Makes it cheaper/simpler to persist values, and encourages reuse of
labels as opposed to generating an arbitrary number.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Despite the fact that WSL configuration is still disabled by default, we
continue to log the machine's list of WSL distros as a diagnostic measure.
Unfortunately I have seen the "wsl.exe -l" command hang indefinitely. This patch
adds a (more than reasonable) 10s timeout to ensure that tailscaled does not get
stuck while executing this operation.
I also modified the Windows implementation of NewOSConfigurator to do the
logging asynchronously, since that information is not required in order to
continue starting up.
Fixes#7476
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Conforms to RFC 1929.
To support Java HTTP clients via libtailscale, who offer no other
reliable hooks into their sockets.
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
Per a packet capture provided, some gateways will reply to a UPnP
discovery packet with a UDP packet with a source port that does not come
from the UPnP port. Accept these packets with a log message.
Updates #7377
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I5d4d5b2a0275009ed60f15c20b484fe2025d094b
We were previously sending a lower-case "udp" protocol, whereas other
implementations like miniupnp send an upper-case "UDP" protocol. For
compatibility, use an upper-case protocol instead.
Updates #7377
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I4aed204f94e4d51b7a256d29917af1536cb1b70f
Some devices don't let you UPnP portmap a port below 1024, so let's just
avoid that range of ports entirely.
Updates #7377
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ib7603b1c9a019162cdc4fa21744a2cae48bb1d86
Return a mock set of interfaces and a mock gateway during this test and
verify that LikelyHomeRouterIP returns the outcome we expect. Also
verify that we return an error if there are no IPv4 addresses available.
Follow-up to #7447
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8f06989e7f1f0bebd108861cbff17b820ed2e6e4
We have many function pointers that we replace for the duration of test and
restore it on test completion, add method to do that.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We weren't filtering out IPv6 addresses from this function, so we could
be returning an IPv4 gateway IP and an IPv6 self IP. Per the function
comments, only return IPv4 addresses for the self IP.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: If19a4aadc343fbd4383fc5290befa0eff006799e
Now that we're using rand.Shuffle in a few locations, create a generic
shuffle function and use it instead. While we're at it, move the
interleaveSlices function to the same package for use.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I0b00920e5b3eea846b6cedc30bd34d978a049fd3
The debug flag on tailscaled isn't available in the macOS App Store
build, since we don't have a tailscaled binary; move it to the
'tailscale debug' CLI that is available on all platforms instead,
accessed over LocalAPI.
Updates #7377
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I47bffe4461e036fab577c2e51e173f4003592ff7
Followup to #7177 to avoid adding extra dependencies to the CLI. We
instead declare an interface for the link monitor.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This ensures that we're trying multiple returned IPs, since the DERP
servers return the same response to all queries. This should increase
the chances that we eventually reach a working IP.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ie8d4fb93df96da910fae49ae71bf3e402b9fdecc
Uses the hooks added by tailscale/go#45 to instrument the reads and
writes on the major code paths that do network I/O in the client. The
convention is to use "<package>.<type>:<label>" as the annotation for
the responsible code path.
Enabled on iOS, macOS and Android only, since mobile platforms are the
ones we're most interested in, and we are less sensitive to any
throughput degradation due to the per-I/O callback overhead (macOS is
also enabled for ease of testing during development).
For now just exposed as counters on a /v0/sockstats PeerAPI endpoint.
We also keep track of the current interface so that we can break out
the stats by interface.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Exposes the delegated interface data added by #7248 in the debug
endpoint. I would have found it useful when working on that PR, and
it may be handy in the future as well.
Also makes the interfaces table slightly easier to parse by adding
borders to it. To make then nicer-looking, the CSP was relaxed to allow
inline styles.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
With #6566 we added an external mechanism for getting the default
interface, and used it on macOS and iOS (see tailscale/corp#8201).
The goal was to be able to get the default physical interface even when
using an exit node (in which case the routing table would say that the
Tailscale utun* interface is the default).
However, the external mechanism turns out to be unreliable in some
cases, e.g. when multiple cellular interfaces are present/toggled (I
have occasionally gotten my phone into a state where it reports the pdp_ip1
interface as the default, even though it can't actually route traffic).
It was observed that `ifconfig -v` on macOS reports an "effective interface"
for the Tailscale utn* interface, which seems promising. By examining
the ifconfig source code, it turns out that this is done via a
SIOCGIFDELEGATE ioctl syscall. Though this is a private API, it appears
to have been around for a long time (e.g. it's in the 10.13 xnu release
at https://opensource.apple.com/source/xnu/xnu-4570.41.2/bsd/net/if_types.h.auto.html)
and thus is unlikely to go away.
We can thus use this ioctl if the routing table says that a utun*
interface is the default, and go back to the simpler mechanism that
we had before #6566.
Updates #7184
Updates #7188
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
As part of the work on #7248 I wanted to know all of the flags on the
RouteMessage struct that we get back from macOS. Though it doesn't turn
out to be useful (when using an exit node/Tailscale is the default route,
the flags for the physical interface routes are the same), it still seems
useful from a debugging/comprehensiveness perspective.
Adds additional Darwin flags that were output once I enabled this mode.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
With #6566 we started to more aggressively bind to the default interface
on Darwin. We are seeing some reports of the wrong cellular interface
being chosen on iOS. To help with the investigation, this adds to knobs
to control the behavior changes:
- CapabilityDebugDisableAlternateDefaultRouteInterface disables the
alternate function that we use to get the default interface on macOS
and iOS (implemented in tailscale/corp#8201). We still log what it
would have returned so we can see if it gets things wrong.
- CapabilityDebugDisableBindConnToInterface is a bigger hammer that
disables binding of connections to the default interface altogether.
Updates #7184
Updates #7188
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
It was originally added to control memory use on iOS (#2490), but then
was relaxed conditionally when running on iOS 15 (#3098). Now that we
require iOS 15, there's no need for the limit at all, so simplify back
to the original state.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
GetProxyConnectHeader (golang/go#41048) was upstreamed in Go 1.16 and
OnProxyConnectResponse (golang/go#54299) in Go 1.20, thus we no longer
need to guard their use by the tailscale_go build tag.
Updates #7123
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Add the envknob TS_DEBUG_EXIT_NODE_DNS_NET_PKG, which enables more
verbose debug logging when calling the handleExitNodeDNSQueryWithNetPkg
function. This function is currently only called on Windows and Android.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ieb3ca7b98837d7dc69cd9ca47609c1c52e3afd7b
When we make a connection to a server, we previously would verify with
the system roots, and then fall back to verifying with our baked-in
Let's Encrypt root if the system root cert verification failed.
We now explicitly check for, and log a health error on, self-signed
certificates. Additionally, we now always verify against our baked-in
Let's Encrypt root certificate and log an error if that isn't
successful. We don't consider this a health failure, since if we ever
change our server certificate issuer in the future older non-updated
versions of Tailscale will no longer be healthy despite being able to
connect.
Updates #3198
Change-Id: I00be5ceb8afee544ee795e3c7a2815476abc4abf
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Updates #7123
Updates #6257 (more to do in other repos)
Change-Id: I073e2a6d81a5d7fbecc29caddb7e057ff65239d0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Update all code generation tools, and those that check for license
headers to use the new standard header.
Also update copyright statement in LICENSE file.
Fixes#6865
Signed-off-by: Will Norris <will@tailscale.com>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
Follow-up to #7065 with some comments from Brad's review.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ia1219f4fa25479b2dada38ffe421065b408c5954
The API documentation does claim to output empty strings under certain
conditions, but we're sometimes seeing nil pointers in the wild, not empty
strings.
Fixes https://github.com/tailscale/corp/issues/8878
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
When turned on via environment variable (off by default), this will use
the BSD routing APIs to query what interface index a socket should be
bound to, rather than binding to the default interface in all cases.
Updates #5719
Updates #5940
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ib4c919471f377b7a08cd3413f8e8caacb29fee0b
This allows users to temporarily enable/disable dnscache logging via a
new node capability, to aid in debugging strange connectivity issues.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I46cf2596a8ae4c1913880a78d0033f8b668edc08
I typoed/brainoed in the earlier 3582628691
Change-Id: Ic198a6f9911f195d9da9fc5259b5784a4b15e5e3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
01b90df2fa added SCTP support before
(with explicit parsing for ports) and
69de3bf7bf tried to add support for
arbitrary IP protocols (as long as the ACL permited a port of "*",
since we might not know how to find ports from an arbitrary IP
protocol, if it even has such a concept). But apparently that latter
commit wasn't tested end-to-end enough. It had a lot of tests, but the
tests made assumptions about layering that either weren't true, or
regressed since 1.20. Notably, it didn't remove the (*Filter).pre
bidirectional filter that dropped all "unknown" protocol packets both
leaving and entering, even if there were explicit protocol matches
allowing them in.
Also, don't map all unknown protocols to 0. Keep their IP protocol
number parsed so it's matchable by later layers. Only reject illegal
things.
Fixes#6423
Updates #2162
Updates #2163
Change-Id: I9659b3ece86f4db51d644f9b34df78821758842c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Gateway devices operating as an HA pair w/VRRP or CARP may send UPnP
replies from static addresses rather than the floating gateway address.
This commit relaxes our source address verification such that we parse
responses from non-gateway IPs, and re-point the UPnP root desc
URL to the gateway IP. This ensures we are still interfacing with the
gateway device (assuming L2 security intact), even though we got a
root desc from a non-gateway address.
This relaxed handling is required for ANY port mapping to work on certain
OPNsense/pfsense distributions using CARP at the time of writing, as
miniupnpd may only listen on the static, non-gateway interface address
for PCP and PMP.
Fixes#5502
Signed-off-by: Jordan Whited <jordan@tailscale.com>
With a42a594bb3, iOS uses netstack and
hence there are no longer any platforms which use the legacy MagicDNS path. As such, we remove it.
We also normalize the limit for max in-flight DNS queries on iOS (it was 64, now its 256 as per other platforms).
It was 64 for the sake of being cautious about memory, but now we have 50Mb (iOS-15 and greater) instead of 15Mb
so we have the spare headroom.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Go now includes the GOROOT bin directory in $PATH while running tests
and generate, so it is no longer necessary to construct a path using
runtime.GOROOT().
Fixes#6689
Signed-off-by: James Tucker <james@tailscale.com>
