Remove the restriction that getent is skipped on non-Linux unixes.
Improve validation of the parsed output from getent, in case unknown
systems return unusable information.
Fixes#12730.
Signed-off-by: Ross Williams <ross@ross-williams.net>
The standard library includes these for strings and byte slices,
but it lacks similar functions for generic slices of comparable types.
Although they are not as commonly used, these functions are useful
in scenarios such as working with field index sequences (i.e., []int)
via reflection.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This adds support for container-like types such as Container[T] that
don't explicitly specify a view type for T. Instead, a package implementing
a container type should also implement and export a ContainerView[T, V] type
and a ContainerViewOf(*Container[T]) ContainerView[T, V] function, which
returns a view for the specified container, inferring the element view type V
from the element type T.
Updates #12736
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This adds support for generic types and interfaces to our cloner and viewer codegens.
It updates these packages to determine whether to make shallow or deep copies based
on the type parameter constraints. Additionally, if a template parameter or an interface
type has View() and Clone() methods, we'll use them for getters and the cloner of the
owning structure.
Updates #12736
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This adds a package with GP-related functions and types to be used in the future PRs.
It also updates nrptRuleDatabase to use the new package instead of its own gpNotificationWatcher implementation.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
cmd/containerboot,cmd/k8s-operator: enable IPv6 for fqdn egress proxies
Don't skip installing egress forwarding rules for IPv6 (as long as the host
supports IPv6), and set headless services `ipFamilyPolicy` to
`PreferDualStack` to optionally enable both IP families when possible. Note
that even with `PreferDualStack` set, testing a dual-stack GKE cluster with
the default DNS setup of kube-dns did not correctly set both A and
AAAA records for the headless service, and instead only did so when
switching the cluster DNS to Cloud DNS. For both IPv4 and IPv6 to work
simultaneously in a dual-stack cluster, we require headless services to
return both A and AAAA records.
If the host doesn't support IPv6 but the FQDN specified only has IPv6
addresses available, containerboot will exit with error code 1 and an
error message because there is no viable egress route.
Fixes#12215
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
We cannot directly pass a flat domain name into NetUserGetInfo; we must
resolve the address of a domain controller first.
This PR implements the appropriate resolution mechanisms to do that, and
also exposes a couple of new utility APIs for future needs.
Fixes#12627
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This PR ties together pseudoconsoles, user profiles, s4u logons, and
process creation into what is (hopefully) a simple API for various
Tailscale services to obtain Windows access tokens without requiring
knowledge of any Windows passwords. It works both for domain-joined
machines (Kerberos) and non-domain-joined machines. The former case
is fairly straightforward as it is fully documented. OTOH, the latter
case is not documented, though it is fully defined in the C headers in
the Windows SDK. The documentation blanks were filled in by reading
the source code of Microsoft's Win32 port of OpenSSH.
We need to do a bit of acrobatics to make conpty work correctly while
creating a child process with an s4u token; see the doc comments above
startProcessInternal for details.
Updates #12383
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Fix regression from bd93c3067e where I didn't notice the
32-bit test failure was real and not its usual slowness-related
regression. Yay failure blindness.
Updates #12526
Change-Id: I00e33bba697e2cdb61a0d76a71b62406f6c2eeb9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The control plane hasn't sent it to clients in ages.
Updates tailscale/corp#20965
Change-Id: I1d71a4b6dd3f75010a05c544ee39827837c30772
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I noticed we were allocating these every time when they could just
share the same memory. Rather than document ownership, just lock it
down with a view.
I was considering doing all of the fields but decided to just do this
one first as test to see how infectious it became. Conclusion: not
very.
Updates #cleanup (while working towards tailscale/corp#20514)
Change-Id: I8ce08519de0c9a53f20292adfbecd970fe362de0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fixestailscale/corp#18366.
This PR provides serial number collection on iOS, by allowing system administrators to pass a `DeviceSerialNumber` MDM key which can be read by the `posture` package in Go.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
S4U logons do not automatically load the associated user profile. In this
PR we add UserProfile to handle that part. Windows docs indicate that
we should try to resolve a remote profile path when present, so we attempt
to do so when the local computer is joined to a domain.
Updates #12383
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This is a variant of DoChan that supports context propagation, such that
the context provided to the inner function will only be canceled when
there are no more waiters for a given key. This can be used to
deduplicate expensive and cancelable calls among multiple callers
safely.
Updates #11935
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ibe1fb67442a854babbc6924fd8437b02cc9e7bcf
AllocateContiguousBuffer is for allocating structs with trailing buffers
containing additional data. It is to be used for various Windows structures
containing pointers to data located immediately after the struct.
SetNTString performs in-place setting of windows.NTString and
windows.NTUnicodeString.
Updates #12383
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
StartupInfoBuilder is a helper for constructing StartupInfoEx structures
featuring proc/thread attribute lists. Calling its setters triggers the
appropriate setting of fields, adjusting flags as necessary, and populating
the proc/thread attribute list as necessary. Currently it supports four
features: setting std handles, setting pseudo-consoles, specifying handles
for inheritance, and specifying jobs.
The conpty package simplifies creation of pseudo-consoles, their associated
pipes, and assignment of the pty to StartupInfoEx proc/thread attributes.
Updates #12383
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This can be used to implement a persistent pool (i.e. one that isn't
cleared like sync.Pool is) of items–e.g. database connections.
Some benchmarks vs. a naive implementation that uses a single map
iteration show a pretty meaningful improvement:
$ benchstat -col /impl ./bench.txt
goos: darwin
goarch: arm64
pkg: tailscale.com/util/pool
│ Pool │ map │
│ sec/op │ sec/op vs base │
Pool_AddDelete-10 10.56n ± 2% 15.11n ± 1% +42.97% (p=0.000 n=10)
Pool_TakeRandom-10 56.75n ± 4% 1899.50n ± 20% +3246.84% (p=0.000 n=10)
geomean 24.49n 169.4n +591.74%
Updates tailscale/corp#19900
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ie509cb65573c4726cfc3da9a97093e61c216ca18
* util/linuxfw: fix IPv6 NAT availability check for nftables
When running firewall in nftables mode,
there is no need for a separate NAT availability check
(unlike with iptables, there are no hosts that support nftables, but not IPv6 NAT - see tailscale/tailscale#11353).
This change fixes a firewall NAT availability check that was using the no-longer set ipv6NATAvailable field
by removing the field and using a method that, for nftables, just checks that IPv6 is available.
Updates tailscale/tailscale#12008
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
set.Of(1, 2, 3) is prettier than set.SetOf([]int{1, 2, 3}).
I was going to change the signature of SetOf but then I noticed its
name has stutter anyway, so I kept it for compatibility. People can
prefer to use set.Of for new code or slowly migrate.
Also add a lazy Make method, which I often find myself wanting,
without having to resort to uglier mak.Set(&set, k, struct{}{}).
Updates #cleanup
Change-Id: Ic6f3870115334efcbd65e79c437de2ad3edb7625
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We had this in a different repo, but moving it here, as this a more
fitting package.
Updates #cleanup
Change-Id: I5fb9b10e465932aeef5841c67deba4d77d473d57
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fixestailscale/corp#19459
This PR adds the ability for users of the syspolicy handler to read string arrays from the MDM solution configured on the system.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
This PR bumps iptables to a newer version that has a function to detect
'NotExists' errors and uses that function to determine whether errors
received on iptables rule and chain clean up are because the rule/chain
does not exist- if so don't log the error.
Updates corp#19336
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/containerboot,util/linuxfw: support proxy backends specified by DNS name
Adds support for optionally configuring containerboot to proxy
traffic to backends configured by passing TS_EXPERIMENTAL_DEST_DNS_NAME env var
to containerboot.
Containerboot will periodically (every 10 minutes) attempt to resolve
the DNS name and ensure that all traffic sent to the node's
tailnet IP gets forwarded to the resolved backend IP addresses.
Currently:
- if the firewall mode is iptables, traffic will be load balanced
accross the backend IP addresses using round robin. There are
no health checks for whether the IPs are reachable.
- if the firewall mode is nftables traffic will only be forwarded
to the first IP address in the list. This is to be improved.
* cmd/k8s-operator: support ExternalName Services
Adds support for exposing endpoints, accessible from within
a cluster to the tailnet via DNS names using ExternalName Services.
This can be done by annotating the ExternalName Service with
tailscale.com/expose: "true" annotation.
The operator will deploy a proxy configured to route tailnet
traffic to the backend IPs that service.spec.externalName
resolves to. The backend IPs must be reachable from the operator's
namespace.
Updates tailscale/tailscale#10606
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Since the tailscaled binaries that we distribute are static and don't
link cgo, we previously wouldn't fetch group IDs that are returned via
NSS. Try shelling out to the 'id' command, similar to how we call
'getent', to detect such cases.
Updates #11682
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I9bdc938bd76c71bc130d44a97cc2233064d64799
There is an undocumented 16KiB limit for text log messages.
However, the limit for JSON messages is 256KiB.
Even worse, logging JSON as text results in significant overhead
since each double quote needs to be escaped.
Instead, use logger.Logf.JSON to explicitly log the info as JSON.
We also modify osdiag to return the information as structured data
rather than implicitly have the package log on our behalf.
This gives more control to the caller on how to log.
Updates #7802
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This still generates github.com/google/uuid UUID objects, but does so
using a ChaCha8 CSPRNG from the stdlib rand/v2 package. The public API
is backed by a sync.Pool to provide good performance in highly
concurrent operation.
Under high load the read API produces a lot of extra garbage and
overhead by way of temporaries and syscalls. This implementation reduces
both to minimal levels, and avoids any long held global lock by
utilizing sync.Pool.
Updates tailscale/corp#18266
Updates tailscale/corp#19054
Signed-off-by: James Tucker <james@tailscale.com>
This removes a potentially increased boot delay for certain boot
topologies where they block on ExecStartPre that may have socket
activation dependencies on other system services (such as
systemd-resolved and NetworkManager).
Also rename cleanup to clean up in affected/immediately nearby places
per code review commentary.
Fixes#11599
Signed-off-by: James Tucker <james@tailscale.com>
Package winenv provides information about the current Windows environment.
This includes details such as whether the device is a server or workstation,
and if it is AD domain-joined, MDM-registered, or neither.
Updates tailscale/corp#18342
Signed-off-by: Nick Khyl <nickk@tailscale.com>
There are no mutations to the input,
so we can support both ~string and ~[]byte just fine.
Updates #cleanup
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Specifying a smaller window size during compression
provides a knob to tweak the tradeoff between memory usage
and the compression ratio.
Updates tailscale/corp#18514
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
MSS clamping for nftables was mostly not ran due to to an earlier rule in the FORWARD chain issuing accept verdict.
This commit places the clamping rule into a chain of its own to ensure that it gets ran.
Updates tailscale/tailscale#11002
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
We have hosts that support IPv6, but not IPv6 firewall configuration
in iptables mode.
We also have hosts that have some support for IPv6 firewall
configuration in iptables mode, but do not have iptables filter table.
We should:
- configure ip rules for all hosts that support IPv6
- only configure firewall rules in iptables mode if the host
has iptables filter table.
Updates tailscale/tailscale#11540
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
