I updated the address parsing stuff to return a specific error for
unspecified hosts passed as empty strings, and look for that
when logging errors. I explicitly did not make parseAddress return a
netip.Addr containing an unspecified address because at this layer,
in the absence of any host, we don't necessarily know the address
family we're dealing with.
For the purposes of this code I think this is fine, at least until
we implement #12588.
Fixes#12979
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
It seems some security software or macOS itself might be MITMing TLS
(for ScreenTime?), so don't warn unless it fails x509 validation
against system roots.
Updates #3198
Change-Id: I6ea381b5bb6385b3d51da4a1468c0d803236b7bf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This commit implements TCP GSO for packets being read from gVisor on
Linux. Windows support will follow later. The wireguard-go dependency is
updated in order to make use of newly exported GSO logic from its tun
package.
A new gVisor stack.LinkEndpoint implementation has been established
(linkEndpoint) that is loosely modeled after its predecessor
(channel.Endpoint). This new implementation supports GSO of monster TCP
segments up to 64K in size, whereas channel.Endpoint only supports up to
32K. linkEndpoint will also be required for GRO, which will be
implemented in a follow-on commit.
TCP throughput from gVisor, i.e. TUN read direction, is dramatically
improved as a result of this commit. Benchmarks show substantial
improvement through a wide range of RTT and loss conditions, sometimes
as high as 5x.
The iperf3 results below demonstrate the effect of this commit between
two Linux computers with i5-12400 CPUs. There is roughly ~13us of round
trip latency between them.
The first result is from commit 57856fc without TCP GSO.
Starting Test: protocol: TCP, 1 streams, 131072 byte blocks
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 2.51 GBytes 2.15 Gbits/sec 154 sender
[ 5] 0.00-10.00 sec 2.49 GBytes 2.14 Gbits/sec receiver
The second result is from this commit with TCP GSO.
Starting Test: protocol: TCP, 1 streams, 131072 byte blocks
- - - - - - - - - - - - - - - - - - - - - - - - -
Test Complete. Summary Results:
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 12.6 GBytes 10.8 Gbits/sec 6 sender
[ 5] 0.00-10.00 sec 12.6 GBytes 10.8 Gbits/sec receiver
Updates #6816
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Fixestailscale/tailscale#12973
Updates tailscale/tailscale#1634
There was a logic issue in the captive detection code we shipped in https://github.com/tailscale/tailscale/pull/12707.
Assume a captive portal has been detected, and the user notified. Upon switching to another Wi-Fi that does *not* have a captive portal, we were issuing a signal to interrupt any pending captive detection attempt. However, we were not also setting the `captive-portal-detected` warnable to healthy. The result was that any "captive portal detected" alert would not be cleared from the UI.
Also fixes a broken log statement value.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
fixes tailscale#12968
The dns manager cleanup func was getting passed a nil
health tracker, which will panic. Fixed to pass it
the system health tracker.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
It is no longer correct to state that we don't support running Tailscale in containers or on Kubernetes.
Updates tailscale/tailscale#12842
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Add a warning that the Dockerfile in the OSS repo is not the
currently used mechanism to build the images we publish - for folks
who want to contribute to image build scripts or otherwise need to
understand the image build process that we use.
Updates#cleanup
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
All wasi* are GOARCH wasm, so check that instead.
Updates #12732
Change-Id: Id3cc346295c1641bcf80a6c5eb1ad65488509656
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
updates tailscale/corp#21823
Misconfigured, broken, or blocked DNS will often present as
"internet is broken'" to the end user. This plumbs the health tracker
into the dns manager and forwarder and adds a health warning
with a 5 second delay that is raised on failures in the forwarder and
lowered on successes.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
This picks up https://github.com/tailscale/xnet/pull/1 so that
clients can move files even when holding only a lock for the source
file.
Updates #12941
Signed-off-by: Percy Wegmann <percy@tailscale.com>
cmd/k8s-operator,k8s-operator/sessionrecording,sessionrecording,ssh/tailssh: refactor session recording functionality
Refactor SSH session recording functionality (mostly the bits related to
Kubernetes API server proxy 'kubectl exec' session recording):
- move the session recording bits used by both Tailscale SSH
and the Kubernetes API server proxy into a shared sessionrecording package,
to avoid having the operator to import ssh/tailssh
- move the Kubernetes API server proxy session recording functionality
into a k8s-operator/sessionrecording package, add some abstractions
in preparation for adding support for a second streaming protocol (WebSockets)
Updates tailscale/corp#19821
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Allows the use of tsweb.LogHandler exclusively for callbacks describing the
handler HTTP requests.
Fixes#12837
Signed-off-by: Paul Scott <paul@tailscale.com>
Re-instates the functionality that generates CRD API docs, but using
a different library as the one we were using earlier seemed to have
some issues with its Git history.
Also regenerates the docs (make kube-generate-all).
Updates tailscale/tailscale#12859
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Remove the restriction that getent is skipped on non-Linux unixes.
Improve validation of the parsed output from getent, in case unknown
systems return unusable information.
Fixes#12730.
Signed-off-by: Ross Williams <ross@ross-williams.net>
Updates tailscale/corp#21949
As discussed with @raggi, this PR updates the static DERPMap embedded in the client to reflect the availability of HTTP on the DERP servers run by Tailscale.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Updates tailscale/tailscale#1634
This PR introduces a new `captive-portal-detected` Warnable which is set to an unhealthy state whenever a captive portal is detected on the local network, preventing Tailscale from connecting.
ipn/ipnlocal: fix captive portal loop shutdown
Change-Id: I7cafdbce68463a16260091bcec1741501a070c95
net/captivedetection: fix mutex misuse
ipn/ipnlocal: ensure that we don't fail to start the timer
Change-Id: I3e43fb19264d793e8707c5031c0898e48e3e7465
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
wgengine/magicsock,ipn: allow setting static node endpoints via tailscaled config file.
Adds a new StaticEndpoints field to tailscaled config
that can be used to statically configure the endpoints
that the node advertizes. This field will replace
TS_DEBUG_PRETENDPOINTS env var that can be used to achieve the same.
Additionally adds some functionality that ensures that endpoints
are updated when configfile is reloaded.
Also, refactor configuring/reconfiguring components to use the
same functionality when configfile is parsed the first time or
subsequent times (after reload). Previously a configfile reload
did not result in resetting of prefs. Now it does- but does not yet
tell the relevant components to consume the new prefs. This is to
be done in a follow-up.
Updates tailscale/tailscale#12578
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
It is sometimes necessary to change a global lazy.SyncValue for the duration of a test. This PR adds a (*SyncValue[T]).SetForTest method to facilitate that.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
The standard library includes these for strings and byte slices,
but it lacks similar functions for generic slices of comparable types.
Although they are not as commonly used, these functions are useful
in scenarios such as working with field index sequences (i.e., []int)
via reflection.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This adds support for container-like types such as Container[T] that
don't explicitly specify a view type for T. Instead, a package implementing
a container type should also implement and export a ContainerView[T, V] type
and a ContainerViewOf(*Container[T]) ContainerView[T, V] function, which
returns a view for the specified container, inferring the element view type V
from the element type T.
Updates #12736
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Some users run "tailscale cert" in a cron job to renew their
certificates on disk. The time until the next cron job run may be long
enough for the old cert to expire with our default heristics.
Add a `--min-validity` flag which ensures that the returned cert is
valid for at least the provided duration (unless it's longer than the
cert lifetime set by Let's Encrypt).
Updates #8725
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Remove fybrik.io/crdoc dependency as it is causing issues for folks attempting
to vendor tailscale using GOPROXY=direct.
This means that the CRD API docs in ./k8s-operator/api.md will no longer
be generated- I am going to look at replacing it with another tool
in a follow-up.
Updates tailscale/tailscale#12859
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Bump node version to latest lts on the 18.x line which is 18.20.4 at the time of writing.
Updates https://github.com/tailscale/corp/issues/21741
Signed-off-by: Mario Minardi <mario@tailscale.com>
Windows requires routes to have a nexthop. Routes created using the interface's local IP address or an unspecified IP address ("0.0.0.0" or "::") as the nexthop are considered on-link routes. Notably, Windows treats on-link subnet routes differently, reserving the last IP in the range as the broadcast IP and therefore prohibiting TCP connections to it, resulting in WSA error 10049: "The requested address is not valid in its context. This does not happen with single-host routes, such as routes to Tailscale IP addresses, but becomes a problem with advertised subnets when all IPs in the range should be reachable.
Before Windows 8, only routes created with an unspecified IP address were considered on-link, so our previous approach of using the interface's own IP as the nexthop likely worked on Windows 7.
This PR updates configureInterface to use the TailscaleServiceIP (100.100.100.100) and its IPv6 counterpart as the nexthop for subnet routes.
Fixestailscale/support-escalations#57
Signed-off-by: Nick Khyl <nickk@tailscale.com>
With this change, the error handling and request logging are all done in defers
after calling inner.ServeHTTP. This ensures that any recovered values which we
want to re-panic with retain a useful stacktrace. However, we now only
re-panic from errorHandler when there's no outside logHandler. Which if you're
using StdHandler there always is. We prefer this to ensure that we are able to
write a 500 Internal Server Error to the client. If a panic hits http.Server
then the response is not sent back.
Updates #12784
Signed-off-by: Paul Scott <paul@tailscale.com>
... and then do approximately nothing with that information, other
than a big TODO. This is mostly me relearning this code and leaving
breadcrumbs for others in the future.
Updates #12724
Signed-off-by: Brad Fitzpatrick <brad@danga.com>
StdHandler/retHandler would previously emit one log line for each request.
If there were multiple StdHandler in the chain, there would be one log line
per instance of retHandler.
With this change, only the outermost StdHandler/logHandler actually logs the
request or invokes OnStart or OnCompletion callbacks. The error-rendering part
of retHandler lives on in errorHandler, and errorHandler passes those errors up
the stack to logHandler through a callback that logHandler places in the
request.Context().
Updates tailscale/corp#19999
Signed-off-by: Paul Scott <paul@tailscale.com>
