Previously, we used a non-nil Location as an indicator that a peer is a Mullvad exit node.
However, this is not, or no longer, reliable, since regular exit nodes may also have a non-nil Location,
such as when traffic steering is enabled for a tailnet.
In this PR, we update the plaintext `tailscale status` output to omit only Mullvad exit nodes, rather than all
exit nodes with a non-nil Location. The JSON output remains unchanged and continues to include all peers.
Updates tailscale/corp#30614
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In #16625, I introduced a mechanism for sending the selected exit node
to Control via tailcfg.Hostinfo.ExitNodeID as part of the MapRequest.
@nickkhyl pointed out that LocalBackend.doSetHostinfoFilterServices
needs to be triggered in order to actually send this update. This
patch adds that command. It also prevents the client from sending
"auto:any" in that field, because that’s not a real exit node ID.
This patch also fills in some missing checks in TestConfigureExitNode.
Updates tailscale/corp#30536
Signed-off-by: Simon Law <sfllaw@tailscale.com>
Update nixpkgs-unstable to include newer golang
to satisfy go.mod requirement of 1.24.4
Update vendor hash to current.
Updates #15015
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
This commit adds a advertise subcommand for tailscale serve, that would declare the node
as a service proxy for a service. This command only adds the service to node's list of
advertised service, but doesn't modify the list of services currently advertised.
Fixestailscale/corp#28016
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
When a client selects a particular exit node, Control may use that as
a signal for deciding other routes.
This patch causes the client to report whenever the current exit node
changes, through tailcfg.Hostinfo.ExitNodeID. It relies on a properly
set ipn.Prefs.ExitNodeID, which should already be resolved by
`tailscale set`.
Updates tailscale/corp#30536
Signed-off-by: Simon Law <sfllaw@tailscale.com>
This commit reverts the key of Web field in ipn.ServiceConfig to use FQDN instead of service
name for the host part of HostPort. This change is because k8s operator already build base on
the assumption of the part being FQDN. We don't want to break the code with dependency.
Fixestailscale/corp#30695
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* Modifies the k8s-proxy to expose health check and metrics
endpoints on the Pod's IP.
* Moves cmd/containerboot/healthz.go and cmd/containerboot/metrics.go to
/kube to be shared with /k8s-proxy.
Updates #13358
Signed-off-by: David Bond <davidsbond93@gmail.com>
Updates k8s-proxy's config so its auth mode config matches that we set
in kube-apiserver ProxyGroups for consistency.
Updates #13358
Change-Id: I95e29cec6ded2dc7c6d2d03f968a25c822bc0e01
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
The Kubernetes API server proxy is getting the ability to serve on a
Tailscale Service instead of individual node names. Update the configure
kubeconfig sub-command to accept arguments that look like a Tailscale
Service. Note, we can't know for sure whether a peer is advertising a
Tailscale Service, we can only guess based on the ExtraRecords in the
netmap and that IP showing up in a peer's AllowedIPs.
Also adds an --http flag to allow targeting individual proxies that can
be adverting on http for their node name, and makes the command a bit
more forgiving on the range of inputs it accepts and how eager it is to
print the help text when the input is obviously wrong.
Updates #13358
Change-Id: Ica0509c6b2c707252a43d7c18b530ec1acf7508f
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
This commit modifies the kubernetes operator's `DNSConfig` resource
with the addition of a new field at `nameserver.service.clusterIP`.
This field allows users to specify a static in-cluster IP address of
the nameserver when deployed.
Fixes#14305
Signed-off-by: David Bond <davidsbond93@gmail.com>
This function is behind a sync.Once so we should only see errors at
startup. In particular the error from `open` is useful to diagnose why
TPM might not be accessible.
Updates #15830
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Adds a new reconciler for ProxyGroups of type kube-apiserver that will
provision a Tailscale Service for each replica to advertise. Adds two
new condition types to the ProxyGroup, TailscaleServiceValid and
TailscaleServiceConfigured, to post updates on the state of that
reconciler in a way that's consistent with the service-pg reconciler.
The created Tailscale Service name is configurable via a new ProxyGroup
field spec.kubeAPISserver.ServiceName, which expects a string of the
form "svc:<dns-label>".
Lots of supporting changes were needed to implement this in a way that's
consistent with other operator workflows, including:
* Pulled containerboot's ensureServicesUnadvertised and certManager into
kube/ libraries to be shared with k8s-proxy. Use those in k8s-proxy to
aid Service cert sharing between replicas and graceful Service shutdown.
* For certManager, add an initial wait to the cert loop to wait until
the domain appears in the devices's netmap to avoid a guaranteed error
on the first issue attempt when it's quick to start.
* Made several methods in ingress-for-pg.go and svc-for-pg.go into
functions to share with the new reconciler
* Added a Resource struct to the owner refs stored in Tailscale Service
annotations to be able to distinguish between Ingress- and ProxyGroup-
based Services that need cleaning up in the Tailscale API.
* Added a ListVIPServices method to the internal tailscale client to aid
cleaning up orphaned Services
* Support for reading config from a kube Secret, and partial support for
config reloading, to prevent us having to force Pod restarts when
config changes.
* Fixed up the zap logger so it's possible to set debug log level.
Updates #13358
Change-Id: Ia9607441157dd91fb9b6ecbc318eecbef446e116
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
This commit removes the advertise command for service. The advertising is now embedded into
serve command and unadvertising is moved to drain subcommand
Fixestailscale/corp#22954
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: add clear subcommand for serve services
This commit adds a clear subcommand for serve command, to remove all config for a passed service.
This is a short cut for user to remove services after they drain a service. As an indipendent command
it would avoid accidently remove a service on typo.
Updates tailscale/corp#22954
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* update regarding comments
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* log when clearing a non-existing service but not error
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
---------
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
The tpmrm0 is a kernel-managed version of tpm0 that multiplexes multiple
concurrent connections. The basic tpm0 can only be accessed by one
application at a time, which can be pretty unreliable.
Updates #15830
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
* cmd/tailscale/cli: add drain subCommand for serve
This commit adds the drain subcommand for serving services. After we merge advertise and serve service as one step,
we now need a way to unadvertise service and this is it.
Updates tailscale/corp#22954
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* move runServeDrain and some update regarding pr comments
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* some code structure change
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
---------
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
Make it possible to dump the eventbus graph as JSON or DOT to both debug
and document what is communicated via the bus.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
Package geo provides functionality to represent and process
geographical locations on a sphere. The main type, geo.Point,
represents a pair of latitude and longitude coordinates.
Updates tailscale/corp#29968
Signed-off-by: Simon Law <sfllaw@tailscale.com>
* cmd/tailscale/cli: Add service flag to serve command
This commit adds the service flag to serve command which allows serving a service and add the service
to the advertisedServices field in prefs (What advertise command does that will be removed later).
When adding proxies, TCP proxies and WEB proxies work the same way as normal serve, just under a
different DNSname. There is a services specific L3 serving mode called Tun, can be set via --tun flag.
Serving a service is always in --bg mode. If --bg is explicitly set t o false, an error message will
be sent out. The restriction on proxy target being localhost or 127.0.0.1 also applies to services.
When removing proxies, TCP proxies can be removed with type and port flag and off argument. Web proxies
can be removed with type, port, setPath flag and off argument. To align with normal serve, when setPath
is not set, all handler under the hostport will be removed. When flags are not set but off argument was
passed by user, it will be a noop. Removing all config for a service will be available later with a new
subcommand clear.
Updates tailscale/corp#22954
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: fix ai comments and fix a test
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: Add a test for addServiceToPrefs
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: fix comment
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* add dnsName in error message
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* change the cli input flag variable type
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* replace FindServiceConfig with map lookup
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* some code simplification and add asServiceName
This commit cotains code simplification for IsServingHTTPS, SetWebHandler, SetTCPForwarding
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* replace IsServiceName with tailcfg.AsServiceName
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* replace all assemble of host name for service with strings.Join
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: adjust parameter order and update output message
This commit updates the parameter order for IsTCPForwardingOnPort and SetWebHandler.
Also updated the message msgServiceIPNotAssigned to msgServiceWaitingApproval to adapt to
latest terminologies around services.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: flip bool condition
This commit fixes a previous bug added that throws error when serve funnel without service.
It should've been the opposite, which throws error when serve funnel with service.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: change parameter of IsTCPForwardingOnPort
This commit changes the dnsName string parameter for IsTCPForwardingOnPort to
svcName tailcfg.ServiceName. This change is made to reduce ambiguity when
a single service might have different dnsNames
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* ipn/ipnlocal: replace the key to webHandler for services
This commit changes the way we get the webhandler for vipServices. It used to use the host name
from request to find the webHandler, now everything targeting the vipService IP have the same
set of handlers. This commit also stores service:port instead of FQDN:port as the key in serviceConfig
for Web map.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: Updated use of service name.
This commit removes serviceName.IsEmpty and use direct comparison to instead. In legacy code, when an empty service
name needs to be passed, a new constant noService is passed. Removed redundant code for checking service name validity
and string method for serviceNameFlag.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: Update bgBoolFlag
This commit update field name, set and string method of bgBoolFlag to make code cleaner.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: remove isDefaultService output from srvTypeAndPortFromFlags
This commit removes the isDefaultService out put as it's no longer needed. Also deleted redundant code.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: remove unnessesary variable declare in messageForPort
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* replace bool output for AsServiceName with err
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: Replace DNSName with NoService if DNSname only used to identify service
This commit moves noService constant to tailcfg, updates AsServiceName to return tailcfg.NoService if the input
is not a valid service name. This commit also removes using the local DNSName as scvName parameter. When a function
is only using DNSName to identify if it's working with a service, the input in replaced with svcName and expect
caller to pass tailcfg.NoService if it's a local serve. This commit also replaces some use of Sprintf with
net.JoinHostPort for ipn.HostPort creation.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: Remove the returned error for AsServiceName
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* apply suggested code and comment
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* replace local dnsName in test with tailcfg.NoService
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* cmd/tailscale/cli: move noService back and use else where
The constant serves the purpose of provide readability for passing as a function parameter. It's
more meaningful comparing to a . It can just be an empty string in other places.
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
* ipn: Make WebHandlerExists and RemoveTCPForwarding accept svcName
This commit replaces two functions' string input with svcName input since they only use the dnsName to
identify service. Also did some minor cleanups
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
---------
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
With auto exit nodes enabled, the client picks exit nodes from the
ones advertised in the network map. Usually, it picks the one with the
highest priority score, but when the top spot is tied, it used to pick
randomly. Then, once it made a selection, it would strongly prefer to
stick with that exit node. It wouldn’t even consider another exit node
unless the client was shutdown or the exit node went offline. This is
to prevent flapping, where a client constantly chooses a different
random exit node.
The major problem with this algorithm is that new exit nodes don’t get
selected as often as they should. In fact, they wouldn’t even move
over if a higher scoring exit node appeared.
Let’s say that you have an exit node and it’s overloaded. So you spin
up a new exit node, right beside your existing one, in the hopes that
the traffic will be split across them. But since the client had this
strong affinity, they stick with the exit node they know and love.
Using rendezvous hashing, we can have different clients spread
their selections equally across their top scoring exit nodes. When an
exit node shuts down, its clients will spread themselves evenly to
their other equal options. When an exit node starts, a proportional
number of clients will migrate to their new best option.
Read more: https://en.wikipedia.org/wiki/Rendezvous_hashing
The trade-off is that starting up a new exit node may cause some
clients to move over, interrupting their existing network connections.
So this change is only enabled for tailnets with `traffic-steering`
enabled.
Updates tailscale/corp#29966
Fixes#16551
Signed-off-by: Simon Law <sfllaw@tailscale.com>
So that conn.PeerAwareEndpoint is always evaluated per-packet, rather
than at least once per packet batch.
Updates tailscale/corp#30042
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This is a follow-up to #15351, which fixed the test for Linux but not for
Darwin, which stores its "true" executable in /usr/bin instead of /bin.
Try both paths when not running on Windows.
In addition, disable CGo in the integration test build, which was causing the
linker to fail. These tests do not need CGo, and it appears we had some version
skew with the base image on the runners.
In addition, in error cases the recover step of the permissions check was
spuriously panicking and masking the "real" failure reason. Don't do that check
when a command was not produced.
Updates #15350
Change-Id: Icd91517f45c90f7554310ebf1c888cdfd109f43a
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
Socket read errors currently close the server, so we need to understand
when and why they occur.
Updates tailscale/corp#27502
Updates tailscale/corp#30118
Signed-off-by: Jordan Whited <jordan@tailscale.com>
@nickkyl added an peer.Online check to suggestExitNodeUsingDERP, so it
should also check when running suggestExitNodeUsingTrafficSteering.
Updates tailscale/corp#29966
Signed-off-by: Simon Law <sfllaw@tailscale.com>
Thanks to @nickkhyl for pointing out that NetMap.Peers doesn’t get
incremental updates since the last full NetMap update. Instead, he
recommends using ipn/ipnlocal.nodeBackend.AppendMatchingPeers.
Updates #cleanup
Signed-off-by: Simon Law <sfllaw@tailscale.com>
A trusted peer relay path is always better than an untrusted direct or
peer relay path.
Updates tailscale/corp#30412
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This package promises more performance, but was never used.
The intent of the package is somewhat moot as "encoding/json"
in Go 1.25 (while under GOEXPERIMENT=jsonv2) has been
completely re-implemented using "encoding/json/v2"
such that unmarshal is dramatically faster.
Updates #cleanup
Updates tailscale/corp#791
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
udpRelayEndpointReady used to write into the peerMap, which required
holding Conn.mu, but this changed in f9e7131.
Updates #cleanup
Signed-off-by: Jordan Whited <jordan@tailscale.com>
