So magicsock can later ask a DERP connection whether its source IP
would've changed if it reconnected.
Updates #3619
Change-Id: Ibc8810340c511d6786b60c78c1a61c09f5800e40
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Continuing work in 434af15a04, to make it possible for magicsock to
probe whether a DERP server is still there.
Updates #3619
Change-Id: I366a77c27e93b876734e64f445b85ef01eb590f2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In prep for a future change to have client ping derp connections
when their state is questionable, rather than aggressively tearing
them down and doing a heavy reconnect when their state is unknown.
We already support ping/pong in the other direction (servers probing
clients) so we already had the two frame types, but I'd never finished
this direction.
Updates #3619
Change-Id: I024b815d9db1bc57c20f82f80f95fb55fc9e2fcc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We only tracked the transport type (UDP vs DERP), not what they were.
Change-Id: Ia4430c1c53afd4634e2d9893d96751a885d77955
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Don't just ignore them. See if this makes them calm down.
Updates #3363
Change-Id: Id1d66308e26660d26719b2538b577522a1e36b63
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To convince me it's not as alloc-y as it looks.
Change-Id: I503a0cc267268a23d2973dfde9833c420be4e868
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is for use by the Windows GUI client to log via when an
exit node is in use, so the logs don't go out via the exit node and
instead go directly, like tailscaled's. The dialer tried to do that
in the unprivileged GUI by binding to a specific interface, but the
"Internet Kill Switch" installed by tailscaled for exit nodes
precludes that from working and instead the GUI fails to dial out.
So, go through tailscaled (with a CONNECT request) instead.
Fixestailscale/corp#3169
Change-Id: I17a8efdc1d4b8fed53a29d1c19995592b651b215
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The intent of the updateIPs code is to add & remove IP addresses
to netstack based on what we get from the netmap.
But netstack itself adds 255.255.255.255/32 apparently and we always
fight it (and it adds it back?). So stop fighting it.
Updates #2642 (maybe fixes? maybe.)
Change-Id: I37cb23f8e3f07a42a1a55a585689ca51c2be7c60
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The new /keys endpoint allows you to list API and machine auth keys.
You can also create machine auth key.
It currently does not support creating another API key.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This moves the Windows-only initialization of the filelogger into
logpolicy. Previously we only did it when babysitting the tailscaled
subprocess, but this meant that log messages from the service itself
never made it to disk. Examples that weren't logged to disk:
* logtail unable to dial out,
* DNS flush messages from the service
* svc.ChangeRequest messages (#3581)
This is basically the same fix as #3571 but staying in the Logf type,
and avoiding build-tagged file (which wasn't quite a goal, but
happened and seemed nice)
Fixes#3570
Co-authored-by: Aaron Klotz <aaron@tailscale.com>
Change-Id: Iacd80c4720b7218365ec80ae143339d030842702
Make shrinkDefaultRoute a pure function.
Instead of calling interfaceRoutes, accept that information as parameters.
Hard-code those parameters in TestShrinkDefaultRoute.
Fixes#3580
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
One option was to just hide "offline" in the text output, but that
doesn't fix the JSON output.
The next option was to lie and say it's online in the JSON (which then
fixes the "offline" in the text output).
But instead, this sets the self node's "Online" to whether we're in an
active map poll.
Fixes#3564
Change-Id: I9b379989bd14655198959e37eec39bb570fb814a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
testNodes have a reference to a testing.TB via their env.
Use it instead of making the caller pass theirs.
We did this in some methods but not others; finish the job.
This simplifies the call sites.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
magicsock was hanging onto its netmap on logout,
which caused tailscale status to display partial
information about a bunch of zombie peers.
After logout, there should be no peers.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
If you're using -verbose-tailscaled, you're doing in-the-weeds debugging,
so you probably want the verbose output.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
I'm sick of this flaking. Even if this isn't the right fix, it
stops the alert fatigue.
Updates #3020
Change-Id: I4001c127d78f1056302f7741adec34210a72ee61
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And it updates the build tag style on a couple files.
Change-Id: I84478d822c8de3f84b56fa1176c99d2ea5083237
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I broke it in 1.17.x sometime while rewiring some logs stuff,
mostly in 0653efb092 (but with a handful
of logs-related changes around that time)
Fixestailscale/corp#3265
Change-Id: Icb5c07412dc6d55f1d9244c5d0b51dceca6a7e34
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The existing code relied on the Go build cache to avoid
needless work when obtaining the tailscale binaries.
For non-obvious reasons, the binaries were getting re-linked
every time, which added 600ms or so on my machine to every test.
Instead, build the binaries exactly once, on demand.
This reduces the time to run 'go test -count=5' from 34s to 10s
on my machine.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
After apt install, Kali Linux had not enabled nor started
the tailscaled systemd service. Add a quirks mode to enable
and start it after apt install for debian platforms.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
One of the most annoying parts of using the Tailscale CLI on Windows
and the macOS GUI is that Tailscale's GUIs default to running with
"Route All" (accept all non-exitnode subnet routes) but the CLI--being
originally for Linux--uses the Linux default, which is to not accept
subnets.
Which means if a Windows user does, e.g.:
tailscale up --advertise-exit-node
Or:
tailscale up --shields-up
... then it'd warn about reverting the --accept-routes option, which the user
never explicitly used.
Instead, make the CLI's default match the platform/GUI's default.
Change-Id: I15c804b3d9b0266e9ca8651e0c09da0f96c9ef8d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
on error.
While debugging a customer issue where the firewallTweaker was failing
the only message we have is `router: firewall: error adding
Tailscale-Process rule: exit status 1` which is not really helpful.
This will help diagnose firewall tweaking failures.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
fee2d9fad added support for cmd/tailscale to connect to IPNExtension.
It came in two parts: If no socket was provided, dial IPNExtension first,
and also, if dialing the socket failed, fall back to IPNExtension.
The second half of that support caused the integration tests to fail
when run on a machine that was also running IPNExtension.
The integration tests want to wait until the tailscaled instances
that they spun up are listening. They do that by dialing the new
instance. But when that dial failed, it was falling back to IPNExtension,
so it appeared (incorrectly) that tailscaled was running.
Hilarity predictably ensued.
If a user (or a test) explicitly provides a socket to dial,
it is a reasonable assumption that they have a specific tailscaled
in mind and don't want to fall back to IPNExtension.
It is certainly true of the integration tests.
Instead of adding a bool to Connect, split out the notion of a
connection strategy. For now, the implementation remains the same,
but with the details hidden a bit. Later, we can improve that.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
This is enough to handle the DNS queries as generated by Go's
net package (which our HTTP/SOCKS client uses), and the responses
generated by the ExitDNS DoH server.
This isn't yet suitable for putting on 100.100.100.100 where a number
of different DNS clients would hit it, as this doesn't yet do
EDNS0. It might work, but it's untested and likely incomplete.
Likewise, this doesn't handle anything about truncation, as the
exchanges are entirely in memory between Go or DoH. That would also
need to be handled later, if/when it's hooked up to 100.100.100.100.
Updates #3507
Change-Id: I1736b0ad31eea85ea853b310c52c5e6bf65c6e2a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It's been a bunch of releases now since the TailscaleIPs slice
replacement was added.
Change-Id: I3bd80e1466b3d9e4a4ac5bedba8b4d3d3e430a03
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It will be used for ICMPv6 next, so pass in the proto.
Also, use the ipproto constants rather than hardcoding the mysterious
number.
Change-Id: I57b68bdd2d39fff75f82affe955aff9245de246b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Allow users of CallbackRouter to supply a GetBaseConfig
implementation. This is expected to be used on Android,
which currently lacks both a) platform support for
Split-DNS and b) a way to retrieve the current DNS
servers.
iOS/macOS also use the CallbackRouter but have platform
support for SplitDNS, so don't need getBaseConfig.
Updates https://github.com/tailscale/tailscale/issues/2116
Updates https://github.com/tailscale/tailscale/issues/988
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
