When the operator enables metrics on a proxy, it uses the port 9001,
and in the near future it will start using 9002 for the debug endpoint
as well. Make sure we don't choose ports from a range that includes
9001 so that we never clash. Setting TS_SOCKS5_SERVER, TS_HEALTHCHECK_ADDR_PORT,
TS_OUTBOUND_HTTP_PROXY_LISTEN, and PORT could also open arbitrary ports,
so we will need to document that users should not choose ports from the
10000-20000 range for those settings.
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
https://go.dev/wiki/CodeReviewComments#useful-test-failures
(Previously it was using subtests with names including the input, but
once those went away, there was no context left)
Updates #14169
Change-Id: Ib217028183a3d001fe4aee58f2edb746b7b3aa88
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Otherwise we'll see a panic if we hit the dnsfallback code and try to
call NewDialer with a nil NetMon.
Updates #14161
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I81c6e72376599b341cb58c37134c2a948b97cf5f
So we can locate them in logs more easily.
Updates tailscale/corp#24721
Change-Id: Ia766c75608050dde7edc99835979a6e9bb328df2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Extracts tsaddr.IsTailscaleIPv4 out of tsaddr.IsTailscaleIP.
This will allow for checking valid Tailscale assigned IPv4 addresses
without checking IPv6 addresses.
Updates #14168
Updates tailscale/corp#24620
Signed-off-by: James Scott <jim@tailscale.com>
This is a follow-up to #14112 where our internal kube client was updated
to allow it to emit Events - this updates our sample kube manifests
and tsrecorder manifest templates so they can benefit from this functionality.
Updates tailscale/tailscale#14080
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Initial support for SrcCaps was added in 5ec01bf but it was not actually
working without this.
Updates #12542
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Adds functionality to kube client to emit Events.
Updates kube store to emit Events when tailscaled state has been loaded, updated or if any errors where
encountered during those operations.
This should help in cases where an error related to state loading/updating caused the Pod to crash in a loop-
unlike logs of the originally failed container instance, Events associated with the Pod will still be
accessible even after N restarts.
Updates tailscale/tailscale#14080
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
I merged 5cae7c51bf (removing Notify.BackendLogID) and 93db503565
(adding another reference to Notify.BackendLogID) that didn't have merge
conflicts, but didn't compile together.
This removes the new reference, fixing the build.
Updates #14129
Change-Id: I9bb68efd977342ea8822e525d656817235039a66
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Limit spamming GUIs with boring updates to once in 3 seconds, unless
the notification is relatively interesting and the GUI should update
immediately.
This is basically @barnstar's #14119 but with the logic moved to be
per-watch-session (since the bit is per session), rather than
globally. And this distinguishes notable Notify messages (such as
state changes) and makes them send immediately.
Updates tailscale/corp#24553
Change-Id: I79cac52cce85280ce351e65e76ea11e107b00b49
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The v2 endpoint supports HTTP/2 bidirectional streaming and acks for
received bytes. This is used to detect when a recorder disappears to
more quickly terminate the session.
Updates https://github.com/tailscale/corp/issues/24023
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
* ipn,tailcfg: add VIPService struct and c2n to fetch them from client
Updates tailscale/corp#22743, tailscale/corp#22955
Signed-off-by: Naman Sood <mail@nsood.in>
* more review fixes
Signed-off-by: Naman Sood <mail@nsood.in>
* don't mention PeerCapabilityServicesDestination since it's currently unused
Signed-off-by: Naman Sood <mail@nsood.in>
---------
Signed-off-by: Naman Sood <mail@nsood.in>
Back in the day this testcontrol package only spoke the
nacl-boxed-based control protocol, which used this.
Then we added ts2021, which didn't, but still sometimes used it.
Then we removed the old mode and didn't remove this parameter
in 2409661a0d.
Updates #11585
Change-Id: Ifd290bd7dbbb52b681b3599786437a15bc98b6a5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously we required the program to be running in a test or have
TS_CONTROL_IS_PLAINTEXT_HTTP before we disabled its https fallback
on "http" schema control URLs to localhost with ports.
But nobody accidentally does all three of "http", explicit port
number, localhost and doesn't mean it. And when they mean it, they're
testing a localhost dev control server (like I was) and don't want 443
getting involved.
As of the changes for #13597, this became more annoying in that we
were trying to use a port which wasn't even available.
Updates #13597
Change-Id: Icd00bca56043d2da58ab31de7aa05a3b269c490f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
https://portsmouthbrewery.com/shilling-scale/
Any scale that includes "wee heavy" is a scale worth including.
Updates #words
Change-Id: I85fd7a64cf22e14f686f1093a220cb59c43e46ba
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We currently annotate pods with a hash of the tailscaled config so that
we can trigger pod restarts whenever it changes. However, the hash
updates more frequently than is necessary causing more restarts than is
necessary. This commit removes two causes; scaling up/down and removing
the auth key after pods have initially authed to control. However, note
that pods will still restart on scale-up/down because of the updated set
of volumes mounted into each pod. Hopefully we can fix that in a planned
follow-up PR.
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
This gets close to all of the remaining ones.
Updates #12912
Change-Id: I9c672bbed2654a6c5cab31e0cbece6c107d8c6fa
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It doesn't need a Clone method, like a time.Time, etc.
And then, because Go 1.23+ uses unique.Handle internally for
the netip package types, we can remove those special cases.
Updates #14058 (pulled out from that PR)
Updates tailscale/corp#24485
Change-Id: Iac3548a9417ccda5987f98e0305745a6e178b375
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Perhaps I was too opimistic in #13323 thinking we won't need logs for
this. Let's log a summary of the response without logging specific
identifiers.
Updates tailscale/corp#24437
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Or unless the new "ts_debug_websockets" build tag is set.
Updates #1278
Change-Id: Ic4c4f81c1924250efd025b055585faec37a5491d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Otherwise all the clients only using control/controlhttp for the
ts2021 HTTP client were also pulling in WebSocket libraries, as the
server side always needs to speak websockets, but only GOOS=js clients
speak it.
This doesn't yet totally remove the websocket dependency on Linux because
Linux has a envknob opt-in to act like GOOS=js for manual testing and force
the use of WebSockets for DERP only (not control). We can put that behind
a build tag in a future change to eliminate the dep on all GOOSes.
Updates #1278
Change-Id: I4f60508f4cad52bf8c8943c8851ecee506b7ebc9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Some environments would like to remove Tailscale SSH support for the
binary for various reasons when not needed (either for peace of mind,
or the ~1MB of binary space savings).
Updates tailscale/corp#24454
Updates #1278
Updates #12614
Change-Id: Iadd6c5a393992c254b5dc9aa9a526916f96fd07a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds a /disconnect-control local API endpoint that just shuts down control client.
This can be run before shutting down an HA subnet router/app connector replica - it will ensure
that all connection to control are dropped and control thus considers this node inactive and tells
peers to switch over to another replica. Meanwhile the existing connections keep working (assuming
that the replica is given some graceful shutdown period).
Updates tailscale/tailscale#14020
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Sets a custom hostinfo app type for ProxyGroup replicas, similarly
to how we do it for all other Kubernetes Operator managed components.
Updates tailscale/tailscale#13406,tailscale/corp#22920
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
- Basic description of DERP
If configured to do so, also show
- Mailto link to security@tailscale.com
- Link to Tailscale Security Policies
- Link to Tailscale Acceptable Use Policy
Updates tailscale/corp#24092
Signed-off-by: Percy Wegmann <percy@tailscale.com>
