This required sharing the dropped packet metric between two packages
(tstun and magicsock), so I've moved its definition to util/usermetric.
Updates tailscale/corp#22075
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
We make setting.Snapshot JSON-marshallable in preparation for returning it from the LocalAPI.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We add setting.RawValue, a new type that facilitates unmarshalling JSON numbers and arrays
as uint64 and []string (instead of float64 and []any) for policy setting values.
We then use it to make setting.RawItem JSON-marshallable and update the tests.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In this PR, we implement (but do not use yet, pending #13727 review) a syspolicy/source.Store
that reads policy settings from environment variables. It converts a CamelCase setting.Key,
such as AuthKey or ExitNodeID, to a SCREAMING_SNAKE_CASE, TS_-prefixed environment
variable name, such as TS_AUTH_KEY and TS_EXIT_NODE_ID. It then looks up the variable
and attempts to parse it according to the expected value type. If the environment variable
is not set, the policy setting is considered not configured in this store (the syspolicy package
will still read it from other sources). Similarly, if the environment variable has an invalid value
for the setting type, it won't be used (though the reported/logged error will differ).
Updates #13193
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In this PR, we update the syspolicy package to utilize syspolicy/rsop under the hood,
and remove syspolicy.CachingHandler, syspolicy.windowsHandler and related code
which is no longer used.
We mark the syspolicy.Handler interface and RegisterHandler/SetHandlerForTest functions
as deprecated, but keep them temporarily until they are no longer used in other repos.
We also update the package to register setting definitions for all existing policy settings
and to register the Registry-based, Windows-specific policy stores when running on Windows.
Finally, we update existing internal and external tests to use the new API and add a few more
tests and benchmarks.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In this PR we add syspolicy/rsop package that facilitates policy source registration
and provides access to the resultant policy merged from all registered sources for a
given scope.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Thus new function allows constructing vizerrors that combine a message
appropriate for display to users with a wrapped underlying error.
Updates tailscale/corp#23781
Signed-off-by: Percy Wegmann <percy@tailscale.com>
The AddSNATRuleForDst rule was adding a new rule each time it was called including:
- if a rule already existed
- if a rule matching the destination, but with different desired source already existed
This was causing issues especially for the in-progress egress HA proxies work,
where the rules are now refreshed more frequently, so more redundant rules
were being created.
This change:
- only creates the rule if it doesn't already exist
- if a rule for the same dst, but different source is found, delete it
- also ensures that egress proxies refresh firewall rules
if the node's tailnet IP changes
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/containerboot,kube,util/linuxfw: configure kube egress proxies to route to 1+ tailnet targets
This commit is first part of the work to allow running multiple
replicas of the Kubernetes operator egress proxies per tailnet service +
to allow exposing multiple tailnet services via each proxy replica.
This expands the existing iptables/nftables-based proxy configuration
mechanism.
A proxy can now be configured to route to one or more tailnet targets
via a (mounted) config file that, for each tailnet target, specifies:
- the target's tailnet IP or FQDN
- mappings of container ports to which cluster workloads will send traffic to
tailnet target ports where the traffic should be forwarded.
Example configfile contents:
{
"some-svc": {"tailnetTarget":{"fqdn":"foo.tailnetxyz.ts.net","ports"{"tcp:4006:80":{"protocol":"tcp","matchPort":4006,"targetPort":80},"tcp:4007:443":{"protocol":"tcp","matchPort":4007,"targetPort":443}}}}
}
A proxy that is configured with this config file will configure firewall rules
to route cluster traffic to the tailnet targets. It will then watch the config file
for updates as well as monitor relevant netmap updates and reconfigure firewall
as needed.
This adds a bunch of new iptables/nftables functionality to make it easier to dynamically update
the firewall rules without needing to restart the proxy Pod as well as to make
it easier to debug/understand the rules:
- for iptables, each portmapping is a DNAT rule with a comment pointing
at the 'service',i.e:
-A PREROUTING ! -i tailscale0 -p tcp -m tcp --dport 4006 -m comment --comment "some-svc:tcp:4006 -> tcp:80" -j DNAT --to-destination 100.64.1.18:80
Additionally there is a SNAT rule for each tailnet target, to mask the source address.
- for nftables, a separate prerouting chain is created for each tailnet target
and all the portmapping rules are placed in that chain. This makes it easier
to look up rules and delete services when no longer needed.
(nftables allows hooking a custom chain to a prerouting hook, so no extra work
is needed to ensure that the rules in the service chains are evaluated).
The next steps will be to get the Kubernetes Operator to generate
the configfile and ensure it is mounted to the relevant proxy nodes.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
this commit changes usermetrics to be non-global, this is a building
block for correct metrics if a go process runs multiple tsnets or
in tests.
Updates #13420
Updates tailscale/corp#22075
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
And update a few callers as examples of motivation. (there are a
couple others, but these are the ones where it's prettier)
Updates #cleanup
Change-Id: Ic8c5cb7af0a59c6e790a599136b591ebe16d38eb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When the desired netfilter mode was unset, we would always try
to use the `iptables` binary. In such cases if iptables was not found,
tailscaled would just crash as seen in #13440. To work around this, in those
cases check if the `iptables` binary even exists and if it doesn't fall back
to the nftables implementation.
Verified that it works on stock Ubuntu 24.04.
Updates #5621
Updates #8555
Updates #8762Fixes#13440
Signed-off-by: Maisem Ali <maisem@tailscale.com>
With the upcoming syspolicy changes, it's imperative that all syspolicy keys are defined in the syspolicy package
for proper registration. Otherwise, the corresponding policy settings will not be read.
This updates a couple of places where we still use string literals rather than syspolicy consts.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We add package defining interfaces for policy stores, enabling creation of policy sources
and reading settings from them. It includes a Windows-specific PlatformPolicyStore for GP and MDM
policies stored in the Registry, and an in-memory TestStore for testing purposes.
We also include an internal package that tracks and reports policy usage metrics when a policy setting
is read from a store. Initially, it will be used only on Windows and Android, as macOS, iOS, and tvOS
report their own metrics. However, we plan to use it across all platforms eventually.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This commit adds a new usermetric package and wires
up metrics across the tailscale client.
Updates tailscale/corp#22075
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
We have several checked type assertions to *types.Named in both cmd/cloner and cmd/viewer.
As Go 1.23 updates the go/types package to produce Alias type nodes for type aliases,
these type assertions no longer work as expected unless the new behavior is disabled
with gotypesalias=0.
In this PR, we add codegen.NamedTypeOf(t types.Type), which functions like t.(*types.Named)
but also unrolls type aliases. We then use it in place of type assertions in the cmd/cloner and
cmd/viewer packages where appropriate.
We also update type switches to include *types.Alias alongside *types.Named in relevant cases,
remove *types.Struct cases when switching on types.Type.Underlying and update the tests
with more cases where type aliases can be used.
Updates #13224
Updates #12912
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Go 1.23 updates the go/types package to produce Alias type nodes for type aliases, unless disabled with gotypesalias=0.
This new default behavior breaks codegen.LookupMethod, which uses checked type assertions to types.Named and
types.Interface, as only named types and interfaces have methods.
In this PR, we update codegen.LookupMethod to perform method lookup on the right-hand side of the alias declaration
and clearly switch on the supported type nodes types. We also improve support for various edge cases, such as when an alias
is used as a type parameter constraint, and add tests for the LookupMethod function.
Additionally, we update cmd/viewer/tests to include types with aliases used in type fields and generic type constraints.
Updates #13224
Updates #12912
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Updates tailscale/corp#22120
Adds the ability to start the backend by reading an authkey stored in the syspolicy database (MDM). This is useful for devices that are provisioned in an unattended fashion.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Package setting contains types for defining and representing policy settings.
It facilitates the registration of setting definitions using Register and RegisterDefinition,
and the retrieval of registered setting definitions via Definitions and DefinitionOf.
This package is intended for use primarily within the syspolicy package hierarchy,
and added in a preparation for the next PRs.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
It was returning a nil `*iptablesRunner` instead of a
nil `NetfilterRunner` interface which would then fail
checks later.
Fixes#13012
Signed-off-by: Maisem Ali <maisem@tailscale.com>
All wasi* are GOARCH wasm, so check that instead.
Updates #12732
Change-Id: Id3cc346295c1641bcf80a6c5eb1ad65488509656
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Remove the restriction that getent is skipped on non-Linux unixes.
Improve validation of the parsed output from getent, in case unknown
systems return unusable information.
Fixes#12730.
Signed-off-by: Ross Williams <ross@ross-williams.net>
The standard library includes these for strings and byte slices,
but it lacks similar functions for generic slices of comparable types.
Although they are not as commonly used, these functions are useful
in scenarios such as working with field index sequences (i.e., []int)
via reflection.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This adds support for container-like types such as Container[T] that
don't explicitly specify a view type for T. Instead, a package implementing
a container type should also implement and export a ContainerView[T, V] type
and a ContainerViewOf(*Container[T]) ContainerView[T, V] function, which
returns a view for the specified container, inferring the element view type V
from the element type T.
Updates #12736
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This adds support for generic types and interfaces to our cloner and viewer codegens.
It updates these packages to determine whether to make shallow or deep copies based
on the type parameter constraints. Additionally, if a template parameter or an interface
type has View() and Clone() methods, we'll use them for getters and the cloner of the
owning structure.
Updates #12736
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This adds a package with GP-related functions and types to be used in the future PRs.
It also updates nrptRuleDatabase to use the new package instead of its own gpNotificationWatcher implementation.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
cmd/containerboot,cmd/k8s-operator: enable IPv6 for fqdn egress proxies
Don't skip installing egress forwarding rules for IPv6 (as long as the host
supports IPv6), and set headless services `ipFamilyPolicy` to
`PreferDualStack` to optionally enable both IP families when possible. Note
that even with `PreferDualStack` set, testing a dual-stack GKE cluster with
the default DNS setup of kube-dns did not correctly set both A and
AAAA records for the headless service, and instead only did so when
switching the cluster DNS to Cloud DNS. For both IPv4 and IPv6 to work
simultaneously in a dual-stack cluster, we require headless services to
return both A and AAAA records.
If the host doesn't support IPv6 but the FQDN specified only has IPv6
addresses available, containerboot will exit with error code 1 and an
error message because there is no viable egress route.
Fixes#12215
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
We cannot directly pass a flat domain name into NetUserGetInfo; we must
resolve the address of a domain controller first.
This PR implements the appropriate resolution mechanisms to do that, and
also exposes a couple of new utility APIs for future needs.
Fixes#12627
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This PR ties together pseudoconsoles, user profiles, s4u logons, and
process creation into what is (hopefully) a simple API for various
Tailscale services to obtain Windows access tokens without requiring
knowledge of any Windows passwords. It works both for domain-joined
machines (Kerberos) and non-domain-joined machines. The former case
is fairly straightforward as it is fully documented. OTOH, the latter
case is not documented, though it is fully defined in the C headers in
the Windows SDK. The documentation blanks were filled in by reading
the source code of Microsoft's Win32 port of OpenSSH.
We need to do a bit of acrobatics to make conpty work correctly while
creating a child process with an s4u token; see the doc comments above
startProcessInternal for details.
Updates #12383
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Fix regression from bd93c3067e where I didn't notice the
32-bit test failure was real and not its usual slowness-related
regression. Yay failure blindness.
Updates #12526
Change-Id: I00e33bba697e2cdb61a0d76a71b62406f6c2eeb9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The control plane hasn't sent it to clients in ages.
Updates tailscale/corp#20965
Change-Id: I1d71a4b6dd3f75010a05c544ee39827837c30772
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I noticed we were allocating these every time when they could just
share the same memory. Rather than document ownership, just lock it
down with a view.
I was considering doing all of the fields but decided to just do this
one first as test to see how infectious it became. Conclusion: not
very.
Updates #cleanup (while working towards tailscale/corp#20514)
Change-Id: I8ce08519de0c9a53f20292adfbecd970fe362de0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fixestailscale/corp#18366.
This PR provides serial number collection on iOS, by allowing system administrators to pass a `DeviceSerialNumber` MDM key which can be read by the `posture` package in Go.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
S4U logons do not automatically load the associated user profile. In this
PR we add UserProfile to handle that part. Windows docs indicate that
we should try to resolve a remote profile path when present, so we attempt
to do so when the local computer is joined to a domain.
Updates #12383
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
