For testing. Lee wants to play with 'AWS Global Accelerator Custom
Routing with Amazon Elastic Kubernetes Service'. If this works well
enough, we can promote it.
Updates #12578
Change-Id: I5018347ed46c15c9709910717d27305d0aedf8f4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The DERP Return Path Optimization (DRPO) is over four years old (and
on by default for over two) and we haven't had problems, so time to
remove the emergency shutoff code (controlknob) which we've never
used. The controlknobs are only meant for new features, to mitigate
risk. But we don't want to keep them forever, as they kinda pollute
the code.
Updates #150
Change-Id: If021bc8fd1b51006d8bddd1ffab639bb1abb0ad1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And fix up a bogus comment and flesh out some other comments.
Updates #cleanup
Change-Id: Ia60a1c04b0f5e44e8d9587914af819df8e8f442a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
cmd/containerboot,cmd/k8s-operator: enable IPv6 for fqdn egress proxies
Don't skip installing egress forwarding rules for IPv6 (as long as the host
supports IPv6), and set headless services `ipFamilyPolicy` to
`PreferDualStack` to optionally enable both IP families when possible. Note
that even with `PreferDualStack` set, testing a dual-stack GKE cluster with
the default DNS setup of kube-dns did not correctly set both A and
AAAA records for the headless service, and instead only did so when
switching the cluster DNS to Cloud DNS. For both IPv4 and IPv6 to work
simultaneously in a dual-stack cluster, we require headless services to
return both A and AAAA records.
If the host doesn't support IPv6 but the FQDN specified only has IPv6
addresses available, containerboot will exit with error code 1 and an
error message because there is no viable egress route.
Fixes#12215
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Updates tailscale/tailscale#4136
We should make sure to send the value of ImpactsConnectivity over to the clients using LocalAPI as they need it to display alerts in the GUI properly.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
This change expands the `exit-node list -filter` command to display all
location based exit nodes for the filtered country. This allows users
to switch to alternative servers when our recommended exit node is not
working as intended.
This change also makes the country filter matching case insensitive,
e.g. both USA and usa will work.
Updates #12698
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Updates tailscale/tailscale#4136
High severity health warning = a system notification will appear, which can be quite disruptive to the user and cause unnecessary concern in the event of a temporary network issue.
Per design decision (@sonovawolf), the severity of all warnings but "network is down" should be tuned down to medium/low. ImpactsConnectivity should be set, to change the icon to an exclamation mark in some cases, but without a notification bubble.
I also tweaked the messaging for update-available, to reflect how each platform gets updates in different ways.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Updates tailscale/corp#20677
The recover function wasn't getting set in the benchmark
tests. Default changed to an empty func.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
Fix regression from #8108 (Mar 2023). Since that change, gocross has
always been rebuilt on each run of ./tool/go (gocross-wrapper.sh),
adding ~100ms. (Well, not totally rebuilt; cmd/go's caching still
ends up working fine.)
The problem was $gocross_path was just "gocross", which isn't in my
path (and "." isn't in my $PATH, as it shouldn't be), so this line was
always evaluating to the empty string:
gotver="$($gocross_path gocross-version 2>/dev/null || echo '')"
The ./gocross is fine because of the earlier `cd "$repo_root"`
Updates tailscale/corp#21262
Updates tailscale/corp#21263
Change-Id: I80d25446097a3bb3423490c164352f0b569add5f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
go get github.com/tailscale/mkctr@main
Pulls in changes to support a local target that only pushes
a single-platform image to the machine's local image store.
Fixestailscale/mkctr#18
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
BPF links require that the owning FD remains open, this FD is embedded
into the RawLink returned by the attach function and must live for the
duration of the server.
Updates ENG-4274
Signed-off-by: James Tucker <james@tailscale.com>
Detection of duplicate Network Lock signature chains added in
01847e0123 failed to account for chains
originating with a SigCredential signature, which is used for wrapped
auth keys. This results in erroneous removal of signatures that
originate from the same re-usable auth key.
This change ensures that multiple nodes created by the same re-usable
auth key are not getting filtered out by the network lock.
Updates tailscale/corp#19764
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
This change moves handling of wrapped auth keys to the `tka` package and
adds a test covering auth key originating signatures (SigCredential) in
netmap.
Updates tailscale/corp#19764
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
When auto-udpates are enabled, we don't need to nag users to update
after a new release, before we release auto-updates.
Updates https://github.com/tailscale/corp/issues/20081
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This is not valid in many situations, specifically when running a local astro site that listens on localhost, but ignores 127.0.0.1
Fixes: https://github.com/tailscale/tailscale/issues/12201
Signed-off-by: Josh McKinney <joshka@users.noreply.github.com>
In hopes it'll be found more.
Updates tailscale/corp#20844
Change-Id: Ic92ee9908f45b88f8770de285f838333f9467465
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A few other minor language updates.
Updates tailscale/corp#20844
Change-Id: Idba85941baa0e2714688cc8a4ec3e242e7d1a362
Signed-off-by: James Tucker <james@tailscale.com>
And some misc doc tweaks for idiomatic Go style.
Updates #cleanup
Change-Id: I3ca45f78aaca037f433538b847fd6a9571a2d918
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We cannot directly pass a flat domain name into NetUserGetInfo; we must
resolve the address of a domain controller first.
This PR implements the appropriate resolution mechanisms to do that, and
also exposes a couple of new utility APIs for future needs.
Fixes#12627
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This turns the checklocks workflow into a real check, and adds
annotations to a few basic packages as a starting point.
Updates #12625
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I2b0185bae05a843b5257980fc6bde732b1bdd93f
The exit node suggestion CLI command was written with the assumption
that it's possible to provide a stableid on the command line, but this
is incorrect. Instead, it will now emit the name of the exit node.
Fixes#12618
Change-Id: Id7277f395b5fca090a99b0d13bfee7b215bc9802
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
The context can get canceled during backoff, and binding after that
makes the listener impossible to close afterwards.
Fixes#12620.
Signed-off-by: Naman Sood <mail@nsood.in>
To complement the existing `onCompletion` callback, which is called
after request handler.
Updates tailscale/corp#17075
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
We can observe a data race in tests when logging after a test is
finished. `b.onHealthChange` is called in a goroutine after being
registered with `health.Tracker.RegisterWatcher`, which calls callbacks
in `setUnhealthyLocked` in a new goroutine.
See: https://github.com/tailscale/tailscale/actions/runs/9672919302/job/26686038740
Updates #12054
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ibf22cc994965d88a9e7236544878d5373f91229e
This PR ties together pseudoconsoles, user profiles, s4u logons, and
process creation into what is (hopefully) a simple API for various
Tailscale services to obtain Windows access tokens without requiring
knowledge of any Windows passwords. It works both for domain-joined
machines (Kerberos) and non-domain-joined machines. The former case
is fairly straightforward as it is fully documented. OTOH, the latter
case is not documented, though it is fully defined in the C headers in
the Windows SDK. The documentation blanks were filled in by reading
the source code of Microsoft's Win32 port of OpenSSH.
We need to do a bit of acrobatics to make conpty work correctly while
creating a child process with an s4u token; see the doc comments above
startProcessInternal for details.
Updates #12383
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Previously, if we had a umask set (e.g. 0027) that prevented creating a
world-readable file, /etc/resolv.conf would be created without the o+r
bit and thus other users may be unable to resolve DNS.
Since a umask only applies to file creation, chmod the file after
creation and before renaming it to ensure that it has the appropriate
permissions.
Updates #12609
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I2a05d64f4f3a8ee8683a70be17a7da0e70933137
The logic we added in #11378 would prevent selecting a home DERP if we
have no control connection.
Updates tailscale/corp#18095
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I44bb6ac4393989444e4961b8cfa27dc149a33c6e
