and not EnableDNSUpdate=0.
This is a regression from 545639e.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This lets the control plane can make HTTP requests to nodes.
Then we can use this for future things rather than slapping more stuff
into MapResponse, etc.
Change-Id: Ic802078c50d33653ae1f79d1e5257e7ade4408fd
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I was working on my "dump iptables rules using only syscalls" branch and
had a bunch of C structure decoding to do. Rather than manually
calculating the padding or using unsafe trickery to actually cast
variable-length structures to Go types, I'd rather use a helper package
that deals with padding for me.
Padding rules were taken from the following article:
http://www.catb.org/esr/structure-packing/
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
In addition to printing goroutine stacks, explicitly track all in-flight
operations and print them when the watchdog triggers (along with the
time they were started at). This should make debugging watchdog failures
easier, since we can look at the longest-running operation(s) first.
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
Prior to this change, if BIRD stops responding wgengine.watchdogEngine
will crash tailscaled.
This happens because in wgengine.userspaceEngine, we end up blocking
forever trying to write a request to or read a response from BIRD with
wgLock held, and then future watchdog'd calls will block on acquiring
that mutex until the watchdog kills the process. With the timeout, we at
least get the chance to print an error message and decide whether we
want to crash or not.
Updates tailscale/coral#72
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
Add a new lookupTypeHasher function that is just a cached front-end
around the makeTypeHasher function.
We do not need to worry about the recursive type cycle issue that
made getTypeInfo more complicated since makeTypeHasher
is not directly recursive. All calls to itself happen lazily
through a sync.Once upon first use.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The entry logic of Hash has extra complexity to make sure
we always have an addressable value on hand.
If not, we heap allocate the input.
For this reason we document that there are performance benefits
to always providing a pointer.
Rather than documenting this, just enforce it through generics.
Also, delete the unused HasherForType function.
It's an interesting use of generics, but not well tested.
We can resurrect it from code history if there's a need for it.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This helps pprof better identify which Go kinds take the most time
since the kind is always in the function name.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This helps pprof better identify which Go kinds take the most time
since the kind is always in the function name.
There is a minor adjustment where we hash the length of the map
to be more on the cautious side.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Rather than having two copies []fieldInfo,
just maintain one and perform merging in the same pass.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This helps pprof better identify which Go kinds take the most time
since the kind is always in the function name.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Use of reflect.Value.SetXXX panics if the provided argument was
obtained from an unexported struct field.
Instead, pass an unsafe.Pointer around and convert to a
reflect.Value when necessary (i.e., for maps and interfaces).
Converting from unsafe.Pointer to reflect.Value guarantees that
none of the read-only bits will be populated.
When running in race mode, we attach type information to the pointer
so that we can type check every pointer operation.
This also type-checks that direct memory hashing is within
the valid range of a struct value.
We add test cases that previously caused deephash to panic,
but now pass.
Performance:
name old time/op new time/op delta
Hash 14.1µs ± 1% 14.1µs ± 1% ~ (p=0.590 n=10+9)
HashPacketFilter 2.53µs ± 2% 2.44µs ± 1% -3.79% (p=0.000 n=9+10)
TailcfgNode 1.45µs ± 1% 1.43µs ± 0% -1.36% (p=0.000 n=9+9)
HashArray 318ns ± 2% 318ns ± 2% ~ (p=0.541 n=10+10)
HashMapAcyclic 32.9µs ± 1% 31.6µs ± 1% -4.16% (p=0.000 n=10+9)
There is a slight performance gain due to the use of unsafe.Pointer
over reflect.Value methods. Also, passing an unsafe.Pointer (1 word)
on the stack is cheaper than passing a reflect.Value (3 words).
Performance gains are diminishing since SHA-256 hashing now dominates the runtime.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
When built with "deephash_debug", print the set of HashXXX methods.
Example usage:
$ go test -run=GetTypeHasher/string_slice -tags=deephash_debug
U64(2)+U64(3)+S("foo")+U64(3)+S("bar")+FIN
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Rather than separate functions to hash each kind,
just rely on the fact that these are direct memory hashable,
thus simplifying the code.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
