This commit modifies the k8s proxy application configuration to include a
new field named `ServerURL` which, when set, modifies
the tailscale coordination server used by the proxy. This works in the same
way as the operator and the proxies it deploys.
If unset, the default coordination server is used.
Updates https://github.com/tailscale/tailscale/issues/13358
Signed-off-by: David Bond <davidsbond93@gmail.com>
This commit modifies the operator to detect the usage of k8s-apiserver
type proxy groups that wish to use the letsencrypt staging directory and
apply the appropriate environment variable to the statefulset it
produces.
Updates #13358
Signed-off-by: David Bond <davidsbond93@gmail.com>
Errors were mashalled without the correct newlines. Also, they could
generally be mashalled with more data, so an intermediate was introduced
to make them slightly nicer to look at.
Updates #15160
Signed-off-by: Claus Lensbøl <claus@tailscale.com>
If the NodeAttrDisableRelayClient node attribute is set, ensures that a node cannot allocate endpoints on a UDP relay server itself, and cannot use newly-discovered paths (via disco/CallMeMaybeVia) that traverse a UDP relay server.
Fixestailscale/corp#30180
Signed-off-by: Dylan Bargatze <dylan@tailscale.com>
If the GUI receives a new exit node ID before the new netmap, it may treat the node as offline or invalid
if the previous netmap didn't include the peer at all, or if the peer was offline or not advertised as an exit node.
This may result in briefly issuing and dismissing a warning, or a similar issue, which isn't ideal.
In this PR, we change the operation order to send the new netmap to clients first before selecting the new exit node
and notifying them of the Exit Node change.
Updates tailscale/corp#30252 (an old issue discovered during testing this)
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We already check this for cases where ipn.Prefs.AutoExitNode is configured via syspolicy.
Configuring it directly through EditPrefs should behave the same, so we add a test for that as well.
Additionally, we clarify the implementation and future extensibility in (*LocalBackend).resolveAutoExitNodeLocked,
where the AutoExitNode is actually enforced.
Updates tailscale/corp#29969
Updates #cleanup
Signed-off-by: Nick Khyl <nickk@tailscale.com>
If the specified exit node string starts with "auto:" (i.e., can be parsed as an ipn.ExitNodeExpression),
we update ipn.Prefs.AutoExitNode instead of ipn.Prefs.ExitNodeID.
Fixes#16459
Signed-off-by: Nick Khyl <nickk@tailscale.com>
So it can be used from the CLI without importing ipnlocal.
While there, also remove isAutoExitNodeID, a wrapper around parseAutoExitNodeID
that's no longer used.
Updates tailscale/corp#29969
Updates #cleanup
Signed-off-by: Nick Khyl <nickk@tailscale.com>
The observed generation was set to always 0 in #16429, but this had the
knock-on effect of other controllers considering ProxyGroups never ready
because the observed generation is never up to date in
proxyGroupCondition. Make sure the ProxyGroupAvailable function does not
requires the observed generation to be up to date, and add testing
coverage to catch regressions.
Updates #16327
Change-Id: I42f50ad47dd81cc2d3c3ce2cd7b252160bb58e40
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Adds a new k8s-proxy command to convert operator's in-process proxy to
a separately deployable type of ProxyGroup: kube-apiserver. k8s-proxy
reads in a new config file written by the operator, modelled on tailscaled's
conffile but with some modifications to ensure multiple versions of the
config can co-exist within a file. This should make it much easier to
support reading that config file from a Kube Secret with a stable file name.
To avoid needing to give the operator ClusterRole{,Binding} permissions,
the helm chart now optionally deploys a new static ServiceAccount for
the API Server proxy to use if in auth mode.
Proxies deployed by kube-apiserver ProxyGroups currently work the same as
the operator's in-process proxy. They do not yet leverage Tailscale Services
for presenting a single HA DNS name.
Updates #13358
Change-Id: Ib6ead69b2173c5e1929f3c13fb48a9a5362195d8
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Based on feedback that it wasn't clear what the user is meant to do with
the output of the last command, clarify that it's an optional command to
explore what got created.
Updates #13427
Change-Id: Iff64ec6d02dc04bf4bbebf415d7ed1a44e7dd658
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
When running `tailscale exit-node list`, an empty city or country name
should be displayed as a hyphen "-". However, this only happened when
there was no location at all. If a node provides a Hostinfo.Location,
then the list would display exactly what was provided.
This patch changes the listing so that empty cities and countries will
either render the provided name or "-".
Fixes#16500
Signed-off-by: Simon Law <sfllaw@tailscale.com>
When the policy setting is enabled, it allows users to override the exit node enforced by the ExitNodeID
or ExitNodeIP policy. It's primarily intended for use when ExitNodeID is set to auto:any, but it can also
be used with specific exit nodes. It does not allow disabling exit node usage entirely.
Once the exit node policy is overridden, it will not be enforced again until the policy changes,
the user connects or disconnects Tailscale, switches profiles, or disables the override.
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Now that applySysPolicy is only called by (*LocalBackend).reconcilePrefsLocked,
we can make it a method to avoid passing state via parameters and to support
future extensibility.
Also factor out exit node-specific logic into applyExitNodeSysPolicyLocked.
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Now that resolveExitNodeInPrefsLocked is the only caller of setExitNodeID,
and setExitNodeID is the only caller of resolveExitNodeIP, we can restructure
the code with resolveExitNodeInPrefsLocked now calling both
resolveAutoExitNodeLocked and resolveExitNodeIPLocked directly.
This prepares for factoring out resolveAutoExitNodeLocked and related
auto-exit-node logic into an ipnext extension in a future commit.
While there, we also update exit node by IP lookup to use (*nodeBackend).NodeByAddr
and (*nodeBackend).NodeByID instead of iterating over all peers in the most recent netmap.
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In this PR, we start passing a LocalAPI actor to (*LocalBackend).Logout to make it subject
to the same access check as disconnects made via tailscale down or the GUI.
We then update the CLI to allow `tailscale logout` to accept a reason, similar to `tailscale down`.
Updates tailscale/corp#26249
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Since a [*lazyEndpoint] makes wireguard-go responsible for peer ID, but
wireguard-go may not yet be configured for said peer, we need a JIT hook
around initiation message reception to call what is usually called from
an [*endpoint].
Updates tailscale/corp#30042
Signed-off-by: Jordan Whited <jordan@tailscale.com>
We can't relay a packet received over the IPv4 socket back out the same
socket if destined to an IPv6 address, and vice versa.
Updates tailscale/corp#30206
Signed-off-by: Jordan Whited <jordan@tailscale.com>
We extract checkEditPrefsAccessLocked, adjustEditPrefsLocked, and onEditPrefsLocked from the EditPrefs
execution path, defining when each step is performed and what behavior is allowed at each stage.
Currently, this is primarily used to support Always On mode, to handle the Exit Node enablement toggle,
and to report prefs edit metrics.
We then use it to enforce Exit Node policy settings by preventing users from setting an exit node
and making EditPrefs return an error when an exit node is restricted by policy. This enforcement is also
extended to the Exit Node toggle.
These changes prepare for supporting Exit Node overrides when permitted by policy and preventing logout
while Always On mode is enabled.
In the future, implementation of these methods can be delegated to ipnext extensions via the feature hooks.
Updates tailscale/corp#29969
Updates tailscale/corp#26249
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We have several places where we call applySysPolicy, suggestExitNodeLocked, and setExitNodeID.
While there are cases where we want to resolve the exit node specifically, such as when network
conditions change or a new netmap is received, we typically need to perform all three steps.
For example, enforcing policy settings may enable auto exit nodes or set an ExitNodeIP,
which in turn requires picking a suggested exit node or resolving the IP to an ID, respectively.
In this PR, we introduce (*LocalBackend).resolveExitNodeInPrefsLocked and (*LocalBackend).reconcilePrefsLocked,
with the latter calling both applySysPolicy and resolveExitNodeInPrefsLocked.
Consolidating these steps into a single extensibility point would also make it easier to support
future hooks registered by ipnext extensions.
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In this PR, we update setExitNodeID to retain the existing exit node if auto exit node is enabled,
the current exit node is allowed by policy, and no suggested exit node is available yet.
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Now that (*LocalBackend).suggestExitNodeLocked is never called with a non-current netmap
(the netMap parameter is always nil, indicating that the current netmap should be used),
we can remove the unused parameter.
Additionally, instead of suggestExitNodeLocked passing the most recent full netmap to suggestExitNode,
we now pass the current nodeBackend so it can access peers with delta updates applied.
Finally, with that fixed, we no longer need to skip TestUpdateNetmapDeltaAutoExitNode.
Updates tailscale/corp#29969
Fixes#16455
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In this PR, we add (*LocalBackend).RefreshExitNode which determines which exit node
to use based on the current prefs and netmap and switches to it if needed. It supports
both scenarios when an exit node is specified by IP (rather than ID) and needs to be resolved
once the netmap is ready as well as auto exit nodes.
We then use it in (*LocalBackend).SetControlClientStatus when the netmap changes,
and wherever (*LocalBackend).pickNewAutoExitNode was previously used.
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
TCP connections are two unidirectional data streams, and if one of these
streams closes, we should not assume the other half is closed as well.
For example, if an HTTP client closes its write half of the connection
early, it may still be expecting to receive data on its read half, so we
should keep the server -> client half of the connection open, while
terminating the client -> server half.
Fixestailscale/corp#29837.
Signed-off-by: Naman Sood <mail@nsood.in>
These were flipped. DstIP() and DstIPBytes() are used internally by
wireguard-go as part of a handshake DoS mitigation strategy.
Updates tailscale/corp#20732
Updates tailscale/corp#30042
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Just make [relayManager] always handle it, there's no benefit to
checking bestAddr's.
Also, remove passing of disco.Pong to [relayManager] in
endpoint.handlePongConnLocked(), which is redundant with the callsite in
Conn.handleDiscoMessage(). Conn.handleDiscoMessage() already passes to
[relayManager] if the txID us not known to any [*endpoint].
Updates tailscale/corp#27502
Signed-off-by: Jordan Whited <jordan@tailscale.com>
A lazyEndpoint may end up on this TX codepath when wireguard-go is
deemed "under load" and ends up transmitting a cookie reply using the
received conn.Endpoint.
Updates tailscale/corp#20732
Updates tailscale/corp#30042
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This commit modifies the k8s operator to allow for customisation of the ingress class name
via a new `OPERATOR_INGRESS_CLASS_NAME` environment variable. For backwards compatibility,
this defaults to `tailscale`.
When using helm, a new `ingress.name` value is provided that will set this environment variable
and modify the name of the deployed `IngressClass` resource.
Fixes https://github.com/tailscale/tailscale/issues/16248
Signed-off-by: David Bond <davidsbond93@gmail.com>
Refactors setting status into its own top-level function to make it
easier to ensure we _always_ set the status if it's changed on every
reconcile. Previously, it was possible to have stale status if some
earlier part of the provision logic failed.
Updates #16327
Change-Id: Idab0cfc15ae426cf6914a82f0d37a5cc7845236b
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Inverts the nodeAttrs related to UDP relay client/server enablement to disablement, and fixes up the corresponding logic that uses them. Also updates the doc comments on both nodeAttrs.
Fixestailscale/corp#30024
Signed-off-by: Dylan Bargatze <dylan@tailscale.com>
This commit modifies the operator helm chart values to bring the newly
added `loginServer` field to the top level. We felt as though it was a bit
confusing to be at the `operatorConfig` level as this value modifies the
behaviour or the operator, api server & all resources that the operator
manages.
Updates https://github.com/tailscale/corp/issues/29847
Signed-off-by: David Bond <davidsbond93@gmail.com>
With this change, policy enforcement and exit node resolution can happen in separate steps,
since enforcement no longer depends on resolving the suggested exit node. This keeps policy
enforcement synchronous (e.g., when switching profiles), while allowing exit node resolution
to be asynchronous on netmap updates, link changes, etc.
Additionally, the new preference will be used to let GUIs and CLIs switch back to "auto" mode
after a manual exit node override, which is necessary for tailscale/corp#29969.
Updates tailscale/corp#29969
Updates #16459
Signed-off-by: Nick Khyl <nickk@tailscale.com>
TestSetControlClientStatusAutoExitNode is broken similarly to TestUpdateNetmapDeltaAutoExitNode
as suggestExitNode didn't previously check the online status of exit nodes, and similarly to the other test
it succeeded because the test itself is also broken.
However, it is easier to fix as it sends out a full netmap update rather than a delta peer update,
so it doesn't depend on the same refactoring as TestSetControlClientStatusAutoExitNode.
Updates #16455
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
suggestExitNode never checks whether an exit node candidate is online.
It also accepts a full netmap, which doesn't include changes from delta updates.
The test can't work correctly until both issues are fixed.
Previously, it passed only because the test itself is flawed.
It doesn't succeed because the currently selected node goes offline and a new one is chosen.
Instead, it succeeds because lastSuggestedExitNode is incorrect, and suggestExitNode picks
the correct node the first time it runs, based on the DERP map and the netcheck report.
The node in exitNodeIDWant just happens to be the optimal choice.
Fixing SuggestExitNode requires refactoring its callers first, which in turn reveals the flawed test,
as suggestExitNode ends up being called slightly earlier.
In this PR, we update the test to correctly fail due to existing bugs in SuggestExitNode,
and temporarily skip it until those issues are addressed in a future commit.
Updates #16455
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
(*profileManager).CurrentPrefs() is always valid. Additionally, there's no value in cloning
and passing the full ipn.Prefs when editing preferences. Instead, ipn.MaskedPrefs should
only have ExitNodeID set.
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Currently, (*LocalBackend).pickNewAutoExitNode() is just a wrapper around
setAutoExitNodeIDLockedOnEntry that sends a prefs-change notification at the end.
It doesn't need to do that, since setPrefsLockedOnEntry already sends the notification
(setAutoExitNodeIDLockedOnEntry calls it via editPrefsLockedOnEntry).
This PR removes the old pickNewAutoExitNode function and renames
setAutoExitNodeIDLockedOnEntry to pickNewAutoExitNode for clarity.
Updates tailscale/corp#29969
Signed-off-by: Nick Khyl <nickk@tailscale.com>
When dialed with just an URL and no node, the recent proxy fixes caused
a regression where there was no TLS server name being included.
Updates #16222
Updates #16223
Signed-off-by: James Tucker <james@tailscale.com>
Co-Authored-by: Jordan Whited <jwhited@tailscale.com>
This commit modifies the kubernetes operator to allow for customisation of the tailscale
login url. This provides some data locality for people that want to configure it.
This value is set in the `loginServer` helm value and is propagated down to all resources
managed by the operator. The only exception to this is recorder nodes, where additional
changes are required to support modifying the url.
Updates https://github.com/tailscale/corp/issues/29847
Signed-off-by: David Bond <davidsbond93@gmail.com>
Cryptokey Routing identification is now required to set an [epAddr] into
the peerMap for Geneve-encapsulated [epAddr]s.
Updates tailscale/corp#27502
Updates tailscale/corp#29422
Updates tailscale/corp#30042
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Report whether the client is configured with state encryption (which
varies by platform and can be optional on some). Wire it up to
`--encrypt-state` in tailscaled, which is set for Linux/Windows, and set
defaults for other platforms. Macsys will also report this if full
Keychain migration is done.
Updates #15830
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
