This pretty much always results in an outage because peers won't
discover our new home region and thus won't be able to establish
connectivity.
Updates tailscale/corp#18095
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ic0d09133f198b528dd40c6383b16d7663d9d37a7
Since link-local addresses are definitionally more likely to be a direct
(lower-latency, more reliable) connection than a non-link-local private
address, give those a bit of a boost when selecting endpoints.
Updates #8097
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I93fdeb07de55ba39ba5fcee0834b579ca05c2a4e
This adds a method to wgengine.Engine and plumbed down into magicsock
to add a way to get a type-safe Tailscale-safe wrapper around a
wireguard-go device.Peer that only exposes methods that are safe for
Tailscale to use internally.
It also removes HandshakeAttempts from PeerStatusLite that was just
added as it wasn't needed yet and is now accessible ala cart as needed
from the Peer type accessor.
None of this is used yet.
Updates #7617
Change-Id: I07be0c4e6679883e6eeddf8dbed7394c9e79c5f4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This commit implements probing of UDP path lifetime on the tail end of
an active direct connection. Probing configuration has two parts -
Cliffs, which are various timeout cliffs of interest, and
CycleCanStartEvery, which limits how often a probing cycle can start,
per-endpoint. Initially a statically defined default configuration will
be used. The default configuration has cliffs of 10s, 30s, and 60s,
with a CycleCanStartEvery of 24h. Probing results are communicated via
clientmetric counters. Probing is off by default, and can be enabled
via control knob. Probing is purely informational and does not yet
drive any magicsock behaviors.
Updates #540
Signed-off-by: Jordan Whited <jordan@tailscale.com>
The switch in Conn.runDerpReader() on the derp.ReceivedMessage type
contained cases other than derp.ReceivedPacket that fell through to
writing to c.derpRecvCh, which should only be reached for
derp.ReceivedPacket. This can result in the last/previous
derp.ReceivedPacket to be re-handled, effectively creating a duplicate
packet. If the last derp.ReceivedPacket happens to be a
disco.CallMeMaybe it may result in a disco ping scan towards the
originating peer on the endpoints contained.
The change in this commit moves the channel write on c.derpRecvCh and
subsequent select awaiting the result into the derp.ReceivedMessage
case, preventing it from being reached from any other case. Explicit
continue statements are also added to non-derp.ReceivedPacket cases
where they were missing, in order to signal intent to the reader.
Fixes#10586
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This uses the fact that we've received a frame from a given DERP region
within a certain time as a signal that the region is stil present (and
thus can still be a node's PreferredDERP / home region) even if we don't
get a STUN response from that region during a netcheck.
This should help avoid DERP flaps that occur due to losing STUN probes
while still having a valid and active TCP connection to the DERP server.
RELNOTE=Reduce home DERP flapping when there's still an active connection
Updates #8603
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: If7da6312581e1d434d5c0811697319c621e187a0
* util/linuxfw, wgengine: allow ingress to magicsock UDP port on Linux
Updates #9084.
Currently, we have to tell users to manually open UDP ports on Linux when
certain firewalls (like ufw) are enabled. This change automates the process of
adding and updating those firewall rules as magicsock changes what port it
listens on.
Signed-off-by: Naman Sood <mail@nsood.in>
In DERP homeless mode, a DERP home connection is not sought or
maintained and the local node is not reachable.
Updates #3363
Updates tailscale/corp#396
Change-Id: Ibc30488ac2e3cfe4810733b96c2c9f10a51b8331
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is gated behind the silent disco control knob, which is still in
its infancy. Prior to this change disco pong reception was the only
event that could move trustBestAddrUntil forward, so even though we
weren't heartbeating, we would kick off discovery pings every
trustUDPAddrDuration and mirror to DERP.
Updates #540
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This change exposes SilentDisco as a control knob, and plumbs it down to
magicsock.endpoint. No changes are being made to magicsock.endpoint
disco behavior, yet.
Updates #540
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This change updates log messaging when cleaning up wireguard only peers.
This change also stops us unnecessarily attempting to clean up disco
pings for wireguard only endpoints.
Updates #7826
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
TestNewConn now passes as root on Linux. It wasn't closing the BPF
listeners and their goroutines.
The code is still a mess of two Close overlapping code paths, but that
can be refactored later. For now, make the two close paths more similar.
Updates #9945
Change-Id: I8a3cf5fb04d22ba29094243b8e645de293d9ed85
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Don't assume Linux lacks UDP_GRO support if it lacks UDP_SEGMENT
support. This mirrors a similar change in wireguard/wireguard-go@177caa7
for consistency sake. We haven't found any issues here, just being
overly paranoid.
Updates #cleanup
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Regression from c15997511d. The callback could be run multiple times
from different endpoints.
Fixes#9801
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Record the number of MTU probes sent, the total bytes sent, the number of times
we got a successful return from an MTU probe of a particular size, and the max
MTU recorded.
Updates #311
Signed-off-by: Val <valerie@tailscale.com>
Automatically probe the path MTU to a peer when peer MTU is enabled, but do not
use the MTU information for anything yet.
Updates #311
Signed-off-by: Val <valerie@tailscale.com>
When sending a CLI ping with a specific size, continue to probe all possible UDP
paths to the peer until we find one with a large enough MTU to accommodate the
ping. Record any peer path MTU information we discover (but don't use it for
anything other than CLI pings).
Updates #311
Signed-off-by: Val <valerie@tailscale.com>
Add a field to record the wire MTU of the path to this address to the
addrLatency struct and rename it addrQuality.
Updates #311
Signed-off-by: Val <valerie@tailscale.com>
Prepare for path MTU discovery by splitting up the concept of
DefaultMTU() into the concepts of the Tailscale TUN MTU, MTUs of
underlying network interfaces, minimum "safe" TUN MTU, user configured
TUN MTU, probed path MTU to a peer, and maximum probed MTU. Add a set
of likely MTUs to probe.
Updates #311
Signed-off-by: Val <valerie@tailscale.com>
Prepare for path MTU discovery by splitting up the concept of
DefaultMTU() into the concepts of the Tailscale TUN MTU, MTUs of
underlying network interfaces, minimum "safe" TUN MTU, user configured
TUN MTU, probed path MTU to a peer, and maximum probed MTU. Add a set
of likely MTUs to probe.
Updates #311
Signed-off-by: Val <valerie@tailscale.com>
Replace CanPMTUD() with ShouldPMTUD() to check if peer path MTU discovery should
be enabled, in preparation for adding support for enabling/disabling peer MTU
dynamically.
Updated #311
Signed-off-by: Val <valerie@tailscale.com>
Add an enable/disable argument to setDontFragment() in preparation for dynamic
enable/disable of peer path MTU discovery. Add getDontFragment() to get the
status of the don't fragment bit from a socket.
Updates #311
Co-authored-by: James Tucker <james@tailscale.com>
Signed-off-by: Val <valerie@tailscale.com>
Use IPV6_MTU_DISCOVER for setting don't fragment on IPv6 sockets on Linux (was
using IP_MTU_DISCOVER, the IPv4 arg).
Updates #311
Signed-off-by: Val <valerie@tailscale.com>
Make the debugknob variable name for enabling peer path MTU discovery match the
env variable name.
Updates #311
Signed-off-by: Val <valerie@tailscale.com>
And convert all callers over to the methods that check SelfNode.
Now we don't have multiple ways to express things in tests (setting
fields on SelfNode vs NetworkMap, sometimes inconsistently) and don't
have multiple ways to check those two fields (often only checking one
or the other).
Updates #9443
Change-Id: I2d7ba1cf6556142d219fae2be6f484f528756e3c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
NetworkMap.Addresses is redundant with the SelfNode.Addresses. This
works towards a TODO to delete NetworkMap.Addresses and replace it
with a method.
This is similar to #9389.
Updates #cleanup
Change-Id: Id000509ca5d16bb636401763d41bdb5f38513ba0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
LocalBackend can talk to magicsock on its own to do this without
the "Engine" being involved.
(Continuing a little side quest of cleaning up the Engine
interface...)
Updates #cleanup
Change-Id: I8654acdca2b883b1bd557fdc0cfb90cd3a418a62
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Currently only the top four most popular changes: endpoints, DERP
home, online, and LastSeen.
Updates #1909
Change-Id: I03152da176b2b95232b56acabfb55dcdfaa16b79
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We're trying to start using that monster type less and eventually get
rid of it.
Updates #1909
Change-Id: I8e1e725bce5324fb820a9be6c7952767863e6542
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
