In theory, some of the other table-driven tests could be moved into this
form now but I didn't want to disturb too much good test code.
Includes a commented-out test for #2384 that is currently failing.
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
This adapts the existing in-process logcatcher from tstest/integration
into a public type and uses it on the side of testcontrol. This also
fixes a bug in the Alpine Linux OpenRC unit that makes every value in
`/etc/default/tailscaled` exported into tailscaled's environment, a-la
systemd [Service].EnviromentFile.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
After allowing for custom DERP maps, it's convenient to be able to see their latency in
netcheck. This adds a query to the local tailscaled for the current DERPMap.
Updates #1264
Signed-off-by: julianknodt <julianknodt@gmail.com>
Move derpmap.Prod to a static JSON file (go:generate'd) instead,
to make its role explicit. And add a TODO about making dnsfallback
use an update-over-time DERP map file instead of a baked-in one.
Updates #1264
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a flag to the DERP server which specifies to verify clients through a local
tailscaled. It is opt-in, so should not affect existing clients, and is mainly intended for
users who want to run their own DERP servers. It assumes there is a local tailscaled running and
will attempt to hit it for peer status information.
Updates #1264
Signed-off-by: julianknodt <julianknodt@gmail.com>
In order to clone DERPMaps, it was necessary to extend the cloner so that it supports
nested pointers inside of maps which are also cloneable. This also adds cloning for DERPRegions
and DERPNodes because they are on DERPMap's maps.
Signed-off-by: julianknodt <julianknodt@gmail.com>
The only connectivity an AWS Lambda container has is an IPv4 link-local
169.254.x.x address using NAT:
12: vtarget_1@if11: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
qdisc noqueue state UP group default qlen 1000
link/ether 7e:1c:3f:00:00:00 brd ff:ff:ff:ff:ff:ff link-netnsid 1
inet 169.254.79.1/32 scope global vtarget_1
valid_lft forever preferred_lft forever
If there are no other IPv4/v6 addresses available, and we are running
in AWS Lambda, allow IPv4 169.254.x.x addresses to be used.
----
Similarly, a Google Cloud Run container's only connectivity is
a Unique Local Address fddf:3978:feb1:d745::c001/128.
If there are no other addresses available then allow IPv6
Unique Local Addresses to be used.
We actually did this in an earlier release, but now refactor it to
work the same way as the IPv4 link-local support is being done.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
This adds a handler on the DERP server for logging bytes send and received by clients of the
server, by holding open a connection and recording if there is a difference between the number
of bytes sent and received. It sends a JSON marshalled object if there is an increase in the
number of bytes.
Signed-off-by: julianknodt <julianknodt@gmail.com>
The dependency is a "soft" ordering dependency only, meaning that
tailscaled will start after those services if those services were
going to be run anyway, but doesn't force either of them to run.
That's why it's safe to specify this dependency unconditionally,
even for systems that don't run those services.
Updates #2127.
Signed-off-by: David Anderson <danderson@tailscale.com>
Alpine Linux[1] is a minimal Linux distribution built around musl libc.
It boots very quickly, requires very little ram and is as close as you
can get to an ideal citizen for testing Tailscale on musl. Alpine has a
Tailscale package already[2], but this patch also makes it easier for us
to provide an Alpine Linux package off of pkgs in the future.
Alpine only offers Tailscale on the rolling-release edge branch.
[1]: https://alpinelinux.org/
[2]: https://pkgs.alpinelinux.org/packages?name=tailscale&branch=edge
Updates #1988
Signed-off-by: Christine Dodrill <xe@tailscale.com>
The cyolosecurity fork of certstore did not update its module name and
thus can only be used with a replace directive. This interferes with
installing using `go install` so I created a tailscale fork with an
updated module name.
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Pull in the latest version of wireguard-windows.
Switch to upstream wireguard-go.
This requires reverting all of our import paths.
Unfortunately, this has to happen at the same time.
The wireguard-go change is very low risk,
as that commit matches our fork almost exactly.
(The only changes are import paths, CI files, and a go.mod entry.)
So if there are issues as a result of this commit,
the first place to look is wireguard-windows changes.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
At the start of a dev cycle we'll upgrade all dependencies.
Done with:
$ for Dep in $(cat go.mod | perl -ne '/(\S+) v/ and print "$1\n"'); do go get $Dep@upgrade; done
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If --until-direct is set, the goal is to make a direct connection.
If we failed at that, say so, and exit with an error.
RELNOTE=tailscale ping --until-direct (the default) now exits with
a non-zero exit code if no direct connection was established.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Yes, it printed, but that was an implementation detail for hashing.
And coming optimization will make it print even less.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The old way was way too fragile and had felt like it had more special
cases than normal cases. (see #1874, #1860, #1834, etc) It became very
obvious the old algorithm didn't work when we made the output be
pretty and try to show the user the command they need to run in
5ecc7c7200 for #1746)
The new algorithm is to map the prefs (current and new) back to flags
and then compare flags. This nicely handles the OS-specific flags and
the n:1 and 1:n flag:pref cases.
No change in the existing already-massive test suite, except some ordering
differences (the missing items are now sorted), but some new tests are
added for behavior that was broken before. In particular, it now:
* preserves non-pref boolean flags set to false, and preserves exit
node IPs (mapping them back from the ExitNodeID pref, as well as
ExitNodeIP),
* doesn't ignore --advertise-exit-node when doing an EditPrefs call
(#1880)
* doesn't lose the --operator on the non-EditPrefs paths (e.g. with
--force-reauth, or when the backend was not in state Running).
Fixes#1880
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The --advertise-routes and --advertise-exit-node flags both mutating
one pref is the gift that keeps on giving.
I need to rewrite the this up warning code to first map prefs back to
flag values and then just compare flags instead of comparing prefs,
but this is the minimal fix for now.
This also includes work on the tests, to make them easier to write
(and more accurate), by letting you write the flag args directly and
have that parse into the upArgs/MaskedPrefs directly, the same as the
code, rather than them being possibly out of sync being written by
hand.
Fixes https://twitter.com/EXPbits/status/1390418145047887877
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is needed because the original opts.Prefs field was at some point
subverted for use in frontend->backend state migration for backward
compatibility on some platforms. We still need that feature, but we
also need the feature of providing the full set of prefs from
`tailscale up`, *not* including overwriting the prefs.Persist keys, so
we can't use the original field from `tailscale up`.
`tailscale up` had attempted to compensate for that by doing SetPrefs()
before Start(), but that violates the ipn.Backend contract, which says
you should call Start() before anything else (that's why it's called
Start()). As a result, doing SetPrefs({ControlURL=...,
WantRunning=true}) would cause a connection to the *previous* control
server (because WantRunning=true), and then connect to the *new*
control server only after running Start().
This problem may have been avoided before, but only by pure luck.
It turned out to be relatively harmless since the connection to the old
control server was immediately closed and replaced anyway, but it
created a race condition that could have caused spurious notifications
or rejected keys if the server responded quickly.
As already covered by existing TODOs, a better fix would be to have
Start() get out of the business of state migration altogether. But
we're approaching a release so I want to make the minimum possible fix.
Fixes#1840.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
We were over-eager in running tailscale in GUI mode.
f42ded7acf fixed that by
checking for a variety of shell-ish env vars and using those
to force us into CLI mode.
However, for reasons I don't understand, those shell env vars
are present when Xcode runs Tailscale.app on my machine.
(I've changed no configs, modified nothing on a brand new machine.)
Work around that by adding an additional "only in GUI mode" check.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
I was going to write a test for this using the tstest/integration test
stuff, but the testcontrol implementation isn't quite there yet (it
always registers nodes and doesn't provide AuthURLs). So, manually
tested for now.
Fixes#1843
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This fixes#1833 in two ways:
* stop setting NoSNAT on non-Linux. It only matters on Linux and the flag
is hidden on non-Linux, but the code was still setting it. Because of
that, the new pref-reverting safety checks were failing when it was
changing.
* Ignore the two Linux-only prefs changing on non-Linux.
Fixes#1833
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There's no need to warn that it was not provided on the command line
after doing a sequence of up; logout; up --args. If you're asking for
tailscale to be up, you always mean that you prefer LoggedOut to become
false.
Fixes#1828
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
- Switch to our own simpler token bucket, since x/time/rate is missing
necessary stuff (can't provide your own time func; can't check the
current bucket contents) and it's overkill anyway.
- Add tests that actually include advancing time.
- Don't remove the rate limit on a message until there's enough room to
print at least two more of them. When we do, we'll also print how
many we dropped, as a contextual reminder that some were previously
lost. (This is more like how the Linux kernel does it.)
- Reformat the [RATE LIMITED] messages to be shorter, and to not
corrupt original message. Instead, we print the message, then print
its format string.
- Use %q instead of \"%s\", for more accurate parsing later, if the
format string contained quotes.
Fixes#1772
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
We had two separate code paths for the initial UDP listener bind
and any subsequent rebinds.
IPv6 got left out of the rebind code.
Rather than duplicate it there, unify the two code paths.
Then improve the resulting code:
* Rebind had nested listen attempts to try the user-specified port first,
and then fall back to :0 if that failed. Convert that into a loop.
* Initial bind tried only the user-specified port.
Rebind tried the user-specified port and 0.
But there are actually three ports of interest:
The one the user specified, the most recent port in use, and 0.
We now try all three in order, as appropriate.
* In the extremely rare case in which binding to port 0 fails,
use a dummy net.PacketConn whose reads block until close.
This will keep the wireguard-go receive func goroutine alive.
As a pleasant side-effect of this, if we decide that
we need to resuscitate #1796, it will now be much easier.
Fixes#1799
Co-authored-by: David Anderson <danderson@tailscale.com>
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
Assume it'll stay at 0 forever, so hard-code it
and delete code conditional on it being non-0.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
NetworkManager fixed the bug that forced us to use NetworkManager
if it's programming systemd-resolved, and in the same release also
made NetworkManager ignore DNS settings provided for unmanaged
interfaces... Which breaks what we used to do. So, with versions
1.26.6 and above, we MUST NOT use NetworkManager to indirectly
program systemd-resolved, but thankfully we can talk to resolved
directly and get the right outcome.
Fixes#1788
Signed-off-by: David Anderson <danderson@tailscale.com>
The new "tailscale up" checks previously didn't protect against
--advertise-exit-node being omitted in the case that
--advertise-routes was also provided. It wasn't done before because
there is no corresponding pref for "--advertise-exit-node"; it's a
helper flag that augments --advertise-routes. But that's an
implementation detail and we can still help users. We just have to
special case that pref and look whether the current routes include
both the v4 and v6 /0 routes.
Fixes#1767
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This doesn't make --operator implicit (which we might do in the
future), but it at least doesn't require repeating it in the future
when it already matches $USER.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
With this change, the ipnserver's safesocket.Listen (the localhost
tcp.Listen) happens right away, before any synchronous
TUN/DNS/Engine/etc setup work, which might be slow, especially on
early boot on Windows.
Because the safesocket.Listen starts up early, that means localhost
TCP dials (the safesocket.Connect from the GUI) complete successfully
and thus the GUI avoids the MessageBox error. (I verified that
pacifies it, even without a Listener.Accept; I'd feared that Windows
localhost was maybe special and avoided the normal listener backlog).
Once the GUI can then connect immediately without errors, the various
timeouts then matter less, because the backend is no longer trying to
race against the GUI's timeout. So keep retrying on errors for a
minute, or 10 minutes if the system just booted in the past 10
minutes.
This should fix the problem with Windows 10 desktops auto-logging in
and starting the Tailscale frontend which was then showing a
MessageBox error about failing to connect to tailscaled, which was
slow coming up because the Windows networking stack wasn't up
yet. Fingers crossed.
Fixes#1313 (previously #1187, etc)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This change implements Windows version of install-system-daemon and
uninstall-system-daemon subcommands. When running the commands the
user will install or remove Tailscale Windows service.
Updates #1232
Signed-off-by: Alex Brainman <alex.brainman@gmail.com>
Logout used to be a no-op, so the ipnserver previously synthensized a Logout
on disconnect. Now that Logout actually invalidates the node key that was
forcing all GUI closes to log people out.
Instead, add a method to LocalBackend to specifically mean "the
Windows GUI closed, please forget all the state".
Fixestailscale/corp#1591 (ignoring the notification issues, tracked elsewhere)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
On macOS, we link the CLI into the GUI executable so it can be included in
the Mac App Store build.
You then need to run it like:
/Applications/Tailscale.app/Contents/MacOS/Tailscale <command>
But our old detection of whether you're running that Tailscale binary
in CLI mode wasn't accurate and often bit people. For instance, when
they made a typo, it then launched in GUI mode and broke their
existing GUI connection (starting a new IPNExtension) and took down
their network.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The ipn.NewPrefs func returns a populated ipn.Prefs for historical
reasons. It's not used or as important as it once was, but it hasn't
yet been removed. Meanwhile, it contains some default values that are
used on some platforms. Notably, for this bug (#1725), Windows/Mac use
its Prefs.RouteAll true value (to accept subnets), but Linux users
have always gotten a "false" value for that, because that's what
cmd/tailscale's CLI default flag is _for all operating systems_. That
meant that "tailscale up" was rightfully reporting that the user was
changing an implicit setting: RouteAll was changing from true with
false with the user explicitly saying so.
An obvious fix might be to change ipn.NewPrefs to return
Prefs.RouteAll == false on some platforms, but the logic is
complicated by darwin: we want RouteAll true on windows, android, ios,
and the GUI mac app, but not the CLI tailscaled-on-macOS mode. But
even if we used build tags (e.g. the "redo" build tag) to determine
what the default is, that then means we have duplicated and differing
"defaults" between both the CLI up flags and ipn.NewPrefs. Furthering
that complication didn't seem like a good idea.
So, changing the NewPrefs defaults is too invasive at this stage of
the release, as is removing the NewPrefs func entirely.
Instead, tweak slightly the semantics of the ipn.Prefs.ControlURL
field. This now defines that a ControlURL of the empty string means
both "we're uninitialized" and also "just use the default".
Then, once we have the "empty-string-means-unintialized" semantics,
use that to suppress "tailscale up"'s recent implicit-setting-revert
checking safety net, if we've never initialized Tailscale yet.
And update/add tests.
Fixes#1725
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Will add more tests later but this locks in all the existing warnings
and errors at least, and some of the existing non-error behavior.
Mostly I want this to exist before I actually fix#1725.
Updates #1725
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
They were scattered/duplicated in misc places before.
It can't be in the client package itself for circular dep reasons.
This new package is basically tailcfg but for localhost
communications, instead of to control.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This changes the behavior of "tailscale up".
Previously "tailscale up" always did a new Start and reset all the settings.
Now "tailscale up" with no flags just brings the world [back] up.
(The opposite of "tailscale down").
But with flags, "tailscale up" now only is allowed to change
preferences if they're explicitly named in the flags. Otherwise it's
an error. Or you need to use --reset to explicitly nuke everything.
RELNOTE=tailscale up change
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was only Linux and BSDs before, but now with netstack mode, it also works on
Windows and darwin. It's not worth limiting it to certain platforms.
Tailscaled itself can complain/fail if it doesn't like the settings
for the mode/OS it's operating under.
Updates #707
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We already had SetNotifyCallback elsewhere on controlclient, so use
that name.
Baby steps towards some CLI refactor work.
Updates tailscale/tailscale#1436
This is usually the same as the requested interface, but on some
unixes can vary based on device number allocation, and on Windows
it's the GUID instead of the pretty name, since everything relating
to configuration wants the GUID.
Signed-off-by: David Anderson <danderson@tailscale.com>
Upstream wireguard-go has changed its receive model.
NewDevice now accepts a conn.Bind interface.
The conn.Bind is stateless; magicsock.Conns are stateful.
To work around this, we add a connBind type that supports
cheap teardown and bring-up, backed by a Conn.
The new conn.Bind allows us to specify a set of receive functions,
rather than having to shoehorn everything into ReceiveIPv4 and ReceiveIPv6.
This lets us plumbing DERP messages directly into wireguard-go,
instead of having to mux them via ReceiveIPv4.
One consequence of the new conn.Bind layer is that
closing the wireguard-go device is now indistinguishable
from the routine bring-up and tear-down normally experienced
by a conn.Bind. We thus have to explicitly close the magicsock.Conn
when the close the wireguard-go device.
One downside of this change is that we are reliant on wireguard-go
to call receiveDERP to process DERP messages. This is fine for now,
but is perhaps something we should fix in the future.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
The bool was already called useNetstack at the caller.
isUserspace (to mean netstack) is confusing next to wgengine.NewUserspaceEngine, as that's
a different type of 'userspace'.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The resolver still only supports a single upstream config, and
ipn/wgengine still have to split up the DNS config, but this moves
closer to unifying the DNS configs.
As a handy side-effect of the refactor, IPv6 MagicDNS records exist
now.
Signed-off-by: David Anderson <danderson@tailscale.com>
This adds a new ipn.MaskedPrefs embedding a ipn.Prefs, along with a
bunch of "has bits", kept in sync with tests & reflect.
Then it adds a Prefs.ApplyEdits(MaskedPrefs) method.
Then the ipn.Backend interface loses its weirdo SetWantRunning(bool)
method (that I added in 483141094c for "tailscale down")
and replaces it with EditPrefs (alongside the existing SetPrefs for now).
Then updates 'tailscale down' to use EditPrefs instead of SetWantRunning.
In the future, we can use this to do more interesting things with the
CLI, reconfiguring only certain properties without the reset-the-world
"tailscale up".
Updates #1436
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adding a subcommand which prints and logs a log marker. This should help
diagnose any issues that users face.
Fixes#1466
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Instead of having the CLI check whether IP forwarding is enabled, ask
tailscaled. It has a better idea. If it's netstack, for instance, the
sysctl values don't matter. And it's possible that only the daemon has
permission to know.
Fixes#1626
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Without this, `tailscale status` ignores the --socket flag on macOS and
always talks to the IPNExtension, even if you wanted it to inspect a
userspace tailscaled.
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
For discovery when an explicit hostname/IP is known. We'll still
also send it via control for finding peers by a list.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This makes setup more explicit in prod codepaths, without
requiring a bunch of arguments or helpers for tests and
userspace mode.
Signed-off-by: David Anderson <danderson@tailscale.com>
