Adds proxy to the localapi from /api/local/ web client endpoint.
The localapi proxy is restricted to an allowlist of those actually
used by the web client frontend.
Updates tailscale/corp#13775
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
We would call Update on the secret, but that was racey and would occasionaly
fail. Instead use patch whenever we can.
Fixes errors like
```
boot: 2023/08/29 01:03:53 failed to set serve config: sending serve config: updating config: writing ServeConfig to StateStore: Operation cannot be fulfilled on secrets "ts-webdav-kfrzv-0": the object has been modified; please apply your changes to the latest version and try again
{"level":"error","ts":"2023-08-29T01:03:48Z","msg":"Reconciler error","controller":"ingress","controllerGroup":"networking.k8s.io","controllerKind":"Ingress","Ingress":{"name":"webdav","namespace":"default"},"namespace":"default","name":"webdav","reconcileID":"96f5cfed-7782-4834-9b75-b0950fd563ed","error":"failed to provision: failed to create or get API key secret: Operation cannot be fulfilled on secrets \"ts-webdav-kfrzv-0\": the object has been modified; please apply your changes to the latest version and try again","stacktrace":"sigs.k8s.io/controller-runtime/pkg/internal/controller.(*Controller).reconcileHandler\n\tsigs.k8s.io/controller-runtime@v0.15.0/pkg/internal/controller/controller.go:324\nsigs.k8s.io/controller-runtime/pkg/internal/controller.(*Controller).processNextWorkItem\n\tsigs.k8s.io/controller-runtime@v0.15.0/pkg/internal/controller/controller.go:265\nsigs.k8s.io/controller-runtime/pkg/internal/controller.(*Controller).Start.func2.2\n\tsigs.k8s.io/controller-runtime@v0.15.0/pkg/internal/controller/controller.go:226"}
```
Updates #502
Updates #7895
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This removes a lot of API from net/interfaces (including all the
filter types, EqualFiltered, active Tailscale interface func, etc) and
moves the "major" change detection to net/netmon which knows more
about the world and the previous/new states.
Updates #9040
Change-Id: I7fe66a23039c6347ae5458745b709e7ebdcce245
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
De-pointer a *time.Time type, move it after the mutex which guard is,
rename two test-only methods with our conventional "ForTest" suffix.
Updates #cleanup
Change-Id: I4f4d1acd9c2de33d9c3cb6465d7349ed051aa9f9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Named result meant error paths assigned that variable to nil.
But a goroutine was concurrently using that variable.
Don't use a named result for that first parameter. Then then return
paths don't overwrite it.
Fixes#9129
Change-Id: Ie57f99d40ca8110085097780686d9bd620aaf160
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For now the method has only one interface (the same as the func it's
replacing) but it will grow, eventually with the goal to remove the
controlclient.Status type for most purposes.
Updates #1909
Change-Id: I715c8bf95e3f5943055a94e76af98d988558a2f2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I didn't see the race builder fail on CI earlier in 590c693b9.
This fixes the test.
Updates #greenci
Change-Id: I9f271bfadfc29b010226b55bf6647f35f03730b1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Printing out JSON representation things in log output is pretty common.
Updates #cleanup
Change-Id: Ife2d2e321a18e6e1185efa8b699a23061ac5e5a4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So even if the server doesn't support sending patches (neither the
Tailscale control server nor Headscale yet do), this makes the client
convert a changed node to its diff so the diffs can be processed
individually in a follow-up change.
This lets us make progress on #1909 without adding a dependency on
finishing the server-side part, and also means other control servers
will get the same upcoming optimizations.
And add some clientmetrics while here.
Updates #1909
Change-Id: I9533bcb8bba5227e17389f0b10dff71f33ee54ec
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Top-level Version in pkgs response is not always in sync with SPK
versions, especially on unstable track. It's very confusing when the
confirmation prompt asks you "update to 1.49.x?" and you end up updating
to 1.49.y.
Instead, grab the SPK-specific version field.
Updates #cleanup.
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Reimplement `downloadURLToFile` using `distsign.Download` and move all
of the progress reporting logic over there.
Updates #6995
Updates #755
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This was added in 3451b89e5f, but
resulted in the v6 Tailscale address being added to status when
when the forwarding only happened on the v4 address.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The new ingress reconcile raises events on failure, but I forgot to
add the updated permission.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This makes it more maintainable for other code to statically depend
on the exact value of this string. It also makes it easier to
identify what code might depend on this string by looking up
references to this constant.
Updates tailscale/corp#13777
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This uses the new react-based web client for all builds, not just with
the --dev flag.
If the web client assets have not been built, the client will serve a
message that Tailscale was built without the web client, and link to
build instructions. Because we will include the web client in all of our
builds, this should only be seen by developers or users building from
source. (And eventually this will be replaced by attempting to download
needed assets as runtime.)
We do now checkin the build/index.html file, which serves the error
message when assets are unavailable. This will also eventually be used
to trigger in CI when new assets should be built and uploaded to a
well-known location.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
Helper command to verify package signatures, mainly for debugging.
Also fix a copy-paste mistake in error message in distsign.
Updates #8760
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This option allows logging the raw HTTP requests and responses that the
portmapper Client makes when using UPnP. This can be extremely helpful
when debugging strange UPnP issues with users' devices, and might allow
us to avoid having to instruct users to perform a packet capture.
Updates #8992
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I2c3cf6930b09717028deaff31738484cc9b008e4
The previous change just switched the Go version used in the dev
environment (for use with e.g. direnv), not the version used for
the distribution build. Oops.
Updates #cleanup
Signed-off-by: David Anderson <danderson@tailscale.com>
On k8s the serve-config secret mount is symlinked so checking against
the Name makes us miss the events.
Updates #7895
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We pass the file as an io.Reader to http.Post under the hood as request
body. Post, helpfully, detects that the body is an io.Closer and closes
it. So when we try to explicitly close it again, we get "file already
closed" error.
The Close there is not load-bearing, we have a defer for it anyway.
Remove the explicit close and error check.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Also uses `http.HandlerFunc` to pass the handler into `csrfProtect`
so we can get rid of the extraneous `api` struct.
Updates tailscale/corp#13775
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Fly apps all set X-Forwarded-For, which breaks debug access even
with a preshared key otherwise.
Updates tailscale/corp#3601
Signed-off-by: David Anderson <danderson@tailscale.com>
It's very common for OOM crashes on Windows to be caused by lack of page
file space (the NT kernel does not overcommit). Since Windows automatically
manages page file space by default, unless the machine is out of disk space,
this is typically caused by manual page file configurations that are too
small.
This patch obtains the current page file size, the amount of free page file
space, and also determines whether the page file is automatically or manually
managed.
Fixes#9090
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Previously, the operator would only monitor Services and create
a Tailscale StatefulSet which acted as a L3 proxy which proxied
traffic inbound to the Tailscale IP onto the services ClusterIP.
This extends that functionality to also monitor Ingress resources
where the `ingressClassName=tailscale` and similarly creates a
Tailscale StatefulSet, acting as a L7 proxy instead.
Users can override the desired hostname by setting:
```
- tls
hosts:
- "foo"
```
Hostnames specified under `rules` are ignored as we only create a single
host. This is emitted as an event for users to see.
Fixes#7895
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This watches the provided path for a JSON encoded ipn.ServeConfig.
Everytime the file changes, or the nodes FQDN changes it reapplies
the ServeConfig.
At boot time, it nils out any previous ServeConfig just like tsnet does.
As the ServeConfig requires pre-existing knowledge of the nodes FQDN to do
SNI matching, it introduces a special `${TS_CERT_DOMAIN}` value in the JSON
file which is replaced with the known CertDomain before it is applied.
Updates #502
Updates #7895
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Previously users would have to unexpose/expose the service in order to
change Hostname/TargetIP. This now applies those changes by causing a
StatefulSet rollout now that a61a9ab087 is in.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
1. Add TCP port forwarding.
For example: ./sniproxy -forwards=tcp/22/github.com
will forward SSH to github.
% ssh -i ~/.ssh/id_ecdsa.pem -T git@github.com
Hi GitHubUser! You've successfully authenticated, but GitHub does not
provide shell access.
% ssh -i ~/.ssh/id_ecdsa.pem -T git@100.65.x.y
Hi GitHubUser! You've successfully authenticated, but GitHub does not
provide shell access.
2. Additionally export clientmetrics as prometheus metrics for local
scraping over the tailnet: http://sniproxy-hostname:8080/debug/varz
Updates https://github.com/tailscale/tailscale/issues/1748
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
I'm not saying it works, but it compiles.
Updates #5794
Change-Id: I2f3c99732e67fe57a05edb25b758d083417f083e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adding a root key that signs the current signing key on
pkgs.tailscale.com. This key is here purely for development and should
be replaced before 1.50 release.
Updates #8760
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Adds a cached self node to the web client Server struct, which will
be used from the web client api to verify that request came from the
node's own machine (i.e. came from the web client frontend). We'll
be using when we switch the web client api over to acting as a proxy
to the localapi, to protect against DNS rebinding attacks.
Updates tailscale/corp#13775
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Add `dist.Signer` hook which can arbitrarily sign linux/synology
artifacts. Plumb it through in `cmd/dist` and remove existing tarball
signing key. Distsign signing will happen on a remote machine, not using
a local key.
Updates #755
Updates #8760
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Synology and QNAP both run the web client as a CGI script. The old web
client didn't care too much about requests paths, since there was only a
single GET and POST handler. The new client serves assets on different
paths, so now we need to care.
First, enforce that the CGI script is always accessed from its full
path, including a trailing slash (e.g. /cgi-bin/tailscale/index.cgi/).
Then, strip that prefix off before passing the request along to the main
serve handler. This allows for properly serving both static files and
the API handler in a CGI environment. Also add a CGIPath option to allow
other CGI environments to specify a custom path.
Finally, update vite and one "api/data" call to no longer assume that we
are always serving at the root path of "/".
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
Add separate server methods for synology and qnap, and enforce
authentication and authorization checks before calling into the actual
serving handlers. This allows us to remove all of the auth logic from
those handlers, since all requests will already be authenticated by that
point.
Also simplify the Synology token redirect handler by using fetch.
Remove the SynologyUser from nodeData, since it was never used in the
frontend anyway.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
This commit doesn't change any of the logic, but just organizes the code
a little to prepare for future changes.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
Previously we would not reapply changes to TS_HOSTNAME etc when
then the container restarted and TS_AUTH_ONCE was enabled.
This splits those into two steps login and set, allowing us to
only rerun the set step on restarts.
Updates #502
Signed-off-by: Maisem Ali <maisem@tailscale.com>
