It was used when we only supported subnet routers on linux
and would nil out the SubnetRoutes slice as no other router
worked with it, but now we support subnet routers on ~all platforms.
The field it was setting to nil is now only used for network logging
and nowhere else, so keep the field but drop the SubnetRouterWrapper
as it's not useful.
Updates #cleanup
Change-Id: Id03f9b6ec33e47ad643e7b66e07911945f25db79
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Updates #7946
[@bradfitz fixed up version of #8417]
Change-Id: I1dbf6fa8d525b25c0d7ad5c559a7f937c3cd142a
Signed-off-by: alexelisenko <39712468+alexelisenko@users.noreply.github.com>
Signed-off-by: Alex Paguis <alex@windscribe.com>
This names the func() that Once-unlocked LocalBackend.mu. It does so
both for docs and because it can then have a method: Unlock, for the
few points that need to explicitly unlock early (the cause of all this
mess). This makes those ugly points easy to find, and also can then
make them stricter, panicking if the mutex is already unlocked. So a
normal call to the func just once-releases the mutex, returning false
if it's already done, but the Unlock method is the strict one.
Then this uses it more, so most the b.mu.Unlock calls remaining are
simple cases and usually defers.
Updates #11649
Change-Id: Ia070db66c54a55e59d2f76fdc26316abf0dd4627
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
A number of methods in LocalBackend (with suffixed "LockedOnEntry")
require b.mu be held but unlock it on the way out. That's asymmetric
and atypical and error prone.
This adds a helper method to LocalBackend that locks the mutex and
returns a sync.OnceFunc that unlocks the mutex. Then we pass around
that unlocker func down the chain to make it explicit (and somewhat
type check the passing of ownership) but also let the caller defer
unlock it, in the case of errors/panics that happen before the callee
gets around to calling the unlock.
This revealed a latent bug in LocalBackend.DeleteProfile which double
unlocked the mutex.
Updates #11649
Change-Id: I002f77567973bd77b8906bfa4ec9a2049b89836a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The output was changing randomly per run, due to range over a map.
Then some misc style tweaks I noticed while debugging.
Fixes#11629
Change-Id: I67aef0e68566994e5744d4828002f6eb70810ee1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The netcheck package and the magicksock package coordinate via the
health package, but both sides have time based heuristics through
indirect dependencies. These were misaligned, so the implemented
heuristic aimed at reducing DERP moves while there is active traffic
were non-operational about 3/5ths of the time.
It is problematic to setup a good test for this integration presently,
so instead I added comment breadcrumbs along with the initial fix.
Updates #8603
Signed-off-by: James Tucker <james@tailscale.com>
This change makes the normalizeShareName function public, so it can be
used for validation in control.
Updates tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
And make NewMultiLabelMap panic earlier (at construction time)
if the comparable struct type T violates the documented rules,
rather than panicking at Add time.
Updates #cleanup
Change-Id: Ib1a03babdd501b8d699c4f18b1097a56c916c6d5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Only on Gokrazy, set sysctls to enable IP forwarding so subnet routing
and advertised exit node works.
Fixes#11405
Signed-off-by: Joonas Kuorilehto <joneskoo@derbian.fi>
There are no mutations to the input,
so we can support both ~string and ~[]byte just fine.
Updates #cleanup
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This change switches the api to /drive, rather than the previous /tailfs
as well as updates the log lines to reflect the new value. It also
cleans up some existing tailfs references.
Updates tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This allows clients to avoid establishing their VPN multiple times when
both routes and DNS are changing in rapid succession.
Updates tailscale/corp#18928
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Specifying a smaller window size during compression
provides a knob to tweak the tradeoff between memory usage
and the compression ratio.
Updates tailscale/corp#18514
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
So that we can e.g. check TLS on multiple ports for a given IP.
Updates tailscale/corp#16367
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I81d840a4c88138de1cbb2032b917741c009470e6
This allows us to check all IP addresses (and address families) for a
given DNS hostname while dynamically discovering new IPs and removing
old ones as they're no longer valid.
Also add a testable example that demonstrates how to use it.
Alternative to #11610
Updates tailscale/corp#16367
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I6d6f39bafc30e6dfcf6708185d09faee2a374599
This change updates all tailfs functions and the majority of the tailfs
variables to use the new drive naming.
Updates tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
I originally came to update this to match the documented behavior, but
the code is deliberately avoiding this behavior currently, making it
hard to decide how to update this. For now just align the documentation
to the behavior.
Updates #cleanup
Signed-off-by: James Tucker <james@tailscale.com>
This change updates the tailfs file and package names to their new
naming convention.
Updates #tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Refactor the interaction between caller/library when establishing the
HTTP to HTTPS redirects by moving the call to http.Serve into safeweb.
This makes linting for other uses of http.Serve easier without having to
account for false positives created by the old interface.
Updates https://github.com/tailscale/corp/issues/8027
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
We now allow some more ICMP errors to flow, specifically:
- ICMP parameter problem in both IPv4 and IPv6 (corrupt headers)
- ICMP Packet Too Big (for IPv6 PMTU)
Updates #311
Updates #8102
Updates #11002
Signed-off-by: James Tucker <james@tailscale.com>
MSS clamping for nftables was mostly not ran due to to an earlier rule in the FORWARD chain issuing accept verdict.
This commit places the clamping rule into a chain of its own to ensure that it gets ran.
Updates tailscale/tailscale#11002
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This is based on empirical testing using actual logs data.
FastestCompression only incurs a marginal <1% compression ratio hit
for a 2.25x reduction in memory use for small payloads
(which are common if log uploads happen at a decently high frequency).
The memory savings for large payloads is much lower
(less than 1.1x reduction).
LowMemory only incurs a marginal <5% hit on performance
for a 1.6-2.0x reduction in memory use for small or large payloads.
The memory gains for both settings justifies the loss of benefits,
which are arguably minimal.
tailscale/corp#18514
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
We're tracking down a new instance of memory usage, and excessive memory usage
from sockstats is definitely not going to help with debugging, so disable it by
default on mobile.
Updates tailscale/corp#18514
Signed-off-by: James Tucker <james@tailscale.com>
When both muxes match, and one of them is a wildcard "/" pattern (which
is common in browser muxes), choose the more specific pattern.
If both are non-wildcard matches, there is a pattern overlap, so return
an error.
Updates https://github.com/tailscale/corp/issues/8027
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
We have hosts that support IPv6, but not IPv6 firewall configuration
in iptables mode.
We also have hosts that have some support for IPv6 firewall
configuration in iptables mode, but do not have iptables filter table.
We should:
- configure ip rules for all hosts that support IPv6
- only configure firewall rules in iptables mode if the host
has iptables filter table.
Updates tailscale/tailscale#11540
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Allow the use of inline styles with safeweb via an opt-in configuration
item. This will append `style-src "self" "unsafe-inline"` to the default
CSP. The `style-src` directive will be used in lieu of the fallback
`default-src "self"` directive.
Updates tailscale/corp#8027
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
Some of our labels contain UTF-8 and get mojibaked in the browser
right now.
Updates tailscale/corp#18687
Change-Id: I6069cffd6cc8813df415f06bb308bc2fc3ab65c4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The initial control client request can get stuck in the event that a
connection is established but then lost part way through, without any
ICMP or RST. Ensure that the control client will be restarted by timing
out that initial request as well.
Fixes#11542
Signed-off-by: James Tucker <james@tailscale.com>
* cmd/k8s-nameserver,k8s-operator: add a nameserver that can resolve ts.net DNS names in cluster.
Adds a simple nameserver that can respond to A record queries for ts.net DNS names.
It can respond to queries from in-memory records, populated from a ConfigMap
mounted at /config. It dynamically updates its records as the ConfigMap
contents changes.
It will respond with NXDOMAIN to queries for any other record types
(AAAA to be implemented in the future).
It can respond to queries over UDP or TCP. It runs a miekg/dns
DNS server with a single registered handler for ts.net domain names.
Queries for other domain names will be refused.
The intended use of this is:
1) to allow non-tailnet cluster workloads to talk to HTTPS tailnet
services exposed via Tailscale operator egress over HTTPS
2) to allow non-tailnet cluster workloads to talk to workloads in
the same cluster that have been exposed to tailnet over their
MagicDNS names but on their cluster IPs.
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator/deploy/crds,k8s-operator: add DNSConfig CustomResource Definition
DNSConfig CRD can be used to configure
the operator to deploy kube nameserver (./cmd/k8s-nameserver) to cluster.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator,k8s-operator: optionally reconcile nameserver resources
Adds a new reconciler that reconciles DNSConfig resources.
If a DNSConfig is deployed to cluster,
the reconciler creates kube nameserver resources.
This reconciler is only responsible for creating
nameserver resources and not for populating nameserver's records.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/{k8s-operator,k8s-nameserver}: generate DNSConfig CRD for charts, append to static manifests
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
---------
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Updates #cleanup
Change the return type of the safeweb.RedirectHTTP method to a handler
that can be passed directly to http.Serve without any http.HandlerFunc
wrapping necessary.
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
This CONNECT client doesn't match what Go's net/http.Transport does
(making the two values match). This makes it match.
This is all pretty unspecified but most clients & doc examples show
these matching. And some proxy implementations (such as Zscaler) care.
Updates tailscale/corp#18716
Change-Id: I135c5facbbcec9276faa772facbde1bb0feb2d26
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
