When an event bus is configured publish an event each time a new port mapping
is updated. Publication is unconditional and occurs prior to calling any
callback that is registered. For now, the callback is still fired in a separate
goroutine as before -- later, those callbacks should become subscriptions to
the published event.
For now, the event type is defined as a new type here in the package. We will
want to move it to a more central package when there are subscribers. The event
wrapper is effectively a subset of the data exported by the internal mapping
interface, but on a concrete struct so the bus plumbing can inspect it.
Updates #15160
Change-Id: I951f212429ac791223af8d75b6eb39a0d2a0053a
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
In preparation for adding more parameters (and later, moving some away), rework
the portmapper constructor to accept its arguments on a Config struct rather
than positionally.
This is a breaking change to the function signature, but one that is very easy
to update, and a search of GitHub reveals only six instances of usage outside
clones and forks of Tailscale itself, that are not direct copies of the code
fixed up here.
While we could stub in another constructor, I think it is safe to let those
folks do the update in-place, since their usage is already affected by other
changes we can't test for anyway.
Updates #15160
Change-Id: I9f8a5e12b38885074c98894b7376039261b43f43
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Android >=14 forbids the use of netlink sockets, and in some configurations
can kill apps that try.
Fixes#9836
Signed-off-by: David Anderson <dave@tailscale.com>
Otherwise this was repeated closing control/derp connections all the time
on netmon changes. Arguably we should do this on all platforms?
Updates #5794
Change-Id: If6bbeff554235f188bab2a40ab75e08dd14746b2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This commit implements an experimental UDP relay server. The UDP relay
server leverages the Disco protocol for a 3-way handshake between
client and server, along with 3 new Disco message types for said
handshake. These new Disco message types are also considered
experimental, and are not yet tied to a capver.
The server expects, and imposes, a Geneve (Generic Network
Virtualization Encapsulation) header immediately following the underlay
UDP header. Geneve protocol field values have been defined for Disco
and WireGuard. The Geneve control bit must be set for the handshake
between client and server, and unset for messages relayed between
clients through the server.
Updates tailscale/corp#27101
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Otherwise you can get stuck finding minor ones nonstop.
Fixes#15484
Change-Id: I7f98ac338c0b32ec1b9fdc47d053207b5fc1bf23
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It only affected js/wasm and tamago.
Updates tailscale/corp#24697
Change-Id: I8fd29323ed9b663fe3fd8d4a86f26ff584a3e134
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Currently nobody calls SetTailscaleInterfaceName yet, so this is a
no-op. I checked oss, android, and the macOS/iOS client. Nobody calls
this, or ever did.
But I want to in the future.
Updates #15408
Updates #9040
Change-Id: I05dfabe505174f9067b929e91c6e0d8bc42628d7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
updates tailscale/corp#27145
We require a means to trigger a recompilation of the DNS configuration
to pick up new nameservers for platforms where we blend the interface
nameservers from the OS into our DNS config.
Notably, on Darwin, the only API we have at our disposal will, in rare instances,
return a transient error when querying the interface nameservers on a link change if
they have not been set when we get the AF_ROUTE messages for the link
update.
There's a corresponding change in corp for Darwin clients, to track
the interface namservers during NEPathMonitor events, and call this
when the nameservers change.
This will also fix the slightly more obscure bug of changing nameservers
while tailscaled is running. That change can now be reflected in
magicDNS without having to stop the client.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
This adds a new helper to the netmon package that allows us to
rate-limit log messages, so that they only print once per (major)
LinkChange event. We then use this when constructing the portmapper, so
that we don't keep spamming logs forever on the same network.
Updates #13145
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I6e7162509148abea674f96efd76be9dffb373ae4
We previously retried getting a UPnP mapping when the device returned
error code 725, "OnlyPermanentLeasesSupported". However, we've seen
devices in the wild also return 402, "Invalid Args", when given a lease
duration. Fall back to the no-duration mapping method in these cases.
Updates #15223
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I6a25007c9eeac0dac83750dd3ae9bfcc287c8fcf
For people who can't use LetsEncrypt because it's banned.
Per https://github.com/tailscale/tailscale/issues/11776#issuecomment-2520955317
This does two things:
1) if you run derper with --certmode=manual and --hostname=$IP_ADDRESS
we previously permitted, but now we also:
* auto-generate the self-signed cert for you if it doesn't yet exist on disk
* print out the derpmap configuration you need to use that
self-signed cert
2) teaches derp/derphttp's derp dialer to verify the signature of
self-signed TLS certs, if so declared in the existing
DERPNode.CertName field, which previously existed for domain fronting,
separating out the dial hostname from how certs are validates,
so it's not overloaded much; that's what it was meant for.
Fixes#11776
Change-Id: Ie72d12f209416bb7e8325fe0838cd2c66342c5cf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There's nothing about it on
https://github.com/multipath-tcp/mptcp_net-next/issues/ but empirically
MPTCP doesn't support this option on awly's kernel 6.13.2 and in GitHub
actions.
Updates #15015
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
We once again have a report of a panic from ParseRIB. This panic guard
should probably remain permanent.
Updates #14201
This reverts commit de9d4b2f886b6bf5cf0fe9be6c17d080267acef1.
Signed-off-by: James Tucker <james@tailscale.com>
Observed on some airlines (British Airways, WestJet), Squid is
configured to cache and transform these results, which is disruptive.
The server and client should both actively request that this is not done
by setting Cache-Control headers.
Send a timestamp parameter to further work against caches that do not
respect the cache-control headers.
Updates #14856
Signed-off-by: James Tucker <james@tailscale.com>
We had the debug packet capture code + Lua dissector in the CLI + the
iOS app. Now we don't, with tests to lock it in.
As a bonus, tailscale.com/net/packet and tailscale.com/net/flowtrack
no longer appear in the CLI's binary either.
A new build tag ts_omit_capture disables the packet capture code and
was added to build_dist.sh's --extra-small mode.
Updates #12614
Change-Id: I79b0628c0d59911bd4d510c732284d97b0160f10
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Still behind the same ts_omit_tap build tag.
See #14738 for background on the pattern.
Updates #12614
Change-Id: I03fb3d2bf137111e727415bd8e713d8568156ecc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We previously baked in the LetsEncrypt x509 root CA for our tlsdial
package.
This moves that out into a new "bakedroots" package and is now also
shared by ipn/ipnlocal's cert validation code (validCertPEM) that
decides whether it's time to fetch a new cert.
Otherwise, a machine without LetsEncrypt roots locally in its system
roots is unable to use tailscale cert/serve and fetch certs.
Fixes#14690
Change-Id: Ic88b3bdaabe25d56b9ff07ada56a27e3f11d7159
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Since 5297bd2cff8ed03679, tstun.Wrapper has required its Start
method to be called for it to function. Failure to do so just
results in weird hangs and I've wasted too much time multiple
times now debugging. Hopefully this prevents more lost time.
Updates tailscale/corp#24454
Change-Id: I87f4539f7be7dc154627f8835a37a8db88c31be0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We have observed some clients with extremely large lists of IPv6
endpoints, in some cases from subnets where the machine also has the
zero address for a whole /48 with then arbitrary addresses additionally
assigned within that /48. It is in general unnecessary for reachability
to report all of these addresses, typically only one will be necessary
for reachability. We report two, to cover some other common cases such
as some styles of IPv6 private address rotations.
Updates tailscale/corp#25850
Signed-off-by: James Tucker <james@tailscale.com>
We build up maps of both the existing MagicDNS configuration in hosts
and the desired MagicDNS configuration, compare the two, and only
write out a new one if there are changes. The comparison doesn't need
to be perfect, as the occasional false-positive is fine, but this
should greatly reduce rewrites of the hosts file.
I also changed the hosts updating code to remove the CRLF/LF conversion
stuff, and use Fprintf instead of Frintln to let us write those inline.
Updates #14428
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
We still use josharian/native (hi @josharian!) via
netlink, but I also sent https://github.com/mdlayher/netlink/pull/220
Updates #8632
Change-Id: I2eedcb7facb36ec894aee7f152c8a1f56d7fc8ba
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
These erroneously blocked a recent PR, which I fixed by simply
re-running CI. But we might as well fix them anyway.
These are mostly `printf` to `print` and a couple of `!=` to `!Equal()`
Updates #cleanup
Signed-off-by: Will Norris <will@tailscale.com>
Importing the ~deprecated golang.org/x/exp/maps as "xmaps" to not
shadow the std "maps" was getting ugly.
And using slices.Collect on an iterator is verbose & allocates more.
So copy (x)maps.Keys+Values into our slicesx package instead.
Updates #cleanup
Updates #12912
Updates #14514 (pulled out of that change)
Change-Id: I5e68d12729934de93cf4a9cd87c367645f86123a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The go-httpstat package has a data race when used with connections that
are performing happy-eyeballs connection setups as we are in the DERP
client. There is a long-stale PR upstream to address this, however
revisiting the purpose of this code suggests we don't really need
httpstat here.
The code populates a latency table that may be used to compare to STUN
latency, which is a lightweight RTT check. Switching out the reported
timing here to simply the request HTTP request RTT avoids the
problematic package.
Fixestailscale/corp#25095
Signed-off-by: James Tucker <james@tailscale.com>
This provides an interface for a user to force a preferred DERP outcome
for all future netchecks that will take precedence unless the forced
region is unreachable.
The option does not persist and will be lost when the daemon restarts.
Updates tailscale/corp#18997
Updates tailscale/corp#24755
Signed-off-by: James Tucker <james@tailscale.com>
