When an event bus is plumbed in, use it to subscribe and react to port mapping
updates instead of using the client's callback mechanism. For now, the callback
remains available as a fallback when an event bus is not provided.
Updates #15160
Change-Id: I026adca44bf6187692ee87ae8ec02641c12f7774
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
When an event bus is configured publish an event each time a new port mapping
is updated. Publication is unconditional and occurs prior to calling any
callback that is registered. For now, the callback is still fired in a separate
goroutine as before -- later, those callbacks should become subscriptions to
the published event.
For now, the event type is defined as a new type here in the package. We will
want to move it to a more central package when there are subscribers. The event
wrapper is effectively a subset of the data exported by the internal mapping
interface, but on a concrete struct so the bus plumbing can inspect it.
Updates #15160
Change-Id: I951f212429ac791223af8d75b6eb39a0d2a0053a
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
In preparation for adding more parameters (and later, moving some away), rework
the portmapper constructor to accept its arguments on a Config struct rather
than positionally.
This is a breaking change to the function signature, but one that is very easy
to update, and a search of GitHub reveals only six instances of usage outside
clones and forks of Tailscale itself, that are not direct copies of the code
fixed up here.
While we could stub in another constructor, I think it is safe to let those
folks do the update in-place, since their usage is already affected by other
changes we can't test for anyway.
Updates #15160
Change-Id: I9f8a5e12b38885074c98894b7376039261b43f43
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Although, at the moment, we do not yet require an event bus to be present, as
we start to add more pieces we will want to ensure it is always available. Add
a new constructor and replace existing uses of new(tsd.System) throughout.
Update generated files for import changes.
Updates #15160
Change-Id: Ie5460985571ade87b8eac8b416948c7f49f0f64b
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Temporarily make sure that the HA Ingress reconciler does not run,
as we do not want to release this to stable just yet.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
We now have a tailscale/alpine-base:3.19 use that as the default base image.
Updates tailscale/tailscale#15328
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This is a very dumb fix as it has an unbounded worst case runtime. IP
allocation needs to be done in a more sane way in a follow-up.
Updates #15367
Signed-off-by: James Tucker <james@tailscale.com>
Bumps Alpine 3.18 -> 3.19.
Alpine 3.19 links iptables to nftables-based
implementation that can break hosts that don't
support nftables.
Link iptables back to the legacy implementation
till we have some certainty that changing to
nftables based implementation will not break existing
setups.
Updates tailscale/tailscale#15328
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/{k8s-operator,containerboot}: check TLS cert before advertising VIPService
- Ensures that Ingress status does not advertise port 443 before
TLS cert has been issued
- Ensure that Ingress backends do not advertise a VIPService
before TLS cert has been issued, unless the service also
exposes port 80
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
ipn/store/kubestore: skip cache for the write replica in cert share mode
This is to avoid issues where stale cache after Ingress recreation
causes the certs not to be re-issued.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
When compiled into TailscaleKit.framework (via the libtailscale
repository), os.Executable() returns an error instead of the name of the
executable. This commit adds another branch to the switch statement that
enumerates platforms which behave in this manner, and defaults to
"tsnet" in the same manner as those other platforms.
Fixes#15410.
Signed-off-by: James Nugent <james@jen20.com>
Minimal mitigation that doesn't do the full refactor that's probably
warranted.
Updates #15402
Change-Id: I79fd91de0e0661d25398f7d95563982ed1d11561
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
fixestailscale/tailscale#15394
In the current iteration, usage of the memstore for the audit
logger is expected on some platforms.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
Add a label which differentiates the address family
for STUN checks.
Also initialize the derpprobe_attempts_total and
derpprobe_seconds_total metrics by adding 0 for
the alternate fail/ok case.
Updates tailscale/corp#27249
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
On Windows and Android, peerAPIListeners may be initialized after a link change.
This commit adds log statements to make it easier to trace this flow.
Updates #14393
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Only send a stored raw map message in reply to a streaming map response.
Otherwise a non-streaming map response might pick it up first, and
potentially drop it. This guarantees that a map response sent via
AddRawMapResponse will be picked up by the main map response loop in the
client.
Fixes#15362
Signed-off-by: James Sanderson <jsanderson@tailscale.com>
These tests aren't perfect, nor is this complete coverage, but this is a
set of coverage that is at least stable.
Updates #15367
Signed-off-by: James Tucker <james@tailscale.com>
Currently nobody calls SetTailscaleInterfaceName yet, so this is a
no-op. I checked oss, android, and the macOS/iOS client. Nobody calls
this, or ever did.
But I want to in the future.
Updates #15408
Updates #9040
Change-Id: I05dfabe505174f9067b929e91c6e0d8bc42628d7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To let you easily run multiple tailscaled instances for development
and let you route CLI commands to the right one.
Updates #15145
Change-Id: I06b6a7bf024f341c204f30705b4c3068ac89b1a2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I noticed logs on one of my machines where it can't auto-update with
scary log spam about "failed to apply tailnet-wide default for
auto-updates".
This avoids trying to do the EditPrefs if we know it's just going to
fail anyway.
Updates #282
Change-Id: Ib7db3b122185faa70efe08b60ebd05a6094eed8c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Noticed while working on a dev tool that uses local.Client.
Updates #cleanup
Change-Id: I981efff74a5cac5f515755913668bd0508a4aa14
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Switch from using the Comment field to a ts-scoped annotation for
tracking which operators are cooperating over ownership of a
VIPService.
Updates tailscale/corp#24795
Change-Id: I72d4a48685f85c0329aa068dc01a1a3c749017bf
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
cmd/k8s-operator,k8s-operator: allow using LE staging endpoint for Ingress
Allow to optionally use LetsEncrypt staging endpoint to issue
certs for Ingress/HA Ingress, so that it is easier to
experiment with initial Ingress setup without hiting rate limits.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
(*LocalBackend).setControlClientLocked() is called to both set and reset b.cc.
We shouldn't attempt to start the audit logger when b.cc is being reset (i.e., cc is nil).
However, it's fine to start the audit logger if b.cc implements auditlog.Transport, even if it's not a controlclient.Auto but a mock control client.
In this PR, we fix both issues and add an assertion that controlclient.Auto is an auditlog.Transport. This ensures a compile-time failure if controlclient.Auto ever stops being a valid transport due to future interface or implementation changes.
Updates tailscale/corp#26435
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Resetting LocalBackend's netmap without also unconfiguring wgengine to reset routes, DNS, and the killswitch
firewall rules may cause connectivity issues until a new netmap is received.
In some cases, such as when bootstrap DNS servers are inaccessible due to network restrictions or other reasons,
or if the control plane is experiencing issues, this can result in a complete loss of connectivity until the user disconnects
and reconnects to Tailscale.
As LocalBackend handles state resets in (*LocalBackend).resetForProfileChangeLockedOnEntry(), and this includes
resetting the netmap, resetting the current netmap in (*LocalBackend).Start() is not necessary.
Moreover, it's harmful if (*LocalBackend).Start() is called more than once for the same profile.
In this PR, we update resetForProfileChangeLockedOnEntry() to reset the packet filter and remove
the redundant resetting of the netmap and packet filter from Start(). We also update the state machine
tests and revise comments that became inaccurate due to previous test updates.
Updates tailscale/corp#27173
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This adds a portable way to do a raw LocalAPI request without worrying
about the Unix-vs-macOS-vs-Windows ways of hitting the LocalAPI server.
(It was already possible but tedious with 'tailscale debug local-creds')
Updates tailscale/corp#24690
Change-Id: I0828ca55edaedf0565c8db192c10f24bebb95f1b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If conffile is used to configure tailscaled, always update
currently advertised services from conffile, even if they
are empty in the conffile, to ensure that it is possible
to transition to a state where no services are advertised.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This makes the web server running inside tailscaled on 100.100.100.100:80 support requests with `Host: 100.100.100.100:80` and its IPv6 equivalent.
Prior to this commit, the web server replied to such requests with a redirect to the node's Tailscale IP:5252.
Fixes https://github.com/tailscale/tailscale/issues/14415
Signed-off-by: Alex Klyubin <klyubin@gmail.com>
There was a flaky failure case where renaming a TLS hostname for an
ingress might leave the old hostname dangling in tailscaled config. This
happened when the proxygroup reconciler loop had an outdated resource
version of the config Secret in its cache after the
ingress-pg-reconciler loop had very recently written it to delete the
old hostname. As the proxygroup reconciler then did a patch, there was
no conflict and it reinstated the old hostname.
This commit updates the patch to an update operation so that if the
resource version is out of date it will fail with an optimistic lock
error. It also checks for equality to reduce the likelihood that we make
the update API call in the first place, because most of the time the
proxygroup reconciler is not even making an update to the Secret in the
case that the hostname has changed.
Updates tailscale/corp#24795
Change-Id: Ie23a97440063976c9a8475d24ab18253e1f89050
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
updates tailscale/corp#27145
We require a means to trigger a recompilation of the DNS configuration
to pick up new nameservers for platforms where we blend the interface
nameservers from the OS into our DNS config.
Notably, on Darwin, the only API we have at our disposal will, in rare instances,
return a transient error when querying the interface nameservers on a link change if
they have not been set when we get the AF_ROUTE messages for the link
update.
There's a corresponding change in corp for Darwin clients, to track
the interface namservers during NEPathMonitor events, and call this
when the nameservers change.
This will also fix the slightly more obscure bug of changing nameservers
while tailscaled is running. That change can now be reflected in
magicDNS without having to stop the client.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
cmd/k8s-operator: configure HA Ingress replicas to share certs
Creates TLS certs Secret and RBAC that allows HA Ingress replicas
to read/write to the Secret.
Configures HA Ingress replicas to run in read-only mode.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Update the HA Ingress controller to wait until it sees AdvertisedServices
config propagated into at least 1 Pod's prefs before it updates the status
on the Ingress, to ensure the ProxyGroup Pods are ready to serve traffic
before indicating that the Ingress is ready
Updates tailscale/corp#24795
Change-Id: I1b8ce23c9e312d08f9d02e48d70bdebd9e1a4757
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
The use of html/template causes reflect-based linker bloat. Longer
term we have options to bring the UI back to iOS, but for now, cut
it out.
Updates #15297
Signed-off-by: David Anderson <dave@tailscale.com>
Allows the use of tsweb without pulling in all of the heavy prometheus
client libraries, protobuf and so on.
Updates #15160
Signed-off-by: David Anderson <dave@tailscale.com>
This PR adds some custom logic for reading and writing
kube store values that are TLS certs and keys:
1) when store is initialized, lookup additional
TLS Secrets for this node and if found, load TLS certs
from there
2) if the node runs in certs 'read only' mode and
TLS cert and key are not found in the in-memory store,
look those up in a Secret
3) if the node runs in certs 'read only' mode, run
a daily TLS certs reload to memory to get any
renewed certs
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
When the Ingress is updated to a new hostname, the controller does not
currently clean up the old VIPService from control. Fix this up to parse
the ownership comment correctly and write a test to enforce the improved
behaviour
Updates tailscale/corp#24795
Change-Id: I792ae7684807d254bf2d3cc7aa54aa04a582d1f5
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
