iOS and Android no longer use these. They both now (as of today)
use the hostinfo.SetFoo setters instead.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Turns out the iOS client has been only sending the OS version it first
started at. This whole hostinfo-via-prefs mechanism was never a good idea.
Start removing it.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This fixes "tailscale cert" on Synology where the var directory is
typically like /volume2/@appdata/Tailscale, or any other tailscaled
user who specifies a non-standard state file location.
This is a interim fix on the way to #2932.
Fixes#2927
Updates #2932
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We unconditionally set appropriate perms on the statefile dir.
We look at the basename of the statefile dir, and if it is "tailscale", then
we set perms as appropriate.
Fixes#2925
Updates #2856
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This was already possible on Linux if you ran tailscaled with --debug
(which runs net/http/pprof), but it requires the user have the Go
toolchain around.
Also, it wasn't possible on macOS, as there's no way to run the IPNExtension
with a debug server (it doesn't run tailscaled).
And on Windows it's super tedious: beyond what users want to do or
what we want to explain.
Instead, put it in "tailscale debug" so it works and works the same on
all platforms. Then we can ask users to run it when we're debugging something
and they can email us the output files.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
ProgramData has a permissive ACL. For us to safely store machine-wide
state information, we must set a more restrictive ACL on our state directory.
We set the ACL so that only talescaled's user (ie, LocalSystem) and the
Administrators group may access our directory.
We must include Administrators to ensure that logs continue to be easily
accessible; omitting that group would force users to use special tools to
log in interactively as LocalSystem, which is not ideal.
(Note that the ACL we apply matches the ACL that was used for LocalSystem's
AppData\Local).
There are two cases where we need to reset perms: One is during migration
from the old location to the new. The second case is for clean installations
where we are creating the file store for the first time.
Updates #2856
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
tailscale-ipn.exe (the GUI) shouldn't use C:\ProgramData.
Also, migrate the earlier misnamed wg32/wg64 conf files if they're present.
(That was stopped in 2db877caa3, but the
files exist from fresh 1.14 installs)
Updates #2856
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
C:\WINDOWS\system32\config\systemprofile\AppData\Local\
is frequently cleared for almost any reason: Windows updates,
System Restore, even various System Cleaner utilities.
The server-state.conf file in AppData\Local could be deleted
at any time, which would break login until the node is removed
from the Admin Panel allowing it to create a new key.
Carefully copy any AppData state to ProgramData at startup.
If copying the state fails, continue to use AppData so at
least there will be connectivity. If there is no state,
use ProgramData.
We also migrate the log.conf file. Very old versions of
Tailscale named the EXE tailscale-ipn, so the log conf was
tailscale-ipn.log.conf and more recent versions preserved
this filename and cmdName in logs. In this migration we
always update the filename to
c:\ProgramData\Tailscale\tailscaled.log.conf
Updates https://github.com/tailscale/tailscale/issues/2856
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
So if the control plane knows that something's broken about the node, it can
include problem(s) in MapResponse and "tailscale status" will show it.
(and GUIs in the future, as it's in ipnstate.Status/JSON)
This also bumps the MapRequest.Version, though it's not strictly
required. Doesn't hurt.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
LocalBackend.Shutdown's docs say:
> The backend can no longer be used after Shutdown returns.
Nevertheless, TestStateMachine blithely calls Shutdown, talks some smack,
and continues on, expecting things to work. Other uses of Shutdown
in the codebase are as intended.
Things mostly kinda work anyway, except that the wgengine.Engine has been
shut down, so calls to Reconfig fail. Those get logged:
> local.go:603: wgengine status error: engine closing; no status
but otherwise ignored.
However, the Reconfig failure caused one fewer call to pause/unpause
than normal. Now the assertCalls lines match the equivalent ones
earlier in the test.
I don't see an obvious correct replacement for Shutdown in the context
of this test; I'm not sure entirely what it is trying to accomplish.
It is possible that many of the tests remaining after the prior call
to Shutdown are now extraneous. They don't harm anything, though,
so err on the side of safety and leave them for now.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Use helpers and variadic functions to make the call sites
a lot easier to read, since they occur a lot.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Concurrent calls to LocalBackend.setWgengineStatus
could result in some of the status updates being dropped.
This was exacerbated by 92077ae78c,
which increases the probability of concurrent status updates,
causing test failures (tailscale/corp#2579).
It's going to take a bit of work to fix this test.
The ipnlocal state machine is difficult to reason about,
particularly in the face of concurrency.
We could fix the test trivially by throwing a new mutex around
setWgengineStatus to serialize calls to it,
but I'd like to at least try to do better than cosmetics.
In the meantime, commit the test.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Spelling out the command to run for every type
means that changing the command makes for a large, repetitive diff.
Stop doing that.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
In prep for other bug fixes & tests. It's hard to test when it was
intermingled into LocalBackend.authReconfig.
Now it's a pure function.
And rename variable 'uc' (user config?) to the since idiomatic
'prefs'.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We currently plumb full URLs for DNS resolvers from the control server
down to the client. But when we pass the values into the net/dns
package, we throw away any URL that isn't a bare IP. This commit
continues the plumbing, and gets the URL all the way to the built in
forwarder. (It stops before plumbing URLs into the OS configurations
that can handle them.)
For #2596
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
And in the process, fix the related confusing error messages from
pinging your own IP or hostname.
Fixes#2803
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* Revert "Revert "types/key: add MachinePrivate and MachinePublic.""
This reverts commit 61c3b98a24.
Signed-off-by: David Anderson <danderson@tailscale.com>
* types/key: add ControlPrivate, with custom serialization.
ControlPrivate is just a MachinePrivate that serializes differently
in JSON, to be compatible with how the Tailscale control plane
historically serialized its private key.
Signed-off-by: David Anderson <danderson@tailscale.com>
Plumb throughout the codebase as a replacement for the mixed use of
tailcfg.MachineKey and wgkey.Private/Public.
Signed-off-by: David Anderson <danderson@tailscale.com>
And add health check errors to ipnstate.Status (tailscale status --json).
Updates #2746
Updates #2775
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The number of packet filters can grow very large,
so this log entry can be very large.
We can get the packet filter server-side,
so reduce verbosity here to just the number of filters present.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
