* cmd/k8s-operator: fix DNS reconciler for dual-stack clusters
This fixes a bug where DNS reconciler logic was always assuming
that no more than one EndpointSlice exists for a Service.
In fact, there can be multiple, for example, in dual-stack
clusters, but also in other cases this is valid (as per kube docs).
This PR:
- allows for multiple EndpointSlices
- picks out the ones for IPv4 family
- deduplicates addresses
Updates tailscale/tailscale#13056
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Tom Proctor <tomhjp@users.noreply.github.com>
Package setting contains types for defining and representing policy settings.
It facilitates the registration of setting definitions using Register and RegisterDefinition,
and the retrieval of registered setting definitions via Definitions and DefinitionOf.
This package is intended for use primarily within the syspolicy package hierarchy,
and added in a preparation for the next PRs.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This commit implements TCP GRO for packets being written to gVisor on
Linux. Windows support will follow later. The wireguard-go dependency is
updated in order to make use of newly exported IP checksum functions.
gVisor is updated in order to make use of newly exported
stack.PacketBuffer GRO logic.
TCP throughput towards gVisor, i.e. TUN write direction, is dramatically
improved as a result of this commit. Benchmarks show substantial
improvement, sometimes as high as 2x. High bandwidth-delay product
paths remain receive window limited, bottlenecked by gVisor's default
TCP receive socket buffer size. This will be addressed in a follow-on
commit.
The iperf3 results below demonstrate the effect of this commit between
two Linux computers with i5-12400 CPUs. There is roughly ~13us of round
trip latency between them.
The first result is from commit 57856fc without TCP GRO.
Starting Test: protocol: TCP, 1 streams, 131072 byte blocks
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 4.77 GBytes 4.10 Gbits/sec 20 sender
[ 5] 0.00-10.00 sec 4.77 GBytes 4.10 Gbits/sec receiver
The second result is from this commit with TCP GRO.
Starting Test: protocol: TCP, 1 streams, 131072 byte blocks
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 10.6 GBytes 9.14 Gbits/sec 20 sender
[ 5] 0.00-10.00 sec 10.6 GBytes 9.14 Gbits/sec receiver
Updates #6816
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This commit implements TCP GSO for packets being read from gVisor on
Linux. Windows support will follow later. The wireguard-go dependency is
updated in order to make use of newly exported GSO logic from its tun
package.
A new gVisor stack.LinkEndpoint implementation has been established
(linkEndpoint) that is loosely modeled after its predecessor
(channel.Endpoint). This new implementation supports GSO of monster TCP
segments up to 64K in size, whereas channel.Endpoint only supports up to
32K. linkEndpoint will also be required for GRO, which will be
implemented in a follow-on commit.
TCP throughput from gVisor, i.e. TUN read direction, is dramatically
improved as a result of this commit. Benchmarks show substantial
improvement through a wide range of RTT and loss conditions, sometimes
as high as 5x.
The iperf3 results below demonstrate the effect of this commit between
two Linux computers with i5-12400 CPUs. There is roughly ~13us of round
trip latency between them.
The first result is from commit 57856fc without TCP GSO.
Starting Test: protocol: TCP, 1 streams, 131072 byte blocks
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 2.51 GBytes 2.15 Gbits/sec 154 sender
[ 5] 0.00-10.00 sec 2.49 GBytes 2.14 Gbits/sec receiver
The second result is from this commit with TCP GSO.
Starting Test: protocol: TCP, 1 streams, 131072 byte blocks
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 12.6 GBytes 10.8 Gbits/sec 6 sender
[ 5] 0.00-10.00 sec 12.6 GBytes 10.8 Gbits/sec receiver
Updates #6816
Signed-off-by: Jordan Whited <jordan@tailscale.com>
cmd/k8s-operator,k8s-operator/sessionrecording,sessionrecording,ssh/tailssh: refactor session recording functionality
Refactor SSH session recording functionality (mostly the bits related to
Kubernetes API server proxy 'kubectl exec' session recording):
- move the session recording bits used by both Tailscale SSH
and the Kubernetes API server proxy into a shared sessionrecording package,
to avoid having the operator to import ssh/tailssh
- move the Kubernetes API server proxy session recording functionality
into a k8s-operator/sessionrecording package, add some abstractions
in preparation for adding support for a second streaming protocol (WebSockets)
Updates tailscale/corp#19821
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Re-instates the functionality that generates CRD API docs, but using
a different library as the one we were using earlier seemed to have
some issues with its Git history.
Also regenerates the docs (make kube-generate-all).
Updates tailscale/tailscale#12859
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Updates tailscale/tailscale#1634
This PR introduces a new `captive-portal-detected` Warnable which is set to an unhealthy state whenever a captive portal is detected on the local network, preventing Tailscale from connecting.
ipn/ipnlocal: fix captive portal loop shutdown
Change-Id: I7cafdbce68463a16260091bcec1741501a070c95
net/captivedetection: fix mutex misuse
ipn/ipnlocal: ensure that we don't fail to start the timer
Change-Id: I3e43fb19264d793e8707c5031c0898e48e3e7465
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Remove fybrik.io/crdoc dependency as it is causing issues for folks attempting
to vendor tailscale using GOPROXY=direct.
This means that the CRD API docs in ./k8s-operator/api.md will no longer
be generated- I am going to look at replacing it with another tool
in a follow-up.
Updates tailscale/tailscale#12859
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator,ssh/tailssh,tsnet: optionally record kubectl exec sessions
The Kubernetes operator's API server proxy, when it receives a request
for 'kubectl exec' session now reads 'RecorderAddrs', 'EnforceRecorder'
fields from tailcfg.KubernetesCapRule.
If 'RecorderAddrs' is set to one or more addresses (of a tsrecorder instance(s)),
it attempts to connect to those and sends the session contents
to the recorder before forwarding the request to the kube API
server. If connection cannot be established or fails midway,
it is only allowed if 'EnforceRecorder' is not true (fail open).
Updates tailscale/corp#19821
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Maisem Ali <maisem@tailscale.com>
cmd/containerboot,cmd/k8s-operator: enable IPv6 for fqdn egress proxies
Don't skip installing egress forwarding rules for IPv6 (as long as the host
supports IPv6), and set headless services `ipFamilyPolicy` to
`PreferDualStack` to optionally enable both IP families when possible. Note
that even with `PreferDualStack` set, testing a dual-stack GKE cluster with
the default DNS setup of kube-dns did not correctly set both A and
AAAA records for the headless service, and instead only did so when
switching the cluster DNS to Cloud DNS. For both IPv4 and IPv6 to work
simultaneously in a dual-stack cluster, we require headless services to
return both A and AAAA records.
If the host doesn't support IPv6 but the FQDN specified only has IPv6
addresses available, containerboot will exit with error code 1 and an
error message because there is no viable egress route.
Fixes#12215
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Adds a new TailscaleProxyReady condition type for use in corev1.Service
conditions.
Also switch our CRDs to use metav1.Condition instead of
ConnectorCondition. The Go structs are seralized identically, but it
updates some descriptions and validation rules. Update k8s
controller-tools and controller-runtime deps to fix the documentation
generation for metav1.Condition so that it excludes comments and
TODOs.
Stop expecting the fake client to populate TypeMeta in tests. See
kubernetes-sigs/controller-runtime#2633 for details of the change.
Finally, make some minor improvements to validation for service hostnames.
Fixes#12216
Co-authored-by: Irbe Krumina <irbe@tailscale.com>
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
* cmd/containerboot: store device ID before setting up proxy routes.
For containerboot instances whose state needs to be stored
in a Kubernetes Secret, we additonally store the device's
ID, FQDN and IPs.
This is used, between other, by the Kubernetes operator,
who uses the ID to delete the device when resources need
cleaning up and writes the FQDN and IPs on various kube
resource statuses for visibility.
This change shifts storing device ID earlier in the proxy setup flow,
to ensure that if proxy routing setup fails,
the device can still be deleted.
Updates tailscale/tailscale#12146
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* code review feedback
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
---------
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This PR is in prep of adding logic to control to be able to parse
tailscale.com/cap/kubernetes grants in control:
- moves the type definition of PeerCapabilityKubernetes cap to a location
shared with control.
- update the Kubernetes cap rule definition with fields for granting
kubectl exec session recording capabilities.
- adds a convenience function to produce tailcfg.RawMessage from an
arbitrary cap rule and a test for it.
An example grant defined via ACLs:
"grants": [{
"src": ["tag:eng"],
"dst": ["tag:k8s-operator"],
"app": {
"tailscale.com/cap/kubernetes": [{
"recorder": ["tag:my-recorder"]
“enforceRecorder”: true
}],
},
}
]
This grant enforces `kubectl exec` sessions from tailnet clients,
matching `tag:eng` via API server proxy matching `tag:k8s-operator`
to be recorded and recording to be sent to a tsrecorder instance,
matching `tag:my-recorder`.
The type needs to be shared with control because we want
control to parse this cap and resolve tags to peer IPs.
Updates tailscale/corp#19821
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Add a new .spec.tailscale.acceptRoutes field to ProxyClass,
that can be optionally set to true for the proxies to
accept routes advertized by other nodes on tailnet (equivalent of
setting --accept-routes to true).
Updates tailscale/tailscale#12322,tailscale/tailscale#10684
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Also removes hardcoded image repo/tag from example DNSConfig resource
as the operator now knows how to default those.
Updates tailscale/tailscale#11019
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Add new fields TailnetIPs and Hostname to Connector Status. These
contain the addresses of the Tailscale node that the operator created
for the Connector to aid debugging.
Fixes#12214
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
cmd/k8s-operator,k8s-operator,go.{mod,sum}: make individual proxy images/image pull policies configurable
Allow to configure images and image pull policies for individual proxies
via ProxyClass.Spec.StatefulSet.Pod.{TailscaleContainer,TailscaleInitContainer}.Image,
and ProxyClass.Spec.StatefulSet.Pod.{TailscaleContainer,TailscaleInitContainer}.ImagePullPolicy
fields.
Document that we have images in ghcr.io on the relevant Helm chart fields.
Updates tailscale/tailscale#11675
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This is done in preparation for adding kubectl
session recording rules to this capability grant that will need to
be unmarshalled by control, so will also need to be
in a shared location.
Updates tailscale/corp#19821
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator/deploy/chart: Support image 'repo' or 'repository' keys in helm values
Fixes#12100
Signed-off-by: Michael Long <michaelongdev@gmail.com>
Turn off stateful filtering for egress proxies to allow cluster
traffic to be forwarded to tailnet.
Allow configuring stateful filter via tailscaled config file.
Deprecate EXPERIMENTAL_TS_CONFIGFILE_PATH env var and introduce a new
TS_EXPERIMENTAL_VERSIONED_CONFIG env var that can be used to provide
containerboot a directory that should contain one or more
tailscaled config files named cap-<tailscaled-cap-version>.hujson.
Containerboot will pick the one with the newest capability version
that is not newer than its current capability version.
Proxies with this change will not work with older Tailscale
Kubernetes operator versions - users must ensure that
the deployed operator is at the same version or newer (up to
4 version skew) than the proxies.
Updates tailscale/tailscale#12061
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Maisem Ali <maisem@tailscale.com>
We are now publishing nameserver images to tailscale/k8s-nameserver,
so we can start defaulting the images if users haven't set
them explicitly, same as we already do with proxy images.
The nameserver images are currently only published for unstable
track, so we have to use the static 'unstable' tag.
Once we start publishing to stable, we can make the operator
default to its own tag (because then we'll know that for each
operator tag X there is also a nameserver tag X as we always
cut all images for a given tag.
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator: optionally update dnsrecords Configmap with DNS records for proxies.
This commit adds functionality to automatically populate
DNS records for the in-cluster ts.net nameserver
to allow cluster workloads to resolve MagicDNS names
associated with operator's proxies.
The records are created as follows:
* For tailscale Ingress proxies there will be
a record mapping the MagicDNS name of the Ingress
device and each proxy Pod's IP address.
* For cluster egress proxies, configured via
tailscale.com/tailnet-fqdn annotation, there will be
a record for each proxy Pod, mapping
the MagicDNS name of the exposed
tailnet workload to the proxy Pod's IP.
No records will be created for any other proxy types.
Records will only be created if users have configured
the operator to deploy an in-cluster ts.net nameserver
by applying tailscale.com/v1alpha1.DNSConfig.
It is user's responsibility to add the ts.net nameserver
as a stub nameserver for ts.net DNS names.
https://kubernetes.io/docs/tasks/administer-cluster/dns-custom-nameservers/#configuration-of-stub-domain-and-upstream-nameserver-using-corednshttps://cloud.google.com/kubernetes-engine/docs/how-to/kube-dns#upstream_nameservers
See also https://github.com/tailscale/tailscale/pull/11017
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator/deploy/chart: allow users to configure additional labels for the operator's Pod via Helm chart values.
Fixes#11947
Signed-off-by: Gabe Gorelick <gabe@hightouch.io>
* cmd/k8s-nameserver,k8s-operator: add a nameserver that can resolve ts.net DNS names in cluster.
Adds a simple nameserver that can respond to A record queries for ts.net DNS names.
It can respond to queries from in-memory records, populated from a ConfigMap
mounted at /config. It dynamically updates its records as the ConfigMap
contents changes.
It will respond with NXDOMAIN to queries for any other record types
(AAAA to be implemented in the future).
It can respond to queries over UDP or TCP. It runs a miekg/dns
DNS server with a single registered handler for ts.net domain names.
Queries for other domain names will be refused.
The intended use of this is:
1) to allow non-tailnet cluster workloads to talk to HTTPS tailnet
services exposed via Tailscale operator egress over HTTPS
2) to allow non-tailnet cluster workloads to talk to workloads in
the same cluster that have been exposed to tailnet over their
MagicDNS names but on their cluster IPs.
DNSConfig CRD can be used to configure
the operator to deploy kube nameserver (./cmd/k8s-nameserver) to cluster.
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Before attempting to enable IPv6 forwarding in the proxy init container
check if the relevant module is found, else the container crashes
on hosts that don't have it.
Updates#11860
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Adds a new .spec.metrics field to ProxyClass to allow users to optionally serve
client metrics (tailscaled --debug) on <Pod-IP>:9001.
Metrics cannot currently be enabled for proxies that egress traffic to tailnet
and for Ingress proxies with tailscale.com/experimental-forward-cluster-traffic-via-ingress annotation
(because they currently forward all cluster traffic to their respective backends).
The assumption is that users will want to have these metrics enabled
continuously to be able to monitor proxy behaviour (as opposed to enabling
them temporarily for debugging). Hence we expose them on Pod IP to make it
easier to consume them i.e via Prometheus PodMonitor.
Updates tailscale/tailscale#11292
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/containerboot,util/linuxfw: support proxy backends specified by DNS name
Adds support for optionally configuring containerboot to proxy
traffic to backends configured by passing TS_EXPERIMENTAL_DEST_DNS_NAME env var
to containerboot.
Containerboot will periodically (every 10 minutes) attempt to resolve
the DNS name and ensure that all traffic sent to the node's
tailnet IP gets forwarded to the resolved backend IP addresses.
Currently:
- if the firewall mode is iptables, traffic will be load balanced
accross the backend IP addresses using round robin. There are
no health checks for whether the IPs are reachable.
- if the firewall mode is nftables traffic will only be forwarded
to the first IP address in the list. This is to be improved.
* cmd/k8s-operator: support ExternalName Services
Adds support for exposing endpoints, accessible from within
a cluster to the tailnet via DNS names using ExternalName Services.
This can be done by annotating the ExternalName Service with
tailscale.com/expose: "true" annotation.
The operator will deploy a proxy configured to route tailnet
traffic to the backend IPs that service.spec.externalName
resolves to. The backend IPs must be reachable from the operator's
namespace.
Updates tailscale/tailscale#10606
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Kubernetes cluster domain defaults to 'cluster.local', but can also be customized.
We need to determine cluster domain to set up in-cluster forwarding to our egress proxies.
This was previously hardcoded to 'cluster.local', so was the egress proxies were not usable in clusters with custom domains.
This PR ensures that we attempt to determine the cluster domain by parsing /etc/resolv.conf.
In case the cluster domain cannot be determined from /etc/resolv.conf, we fall back to 'cluster.local'.
Updates tailscale/tailscale#10399,tailscale/tailscale#11445
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Adds new ProxyClass.spec.statefulSet.pod.{tailscaleContainer,tailscaleInitContainer}.Env field
that allow users to provide key, value pairs that will be set as env vars for the respective containers.
Allow overriding all containerboot env vars,
but warn that this is not supported and might break (in docs + a warning when validating ProxyClass).
Updates tailscale/tailscale#10709
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-nameserver,k8s-operator: add a nameserver that can resolve ts.net DNS names in cluster.
Adds a simple nameserver that can respond to A record queries for ts.net DNS names.
It can respond to queries from in-memory records, populated from a ConfigMap
mounted at /config. It dynamically updates its records as the ConfigMap
contents changes.
It will respond with NXDOMAIN to queries for any other record types
(AAAA to be implemented in the future).
It can respond to queries over UDP or TCP. It runs a miekg/dns
DNS server with a single registered handler for ts.net domain names.
Queries for other domain names will be refused.
The intended use of this is:
1) to allow non-tailnet cluster workloads to talk to HTTPS tailnet
services exposed via Tailscale operator egress over HTTPS
2) to allow non-tailnet cluster workloads to talk to workloads in
the same cluster that have been exposed to tailnet over their
MagicDNS names but on their cluster IPs.
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator/deploy/crds,k8s-operator: add DNSConfig CustomResource Definition
DNSConfig CRD can be used to configure
the operator to deploy kube nameserver (./cmd/k8s-nameserver) to cluster.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator,k8s-operator: optionally reconcile nameserver resources
Adds a new reconciler that reconciles DNSConfig resources.
If a DNSConfig is deployed to cluster,
the reconciler creates kube nameserver resources.
This reconciler is only responsible for creating
nameserver resources and not for populating nameserver's records.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/{k8s-operator,k8s-nameserver}: generate DNSConfig CRD for charts, append to static manifests
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
---------
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
