Some environments would like to remove Tailscale SSH support for the
binary for various reasons when not needed (either for peace of mind,
or the ~1MB of binary space savings).
Updates tailscale/corp#24454
Updates #1278
Updates #12614
Change-Id: Iadd6c5a393992c254b5dc9aa9a526916f96fd07a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds a /disconnect-control local API endpoint that just shuts down control client.
This can be run before shutting down an HA subnet router/app connector replica - it will ensure
that all connection to control are dropped and control thus considers this node inactive and tells
peers to switch over to another replica. Meanwhile the existing connections keep working (assuming
that the replica is given some graceful shutdown period).
Updates tailscale/tailscale#14020
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Sets a custom hostinfo app type for ProxyGroup replicas, similarly
to how we do it for all other Kubernetes Operator managed components.
Updates tailscale/tailscale#13406,tailscale/corp#22920
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
- Basic description of DERP
If configured to do so, also show
- Mailto link to security@tailscale.com
- Link to Tailscale Security Policies
- Link to Tailscale Acceptable Use Policy
Updates tailscale/corp#24092
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This adds a new generic result type (motivated by golang/go#70084) to
try it out, and uses it in the new lineutil package (replacing the old
lineread package), changing that package to return iterators:
sometimes over []byte (when the input is all in memory), but sometimes
iterators over results of []byte, if errors might happen at runtime.
Updates #12912
Updates golang/go#70084
Change-Id: Iacdc1070e661b5fb163907b1e8b07ac7d51d3f83
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Thanks to @davidbuzz for raising the issue in #13973.
Fixes#8272Fixes#13973
Change-Id: Ic413e14d34c82df3c70a97e591b90316b0b4946b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Key changes:
- No mutex for every udp package: replace syncs.Map with regular map for udpTargetConns
- Use socksAddr as map key for better type safety
- Add test for multi udp target
Updates #7581
Change-Id: Ic3d384a9eab62dcbf267d7d6d268bf242cc8ed3c
Signed-off-by: VimT <me@vimt.me>
This commit addresses an issue with the SOCKS5 UDP relay functionality
when using the --tun=userspace-networking option. Previously, UDP packets
were not being correctly routed into the Tailscale network in this mode.
Key changes:
- Replace single UDP connection with a map of connections per target
- Use c.srv.dial for creating connections to ensure proper routing
Updates #7581
Change-Id: Iaaa66f9de6a3713218014cf3f498003a7cac9832
Signed-off-by: VimT <me@vimt.me>
A filesystem was plumbed into netstack in 993acf4475
but hasn't been used since 2d5d6f5403. Remove it.
Noticed while rebasing a Tailscale fork elsewhere.
Updates tailscale/corp#16827
Change-Id: Ib76deeda205ffe912b77a59b9d22853ebff42813
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We were only updating the ProfileManager and not going down
the EditPrefs path which meant the prefs weren't applied
till either the process restarted or some other pref changed.
This makes it so that we reconfigure everything correctly when
ReloadConfig is called.
Updates #13032
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Add an explicit case for exercising preferred DERP hysteresis around
the branch that compares latencies on a percentage basis.
Updates #cleanup
Signed-off-by: Jordan Whited <jordan@tailscale.com>
By counting "/" elements in the pattern we catch many scenarios, but not
the root-level handler. If either of the patterns is "/", compare the
pattern length to pick the right one.
Updates https://github.com/tailscale/corp/issues/8027
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
In this PR, we add the tailscale syspolicy command with two subcommands: list, which displays
policy settings, and reload, which forces a reload of those settings. We also update the LocalAPI
and LocalClient to facilitate these additions.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Make it possible to advertise app connector via a new conffile field.
Also bumps capver - conffile deserialization errors out if unknonw
fields are set, so we need to know which clients understand the new field.
Updates tailscale/tailscale#11113
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This required sharing the dropped packet metric between two packages
(tstun and magicsock), so I've moved its definition to util/usermetric.
Updates tailscale/corp#22075
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
The user-facing metrics are intended to track data transmitted at
the overlay network level.
Updates tailscale/corp#22075
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
In an environment with unstable latency, such as upstream bufferbloat,
there are cases where a full netcheck could drop the prior preferred
DERP (likely home DERP) from future netcheck probe plans. This will then
likely result in a home DERP having a missing sample on the next
incremental netcheck, ultimately resulting in a home DERP move.
This change does not fix our overall response to highly unstable
latency, but it is an incremental improvement to prevent single spurious
samples during a full netcheck from alone triggering a flapping
condition, as now the prior changes to include historical latency will
still provide the desired resistance, and the home DERP should not move
unless latency is consistently worse over a 5 minute period.
Note that there is a nomenclature and semantics issue remaining in the
difference between a report preferred DERP and a home DERP. A report
preferred DERP is aspirational, it is what will be picked as a home DERP
if a home DERP connection needs to be established. A nodes home DERP may
be different than a recent preferred DERP, in which case a lot of
netcheck logic is fallible. In future enhancements much of the DERP move
logic should move to consider the home DERP, rather than recent report
preferred DERP.
Updates #8603
Updates #13969
Signed-off-by: James Tucker <james@tailscale.com>
We make setting.Snapshot JSON-marshallable in preparation for returning it from the LocalAPI.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We add setting.RawValue, a new type that facilitates unmarshalling JSON numbers and arrays
as uint64 and []string (instead of float64 and []any) for policy setting values.
We then use it to make setting.RawItem JSON-marshallable and update the tests.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In this PR, we implement (but do not use yet, pending #13727 review) a syspolicy/source.Store
that reads policy settings from environment variables. It converts a CamelCase setting.Key,
such as AuthKey or ExitNodeID, to a SCREAMING_SNAKE_CASE, TS_-prefixed environment
variable name, such as TS_AUTH_KEY and TS_EXIT_NODE_ID. It then looks up the variable
and attempts to parse it according to the expected value type. If the environment variable
is not set, the policy setting is considered not configured in this store (the syspolicy package
will still read it from other sources). Similarly, if the environment variable has an invalid value
for the setting type, it won't be used (though the reported/logged error will differ).
Updates #13193
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Now when we have HA for egress proxies, it makes sense to support topology
spread constraints that would allow users to define more complex
topologies of how proxy Pods need to be deployed in relation with other
Pods/across regions etc.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This adds additional logging on DERP home changes to allow
better troubleshooting.
Updates tailscale/corp#18095
Signed-off-by: Tim Walters <tim@tailscale.com>
updates tailscale/corp#24197
tailmac run now supports the --share option which will allow you
to specify a directory on the host which can be mounted in the guest
using mount_virtiofs vmshare <path>.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
updates tailscale/corp#24197
Generation of the Host.app path was erroneous and tailmac run
would not work unless the pwd was tailmac/bin. Now you can
be able to invoke tailmac from anywhere.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
- `tailscale metrics print`: to show metric values in console
- `tailscale metrics write`: to write metrics to a file (with a tempfile
& rename dance, which is atomic on Unix).
Also, remove the `TS_DEBUG_USER_METRICS` envknob as we are getting
more confident in these metrics.
Updates tailscale/corp#22075
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Not confident this is the right way to expose this, so let's remote it
for now.
Updates tailscale/corp#22075
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
If the client cannot fetch a serial number, write a log message helping
the user understand what happened. Also, don't just return the error
immediately, since we still have a chance to collect network interface
addresses.
Updates #5902
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
trimpath can be inconvenient for IDEs and LSPs that do not always
correctly handle module relative paths, and can also contribute to
caching bugs taking effect. We rarely have a real need for trimpath of
test produced binaries, so avoiding it should be a net win.
Updates #2988
Signed-off-by: James Tucker <james@tailscale.com>
A simple implementation of latency and loss simulation, applied to
writes to the ethernet interface of the NIC. The latency implementation
could be optimized substantially later if necessary.
Updates #13355
Signed-off-by: James Tucker <james@tailscale.com>
During resolv.conf update, old 'search' lines are cleared but '\n' is not
deleted, leaving behind a new blank line on every update.
This adds 's' flag to regexp, so '\n' is included in the match and deleted when
old lines are cleared.
Also, insert missing `\n` when updated 'search' line is appended to resolv.conf.
Signed-off-by: Renato Aguiar <renato@renatoaguiar.net>
Preloading of state from kube Secret should not
error if the Secret does not exist.
Updates tailscale/tailscale#7671
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Cache state in memory on writes, read from memory
in reads.
kubestore was previously always reading state from a Secret.
This change should fix bugs caused by temporary loss of access
to kube API server and imporove overall performance
Fixes#7671
Updates tailscale/tailscale#12079,tailscale/tailscale#13900
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Maisem Ali <maisem@tailscale.com>
In this PR, we update the syspolicy package to utilize syspolicy/rsop under the hood,
and remove syspolicy.CachingHandler, syspolicy.windowsHandler and related code
which is no longer used.
We mark the syspolicy.Handler interface and RegisterHandler/SetHandlerForTest functions
as deprecated, but keep them temporarily until they are no longer used in other repos.
We also update the package to register setting definitions for all existing policy settings
and to register the Registry-based, Windows-specific policy stores when running on Windows.
Finally, we update existing internal and external tests to use the new API and add a few more
tests and benchmarks.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This allows us to print the time that a netcheck was run, which is
useful in debugging.
Updates #10972
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Id48d30d4eb6d5208efb2b1526a71d83fe7f9320b
