This was previously hooked around direct UDP path discovery /
CallMeMaybe transmission, and related conditions. Now it is subject to
relay-specific considerations.
Updates tailscale/corp#27502
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Previously, the operator checked the ProxyGroup status fields for
information on how many of the proxies had successfully authed. Use
their state Secrets instead as a more reliable source of truth.
containerboot has written device_fqdn and device_ips keys to the
state Secret since inception, and pod_uid since 1.78.0, so there's
no need to use the API for that data. Read it from the state Secret
for consistency. However, to ensure we don't read data from a
previous run of containerboot, make sure we reset containerboot's
state keys on startup.
One other knock-on effect of that is ProxyGroups can briefly be
marked not Ready while a Pod is restarting. Introduce a new
ProxyGroupAvailable condition to more accurately reflect
when downstream controllers can implement flows that rely on a
ProxyGroup having at least 1 proxy Pod running.
Fixes#16327
Change-Id: I026c18e9d23e87109a471a87b8e4fb6271716a66
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Relay handshakes may now occur multiple times over the lifetime of a
relay server endpoint. Handshake messages now include a handshake
generation, which is client specified, as a means to trigger safe
challenge reset server-side.
Relay servers continue to enforce challenge values as single use. They
will only send a given value once, in reply to the first arriving bind
message for a handshake generation.
VNI has been added to the handshake messages, and we expect the outer
Geneve header value to match the sealed value upon reception.
Remote peer disco pub key is now also included in handshake messages,
and it must match the receiver's expectation for the remote,
participating party.
Updates tailscale/corp#27502
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Add a new `--encrypt-state` flag to `cmd/tailscaled`. Based on that
flag, migrate the existing state file to/from encrypted format if
needed.
Updates #15830
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
GitHub used to recommend the tibdex/github-app-token GitHub Action
until they wrote their own actions/create-github-app-token.
This patch replaces the use of the third-party action with the
official one.
Updates #cleanup
Signed-off-by: Simon Law <sfllaw@tailscale.com>
go(1) repsects GOROOT if set, but tool/go / gocross-wrapper.sh are explicitly intending to use our toolchain. We don't need to set GOROOT, just unset it, and then go(1) handles the rest.
Updates tailscale/corp#26717
Signed-off-by: James Tucker <james@tailscale.com>
For any changes that involve DERP, automatically add the
@tailscale/dataplane team as a reviewer.
Updates #cleanup
Signed-off-by: Simon Law <sfllaw@tailscale.com>
Premature cancellation was preventing the work from ever being cleaned
up in runLoop().
Updates tailscale/corp#27502
Signed-off-by: Jordan Whited <jordan@tailscale.com>
SSH was disabled in #10538
Exit node was disabled in #13726
This enables ssh and exit-node options in case of Home Assistant.
Fixes#15552
Signed-off-by: Laszlo Magyar <lmagyar1973@gmail.com>
This commit adds a NOTES.txt to the operator helm chart that will be written to the
terminal upon successful installation of the operator.
It includes a small list of knowledgebase articles with possible next steps for
the actor that installed the operator to the cluster. It also provides possible
commands to use for explaining the custom resources.
Fixes#13427
Signed-off-by: David Bond <davidsbond93@gmail.com>
Instead of every module having to come up with a set of test methods for
the event bus, this handful of test helpers hides a lot of the needed
setup for the testing of the event bus.
The tests in portmapper is also ported over to the new helpers.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
20.04 is no longer supported.
This pulls in changes to the QDK package that were required to make build succeed on 24.04.
Updates https://github.com/tailscale/corp/issues/29849
Signed-off-by: Percy Wegmann <percy@tailscale.com>
After the switch to 24.04, unsigned packages did not build correctly (came out as only a few KBs).
Fixestailscale/tailscale-qpkg#148
Signed-off-by: Percy Wegmann <percy@tailscale.com>
If we acted as the allocator we are responsible for signaling it to the
remote peer in a CallMeMaybeVia message over DERP.
Updates tailscale/corp#27502
Signed-off-by: Jordan Whited <jordan@tailscale.com>
udprelay.Server is lazily initialized when the first request is received
over peerAPI. These early requests have a high chance of failure until
the first address discovery cycle has completed.
Return an ErrServerNotReady error until the first address discovery
cycle has completed, and plumb retry handling for this error all the
way back to the client in relayManager.
relayManager can now retry after a few seconds instead of waiting for
the next path discovery cycle, which could take another minute or
longer.
Updates tailscale/corp#27502
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Any return underneath this select case must belong to a type switch case.
Updates tailscale/corp#27502
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This tweaks the just-added ./tool/go.{cmd,ps1} port of ./tool/go for
Windows.
Otherwise in Windows Terminal in Powershell, running just ".\tool\go"
picks up go.ps1 before go.cmd, which means execution gets denied
without the cmd script's -ExecutionPolicy Bypass part letting it work.
This makes it work in both cmd.exe and in Powershell.
Updates tailscale/corp#28679
Change-Id: Iaf628a9fd6cb95670633b2dbdb635dfb8afaa006
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
go.cmd lets you run just "./tool/go" on Windows the same as Linux/Darwin.
The batch script (go.md) then just invokes PowerShell which is more
powerful than batch.
I wanted this while debugging Windows CI performance by reproducing slow
tests on my local Windows laptop.
Updates tailscale/corp#28679
Change-Id: I6e520968da3cef3032091c1c4f4237f663cefcab
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It's one of the slower ones, so split it up into chunks.
Updates tailscale/corp#28679
Change-Id: I16a5ba667678bf238c84417a51dda61baefbecf7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Proxies know how to reload configfile on changes since 1.80, which
is going to be the earliest supported proxy version with 1.84 operator,
so remove the mechanism that was updating configfile hash to force
proxy Pod restarts on config changes.
Updates #13032
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
I earlier thought this saved a second of CPU even on a fast machine,
but I think when I was previously measuring, I still had a 4096 bit
RSA key being generated in the code I was measuring.
Measuring again for this, it's plenty fast.
Prep for using this package more, for derp, etc.
Updates #16315
Change-Id: I4c9008efa9aa88a3d65409d6ffd7b3807f4d75e9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This reverts commit 6a93b17c8cafc1d8e1c52e133511e52ed9086355.
The reverted commit added more complexity than it was worth at the
current stage. Handling delta CapVer changes requires extensive changes
to relayManager datastructures in order to also support delta updates of
relay servers.
Updates tailscale/corp#27502
Signed-off-by: Jordan Whited <jordan@tailscale.com>
If you had HTTPS_PROXY=https://some-valid-cert.example.com running a
CONNECT proxy, we should've been able to do a TLS CONNECT request to
e.g. controlplane.tailscale.com:443 through that, and I'm pretty sure
it used to work, but refactorings and lack of integration tests made
it regress.
It probably regressed when we added the baked-in LetsEncrypt root cert
validation fallback code, which was testing against the wrong hostname
(the ultimate one, not the one which we were being asked to validate)
Fixes#16222
Change-Id: If014e395f830e2f87f056f588edacad5c15e91bc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Resolver.PreferGo didn't used to work on Windows.
It was fixed in 2022, though. (https://github.com/golang/go/issues/33097)
Updates #5161
Change-Id: I4e1aeff220ebd6adc8a14f781664fa6a2068b48c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This patch contains the following cleanups:
1. Simplify `ffcli.Command` definitions;
2. Word-wrap help text, consistent with other commands;
3. `tailscale dns --help` usage makes subcommand usage more obvious;
4. `tailscale dns query --help` describes DNS record types.
Updates #cleanup
Signed-off-by: Simon Law <sfllaw@tailscale.com>
