Rename StatisticsEnable as SetStatisticsEnabled to be consistent
with other similarly named methods.
Rename StatisticsExtract as ExtractStatistics to follow
the convention where methods start with a verb.
It was originally named with Statistics as a prefix so that
statistics related methods would sort well in godoc,
but that property no longer holds.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
If Wrapper.StatisticsEnable is enabled,
then per-connection counters are maintained.
If enabled, Wrapper.StatisticsExtract must be periodically called
otherwise there is unbounded memory growth.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
High-level API:
type Statistics struct { ... }
type Counts struct { TxPackets, TxBytes, RxPackets, RxBytes uint64 }
func (*Statistics) UpdateTx([]byte)
func (*Statistics) UpdateRx([]byte)
func (*Statistics) Extract() map[flowtrack.Tuple]Counts
The API accepts a []byte instead of a packet.Parsed so that a future
implementation can directly hash the address and port bytes,
which are contiguous in most IP packets.
This will be useful for a custom concurrent-safe hashmap implementation.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Most visible when using tsnet.Server, but could have resulted in dropped
messages in a few other places too.
Fixes#5743
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
I brain-o'ed the math earlier. The NextDNS prefix is /32 (actually
/33, but will guarantee last bit is 0), so we have 128-32 = 96 bits
(12 bytes) of config/profile ID that we can extract. NextDNS doesn't
currently use all those, but might.
Updates #2452
Change-Id: I249bd28500c781e45425fd00fd3f46893ae226a2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
- removed some in-flow time calls
- increase buffer size to 2MB to overcome syscall cost
- move relative time computation from record to report time
Signed-off-by: James Tucker <james@tailscale.com>
The fragment offset is an 8 byte offset rather than a byte offset, so
the short packet limit is now in fragment block size in order to compare
with the offset value.
The packet flags are in the first 3 bits of the flags/frags byte, and
so after conversion to a uint16 little endian value they are at the
start, not the end of the value - the mask for extracting "more
fragments" is adjusted to match this byte.
Extremely short fragments less than 80 bytes are dropped, but fragments
over 80 bytes are now accepted.
Fixes#5727
Signed-off-by: James Tucker <james@tailscale.com>
This doesn't change any behaviour for now, other than maybe running a
full netcheck more often. The intent is to start gathering data on
captive portals, and additionally, seeing this in the 'tailscale
netcheck' command should provide a bit of additional information to
users.
Updates #1634
Change-Id: I6ba08f9c584dc0200619fa97f9fde1a319f25c76
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Reference: https://golang.org/doc/go1.16#ioutil
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
The plan has changed. Doing query parameters rather than path +
heades. NextDNS added support for query parameters.
Updates #2452
Change-Id: I4783c0a06d6af90756d9c80a7512644ba702388c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For debugging a macOS-specific magicsock issue. macOS runs in
bind-to-interface mode always. This lets me force Linux into the same
mode as macOS, even if the Linux kernel supports SO_MARK, as it
usually does.
Updates #2331 etc
Change-Id: Iac9e4a7429c1781337e716ffc914443b7aa2869d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Clarify & verify that some DoH URLs can be sent over tailcfg
in some limited cases.
Updates #2452
Change-Id: Ibb25db77788629c315dc26285a1059a763989e24
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
NextDNS is unique in that users create accounts and then get
user-specific DNS IPs & DoH URLs.
For DoH, the customer ID is in the URL path.
For IPv6, the IP address includes the customer ID in the lower bits.
For IPv4, there's a fragile "IP linking" mechanism to associate your
public IPv4 with an assigned NextDNS IPv4 and that tuple maps to your
customer ID.
We don't use the IP linking mechanism.
Instead, NextDNS is DoH-only. Which means using NextDNS necessarily
shunts all DNS traffic through 100.100.100.100 (programming the OS to
use 100.100.100.100 as the global resolver) because operating systems
can't usually do DoH themselves.
Once it's in Tailscale's DoH client, we then connect out to the known
NextDNS IPv4/IPv6 anycast addresses.
If the control plane sends the client a NextDNS IPv6 address, we then
map it to the corresponding NextDNS DoH with the same client ID, and
we dial that DoH server using the combination of v4/v6 anycast IPs.
Updates #2452
Change-Id: I3439d798d21d5fc9df5a2701839910f5bef85463
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is especially helpful as we launch newer DERPs over time, and older
clients have progressively out-of-date static DERP maps baked in. After
this, as long as the client has successfully connected once, it'll cache
the most recent DERP map it knows about.
Resolves an in-code comment from @bradfitz
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
If ExtraRecords (Hosts) are specified without a corresponding split
DNS route and global DNS is specified, then program the host OS DNS to
use 100.100.100.100 so it can blend in those ExtraRecords.
Updates #1543
Change-Id: If49014a5ecc8e38978ff26e54d1f74fe8dbbb9bc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Somehow I accidentally set the wrong registry value here.
It should be DisableDynamicUpdate=1 and not EnableDNSUpdate=0.
This is a regression from 545639e.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
See https://mullvad.net/en/help/dns-over-https-and-dns-over-tls/
The Mullvad DoH servers appear to only speak HTTP/2 and
the use of a non-nil DialContext in the http.Transport
means that ForceAttemptHTTP2 must be set to true to be
able to use them.
Signed-off-by: Nahum Shalman <nahamu@gmail.com>
This works around the 2.3s delay in short name lookups when SNR is
enabled.
C:\Windows\System32\drivers\etc\hosts file. We only add known hosts that
match the search domains, and we populate the list in order of
Search Domains so that our matching algorithm mimics what Windows would
otherwise do itself if SNR was off.
Updates #1659
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Convert ParseResponse and Response to use netip.AddrPort instead of
net.IP and separate port.
Fixes#5281
Signed-off-by: Kris Brandow <kris.brandow@gmail.com>
Like LLMNR, NetBIOS also adds resolution delays and we don't support it
anyway so just disable it on the interface.
Updates #1659
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Currently we forward unmatched queries to the default resolver on
Windows. This results in duplicate queries being issued to the same
resolver which is just wasted.
Updates #1659
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Otherwise we just keep looping over the same thing again and again.
```
dns udp query: upstream nameservers not set
dns udp query: upstream nameservers not set
dns udp query: upstream nameservers not set
```
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The definition of winHTTPProxyInfo was using the wrong type (uint16 vs uint32)
for its first field. I fixed that type.
Furthermore, any UTF16 strings returned in that structure must be explicitly
freed. I added code to do this.
Finally, since this is the second time I've seen type safety errors in this code,
I switched the native API calls over to use wrappers generated by mkwinsyscall.
I know that would not have helped prevent the previous two problems, but every
bit helps IMHO.
Updates https://github.com/tailscale/tailscale/issues/4811
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
As discussed in previous PRs, we can register for notifications when group
policies are updated and act accordingly.
This patch changes nrptRuleDatabase to receive notifications that group policy
has changed and automatically move our NRPT rules between the local and
group policy subkeys as needed.
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
When dbus restarts it can cause the tailscaled to crash because the nil
signal was not handled in resolved.Fixing so the nil signal leads to a
connection reset and tailscaled stays connected to systemd when dbus restarted.
Fixes#4645
Co-authored-by: James Tucker <james@tailscale.com>
Signed-off-by: nyghtowl <warrick@tailscale.com>
Co-authored-by: James Tucker <james@tailscale.com>
This lets us distinguish "no IPv6 because the device's ISP doesn't
offer IPv6" from "IPv6 is unavailable/disabled in the OS".
Signed-off-by: David Anderson <danderson@tailscale.com>
Together with 06aa141632 this minimizes
the number of NEPacketTunnelNetworkSettings updates that we have to do,
and thus avoids Chrome interrupting outstanding requests due to
(perceived) network changes.
Updates #3102
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
And remove the GCP special-casing from ipn/ipnlocal; do it only in the
forwarder for *.internal.
Fixes#4980Fixes#4981
Change-Id: I5c481e96d91f3d51d274a80fbd37c38f16dfa5cb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This does three things:
* If you're on GCP, it adds a *.internal DNS split route to the
metadata server, so we never break GCP DNS names. This lets people
have some Tailscale nodes on GCP and some not (e.g. laptops at home)
without having to add a Tailnet-wide *.internal DNS route.
If you already have such a route, though, it won't overwrite it.
* If the 100.100.100.100 DNS forwarder has nowhere to forward to,
it forwards it to the GCP metadata IP, which forwards to 8.8.8.8.
This means there are never errNoUpstreams ("upstream nameservers not set")
errors on GCP due to e.g. mangled /etc/resolv.conf (GCP default VMs
don't have systemd-resolved, so it's likely a DNS supremacy fight)
* makes the DNS fallback mechanism use the GCP metadata IP as a
fallback before our hosted HTTP-based fallbacks
I created a default GCP VM from their web wizard. It has no
systemd-resolved.
I then made its /etc/resolv.conf be empty and deleted its GCP
hostnames in /etc/hosts.
I then logged in to a tailnet with no global DNS settings.
With this, tailscaled writes /etc/resolv.conf (direct mode, as no
systemd-resolved) and sets it to 100.100.100.100, which then has
regular DNS via the metadata IP and *.internal DNS via the metadata IP
as well. If the tailnet configures explicit DNS servers, those are used
instead, except for *.internal.
This also adds a new util/cloudenv package based on version/distro
where the cloud type is only detected once. We'll likely expand it in
the future for other clouds, doing variants of this change for other
popular cloud environments.
Fixes#4911
RELNOTES=Google Cloud DNS improvements
Change-Id: I19f3c2075983669b2b2c0f29a548da8de373c7cf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There appear to be devices out there which send only their
first descriptor in response to a discovery packet for
`ssdp:all`, for example the Sagemcom FAST3890V3 only sends
urn:schemas-wifialliance-org:device:WFADevice:1
Send both ssdp:all and a discovery frame for
InternetGatewayDevice specifically.
Updates https://github.com/tailscale/tailscale/issues/3557
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
When there are group policy entries for the NRPT that do not belong to Tailscale,
we recognize that we need to add ourselves to group policy and use that registry
key instead of the local one. We also refresh the group policy settings as
necessary to ensure that our changes take effect immediately.
Fixes https://github.com/tailscale/tailscale/issues/4607
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Start up a backend service, put a SOCKS5 server in front
of it, and verify that we can get data from the backend via
SOCKS5.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
In the 1.27 unstable releases we set the min-version to iOS15,
which means we have 50 MBytes of RAM in the Network Extension.
https://tailscale.com/blog/go-linker/
Include the UPnP/NAT-PMP/PCP portmapper support now that there
is memory for it.
Fixes https://github.com/tailscale/tailscale/issues/2495
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
We can't do Noise-over-HTTP in Wasm/JS (because we don't have bidirectional
communication), but we should be able to do it over WebSockets. Reuses
derp WebSocket support that allows us to turn a WebSocket connection
into a net.Conn.
Updates #3157
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Currently we only support "via-<site-id>.<IPv4>", however that does not
work with Google Chrome which parses `http://via-1.10.0.0.1` as a search
string and not as a URL. This commit introduces "<IPv4>.via-<site-id>"
(`http://10.0.0.1.via-1`) which is parsed correctly by Chrome.
Updates #3616
Signed-off-by: Maisem Ali <maisem@tailscale.com>
AFAICT this isn't documented on MSDN, but based on the issue referenced below,
NRPT rules are not working when a rule specifies > 50 domains.
This patch modifies our NRPT rule generator to split the list of domains
into chunks as necessary, and write a separate rule for each chunk.
For compatibility reasons, we continue to use the hard-coded rule ID, but
as additional rules are required, we generate new GUIDs. Those GUIDs are
stored under the Tailscale registry path so that we know which rules are ours.
I made some changes to winutils to add additional helper functions in support
of both the code and its test: I added additional registry accessors, and also
moved some token accessors from paths to util/winutil.
Fixes https://github.com/tailscale/coral/issues/63
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Fixes https://github.com/tailscale/corp/issues/5198
The upstream forwarder will block indefinitely on `udpconn.ReadFrom` if no
reply is recieved, due to the lack of deadline on the connection object.
There still isn't a deadline on the connection object, but the automatic closing
of the context on deadline expiry will close the connection via `closeOnCtxDone`,
unblocking the read and resulting in a normal teardown.
Signed-off-by: Tom DNetto <tom@tailscale.com>
We were marking them as gauges, but they are only ever incremented,
thus counter is more appropriate.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
* net/dns, wgengine: implement DNS over TCP
Signed-off-by: Tom DNetto <tom@tailscale.com>
* wgengine/netstack: intercept only relevant port/protocols to quad-100
Signed-off-by: Tom DNetto <tom@tailscale.com>
This were intended to be pushed to #4408, but in my excitement I
forgot to git push :/ better late than never.
Signed-off-by: Tom DNetto <tom@tailscale.com>
This change wires netstack with a hook for traffic coming from the host
into the tun, allowing interception and handling of traffic to quad-100.
With this hook wired, magicDNS queries over UDP are now handled within
netstack. The existing logic in wgengine to handle magicDNS remains for now,
but its hook operates after the netstack hook so the netstack implementation
takes precedence. This is done in case we need to support platforms with
netstack longer than expected.
Signed-off-by: Tom DNetto <tom@tailscale.com>
A subsequent commit implements handling of magicDNS traffic via netstack.
Implementing this requires a hook for traffic originating from the host and
hitting the tun, so we make another hook to support this.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Moves magicDNS-specific handling out of Resolver & into dns.Manager. This
greatly simplifies the Resolver to solely issuing queries and returning
responses, without channels.
Enforcement of max number of in-flight magicDNS queries, assembly of
synthetic UDP datagrams, and integration with wgengine for
recieving/responding to magicDNS traffic is now entirely in Manager.
This path is being kept around, but ultimately aims to be deleted and
replaced with a netstack-based path.
This commit is part of a series to implement magicDNS using netstack.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Well, goimports actually (which adds the normal import grouping order we do)
Change-Id: I0ce1b1c03185f3741aad67c14a7ec91a838de389
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This updates the fix from #4562 to pick the proxy based on the request
scheme.
Updates #4395, #2605, #4562
Signed-off-by: James Tucker <james@tailscale.com>
Currently we try to use `https://` when we see `https_host`, however
that doesn't work and results in errors like `Received error: fetch
control key: Get "https://controlplane.tailscale.com/key?v=32":
proxyconnect tcp: tls: first record does not look like a TLS handshake`
This indiciates that we are trying to do a HTTPS request to a HTTP
server. Googling suggests that the standard is to use `http` regardless
of `https` or `http` proxy
Updates #4395, #2605
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The connections returned from SystemDial are automatically closed when
there is a major link change.
Also plumb through the dialer to the noise client so that connections
are auto-reset when moving from cellular to WiFi etc.
Updates #3363
Signed-off-by: Maisem Ali <maisem@tailscale.com>
