9538e9f970 broke LocalBackend.WhoIs
where you can no longer lookup yourself in WhoIs.
This occurs because the LocalBackend.peers map only contains peers.
If we fail to lookup a peer, double-check whether it is ourself.
Fixes#9470
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Co-authored-by: Rhea Ghosh <rhea@tailscale.com>
The initial implementation directly mirrored the behavior of Tailscale
exit nodes, where the WireGuard exit node DNS took precedence over other
configuration.
This adjusted implementation treats the WireGuard DNS
resolvers as a lower precedence default resolver than the tailnet
default resolver, and allows split DNS configuration as well.
This also adds test coverage to the existing DNS selection behavior with
respect to default resolvers and split DNS routes for Tailscale exit
nodes above cap 25. There may be some refinement to do in the logic in
those cases, as split DNS may not be working as we intend, though that
would be a pre-existing and separate issue.
Updates #9377
Signed-off-by: James Tucker <james@tailscale.com>
This PR plumbs through awareness of an IPv6 SNAT/masquerade address from the wire protocol
through to the low-level (tstun / wgengine). This PR is the first in two PRs for implementing
IPv6 NAT support to/from peers.
A subsequent PR will implement the data-plane changes to implement IPv6 NAT - this is just plumbing.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates ENG-991
Like PeerCapMap, add a field to `tailcfg.Node` which provides
a map of Capability to raw JSON messages which are deferred to be
parsed later by the application code which cares about the specific
capabilities. This effectively allows us to prototype new behavior
without having to commit to a schema in tailcfg, and it also opens up
the possibilities to develop custom behavior in tsnet applications w/o
having to plumb through application specific data in the MapResponse.
Updates #4217
Signed-off-by: Maisem Ali <maisem@tailscale.com>
And convert all callers over to the methods that check SelfNode.
Now we don't have multiple ways to express things in tests (setting
fields on SelfNode vs NetworkMap, sometimes inconsistently) and don't
have multiple ways to check those two fields (often only checking one
or the other).
Updates #9443
Change-Id: I2d7ba1cf6556142d219fae2be6f484f528756e3c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We have some flaky integration tests elsewhere that have no one place
to ask about the state of the world. This makes LocalBackend be that
place (as it's basically there anyway) but doesn't yet add the ForTest
accessor method.
This adds a LocalBackend.peers map[NodeID]NodeView that is
incrementally updated as mutations arrive. And then we start moving
away from using NetMap.Peers at runtime (UpdateStatus no longer uses
it now). And remove another copy of NodeView in the LocalBackend
nodeByAddr map. Change that to point into b.peers instead.
Future changes will then start streaming whole-node-granularity peer
change updates to WatchIPNBus clients, tracking statefully per client
what each has seen. This will get the GUI clients from receiving less
of a JSON storm of updates all the time.
Updates #1909
Change-Id: I14a976ca9f493bdf02ba7e6e05217363dcf422e5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
NetworkMap.Addresses is redundant with the SelfNode.Addresses. This
works towards a TODO to delete NetworkMap.Addresses and replace it
with a method.
This is similar to #9389.
Updates #cleanup
Change-Id: Id000509ca5d16bb636401763d41bdb5f38513ba0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* Remove unnecessary mutexes (there's no concurrency)
* Simplify LocalBackend.UpdateStatus using the StatusBuilder.WantPeers
field that was added in 0f604923d3, removing passing around some
method values into func args. And then merge two methods.
More remains, but this is a start.
Updates #9433
Change-Id: Iaf2d7ec6e4e590799f00bae185465a4fd089b822
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This enables installing default resolvers specified by
tailcfg.Node.ExitNodeDNSResolvers when the exit node is selected.
Updates #9377
Signed-off-by: James Tucker <james@tailscale.com>
It has one user (LocalBackend) which can ask magicsock itself.
Updates #cleanup
Change-Id: I8c03cbb1e5ba57b0b442621b5fa467030c14a2e2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
(continuing the mission of removing rando methods from the Engine
interface that we don't need anymore)
Updates #cleanup
Change-Id: Id5190917596bf04d7185c3b331a852724a3f5a16
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We always have one. Stop pretending we might not.
Instead, add one early panic in NewLocalBackend if we actually don't.
Updates #cleanup
Change-Id: Iba4b78ed22cb6248e59c2b01a79355ca7a200ec8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
LocalBackend can talk to magicsock on its own to do this without
the "Engine" being involved.
(Continuing a little side quest of cleaning up the Engine
interface...)
Updates #cleanup
Change-Id: I8654acdca2b883b1bd557fdc0cfb90cd3a418a62
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It had exactly one user: netstack. Just have LocalBackend notify
netstack when here's a new netmap instead, simplifying the bloated
Engine interface that has grown a bunch of non-Engine-y things.
(plenty of rando stuff remains after this, but it's a start)
Updates #cleanup
Change-Id: I45e10ab48119e962fc4967a95167656e35b141d8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Currently only the top four most popular changes: endpoints, DERP
home, online, and LastSeen.
Updates #1909
Change-Id: I03152da176b2b95232b56acabfb55dcdfaa16b79
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I missed connecting some controlknobs.Knobs pieces in 4e91cf20a8
resulting in that breaking control knobs entirely.
Whoops.
The fix in ipn/ipnlocal (where it makes a new controlclient) but to
atone, I also added integration tests. Those integration tests use
a new "tailscale debug control-knobs" which by itself might be useful
for future debugging.
Updates #9351
Change-Id: Id9c89c8637746d879d5da67b9ac4e0d2367a3f0d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This PR adds optimistic concurrency control in the local client and
api in order to ensure multiple writes of the ServeConfig do not
conflict with each other.
Updates #9273
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Previously two tsnet nodes in the same process couldn't have disjoint
sets of controlknob settings from control as both would overwrite each
other's global variables.
This plumbs a new controlknobs.Knobs type around everywhere and hangs
the knobs sent by control on that instead.
Updates #9351
Change-Id: I75338646d36813ed971b4ffad6f9a8b41ec91560
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
All platforms use it at this point, including iOS which was the
original hold out for memory reasons. No more reason to make it
optional.
Updates #9332
Change-Id: I743fbc2f370921a852fbcebf4eb9821e2bdd3086
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Cache the last `ClientVersion` value that was received from coordination
server and pass it in the localapi `/status` response.
When running `tailscale status`, print a message if `RunningAsLatest` is
`false`.
Updates #6907
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Log some progress info to make updates more debuggable. Also, track
whether an active update is already started and return an error if
a concurrent update is attempted.
Some planned future PRs:
* add JSON output to `tailscale update`
* use JSON output from `tailscale update` to provide a more detailed
status of in-progress update (stage, download progress, etc)
Updates #6907
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This PR adds a new field to the serve config that can be used to identify which serves are in "foreground mode" and then can also be used to ensure they do not get persisted to disk so that if Tailscaled gets ungracefully shutdown, the reloaded ServeConfig will not have those ports opened.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This PR removes the per request logging to the CLI as the CLI
will not be displaying those logs initially.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
This PR adds a new field to the ServeConfig which maps
WatchIPNBus session ids to foreground serve configs.
The PR also adds a DeleteForegroundSession method to ensure the config
gets cleaned up on sessions ending.
Note this field is not currently used but will be in follow up work.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
It would acquire the lock, calculate `nextState`, relase
the lock, then call `enterState` which would acquire the lock
again. There were obvious races there which could lead to
nil panics as seen in a test in a different repo.
```
panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x2 addr=0x70 pc=0x1050f2c7c]
goroutine 42240 [running]:
tailscale.com/ipn/ipnlocal.(*LocalBackend).enterStateLockedOnEntry(0x14002154e00, 0x6)
tailscale.com/ipn/ipnlocal/local.go:3715 +0x30c
tailscale.com/ipn/ipnlocal.(*LocalBackend).enterState(0x14002154e00?, 0x14002e3a140?)
tailscale.com/ipn/ipnlocal/local.go:3663 +0x8c
tailscale.com/ipn/ipnlocal.(*LocalBackend).stateMachine(0x14001f5e280?)
tailscale.com/ipn/ipnlocal/local.go:3836 +0x2c
tailscale.com/ipn/ipnlocal.(*LocalBackend).setWgengineStatus(0x14002154e00, 0x14002e3a190, {0x0?, 0x0?})
tailscale.com/ipn/ipnlocal/local.go:1193 +0x4d0
tailscale.com/wgengine.(*userspaceEngine).RequestStatus(0x14005d90300)
tailscale.com/wgengine/userspace.go:1051 +0x80
tailscale.com/wgengine.NewUserspaceEngine.func2({0x14002e3a0a0, 0x2, 0x140025cce40?})
tailscale.com/wgengine/userspace.go:318 +0x1a0
tailscale.com/wgengine/magicsock.(*Conn).updateEndpoints(0x14002154700, {0x105c13eaf, 0xf})
tailscale.com/wgengine/magicsock/magicsock.go:531 +0x424
created by tailscale.com/wgengine/magicsock.(*Conn).ReSTUN in goroutine 42077
tailscale.com/wgengine/magicsock/magicsock.go:2142 +0x3a4
```
Updates tailscale/corp#14480
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This PR adds a SessionID field to the ipn.Notify struct so that
ipn buses can identify a session and register deferred clean up
code in the future. The first use case this is for is to be able to
tie foreground serve configs to a specific watch session and ensure
its clean up when a connection is closed.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
If Start was called multiple times concurrently, it would
create a new client and shutdown the previous one. However
there was a race possible between shutting down the old one
and assigning a new one where the concurent goroutine may
have assigned another one already and it would leak.
Updates tailscale/corp#14471
Signed-off-by: Maisem Ali <maisem@tailscale.com>
resetControlClientLocked is called while b.mu was held and
would call cc.Shutdown which would wait for the observer queue
to drain.
However, there may be active callbacks from cc already waiting for
b.mu resulting in a deadlock.
This makes it so that resetControlClientLocked does not call
Shutdown, and instead just returns the value.
It also makes it so that any status received from previous cc
are ignored.
Updates tailscale/corp#12827
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The flags are hidden for now. Adding propagation to tailscaled and
persistence only. The prefs field is wrapped in a struct to allow for
future expansion (like update schedule).
Updates #6907
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
> **Note**
> Behind the `TAILSCALE_USE_WIP_CODE` flag
In preparing for incoming CLI changes, this PR merges the code path for the `serve` and `funnel` subcommands.
See the parent issue for more context.
The following commands will run in foreground mode when using the environment flag.
```
tailscale serve localhost:3000
tailscae funnel localhost:3000
```
Replaces #9134
Updates #8489
Signed-off-by: Tyler Smalley <tyler@tailscale.com>
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Co-authored-by: Marwan Sulaiman <marwan@tailscale.com>
During Shutdown of an ephemeral node, we called Logout (to best effort
delete the node earlier), which then called back into
resetForProfileChangeLockedOnEntry, which then tried to Start
again. That's all a waste of work during shutdown and complicates
other cleanups coming later.
Updates #cleanup
Change-Id: I0b8648cac492fc70fa97c4ebef919bbe352c5d7b
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We already removed the async API, make it more sync and remove
the FinishLogout state too.
This also makes the callback be synchronous again as the previous
attempt was trying to work around the logout callback resulting
in a client shutdown getting blocked forever.
Updates #3833
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We have cases where the SetControlClientStatus would result in
a Shutdown call back into the auto client that would block
forever. The right thing to do here is to fix the LocalBackend
state machine but thats a different dumpster fire that we
are slowly making progress towards.
This makes it so that the SetControlClientStatus happens in a
different goroutine so that calls back into the auto client
do not block.
Also add a few missing mu.Unlocks in LocalBackend.Start.
Updates #9181
Signed-off-by: Maisem Ali <maisem@tailscale.com>
* don't try to re-Start (and thus create a new client) during Shutdown
* in tests, wait for controlclient to fully shut down when replacing it
* log a bit more
Updates tailscale/corp#14139
Updates tailscale/corp#13175 etc
Updates #9178 and its flakes.
Change-Id: I3ed2440644dc157aa6e616fe36fbd29a6056846c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
They were entirely redundant and 1:1 with the status field
so this turns them into methods instead.
Updates #cleanup
Updates #1909
Change-Id: I7d939750749edf7dae4c97566bbeb99f2f75adbc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For now the method has only one interface (the same as the func it's
replacing) but it will grow, eventually with the goal to remove the
controlclient.Status type for most purposes.
Updates #1909
Change-Id: I715c8bf95e3f5943055a94e76af98d988558a2f2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Printing out JSON representation things in log output is pretty common.
Updates #cleanup
Change-Id: Ife2d2e321a18e6e1185efa8b699a23061ac5e5a4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Upcoming work on incremental netmap change handling will require some
replumbing of which subsystems get notified about what. Done naively,
it could break "tailscale status --json" visibility later. To make sure
I understood the flow of all the updates I was rereading the status code
and realized parts of ipnstate.Status were being populated by the wrong
subsystems.
The engine (wireguard) and magicsock (data plane, NAT traveral) should
only populate the stuff that they uniquely know. The WireGuard bits
were fine but magicsock was populating stuff stuff that LocalBackend
could've better handled, so move it there.
Updates #1909
Change-Id: I6d1b95d19a2d1b70fbb3c875fac8ea1e169e8cb0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This PR addresses a number of the follow ups from PR #8491 that were written
after getting merged.
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
It was in SelfNode.Hostinfo anyway. The redundant copy was just
costing us an allocation per netmap (a Hostinfo.Clone).
Updates #1909
Change-Id: Ifac568aa5f8054d9419828489442a0f4559bc099
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds ability to start Funnel in the foreground and stream incoming
connections. When foreground process is stopped, Funnel is turned
back off for the port.
Exampe usage:
```
TAILSCALE_FUNNEL_V2=on tailscale funnel 8080
```
Updates #8489
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
And optimize the Persist setting a bit, allocating later and only mutating
fields when there's been a Node change.
Updates #1909
Change-Id: Iaddfd9e88ef76e1d18e8d0a41926eb44d0955312
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In b987b2ab18 (2021-01-12) when we introduced sharing we mapped
the sharer to the userid at a low layer, mostly to fix the display of
"tailscale status" and the client UIs, but also some tests.
The commit earlier today, 7dec09d169, removed the 2.5yo option
to let clients disable that automatic mapping, as clearly we were never
getting around to it.
This plumbs the Sharer UserID all the way to ipnstatus so the CLI
itself can choose to print out the Sharer's identity over the node's
original owner.
Then we stop mangling Node.User and let clients decide how they want
to render things.
To ease the migration for the Windows GUI (which currently operates on
tailcfg.Node via the NetMap from WatchIPNBus, instead of PeerStatus),
a new method Node.SharerOrUser is added to do the mapping of
Sharer-else-User.
Updates #1909
Updates tailscale/corp#1183
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I screwed this up in 58a4fd43d as I expected. I even looked out for
cases like this (because this always happens) and I still missed
it. Vet doesn't flag these because they're not the standard printf
funcs it knows about. TODO: make our vet recognize all our
"logger.Logf" types.
Updates #8948
Change-Id: Iae267d5f81da49d0876b91c0e6dc451bf7dcd721
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Make it just a views.Slice[netip.Prefix] instead of its own named type.
Having the special case led to circular dependencies in another WIP PR
of mine.
Updates #8948
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Now a nodeAttr: ForceBackgroundSTUN, DERPRoute, TrimWGConfig,
DisableSubnetsIfPAC, DisableUPnP.
Kept support for, but also now a NodeAttr: RandomizeClientPort.
Removed: SetForceBackgroundSTUN, SetRandomizeClientPort (both never
used, sadly... never got around to them. But nodeAttrs are better
anyway), EnableSilentDisco (will be a nodeAttr later when that effort
resumes).
Updates #8923
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We would only look for duplicate profiles when a new login
occurred but when using `--force-reauth` we could switch
users which would end up with duplicate profiles.
Updates #7726
Signed-off-by: Maisem Ali <maisem@tailscale.com>
There are a few situations where we end up with duplicate profiles.
Add tests to identify those situations, fix in followup.
Updates #7726
Signed-off-by: Maisem Ali <maisem@tailscale.com>
It was being modified in two places in Direct for the auth routine
and then in LocalBackend when a new NetMap was received. This was
confusing, so make Direct also own changes to Persist when a new
NetMap is received.
Updates #7726
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This adds the capability to pad disco ping message payloads to reach a
specified size. It also plumbs it through to the tailscale ping -size
flag.
Disco pings used for actual endpoint discovery do not use this yet.
Updates #311.
Signed-off-by: salman <salman@tailscale.com>
Co-authored-by: Val <valerie@tailscale.com>
Rather than make each ipn.StateStore implementation guard against
useless writes (a write of the same value that's already in the
store), do writes via a new wrapper that has a fast path for the
unchanged case.
This then fixes profileManager's flood of useless writes to AWS SSM,
etc.
Updates #8785
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The revoke-keys command allows nodes with tailnet lock keys
to collaborate to erase the use of a compromised key, and remove trust
in it.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates ENG-1848
While our `shouldStartDomainRenewal` check is correct, `getCertPEM`
would always bail if the existing cert is not expired. Add the same
`shouldStartDomainRenewal` check to `getCertPEM` to make it proceed with
renewal when existing certs are still valid but should be renewed.
The extra check is expensive (ARI request towards LetsEncrypt), so cache
the last check result for 1hr to not degrade `tailscale serve`
performance.
Also, asynchronous renewal is great for `tailscale serve` but confusing
for `tailscale cert`. Add an explicit flag to `GetCertPEM` to force a
synchronous renewal for `tailscale cert`.
Fixes#8725
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This change introduces a new subcommand, `exit-node`, along with a
subsubcommand of `list` and a `--filter` flag.
Exit nodes without location data will continue to be displayed when
`status` is used. Exit nodes with location data will only be displayed
behind `exit-node list`, and in status if they are the active exit node.
The `filter` flag can be used to filter exit nodes with location data by
country.
Exit nodes with Location.Priority data will have only the highest
priority option for each country and city listed. For countries with
multiple cities, a <Country> <Any> option will be displayed, indicating
the highest priority node within that country.
Updates tailscale/corp#13025
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Define PeerCapabilty and PeerCapMap as the new way of sending down
inter-peer capability information.
Previously, this was unstructured and you could only send down strings
which got too limiting for certain usecases. Instead add the ability
to send down raw JSON messages that are opaque to Tailscale but provide
the applications to define them however they wish.
Also update accessors to use the new values.
Updates #4217
Signed-off-by: Maisem Ali <maisem@tailscale.com>
When using a custom http port like 8080, this was resulting in a
constructed hostname of `host.tailnet.ts.net:8080.tailnet.ts.net` when
looking up the serve handler. Instead, strip off the port before adding
the MagicDNS suffix.
Also use the actual hostname in `serve status` rather than the literal
string "host".
Fixes#8635
Signed-off-by: Will Norris <will@tailscale.com>
The server hasn't sent it in ages.
Updates #cleanup
Change-Id: I9695ab0f074ec6fb006e11faf3cdfc5ca049fbf8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
ScrubbedGoroutineDump previously only returned the stacks of all
goroutines. I also want to be able to use this for only the current
goroutine's stack. Add a bool param to support both ways.
Updates tailscale/corp#5149
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds a `Tailscale-Headers-Info` header whenever the `Tailscale-User-`
headers are filled from the HTTP proxy handler.
Planning on hooking this shorturl up to KB docs about the header
values (i.e. what's a login name vs. display name) and security
considerations to keep in mind while using these headers - notibly
that they can also be filled from external requests that do not hit
tailscaled.
Updates https://github.com/tailscale/tailscale/issues/6954
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Trying to SSH when SELinux is enforced results in errors like:
```
➜ ~ ssh ec2-user@<ip>
Last login: Thu Jun 1 22:51:44 from <ip2>
ec2-user: no shell: Permission denied
Connection to <ip> closed.
```
while the `/var/log/audit/audit.log` has
```
type=AVC msg=audit(1685661291.067:465): avc: denied { transition } for pid=5296 comm="login" path="/usr/bin/bash" dev="nvme0n1p1" ino=2564 scontext=system_u:system_r:unconfined_service_t:s0 tcontext=unconfined_u:unconfined_r:unconfined_t:s0 tclass=process permissive=0
```
The right fix here would be to somehow install the appropriate context when
tailscale is installed on host, but until we figure out a way to do that
stop using the `login` cmd in these situations.
Updates #4908
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Adds two new headers to HTTP serve proxy:
- `Tailscale-User-Login`: Filled with requester's login name.
- `Tailscale-User-Name`: Filled with requester's display name.
These headers only get filled when the SrcAddr is associated with
a non-tagged (i.e. user-owned) node within the client's Tailnet.
The headers are passed through empty when the request originated
from another tailnet, or the public internet (via funnel).
Updates https://github.com/tailscale/tailscale/issues/6954
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
* tka: provide verify-deeplink local API endpoint
Fixes https://github.com/tailscale/tailscale/issues/8302
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
Address code review comments
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
Address code review comments by Ross
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
* Improve error encoding, fix logic error
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
---------
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
The netstack code had a bunch of logic to figure out if the LocalBackend should handle an
incoming connection and then would call the function directly on LocalBackend. Move that
logic to LocalBackend and refactor the methods to return conn handlers.
Updates #cleanup
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This is a follow up on PR #8172 that adds a synchronous Poll method
which allows for the Poller to be used as a zero value without needing
the constructor. The local backend is also changed to use the new API.
A follow up PR will remove the async functionality from the portlist package.
Updates #8171
Signed-off-by: Marwan Sulaiman <marwan@tailscale.com>
Instead of renewing certificates based on whether or not they're expired
at a fixed 14-day period in the future, renew based on whether or not
we're more than 2/3 of the way through the certificate's lifetime. This
properly handles shorter-lived certificates without issue.
Updates #8204
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I5e82a9cadc427c010d04ce58c7f932e80dd571ea
This change introduces a NodeKey func on localbackend that returns the
public node key.
Updates tailscale/corp#9967
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
It was supposed to be best effort but in some cases (macsys at least,
per @marwan-at-work) it hangs and exhausts the whole context.Context
deadline so we fail to make the SetDNS call to the server.
Updates #8067
Updates #3273 etc
Change-Id: Ie1f04abe9689951484748aecdeae312afbafdb0f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is part of an effort to clean up tailscaled initialization between
tailscaled, tailscaled Windows service, tsnet, and the mac GUI.
Updates #8036
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This fix does not seem ideal, but the test infrastructure using a local
goos doesn't seem to avoid all of the associated challenges, but is
somewhat deeply tied to the setup.
The core issue this addresses for now is that when run on Windows there
can be no code paths that attempt to use an invalid UID string, which on
Windows is described in [1].
For the goos="linux" tests, we now explicitly skip the affected
migration code if runtime.GOOS=="windows", and for the Windows test we
explicitly use the running users uid, rather than just the string
"user1". We also now make the case where a profile exists and has
already been migrated a non-error condition toward the outer API.
Updates #7876
[1] https://learn.microsoft.com/en-us/windows-server/identity/ad-ds/manage/understand-security-identifiers
Signed-off-by: James Tucker <jftucker@gmail.com>
On some platforms (notably macOS and iOS) we look up the default
interface to bind outgoing connections to. This is both duplicated
work and results in logspam when the default interface is not available
(i.e. when a phone has no connectivity, we log an error and thus cause
more things that we will try to upload and fail).
Fixed by passing around a netmon.Monitor to more places, so that we can
use its cached interface state.
Fixes#7850
Updates #7621
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
We're using it in more and more places, and it's not really specific to
our use of Wireguard (and does more just link/interface monitoring).
Also removes the separate interface we had for it in sockstats -- it's
a small enough package (we already pull in all of its dependencies
via other paths) that it's not worth the extra complexity.
Updates #7621
Updates #7850
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This is a follow-up to #7905 that adds two more linters and fixes the corresponding findings. As per the previous PR, this only flags things that are "obviously" wrong, and fixes the issues found.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8739bdb7bc4f75666a7385a7a26d56ec13741b7c
Without this, the peer fails to do anything over the PeerAPI if it
has a masquerade address.
```
Apr 19 13:58:15 hydrogen tailscaled[6696]: peerapi: invalid request from <ip>:58334: 100.64.0.1/32 not found in self addresses
```
Updates #8020
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Exposes some internal state of the sockstats package via the C2N and
PeerAPI endpoints, so that it can be used for debugging. For now this
includes the estimated radio on percentage and a second-by-second view
of the times the radio was active.
Also fixes another off-by-one error in the radio on percentage that
was leading to >100% values (if n seconds have passed since we started
to monitor, there may be n + 1 possible seconds where the radio could
have been on).
Updates tailscale/corp#9230
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This adds an initial and intentionally minimal configuration for
golang-ci, fixes the issues reported, and adds a GitHub Action to check
new pull requests against this linter configuration.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8f38fbc315836a19a094d0d3e986758b9313f163
Redoes the approach from #5550 and #7539 to explicitly pass in the logf
function, instead of having global state that can be overridden.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
We accidentally switched to ./tool/go in
4022796484 which resulted in no longer
running Windows builds, as this is attempting to run a bash script.
I was unable to quickly fix the various tests that have regressed, so
instead I've added skips referencing #7876, which we need to back and
fix.
Updates #7262
Updates #7876
Signed-off-by: James Tucker <james@tailscale.com>
Otherwise there may be a panic if it's nil (and the control side of
the c2n call will just time out).
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Makes it more apparent in the PeerAPI endpoint that the client was
not built with the appropriate toolchain or build tags.
Updates tailscale/corp#9230
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This makes the sockstat logger available on all builds, but only enables
it by default for unstable. For stable builds, the logger must be
explicitly enabled via C2N component logger.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Will Norris <will@tailscale.com>
I realized that a lot of the problems that we're seeing around migration and
LocalBackend state can be avoided if we drive Windows pref migration entirely
from within tailscaled. By doing it this way, tailscaled can automatically
perform the migration as soon as the connection with the client frontend is
established.
Since tailscaled is already running as LocalSystem, it already has access to
the user's local AppData directory. The profile manager already knows which
user is connected, so we simply need to resolve the user's prefs file and read
it from there.
Of course, to properly migrate this information we need to also check system
policies. I moved a bunch of policy resolution code out of the GUI and into
a new package in util/winutil/policy.
Updates #7626
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
For stores like k8s secrets we need to dial out to the k8s API as though Tailscale
wasn't running. The issue currently only manifests when you try to use an exit node
while running inside a k8s cluster and are trying to use Kubernetes secrets as the
backing store.
This doesn't address cmd/containerboot, which I'll do in a follow up.
Updates #7695
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Since users can run tailscaled in a variety of ways (root, non-root,
non-root with process capabilities on Linux), this check will print the
current process permissions to the log to aid in debugging.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ida93a206123f98271a0c664775d0baba98b330c7
The reverse proxy was sending the ingressd IPv6 down as the
X-Forwarded-For. This update uses the actual remote addr.
Updates tailscale/corp#9914
Signed-off-by: Shayne Sweeney <shayne@tailscale.com>
This change trims the mountPoint from the request URL path before
sending the request to the reverse proxy.
Today if you mount a proxy at `/foo` and request to
`/foo/bar/baz`, we leak the `mountPoint` `/foo` as part of the request
URL's path.
This fix makes removed the `mountPoint` prefix from the path so
proxied services receive requests as if they were running at the root
(`/`) path.
This could be an issue if the app generates URLs (in HTML or otherwise)
and assumes `/path`. In this case, those URLs will 404.
With that, I still think we should trim by default and not leak the
`mountPoint` (specific to Tailscale) into whatever app is hosted.
If it causes an issue with URL generation, I'd suggest looking at configuring
an app-specific path prefix or running Caddy as a more advanced
solution.
Fixes: #6571
Signed-off-by: Shayne Sweeney <shayne@tailscale.com>
We were checking against the wrong directory, instead if we
have a custom store configured just use that.
Fixes#7588Fixes#7665
Signed-off-by: Maisem Ali <maisem@tailscale.com>
We were not storing the ACME keys in the state store, they would always
be stored on disk.
Updates #7588
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This change focuses on the backend log ID, which is the mostly commonly
used in the client. Tests which don't seem to make use of the log ID
just use the zero value.
Signed-off-by: Will Norris <will@tailscale.com>
Switch to using logtail for logging sockstat logs. Always log locally
(on supported platforms), but disable automatic uploading. Change
existing c2n sockstats request to trigger upload to log server and
return log ID.
Signed-off-by: Will Norris <will@tailscale.com>
They're not needed for the sockstats logger, and they're somewhat
expensive to return (since they involve the creation of a map per
label). We now have a separate GetInterfaces() method that returns
them instead (which we can still use in the PeerAPI debug endpoint).
If changing sockstatlog to sample at 10,000 Hz (instead of the default
of 10Hz), the CPU usage would go up to 59% on a iPhone XS. Removing the
per-interface stats drops it to 20% (a no-op implementation of Get that
returns a fixed value is 16%).
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Followup to #7499 to make validation a separate function (
GetWithValidation vs. Get). This way callers that don't need it don't
pay the cost of a syscall per active TCP socket.
Also clears the conn on close, so that we don't double-count the stats.
Also more consistently uses Go doc comments for the exported API of the
sockstats package.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Previously the part that handled Funnel connections was not
aware of any listeners that tsnet.Servers might have had open
so it would check against the ServeConfig and fail.
Adding a ServeConfig for a TCP proxy was also not suitable in this
scenario as that would mean creating two different listeners and have
one forward to the other, which really meant that you could not have
funnel and tailnet-only listeners on the same port.
This also introduces the ipn.FunnelConn as a way for users to identify
whether the call is coming over funnel or not. Currently it only holds
the underlying conn and the target as presented in the "Tailscale-Ingress-Target"
header.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
