This reverts commit 8d6793fd70.
Reason: breaks Android build (cgo/pthreads addition)
We can try again next cycle.
Change-Id: I5e7e1730a8bf399a8acfce546a6d22e11fb835d5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Attempt to load the xt_mark kernel module when it is not present. If the
load fails, log error information.
It may be tempting to promote this failure to an error once it has been
in use for some time, so as to avoid reaching an error with the iptables
invocation, however, there are conditions under which the two stages may
disagree - this change adds more useful breadcrumbs.
Example new output from tailscaled running under my WSL2:
```
router: ensure module xt_mark: "/usr/sbin/modprobe xt_mark" failed: exit status 1; modprobe: FATAL: Module xt_mark not found in directory /lib/modules/5.10.43.3-microsoft-standard-WSL2
```
Background:
There are two places to lookup modules, one is `/proc/modules` "old",
the other is `/sys/module/` "new".
There was query_modules(2) in linux <2.6, alas, it is gone.
In a docker container in the default configuration, you would get
/proc/modules and /sys/module/ both populated. lsmod may work file,
modprobe will fail with EPERM at `finit_module()` for an unpriviliged
container.
In a priviliged container the load may *succeed*, if some conditions are
met. This condition should be avoided, but the code landing in this
change does not attempt to avoid this scenario as it is both difficult
to detect, and has a very uncertain impact.
In an nspawn container `/proc/modules` is populated, but `/sys/module`
does not exist. Modern `lsmod` versions will fail to gather most module
information, without sysfs being populated with module information.
In WSL2 modules are likely missing, as the in-use kernel typically is
not provided by the distribution filesystem, and WSL does not mount in a
module filesystem of its own. Notably the WSL2 kernel supports iptables
marks without listing the xt_mark module in /sys/module, and
/proc/modules is empty.
On a recent kernel, we can ask the capabilities system about SYS_MODULE,
that will help to disambiguate between the non-privileged container case
and just being root. On older kernels these calls may fail.
Update #4329
Signed-off-by: James Tucker <james@tailscale.com>
We only use the termios subpackage, so we're unaffected by
CVE-2020-7665, but the bump will let dependabot return to slumber.
Fixes https://github.com/tailscale/tailscale/security/dependabot/2
Signed-off-by: James Tucker <james@tailscale.com>
This conforms to the NGINX subrequest result authentication protocol[1]
using the NGINX module `ngx_http_auth_request_module`. This is based on
the example that @peterkeen provided on Twitter[2], but with several
changes to make things more tightly locked down:
* This listens over a UNIX socket instead of a TCP socket to prevent
leakage to the network
* This uses systemd socket activation so that systemd owns the socket
and can then lock down the service to the bare minimum required to do
its job without having to worry about dropping permissions
* This provides additional information in HTTP response headers that can
be useful for integrating with various services
* This has a script to automagically create debian and redhat packages
for easier distribution
This will be written about on the Tailscale blog. There is more
information in README.md.
[1]: https://docs.nginx.com/nginx/admin-guide/security-controls/configuring-subrequest-authentication/
[2]: https://github.com/peterkeen/tailscale/blob/main/cmd/nginx-auth-proxy/nginx-auth-proxy.go
Signed-off-by: Xe Iaso <xe@tailscale.com>
This will enable me to land tests for the upcoming monitor change in
PR #4385.
Update #4385
Update #4282
Signed-off-by: James Tucker <james@tailscale.com>
In tracking down issue #4144 and reading through the netstack code in
detail, I discovered that the packet buf Clone path did not reset the
packetbuf it was getting from the sync.Pool. The fix was sent upstream
https://github.com/google/gvisor/pull/7385, and this bump pulls that in.
At this time there is no known path that this fixes, however at the time
of upstream submission this reset at least one field that could lead to
incorrect packet routing if exercised, a situation that could therefore
lead to an information leak.
Signed-off-by: James Tucker <james@tailscale.com>
While we rearrange/upstream things.
gliderlabs/ssh is forked into tempfork from our prior fork
at be8b7add40
x/crypto/ssh OTOH is forked at
https://github.com/tailscale/golang-x-crypto because it was gnarlier
to vendor with various internal packages, etc.
Its git history shows where it starts (2c7772ba30643b7a2026cbea938420dce7c6384d).
Updates #3802
Change-Id: I546e5cdf831cfc030a6c42557c0ad2c58766c65f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Primarily this is for f375784d83852b1e3ff20cc9de0648b3c0cf8525 and the
related commits that provide buffer pooling for the endpoint code paths
we use.
Signed-off-by: James Tucker <james@tailscale.com>
It includes a fix to allow us to use Go 1.18.
We can now remove our Tailscale-only build tags.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
This is required for staticcheck to process code
using Go 1.18.
This puts us on a random commit on the bleeding edge
of staticcheck, which isn't great, but there don't
appear to have been any releases yet that support 1.18.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Still not sure the exact rules of how/when/who's supposed to set
these, but this works for now on making them match. Baby steps.
Will research more and adjust later.
Updates #4146 (but not enough to fix it, something's still wrong)
Updates #3802
Change-Id: I496d8cd7e31d45fe9ede88fc8894f35dc096de67
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This unbreaks some downstream users of tailscale who end up
with build errors from importing a v0 indirect dependency.
Signed-off-by: David Anderson <danderson@tailscale.com>
Now that Go 1.17 has module graph pruning
(https://go.dev/doc/go1.17#go-command), we should be able to use
upstream netstack without breaking our private repo's build
that then depends on the tailscale.com Go module.
This is that experiment.
Updates #1518 (the original bug to break out netstack to own module)
Updates #2642 (this updates netstack, but doesn't remove workaround)
Change-Id: I27a252c74a517053462e5250db09f379de8ac8ff
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is enough to handle the DNS queries as generated by Go's
net package (which our HTTP/SOCKS client uses), and the responses
generated by the ExitDNS DoH server.
This isn't yet suitable for putting on 100.100.100.100 where a number
of different DNS clients would hit it, as this doesn't yet do
EDNS0. It might work, but it's untested and likely incomplete.
Likewise, this doesn't handle anything about truncation, as the
exchanges are entirely in memory between Go or DoH. That would also
need to be handled later, if/when it's hooked up to 100.100.100.100.
Updates #3507
Change-Id: I1736b0ad31eea85ea853b310c52c5e6bf65c6e2a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
wgengine/wgcfg: introduce wgcfg.NewDevice helper to disable roaming
at all call sites (one real plus several tests).
Fixestailscale/corp#3016.
Signed-off-by: David Anderson <danderson@tailscale.com>
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
github.com/go-multierror/multierror served us well.
But we need a few feature from it (implement Is),
and it's not worth maintaining a fork of such a small module.
Instead, I did a clean room implementation inspired by its API.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Using temporary netlink fork in github.com/tailscale/netlink until we
get the necessary changes upstream in either vishvananda/netlink
or jsimonetti/rtnetlink.
Updates #391
Change-Id: I6e1de96cf0750ccba53dabff670aca0c56dffb7c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
From https://github.com/tailscale/tailscale/pull/1919 with
edits by bradfitz@.
This change introduces a new storage provider for the state file. It
allows users to leverage AWS SSM parameter store natively within
tailscaled, like:
$ tailscaled --state=arn:aws:ssm:eu-west-1:123456789:parameter/foo
Known limitations:
- it is not currently possible to specific a custom KMS key ID
RELNOTE=tailscaled on Linux supports using AWS SSM for state
Edits-By: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Maxime VISONNEAU <maxime.visonneau@gmail.com>
We still try the host's x509 roots first, but if that fails (like if
the host is old), we fall back to using LetsEncrypt's root and
retrying with that.
tlsdial was used in the three main places: logs, control, DERP. But it
was missing in dnsfallback. So added it there too, so we can run fine
now on a machine with no DNS config and no root CAs configured.
Also, move SSLKEYLOGFILE support out of DERP. tlsdial is the logical place
for that support.
Fixes#1609
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Our code is not vulnerable to the issue in question: it only happens in the decompression
path for untrusted inputs, and we only use xz as part of mkpkg, which is write-only
and operates on trusted build system outputs to construct deb and rpm packages.
Still, it's nice to keep the dependabot dashboard clean.
Signed-off-by: David Anderson <danderson@tailscale.com>
In prep for using 1.17 features.
Note the go.mod changes are due to:
https://golang.org/doc/go1.17#go-command
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
rsc.io/goversion is really expensive.
Running version.ReadExe on tailscaled on darwin
allocates 47k objects, almost 11mb.
All we want is the module info. For that, all we need to do
is scan through the binary looking for the magic start/end strings
and then grab the bytes in between them.
We can do that easily and quickly with nothing but a 64k buffer.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Still very much a prototype (hard-coded IPs, etc) but should be
non-invasive enough to submit at this point and iterate from here.
Updates #2589
Co-Author: David Crawshaw <crawshaw@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Prior to Tailscale 1.12 it detected UPnP on any port.
Starting with Tailscale 1.11.x, it stopped detecting UPnP on all ports.
Then start plumbing its discovered Location header port number to the
code that was assuming port 5000.
Fixes#2109
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The kr/pty module moved to creack/pty per the kr/pty README[1].
creack/pty brings in support for a number of OS/arch combos that
are lacking in kr/pty.
Run `go mod tidy` while here.
[1] https://github.com/kr/pty/blob/master/README.md
Signed-off-by: Aaron Bieber <aaron@bolddaemon.com>
This moves the distribution definitions into a maintainable hujson file
instead of just existing as constants in `distros.go`. Comments are
maintained from the inline definitions.
This uses jennifer[1] for hygenic source tree creation. This allows us
to generate a unique top-level test for each VM run. This should
hopefully help make the output of `go test` easier to read.
This also separates each test out into its own top-level test so that we
can better track the time that each distro takes. I really wish there
was a way to have the `test_codegen.go` file _always_ run as a part of
the compile process instead of having to rely on people remembering to
run `go generate`, but I am limited by my tools.
This will let us remove the `-distro-regex` flag and use `go test -run`
to pick which distros are run.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
Add in UPnP portmapping, using goupnp library in order to get the UPnP client and run the
portmapping functions. This rips out anywhere where UPnP used to be in portmapping, and has a
flow separate from PMP and PCP.
RELNOTE=portmapper now supports UPnP mappings
Fixes#682
Updates #2109
Signed-off-by: julianknodt <julianknodt@gmail.com>
This makes integration tests pull pristine VM images from Amazon S3 if
they don't exist on disk. If the S3 fetch fails, it will fall back to
grabbing the image from the public internet. The VM images on the public
internet are known to be updated without warning and thusly change their
SHA256 checksum. This is not ideal for a test that we want to be able to
fire and forget, then run reliably for a very long time.
This requires an AWS profile to be configured at the default path. The
S3 bucket is rigged so that the requester pays. The VM images are
currently about 6.9 gigabytes. Please keep this in mind when running
these tests on your machine.
Documentation was added to the integration test folder to aid others in
running these tests on their machine.
Some wording in the logs of the tests was altered.
Updates #1988
Signed-off-by: Christine Dodrill <xe@tailscale.com>
The OpenSUSE 15.1 image we are using (and conseqentially the only one
that is really available easily given it is EOL) has cloud-init
hardcoded to use the OpenStack metadata thingy. Other OpenSUSE Leap
images function fine with the NoCloud backend, but this one seems to
just not work with it. No bother, we can just pretend to be OpenStack.
Thanks to Okami for giving me an example OpenStack configuration seed
image.
Updates #1988
Signed-off-by: Christine Dodrill <xe@tailscale.com>
Instead of pulling packages from pkgs.tailscale.com, we should use the
tailscale binaries that are local to this git commit. This exposes a bit
of the integration testing stack in order to copy the binaries
correctly.
This commit also bumps our version of github.com/pkg/sftp to the latest
commit.
If you run into trouble with yaml, be sure to check out the
commented-out alpine linux image complete with instructions on how to
use it.
Updates #1988
Signed-off-by: Christine Dodrill <xe@tailscale.com>
The cyolosecurity fork of certstore did not update its module name and
thus can only be used with a replace directive. This interferes with
installing using `go install` so I created a tailscale fork with an
updated module name.
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
This will spin up a few vms and then try and make them connect to a
testcontrol server.
Updates #1988
Signed-off-by: Christine Dodrill <xe@tailscale.com>
Pull in the latest version of wireguard-windows.
Switch to upstream wireguard-go.
This requires reverting all of our import paths.
Unfortunately, this has to happen at the same time.
The wireguard-go change is very low risk,
as that commit matches our fork almost exactly.
(The only changes are import paths, CI files, and a go.mod entry.)
So if there are issues as a result of this commit,
the first place to look is wireguard-windows changes.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
At the start of a dev cycle we'll upgrade all dependencies.
Done with:
$ for Dep in $(cat go.mod | perl -ne '/(\S+) v/ and print "$1\n"'); do go get $Dep@upgrade; done
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Our wireguard-go fork used different values from upstream for
package device's memory limits on iOS.
This was the last blocker to removing our fork.
These values are now vars rather than consts for iOS.
c27ff9b9f6
Adjust them on startup to our preferred values.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Per discussion, we want to have only one test assertion library,
and we want to start by exploring quicktest.
This was a mostly mechanical translation.
I think we could make this nicer by defining a few helper
closures at the beginning of the test. Later.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
A very long unit test that verifies the way the controlclient and
ipn.Backend interact.
This is a giant sequential test of the state machine. The test passes,
but only because it's asserting all the wrong behaviour. I marked all
the behaviour I think is wrong with BUG comments, and several
additional test opportunities with TODO.
Note: the new test supercedes TestStartsInNeedsLoginState, which was
checking for incorrect behaviour (although the new test still checks
for the same incorrect behaviour) and assumed .Start() would converge
before returning, which it happens to do, but only for this very
specific case, for the current implementation. You're supposed to wait
for the notifications.
Updates: tailscale/corp#1660
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
Upstream wireguard-go has changed its receive model.
NewDevice now accepts a conn.Bind interface.
The conn.Bind is stateless; magicsock.Conns are stateful.
To work around this, we add a connBind type that supports
cheap teardown and bring-up, backed by a Conn.
The new conn.Bind allows us to specify a set of receive functions,
rather than having to shoehorn everything into ReceiveIPv4 and ReceiveIPv6.
This lets us plumbing DERP messages directly into wireguard-go,
instead of having to mux them via ReceiveIPv4.
One consequence of the new conn.Bind layer is that
closing the wireguard-go device is now indistinguishable
from the routine bring-up and tear-down normally experienced
by a conn.Bind. We thus have to explicitly close the magicsock.Conn
when the close the wireguard-go device.
One downside of this change is that we are reliant on wireguard-go
to call receiveDERP to process DERP messages. This is fine for now,
but is perhaps something we should fix in the future.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
control/controlclient: sign RegisterRequest
Some customers wish to verify eligibility for devices to join their
tailnets using machine identity certificates. TLS client certs could
potentially fulfill this role but the initial customer for this feature
has technical requirements that prevent their use. Instead, the
certificate is loaded from the Windows local machine certificate store
and uses its RSA public key to sign the RegisterRequest message.
There is room to improve the flexibility of this feature in future and
it is currently only tested on Windows (although Darwin theoretically
works too), but this offers a reasonable starting place for now.
Updates tailscale/coral#6
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
This reverts the revert commit 84aba349d9.
And changes us to use inet.af/netstack.
Updates #1518
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
gVisor fixed their google/gvisor#1446 so we can include gVisor mode
on 32-bit machines.
A few minor upstream API changes, as normal.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
$ GOOS=openbsd GOARCH=arm64 go install tailscale.com/cmd/...@latest
pkg/mod/github.com/kr/pty@v1.1.4-0.20190131011033-7dc38fb350b1/pty_openbsd.go:24:10: undefined: ptmget
pkg/mod/github.com/kr/pty@v1.1.4-0.20190131011033-7dc38fb350b1/pty_openbsd.go:25:34: undefined: ioctl_PTMGET
"go mod tidy" did some unrelated work in go.sum, maybe because it was
not run with Go 1.16 before.
Signed-off-by: Filippo Valsorda <hi@filippo.io>
And open up socket permissions like Linux, now that we know who
connections are from.
This uses the new inet.af/peercred that supports Linux and Darwin at
the moment.
Fixes#1347Fixes#1348
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is mostly code movement from the wireguard-go repo.
Most of the new wgcfg package corresponds to the wireguard-go wgcfg package.
wgengine/wgcfg/device{_test}.go was device/config{_test}.go.
There were substantive but simple changes to device_test.go to remove
internal package device references.
The API of device.Config (now wgcfg.DeviceConfig) grew an error return;
we previously logged the error and threw it away.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
22507adf54 stopped relying on
our fork of wireguard-go's UpdateDst callback.
As a result, we can unwind that code,
and the extra return value of ReceiveIPv{4,6}.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
This eliminates a dependency on wgcfg.Endpoint,
as part of the effort to eliminate our wireguard-go fork.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
netaddr.IP no longer allocates, so don't need a cache or all its associated
code/complexity.
This totally removes groupcache/lru from the deps.
Also go mod tidy.
* wengine/netstack: bump gvisor to latest version
Signed-off-by: Naman Sood <naman@tailscale.com>
* update dependencies
Signed-off-by: Naman Sood <naman@tailscale.com>
* Don't change hardcoded IP
Signed-off-by: Naman Sood <naman@tailscale.com>
Not usefully functional yet (mostly a proof of concept), but getting
it submitted for some work @namansood is going to do atop this.
Updates #707
Updates #634
Updates #48
Updates #835
Addresses #964
Still to be done:
- Figure out the correct logging lines in util/systemd
- Figure out if we need to slip the systemd.Status function anywhere
else
- Log util/systemd errors? (most of the errors are of the "you cannot do
anything about this, but it might be a bad idea to crash the program if
it errors" kind)
Assistance in getting this over the finish line would help a lot.
Signed-off-by: Christine Dodrill <me@christine.website>
util/systemd: rename the nonlinux file to appease the magic
Signed-off-by: Christine Dodrill <me@christine.website>
util/systemd: fix package name
Signed-off-by: Christine Dodrill <me@christine.website>
util/systemd: fix review feedback from @mdlayher
Signed-off-by: Christine Dodrill <me@christine.website>
cmd/tailscale{,d}: update depaware manifests
Signed-off-by: Christine Dodrill <me@christine.website>
util/systemd: use sync.Once instead of func init
Signed-off-by: Christine Dodrill <me@christine.website>
control/controlclient: minor review feedback fixes
Signed-off-by: Christine Dodrill <me@christine.website>
{control,ipn,systemd}: fix review feedback
Signed-off-by: Christine Dodrill <me@christine.website>
review feedback fixes
Signed-off-by: Christine Dodrill <me@christine.website>
ipn: fix sprintf call
Signed-off-by: Christine Dodrill <me@christine.website>
ipn: make staticcheck less sad
Signed-off-by: Christine Dodrill <me@christine.website>
ipn: print IP address in connected status
Signed-off-by: Christine Dodrill <me@christine.website>
ipn: review feedback
Signed-off-by: Christine Dodrill <me@christine.website>
final fixups
Signed-off-by: Christine Dodrill <me@christine.website>
Use golang.zx2c4.com/wireguard/windows/tunnel/winipcfg
instead of github.com/tailscale/winipcfg-go package.
Updates #760
Signed-off-by: Alex Brainman <alex.brainman@gmail.com>
This change is to restore /etc/resolv.conf after tailscale down is called. This is done by setting the dns.Manager before errors occur. Error collection is also added.
Fixes#723
I had to use
go get -u github.com/tailscale/depaware@e09ee10c18249e4bf198e66bbd47babcd502637a
to force it to the correct version; it kept selecting head~1.
Maybe because the branch is called main instead of master?
Maybe because of some delay?
This change adds to tsdns the ability to delegate lookups to upstream nameservers.
This is crucial for setting Magic DNS as the system resolver.
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
It's just a config wrapper that passes "use less memory at the
expense of compression" parameters by default, so that we don't
accidentally construct resource-hungry (de)compressors.
Also includes a benchmark that measures the memory cost of the
small variants vs. the stock variants. The savings are significant
on both compressors (~8x less memory) and decompressors (~1.4x less,
not including the savings from the significantly smaller
window on the compression side - with those savings included it's
more like ~140x smaller).
BenchmarkSmallEncoder-8 56174 19354 ns/op 31 B/op 0 allocs/op
BenchmarkSmallEncoderWithBuild-8 2900 382940 ns/op 1746547 B/op 36 allocs/op
BenchmarkStockEncoder-8 48921 25761 ns/op 286 B/op 0 allocs/op
BenchmarkStockEncoderWithBuild-8 426 2630241 ns/op 13843842 B/op 124 allocs/op
BenchmarkSmallDecoder-8 123814 9344 ns/op 0 B/op 0 allocs/op
BenchmarkSmallDecoderWithBuild-8 41547 27455 ns/op 27694 B/op 31 allocs/op
BenchmarkStockDecoder-8 129832 9417 ns/op 1 B/op 0 allocs/op
BenchmarkStockDecoderWithBuild-8 25561 51751 ns/op 39607 B/op 92 allocs/op
Signed-off-by: David Anderson <danderson@tailscale.com>
Ping messages now go out somewhat regularly, pong replies are sent,
and pong replies are now partially handled enough to upgrade off DERP
to LAN.
CallMeMaybe packets are sent & received over DERP, but aren't yet
handled. That's next (and regular maintenance timers), and then WAN
should work.
Updates #483
Instead of hard-coding the DERP map (except for cmd/tailscale netcheck
for now), get it from the control server at runtime.
And make the DERP map support multiple nodes per region with clients
picking the first one that's available. (The server will balance the
order presented to clients for load balancing)
This deletes the stunner package, merging it into the netcheck package
instead, to minimize all the config hooks that would've been
required.
Also fix some test flakes & races.
Fixes#387 (Don't hard-code the DERP map)
Updates #388 (Add DERP region support)
Fixes#399 (wgengine: flaky tests)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
No tidy, because it doesn't work for me:
$ go mod tidy
go: finding module for package tailscale.io/control
go: finding module for package tailscale.io/control/cfgdb
tailscale.com/control/controlclient tested by
tailscale.com/control/controlclient.test imports
tailscale.io/control: cannot find module providing package tailscale.io/control: unrecognized import path "tailscale.io/control": parse https://tailscale.io/control?go-get=1: no go-import meta tags (meta tag tailscale.com did not match import path tailscale.io/control)
tailscale.com/control/controlclient tested by
tailscale.com/control/controlclient.test imports
tailscale.io/control/cfgdb: cannot find module providing package tailscale.io/control/cfgdb: unrecognized import path "tailscale.io/control/cfgdb": parse https://tailscale.io/control/cfgdb?go-get=1: no go-import meta tags (meta tag tailscale.com did not match import path tailscale.io/control/cfgdb)
Signed-off-by: Elias Naur <mail@eliasnaur.com>
It was one of the top garbage producers on my phone.
It's slated to be deleted and replaced anyway, but this helps in the
meantime.
The go.sum changes look scary, but the new dep only adds 240 bytes to
the binary. The go.sum noise is just cmd/go being aggressive in
including a lot of stuff (which is being fixed in Go 1.15, for what I
understand). And I ran a go mod tidy, which added some too. (I had to
write a custom wrapper around go mod tidy because this mod tidy
normally breaks on tailscale.io/control being missing but referenced
in tests)
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
