This moves the Windows-only initialization of the filelogger into
logpolicy. Previously we only did it when babysitting the tailscaled
subprocess, but this meant that log messages from the service itself
never made it to disk. Examples that weren't logged to disk:
* logtail unable to dial out,
* DNS flush messages from the service
* svc.ChangeRequest messages (#3581)
This is basically the same fix as #3571 but staying in the Logf type,
and avoiding build-tagged file (which wasn't quite a goal, but
happened and seemed nice)
Fixes#3570
Co-authored-by: Aaron Klotz <aaron@tailscale.com>
Change-Id: Iacd80c4720b7218365ec80ae143339d030842702
This is enough to handle the DNS queries as generated by Go's
net package (which our HTTP/SOCKS client uses), and the responses
generated by the ExitDNS DoH server.
This isn't yet suitable for putting on 100.100.100.100 where a number
of different DNS clients would hit it, as this doesn't yet do
EDNS0. It might work, but it's untested and likely incomplete.
Likewise, this doesn't handle anything about truncation, as the
exchanges are entirely in memory between Go or DoH. That would also
need to be handled later, if/when it's hooked up to 100.100.100.100.
Updates #3507
Change-Id: I1736b0ad31eea85ea853b310c52c5e6bf65c6e2a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To make ExitDNS cheaper.
Might not finish client-side support in December before 1.20, but at
least server support can start rolling out ahead of clients being
ready for it.
Tested with curl against peerapi.
Updates #1713
Change-Id: I676fed5fb1aef67e78c542a3bc93bddd04dd11fe
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Not done yet, but this move more of the outbound dial special casing
from random packages into tsdial, which aspires to be the one unified
place for all outbound dialing shenanigans.
Then this plumbs it all around, so everybody is ultimately
holding on to the same dialer.
As of this commit, macOS/iOS using an exit node should be able to
reach to the exit node's DoH DNS proxy over peerapi, doing the sockopt
to stay within the Network Extension.
A number of steps remain, including but limited to:
* move a bunch more random dialing stuff
* make netstack-mode tailscaled be able to use exit node's DNS proxy,
teaching tsdial's resolver to use it when an exit node is in use.
Updates #1713
Change-Id: I1e8ee378f125421c2b816f47bc2c6d913ddcd2f5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For now this just deletes the net/socks5/tssocks implementation (and
the DNSMap stuff from wgengine/netstack) and moves it into net/tsdial.
Then initialize a Dialer early in tailscaled, currently only use for the
outbound and SOCKS5 proxies. It will be plumbed more later. Notably, it
needs to get down into the DNS forwarder for exit node DNS forwading
in netstack mode. But it will also absorb all the peerapi setsockopt
and netns Dial and tlsdial complexity too.
Updates #1713
Change-Id: Ibc6d56ae21a22655b2fa1002d8fc3f2b2ae8b6df
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When this happens, it is incredibly noisy in the logs.
It accounts for about a third of all remaining
"unexpected" log lines from a recent investigation.
It's not clear that we know how to fix this,
we have a functioning workaround,
and we now have a (cheap and efficient) metric for this
that we can use for measurements.
So reduce the logging to approximately once per minute.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
wgengine/wgcfg: introduce wgcfg.NewDevice helper to disable roaming
at all call sites (one real plus several tests).
Fixestailscale/corp#3016.
Signed-off-by: David Anderson <danderson@tailscale.com>
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
And annotate magicsock as a start.
And add localapi and debug handlers with the Prometheus-format
exporter.
Updates #3307
Change-Id: I47c5d535fe54424741df143d052760387248f8d3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
github.com/go-multierror/multierror served us well.
But we need a few feature from it (implement Is),
and it's not worth maintaining a fork of such a small module.
Instead, I did a clean room implementation inspired by its API.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Using temporary netlink fork in github.com/tailscale/netlink until we
get the necessary changes upstream in either vishvananda/netlink
or jsimonetti/rtnetlink.
Updates #391
Change-Id: I6e1de96cf0750ccba53dabff670aca0c56dffb7c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Temporary measure until we switch to Go 1.18.
$ go run ./cmd/tailscale version
1.17.0-date.20211022
go version: go1.17
Updates #81
Change-Id: Ic82ebffa5f46789089e5fb9810b3f29e36a47f1a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
utils/winutil/vss contains just enough COM wrapping to query the Volume Shadow Copy service for snapshots.
WalkSnapshotsForLegacyStateDir is the friendlier interface that adds awareness of our actual use case,
mapping the snapshots and locating our legacy state directory.
Updates #3011
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
From https://github.com/tailscale/tailscale/pull/1919 with
edits by bradfitz@.
This change introduces a new storage provider for the state file. It
allows users to leverage AWS SSM parameter store natively within
tailscaled, like:
$ tailscaled --state=arn:aws:ssm:eu-west-1:123456789:parameter/foo
Known limitations:
- it is not currently possible to specific a custom KMS key ID
RELNOTE=tailscaled on Linux supports using AWS SSM for state
Edits-By: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Maxime VISONNEAU <maxime.visonneau@gmail.com>
This adds support for tailscaled to be an HTTP proxy server.
It shares the same backend dialing code as the SOCK5 server, but the
client protocol is HTTP (including CONNECT), rather than SOCKS.
Fixes#2289
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This was already possible on Linux if you ran tailscaled with --debug
(which runs net/http/pprof), but it requires the user have the Go
toolchain around.
Also, it wasn't possible on macOS, as there's no way to run the IPNExtension
with a debug server (it doesn't run tailscaled).
And on Windows it's super tedious: beyond what users want to do or
what we want to explain.
Instead, put it in "tailscale debug" so it works and works the same on
all platforms. Then we can ask users to run it when we're debugging something
and they can email us the output files.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
ProgramData has a permissive ACL. For us to safely store machine-wide
state information, we must set a more restrictive ACL on our state directory.
We set the ACL so that only talescaled's user (ie, LocalSystem) and the
Administrators group may access our directory.
We must include Administrators to ensure that logs continue to be easily
accessible; omitting that group would force users to use special tools to
log in interactively as LocalSystem, which is not ideal.
(Note that the ACL we apply matches the ACL that was used for LocalSystem's
AppData\Local).
There are two cases where we need to reset perms: One is during migration
from the old location to the new. The second case is for clean installations
where we are creating the file store for the first time.
Updates #2856
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
* Revert "Revert "types/key: add MachinePrivate and MachinePublic.""
This reverts commit 61c3b98a24.
Signed-off-by: David Anderson <danderson@tailscale.com>
* types/key: add ControlPrivate, with custom serialization.
ControlPrivate is just a MachinePrivate that serializes differently
in JSON, to be compatible with how the Tailscale control plane
historically serialized its private key.
Signed-off-by: David Anderson <danderson@tailscale.com>
Plumb throughout the codebase as a replacement for the mixed use of
tailcfg.MachineKey and wgkey.Private/Public.
Signed-off-by: David Anderson <danderson@tailscale.com>
Instead of using the legacy codepath, teach discoEndpoint to handle
peers that have a home DERP, but no disco key. We can still communicate
with them, but only over DERP.
Signed-off-by: David Anderson <danderson@tailscale.com>
rsc.io/goversion is really expensive.
Running version.ReadExe on tailscaled on darwin
allocates 47k objects, almost 11mb.
All we want is the module info. For that, all we need to do
is scan through the binary looking for the magic start/end strings
and then grab the bytes in between them.
We can do that easily and quickly with nothing but a 64k buffer.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Still very much a prototype (hard-coded IPs, etc) but should be
non-invasive enough to submit at this point and iterate from here.
Updates #2589
Co-Author: David Crawshaw <crawshaw@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Prior to Tailscale 1.12 it detected UPnP on any port.
Starting with Tailscale 1.11.x, it stopped detecting UPnP on all ports.
Then start plumbing its discovered Location header port number to the
code that was assuming port 5000.
Fixes#2109
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is a simplified rate limiter geared for exactly our needs:
A fast, mono.Time-based rate limiter for use in tstun.
It was generated by stripping down the x/time/rate rate limiter
to just our needs and switching it to use mono.Time.
It removes one time.Now call per packet.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
magicsock makes multiple calls to Now per packet.
Move to mono.Now. Changing some of the calls to
use package mono has a cascading effect,
causing non-per-packet call sites to also switch.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
There's a call to Now once per packet.
Move to mono.Now.
Though the current implementation provides high precision,
we document it to be coarse, to preserve the ability
to switch to a coarse monotonic time later.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
The previous algorithm used a map of all visited pointers.
The strength of this approach is that it quickly prunes any nodes
that we have ever visited before. The detriment of the approach
is that pruning is heavily dependent on the order that pointers
were visited. This is especially relevant for hashing a map
where map entries are visited in a non-deterministic manner,
which would cause the map hash to be non-deterministic
(which defeats the point of a hash).
This new algorithm uses a stack of all visited pointers,
similar to how github.com/google/go-cmp performs cycle detection.
When we visit a pointer, we push it onto the stack, and when
we leave a pointer, we pop it from the stack.
Before visiting a pointer, we first check whether the pointer exists
anywhere in the stack. If yes, then we prune the node.
The detriment of this approach is that we may hash a node more often
than before since we do not prune as aggressively.
The set of visited pointers up until any node is only the
path of nodes up to that node and not any other pointers
that may have been visited elsewhere. This provides us
deterministic hashing regardless of visit order.
We can now delete hashMapFallback and associated complexity,
which only exists because the previous approach was non-deterministic
in the presence of cycles.
This fixes a failure of the old algorithm where obviously different
values are treated as equal because the pruning was too aggresive.
See https://github.com/tailscale/tailscale/issues/2443#issuecomment-883653534
The new algorithm is slightly slower since it prunes less aggresively:
name old time/op new time/op delta
Hash-8 66.1µs ± 1% 68.8µs ± 1% +4.09% (p=0.000 n=19+19)
HashMapAcyclic-8 63.0µs ± 1% 62.5µs ± 1% -0.76% (p=0.000 n=18+19)
TailcfgNode-8 9.79µs ± 2% 9.88µs ± 1% +0.95% (p=0.000 n=19+17)
HashArray-8 643ns ± 1% 653ns ± 1% +1.64% (p=0.000 n=19+19)
However, a slower but more correct algorithm seems
more favorable than a faster but incorrect algorithm.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Add in UPnP portmapping, using goupnp library in order to get the UPnP client and run the
portmapping functions. This rips out anywhere where UPnP used to be in portmapping, and has a
flow separate from PMP and PCP.
RELNOTE=portmapper now supports UPnP mappings
Fixes#682
Updates #2109
Signed-off-by: julianknodt <julianknodt@gmail.com>
After allowing for custom DERP maps, it's convenient to be able to see their latency in
netcheck. This adds a query to the local tailscaled for the current DERPMap.
Updates #1264
Signed-off-by: julianknodt <julianknodt@gmail.com>
Move derpmap.Prod to a static JSON file (go:generate'd) instead,
to make its role explicit. And add a TODO about making dnsfallback
use an update-over-time DERP map file instead of a baked-in one.
Updates #1264
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a flag to the DERP server which specifies to verify clients through a local
tailscaled. It is opt-in, so should not affect existing clients, and is mainly intended for
users who want to run their own DERP servers. It assumes there is a local tailscaled running and
will attempt to hit it for peer status information.
Updates #1264
Signed-off-by: julianknodt <julianknodt@gmail.com>
The only connectivity an AWS Lambda container has is an IPv4 link-local
169.254.x.x address using NAT:
12: vtarget_1@if11: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
qdisc noqueue state UP group default qlen 1000
link/ether 7e:1c:3f:00:00:00 brd ff:ff:ff:ff:ff:ff link-netnsid 1
inet 169.254.79.1/32 scope global vtarget_1
valid_lft forever preferred_lft forever
If there are no other IPv4/v6 addresses available, and we are running
in AWS Lambda, allow IPv4 169.254.x.x addresses to be used.
----
Similarly, a Google Cloud Run container's only connectivity is
a Unique Local Address fddf:3978:feb1:d745::c001/128.
If there are no other addresses available then allow IPv6
Unique Local Addresses to be used.
We actually did this in an earlier release, but now refactor it to
work the same way as the IPv4 link-local support is being done.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
The cyolosecurity fork of certstore did not update its module name and
thus can only be used with a replace directive. This interferes with
installing using `go install` so I created a tailscale fork with an
updated module name.
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Pull in the latest version of wireguard-windows.
Switch to upstream wireguard-go.
This requires reverting all of our import paths.
Unfortunately, this has to happen at the same time.
The wireguard-go change is very low risk,
as that commit matches our fork almost exactly.
(The only changes are import paths, CI files, and a go.mod entry.)
So if there are issues as a result of this commit,
the first place to look is wireguard-windows changes.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
At the start of a dev cycle we'll upgrade all dependencies.
Done with:
$ for Dep in $(cat go.mod | perl -ne '/(\S+) v/ and print "$1\n"'); do go get $Dep@upgrade; done
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Yes, it printed, but that was an implementation detail for hashing.
And coming optimization will make it print even less.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
- Switch to our own simpler token bucket, since x/time/rate is missing
necessary stuff (can't provide your own time func; can't check the
current bucket contents) and it's overkill anyway.
- Add tests that actually include advancing time.
- Don't remove the rate limit on a message until there's enough room to
print at least two more of them. When we do, we'll also print how
many we dropped, as a contextual reminder that some were previously
lost. (This is more like how the Linux kernel does it.)
- Reformat the [RATE LIMITED] messages to be shorter, and to not
corrupt original message. Instead, we print the message, then print
its format string.
- Use %q instead of \"%s\", for more accurate parsing later, if the
format string contained quotes.
Fixes#1772
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
We had two separate code paths for the initial UDP listener bind
and any subsequent rebinds.
IPv6 got left out of the rebind code.
Rather than duplicate it there, unify the two code paths.
Then improve the resulting code:
* Rebind had nested listen attempts to try the user-specified port first,
and then fall back to :0 if that failed. Convert that into a loop.
* Initial bind tried only the user-specified port.
Rebind tried the user-specified port and 0.
But there are actually three ports of interest:
The one the user specified, the most recent port in use, and 0.
We now try all three in order, as appropriate.
* In the extremely rare case in which binding to port 0 fails,
use a dummy net.PacketConn whose reads block until close.
This will keep the wireguard-go receive func goroutine alive.
As a pleasant side-effect of this, if we decide that
we need to resuscitate #1796, it will now be much easier.
Fixes#1799
Co-authored-by: David Anderson <danderson@tailscale.com>
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
Assume it'll stay at 0 forever, so hard-code it
and delete code conditional on it being non-0.
Signed-off-by: Josh Bleecher Snyder <josharian@gmail.com>
NetworkManager fixed the bug that forced us to use NetworkManager
if it's programming systemd-resolved, and in the same release also
made NetworkManager ignore DNS settings provided for unmanaged
interfaces... Which breaks what we used to do. So, with versions
1.26.6 and above, we MUST NOT use NetworkManager to indirectly
program systemd-resolved, but thankfully we can talk to resolved
directly and get the right outcome.
Fixes#1788
Signed-off-by: David Anderson <danderson@tailscale.com>
This change implements Windows version of install-system-daemon and
uninstall-system-daemon subcommands. When running the commands the
user will install or remove Tailscale Windows service.
Updates #1232
Signed-off-by: Alex Brainman <alex.brainman@gmail.com>
They were scattered/duplicated in misc places before.
It can't be in the client package itself for circular dep reasons.
This new package is basically tailcfg but for localhost
communications, instead of to control.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Upstream wireguard-go has changed its receive model.
NewDevice now accepts a conn.Bind interface.
The conn.Bind is stateless; magicsock.Conns are stateful.
To work around this, we add a connBind type that supports
cheap teardown and bring-up, backed by a Conn.
The new conn.Bind allows us to specify a set of receive functions,
rather than having to shoehorn everything into ReceiveIPv4 and ReceiveIPv6.
This lets us plumbing DERP messages directly into wireguard-go,
instead of having to mux them via ReceiveIPv4.
One consequence of the new conn.Bind layer is that
closing the wireguard-go device is now indistinguishable
from the routine bring-up and tear-down normally experienced
by a conn.Bind. We thus have to explicitly close the magicsock.Conn
when the close the wireguard-go device.
One downside of this change is that we are reliant on wireguard-go
to call receiveDERP to process DERP messages. This is fine for now,
but is perhaps something we should fix in the future.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
The resolver still only supports a single upstream config, and
ipn/wgengine still have to split up the DNS config, but this moves
closer to unifying the DNS configs.
As a handy side-effect of the refactor, IPv6 MagicDNS records exist
now.
Signed-off-by: David Anderson <danderson@tailscale.com>
control/controlclient: sign RegisterRequest
Some customers wish to verify eligibility for devices to join their
tailnets using machine identity certificates. TLS client certs could
potentially fulfill this role but the initial customer for this feature
has technical requirements that prevent their use. Instead, the
certificate is loaded from the Windows local machine certificate store
and uses its RSA public key to sign the RegisterRequest message.
There is room to improve the flexibility of this feature in future and
it is currently only tested on Windows (although Darwin theoretically
works too), but this offers a reasonable starting place for now.
Updates tailscale/coral#6
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
So we can empty import the guts of cmd/tailscaled from another
module for go mod tidy reasons.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add proto to flowtrack.Tuple.
Add types/ipproto leaf package to break a cycle.
Server-side ACL work remains.
Updates #1516
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This reverts the revert commit 84aba349d9.
And changes us to use inet.af/netstack.
Updates #1518
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
gVisor fixed their google/gvisor#1446 so we can include gVisor mode
on 32-bit machines.
A few minor upstream API changes, as normal.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
