The caller of func run said:
// No need to log; the func already did
But that wasn't true. Some return paths didn't log.
So instead, return rich errors and have func main do the logging,
so we can't miss anything in the future.
Prior to this, safesocket.Listen for instance was causing tailscaled
to os.Exit(1) on failure without any clue as to why.
Change-Id: I9d71cc4d73d0fed4aa1b1902cae199f584f25793
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And simplify, unexport some tsdial/netstack stuff in the the process.
Fixes#3475
Change-Id: I186a5a5cbd8958e25c075b4676f7f6e70f3ff76e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This starts to refactor tsdial.Dialer's name resolution to have
different stages: in-memory MagicDNS vs system resolution. A future
change will plug in ExitDNS resolution.
This also plumbs a Dialer into netstack and unexports the dnsMap
internals.
And it removes some of the async AddNetworkMapCallback usage and
replaces it with synchronous updates of the Dialer's netmap
from LocalBackend, since the LocalBackend has the Dialer too.
Updates #3475
Change-Id: Idcb7b1169878c74f0522f5151031ccbc49fe4cb4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In prep for moving stuff out of LocalBackend.
Change-Id: I9725aa9c3ebc7275f8c40e040b326483c0340127
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Not done yet, but this move more of the outbound dial special casing
from random packages into tsdial, which aspires to be the one unified
place for all outbound dialing shenanigans.
Then this plumbs it all around, so everybody is ultimately
holding on to the same dialer.
As of this commit, macOS/iOS using an exit node should be able to
reach to the exit node's DoH DNS proxy over peerapi, doing the sockopt
to stay within the Network Extension.
A number of steps remain, including but limited to:
* move a bunch more random dialing stuff
* make netstack-mode tailscaled be able to use exit node's DNS proxy,
teaching tsdial's resolver to use it when an exit node is in use.
Updates #1713
Change-Id: I1e8ee378f125421c2b816f47bc2c6d913ddcd2f5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For now this just deletes the net/socks5/tssocks implementation (and
the DNSMap stuff from wgengine/netstack) and moves it into net/tsdial.
Then initialize a Dialer early in tailscaled, currently only use for the
outbound and SOCKS5 proxies. It will be plumbed more later. Notably, it
needs to get down into the DNS forwarder for exit node DNS forwading
in netstack mode. But it will also absorb all the peerapi setsockopt
and netns Dial and tlsdial complexity too.
Updates #1713
Change-Id: Ibc6d56ae21a22655b2fa1002d8fc3f2b2ae8b6df
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And annotate magicsock as a start.
And add localapi and debug handlers with the Prometheus-format
exporter.
Updates #3307
Change-Id: I47c5d535fe54424741df143d052760387248f8d3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
More work towards removing the massive ipnserver.Run and ipnserver.Options
and making composable pieces.
Work remains. (The getEngine retry loop on Windows complicates things.)
For now some duplicate code exists. Once the Windows side is fixed
to either not need the retry loop or to move the retry loop into a
custom wgengine.Engine wrapper, then we can unify tailscaled_windows.go
too.
Change-Id: If84d16e3cd15b54ead3c3bb301f27ae78d055f80
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
github.com/go-multierror/multierror served us well.
But we need a few feature from it (implement Is),
and it's not worth maintaining a fork of such a small module.
Instead, I did a clean room implementation inspired by its API.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Even if not in use. We plan to use it for more stuff later.
(not for iOS or macOS-GUIs yet; only tailscaled)
Change-Id: Idaef719d2a009be6a39f158fd8f57f8cca68e0ee
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
From https://github.com/tailscale/tailscale/pull/1919 with
edits by bradfitz@.
This change introduces a new storage provider for the state file. It
allows users to leverage AWS SSM parameter store natively within
tailscaled, like:
$ tailscaled --state=arn:aws:ssm:eu-west-1:123456789:parameter/foo
Known limitations:
- it is not currently possible to specific a custom KMS key ID
RELNOTE=tailscaled on Linux supports using AWS SSM for state
Edits-By: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Maxime VISONNEAU <maxime.visonneau@gmail.com>
The old name invited confusion:
* is this the HTTP proxy to use ourselves? (no, that's
via an environment variable, per proxy conventions)
* is this for LetsEncrypt https-to-localhost-http
proxying? (no, that'll come later)
So rename to super verbose --outbound-http-proxy-listen
before the 1.16.0 release to make it clear what it is.
It listens (serves) and it's for outbound, not inbound.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds support for tailscaled to be an HTTP proxy server.
It shares the same backend dialing code as the SOCK5 server, but the
client protocol is HTTP (including CONNECT), rather than SOCKS.
Fixes#2289
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The earlier 382b349c54 was too late,
as engine creation itself needed to listen on things.
Fixes#2827
Updates #2822
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Allows FreeBSD to function as an exit node in the same way
that Windows and Tailscaled-on-MacOS do.
RELNOTE=FreeBSD can now function as an exit node.
Fixes https://github.com/tailscale/tailscale/issues/2498
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
Still very much a prototype (hard-coded IPs, etc) but should be
non-invasive enough to submit at this point and iterate from here.
Updates #2589
Co-Author: David Crawshaw <crawshaw@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Prep for #1591 which will need to make Linux's router react to changes
that the link monitor observes.
The router package already depended on the monitor package
transitively. Now it's explicit.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To unify the Windows service and non-service/non-Windows paths a bit.
And provides a way to make Linux act like Windows for testing.
(notably, for testing the fix to #2137)
One perhaps visible change of this is that tailscaled.exe when run in
cmd.exe/powershell (not as a Windows Service) no longer uses the
"_daemon" autostart key. But in addition to being naturally what falls
out of this change, that's also what Windows users would likely want,
as otherwise the unattended mode user is ignored when the "_daemon"
autostart key is specified. Notably, this would let people debug what
their normally-run-as-a-service tailscaled is doing, even when they're
running in Unattended Mode.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Assume it'll stay at 0 forever, so hard-code it
and delete code conditional on it being non-0.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
Logout used to be a no-op, so the ipnserver previously synthensized a Logout
on disconnect. Now that Logout actually invalidates the node key that was
forcing all GUI closes to log people out.
Instead, add a method to LocalBackend to specifically mean "the
Windows GUI closed, please forget all the state".
Fixestailscale/corp#1591 (ignoring the notification issues, tracked elsewhere)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is usually the same as the requested interface, but on some
unixes can vary based on device number allocation, and on Windows
it's the GUID instead of the pretty name, since everything relating
to configuration wants the GUID.
Signed-off-by: David Anderson <danderson@tailscale.com>
The bool was already called useNetstack at the caller.
isUserspace (to mean netstack) is confusing next to wgengine.NewUserspaceEngine, as that's
a different type of 'userspace'.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For discovery when an explicit hostname/IP is known. We'll still
also send it via control for finding peers by a list.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This makes setup more explicit in prod codepaths, without
requiring a bunch of arguments or helpers for tests and
userspace mode.
Signed-off-by: David Anderson <danderson@tailscale.com>
So we can empty import the guts of cmd/tailscaled from another
module for go mod tidy reasons.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Part of overall effort to clean up, unify, use link monitoring more,
and make Tailscale quieter when all networks are down. This is especially
bad on macOS where we can get killed for not being polite it seems.
(But we should be polite in any case)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And add a --socks5-server flag.
And fix a race in SOCKS5 replies where the response header was written
concurrently with the copy from the backend.
Co-authored with Naman Sood.
Updates #707
Updates #504
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Not usefully functional yet (mostly a proof of concept), but getting
it submitted for some work @namansood is going to do atop this.
Updates #707
Updates #634
Updates #48
Updates #835
Log levels can now be specified with "[v1] " or "[v2] " substrings
that are then stripped and filtered at the final logger. This follows
our existing "[unexpected]" etc convention and doesn't require a
wholesale reworking of our logging at the moment.
cmd/tailscaled then gets a new --verbose=N flag to take a log level
that controls what gets logged to stderr (and thus systemd, syslog,
etc). Logtail is unaffected by --verbose.
This commit doesn't add annotations to any existing log prints. That
is in the next commit.
Updates #924
Updates #282
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When building with redo, also include the git commit hash
from the proprietary repo, so that we have a precise commit
that identifies all build info (including Go toolchain version).
Add a top-level build script demonstrating to downstream distros
how to burn the right information into builds.
Adjust `tailscale version` to print commit hashes when available.
Fixes#841.
Signed-off-by: David Anderson <danderson@tailscale.com>
The RusagePrefixLog is rarely useful, hasn't been useful in a long
time, is rarely the measurement we need, and is pretty spammy (and
syscall-heavy). Disable it by default. We can enable it when we're
debugging memory.
SIGPIPE can be generated when CLIs disconnect from tailscaled. This
should not terminate the process.
Signed-off-by: David Anderson <danderson@tailscale.com>
tailscaled receives a SIGPIPE when CLIs disconnect from it. We shouldn't
shut down in that case.
This reverts commit 43b271cb26.
Signed-off-by: David Anderson <danderson@tailscale.com>
So a backend in server-an-error state (as used by Windows) can try to
create a new Engine again each time somebody re-connects, relaunching
the GUI app.
(The proper fix is actually fixing Windows issues, but this makes things better
in the short term)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
- Reformat the warning about a message being rate limited to print the
format string, rather than the formatted message. This helps give a
clue what "type" of message is being limited.
- Change the rate limit warning to be [RATE LIMITED] in all caps. This
uses less space on each line, plus is more noticeable.
- In tailscaled, change the frequency to be less often (once every 5
seconds per format string) but to allow bursts of up to 5 messages.
This greatly reduces the number of messages that are rate limited
during startup, but allows us to tighten the limit even further during
normal runtime.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
This cuts RSS from ~30MB to ~20MB on my machine, after the previous fix
to get rid of unnecessary zstd buffers.
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
Also stop logging data sent/received from nodes we're not connected to (ie all those `x`s being logged in the `peers: ` line)
Signed-off-by: Wendi <wendi.yu@yahoo.ca>
Implement rate limiting on log messages
Addresses issue #317, where logs can get spammed with the same message
nonstop. Created a rate limiting closure on logging functions, which
limits the number of messages being logged per second based on format
string. To keep memory usage as constant as possible, the previous cache
purging at periodic time intervals has been replaced by an LRU that
discards the oldest string when the capacity of the cache is reached.
Signed-off-by: Wendi Yu <wendi.yu@yahoo.ca>
