This uses a neat little tool to dump the output of DNS queries to
standard out. This is the first end-to-end test of DNS that runs against
actual linux systems. The /etc/resolv.conf test may look superflous,
however this will help for correlating system state if one of the DNS
tests fails.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
Fix a few test printing issues when tests fail.
Qemu console output is super useful when something is wrong in the
harness and we cannot even bring up the tests.
Also useful for figuring out where all the time goes in tests.
A little noisy, but not too noisy as long as you're only running one VM
as part of the tests, which is my plan.
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
Also remove extra distros for now.
We can bring them back later if useful.
Though our most important distros are these two Ubuntu, debian stable,
and Raspbian (not currently supported).
And before doing more Linux, we should do Windows.
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
The VM test has two tailscaled instances running and interleaves the
logs. Without a prefix it is impossible to figure out what is going on.
It might be even better to include the [ABCD] node prefix here as well.
Unfortunately lots of interesting logs happen before tailscaled has a
node key, so it wouldn't be a replacement for a short ID.
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
By default httptest listens only on the loopback adapter.
Instead, listen on the IP the user asked for.
The VM test needs this, as it wants to start DERP and STUN
servers on the host that can be reached by guest VMs.
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
This is useful for manual performance testing
of networks with many nodes.
I imagine it'll grow more knobs over time.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
This prevents centos tests from timing out because sshd does reverse dns
lookups on every session being established instead of doing it once on
the acutal ssh connection being established. This is odd. Appending this
to the sshd config and restarting it seems to fix it though.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
Filch doesn't like having multiple processes competing
for the same log files (#937).
Parallel integration tests were all using the same log files.
Add a TS_LOGS_DIR env var that the integration test can use
to use separate log files per test.
Fixes#2269
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
The maximum unix domain socket path length on darwin is 104 bytes,
including the trailing NUL.
On my machine, the path created by some newly added tests (6eecf3c9)
was too long, resulting in cryptic test failures.
Shorten the names of the tests, and add a check to make
the diagnosis easier next time.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
With this, I can now:
* install Tailscale
* stop the GUI
* net stop Tailscale
* net start Tailscale
* tailscale up --unattended
(where the middle three steps simulate what would happen on a Windows
Server Core machine without a GUI)
Fixes#2137
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We have different deps depending on the platform.
If we pick a privileged platform, we'll miss some deps.
If we use the union of all platforms, the integration test
won't compile on some platforms, because it'll import
packages that don't compile on that platform.
Give in to the madness and give each platform its own deps file.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
This moves the distribution definitions into a maintainable hujson file
instead of just existing as constants in `distros.go`. Comments are
maintained from the inline definitions.
This uses jennifer[1] for hygenic source tree creation. This allows us
to generate a unique top-level test for each VM run. This should
hopefully help make the output of `go test` easier to read.
This also separates each test out into its own top-level test so that we
can better track the time that each distro takes. I really wish there
was a way to have the `test_codegen.go` file _always_ run as a part of
the compile process instead of having to rely on people remembering to
run `go generate`, but I am limited by my tools.
This will let us remove the `-distro-regex` flag and use `go test -run`
to pick which distros are run.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
Add in UPnP portmapping, using goupnp library in order to get the UPnP client and run the
portmapping functions. This rips out anywhere where UPnP used to be in portmapping, and has a
flow separate from PMP and PCP.
RELNOTE=portmapper now supports UPnP mappings
Fixes#682
Updates #2109
Signed-off-by: julianknodt <julianknodt@gmail.com>
Apparently this test was flaking because I critically misunderstood how
the kernel buffers UDP packets for senders. I'm trying to send more UDP
packets and will see if that helps.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
This test used to try to run this only once, but this variant of the
test attempts to run `tailscale status` up to 6 times in a loop with
exponential backoff.
This fixes the flakiness found in previous instances of this test.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
Regression from 6d10655dc3, which added
UpdatePrefs but didn't write it out to disk.
I'd planned on adding tests to state_test.go which is why I'd earlier
added 46896a9311 to prepare for making
such persistence tests easier to write, but turns out state_test.go
didn't even test UpdatePrefs, so I'm staying out of there.
Instead, this is tested using integration tests.
Fixes#2321
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
My spatial memory functions poorly with large files and the vms_test.go
file recently surpassed the point where it functions adequately. This
patch splits up vms_test.go into more files to make my spatial memory
function like I need it to.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
Split from https://github.com/tailscale/tailscale/pull/2376.
This adds IPv6 support to testcontrol so each member of the tailscale
network gets an IPv6 address too.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
The DERPTestPort int meant two things before: which port to use, and
whether to disable TLS verification. Users would like to set the port
without disabling TLS, so break it into two options.
Updates #1264
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To avoid the generated nixos disk images from becoming immune from the
GC, I delete the symlink to the nix store at the end of tests.
`t.Cleanup` runs at the end of a test. I changed this part of the code
to have a separate timer for how long it takes to run NixOS builds, but
I did that by using a subtest. This means that it was creating the NixOS
image, deleting its symlink and then trying to use that symlink to find
the resulting disk image, making the whole thing ineffectual.
This was a mistake. I am reverting this change made in
https://github.com/tailscale/tailscale/pull/2360 to remove this layer of
subtesting.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
This tests incoming and outgoing UDP traffic. It would test incoming UDP
traffic however our socks server doesn't seem to allow for connecting to
destinations over UDP. When the socks server gets that support the
incoming test should pass without issue.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
This adapts the existing in-process logcatcher from tstest/integration
into a public type and uses it on the side of testcontrol. This also
fixes a bug in the Alpine Linux OpenRC unit that makes every value in
`/etc/default/tailscaled` exported into tailscaled's environment, a-la
systemd [Service].EnviromentFile.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
This does a few things:
1. Rewrites the tests so that we get a log of what individual tests
failed at the end of a test run.
2. Adds a test that runs an HTTP server via the tester tailscale node and
then has the VMs connect to that over Tailscale.
3. Dials the VM over Tailscale and ensures it answers SSH requests.
4. Other minor framework refactoring.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
Oracle Linux[1] is a CentOS fork. It is not very special. I am adding it
to the integration jungle because I am adding it to pkgs and the website
directions.
[1]: https://www.oracle.com/linux/
Signed-off-by: Christine Dodrill <xe@tailscale.com>
It was caching too aggressively, as it didn't see our deps due to our
running "go install tailscaled" as a child process.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This makes sure `tailscale status` and `tailscale ping` works. It also
switches goexpect to use a batch instead of manually banging out each
line, which makes the tests so much easier to read.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
This puts nix build logs on the filesystem so that we can debug them
later. This also disables nixos unstable until
https://github.com/NixOS/nixpkgs/issues/128783 is fixed.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
After allowing for custom DERP maps, it's convenient to be able to see their latency in
netcheck. This adds a query to the local tailscaled for the current DERPMap.
Updates #1264
Signed-off-by: julianknodt <julianknodt@gmail.com>
