This commit adds a new usermetric package and wires
up metrics across the tailscale client.
Updates tailscale/corp#22075
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
On a major link change the LAN routes may change, so on linkChange where
ChangeDelta.Major, we need to call authReconfig to ensure that new
routes are observed and applied.
Updates tailscale/corp#22574
Signed-off-by: James Tucker <james@tailscale.com>
This is the equivalent of quad-100, but for IPv6. This is technically
already contained in the Tailscale IPv6 ULA prefix, but that is only
installed when remote peers are visible via control with contained
addrs. The service addr should always be reachable.
Updates #1152
Signed-off-by: Jordan Whited <jordan@tailscale.com>
And convert a few callers as an example, but nowhere near all.
Updates #12912
Change-Id: I5eaa12a29a6cd03b58d6f1072bd27bc0467852f2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In Tailnet Lock, there is an implicit limit on the number of rotation
signatures that can be chained before the signature becomes too long.
This program helps tailnet admins to identify nodes that have signatures
with long chains and prints commands to re-sign those node keys with a
fresh direct signature. It's a temporary mitigation measure, and we will
remove this tool as we design and implement a long-term approach for
rotation signatures.
Example output:
```
2024/08/20 18:25:03 Self: does not need re-signing
2024/08/20 18:25:03 Visible peers with valid signatures:
2024/08/20 18:25:03 Peer xxx2.yy.ts.net. (100.77.192.34) nodeid=nyDmhiZiGA11KTM59, current signature kind=direct: does not need re-signing
2024/08/20 18:25:03 Peer xxx3.yy.ts.net. (100.84.248.22) nodeid=ndQ64mDnaB11KTM59, current signature kind=direct: does not need re-signing
2024/08/20 18:25:03 Peer xxx4.yy.ts.net. (100.85.253.53) nodeid=nmZfVygzkB21KTM59, current signature kind=rotation: chain length 4, printing command to re-sign
tailscale lock sign nodekey:530bddbfbe69e91fe15758a1d6ead5337aa6307e55ac92dafad3794f8b3fc661 tlpub:4bf07597336703395f2149dce88e7c50dd8694ab5bbde3d7c2a1c7b3e231a3c2
```
To support this, the NetworkLockStatus localapi response now includes
information about signatures of all peers rather than just the invalid
ones. This is not displayed by default in `tailscale lock status`, but
will be surfaced in `tailscale lock status --json`.
Updates #13185
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Updates tailscale/corp#22120
Adds the ability to start the backend by reading an authkey stored in the syspolicy database (MDM). This is useful for devices that are provisioned in an unattended fashion.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
This prevents two things:
1. Crashing if there's no response body
2. Sending a nonsensical 0 response status code
Updates tailscale/corp#22357
Signed-off-by: Percy Wegmann <percy@tailscale.com>
* cmd/tsidp: add funnel support
Updates #10263.
Signed-off-by: Naman Sood <mail@nsood.in>
* look past funnel-ingress-node to see who we're authenticating
Signed-off-by: Naman Sood <mail@nsood.in>
* fix comment typo
Signed-off-by: Naman Sood <mail@nsood.in>
* address review feedback, support Basic auth for /token
Turns out you need to support Basic auth if you do client ID/secret
according to OAuth.
Signed-off-by: Naman Sood <mail@nsood.in>
* fix typos
Signed-off-by: Naman Sood <mail@nsood.in>
* review fixes
Signed-off-by: Naman Sood <mail@nsood.in>
* remove debugging log
Signed-off-by: Naman Sood <mail@nsood.in>
* add comments, fix header
Signed-off-by: Naman Sood <mail@nsood.in>
---------
Signed-off-by: Naman Sood <mail@nsood.in>
Fixestailscale/tailscale#12973
Updates tailscale/tailscale#1634
There was a logic issue in the captive detection code we shipped in https://github.com/tailscale/tailscale/pull/12707.
Assume a captive portal has been detected, and the user notified. Upon switching to another Wi-Fi that does *not* have a captive portal, we were issuing a signal to interrupt any pending captive detection attempt. However, we were not also setting the `captive-portal-detected` warnable to healthy. The result was that any "captive portal detected" alert would not be cleared from the UI.
Also fixes a broken log statement value.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Updates tailscale/tailscale#1634
This PR introduces a new `captive-portal-detected` Warnable which is set to an unhealthy state whenever a captive portal is detected on the local network, preventing Tailscale from connecting.
ipn/ipnlocal: fix captive portal loop shutdown
Change-Id: I7cafdbce68463a16260091bcec1741501a070c95
net/captivedetection: fix mutex misuse
ipn/ipnlocal: ensure that we don't fail to start the timer
Change-Id: I3e43fb19264d793e8707c5031c0898e48e3e7465
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
wgengine/magicsock,ipn: allow setting static node endpoints via tailscaled config file.
Adds a new StaticEndpoints field to tailscaled config
that can be used to statically configure the endpoints
that the node advertizes. This field will replace
TS_DEBUG_PRETENDPOINTS env var that can be used to achieve the same.
Additionally adds some functionality that ensures that endpoints
are updated when configfile is reloaded.
Also, refactor configuring/reconfiguring components to use the
same functionality when configfile is parsed the first time or
subsequent times (after reload). Previously a configfile reload
did not result in resetting of prefs. Now it does- but does not yet
tell the relevant components to consume the new prefs. This is to
be done in a follow-up.
Updates tailscale/tailscale#12578
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Some users run "tailscale cert" in a cron job to renew their
certificates on disk. The time until the next cron job run may be long
enough for the old cert to expire with our default heristics.
Add a `--min-validity` flag which ensures that the returned cert is
valid for at least the provided duration (unless it's longer than the
cert lifetime set by Let's Encrypt).
Updates #8725
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
To match the format of exit node suggestions and ensure that the result
is not ambiguous, relax exit node CLI selection to permit using a FQDN
including the trailing dot.
Updates #12618
Change-Id: I04b9b36d2743154aa42f2789149b2733f8555d3f
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
This adds support for generic types and interfaces to our cloner and viewer codegens.
It updates these packages to determine whether to make shallow or deep copies based
on the type parameter constraints. Additionally, if a template parameter or an interface
type has View() and Clone() methods, we'll use them for getters and the cloner of the
owning structure.
Updates #12736
Signed-off-by: Nick Khyl <nickk@tailscale.com>
If an optional `hwaddrs` URL parameter is present, add network interface
hardware addresses to the posture identity response.
Just like with serial numbers, this requires client opt-in via MDM or
`tailscale set --posture-checking=true`
(https://tailscale.com/kb/1326/device-identity)
Updates tailscale/corp#21371
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
We added a workaround for --wait, but didn't confirm the other flags,
which were added in systemd 235 and 236. Check systemd version for
deciding when to set all 3 flags.
Fixes#12136
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
While `clientupdate.Updater` won't be able to apply updates on macsys,
we use `clientupdate.CanAutoUpdate` to gate the EditPrefs endpoint in
localAPI. We should allow the GUI client to set AutoUpdate.Apply on
macsys for it to properly get reported to the control plane. This also
allows the tailnet-wide default for auto-updates to propagate to macsys
clients.
Updates https://github.com/tailscale/corp/issues/21339
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Detection of duplicate Network Lock signature chains added in
01847e0123 failed to account for chains
originating with a SigCredential signature, which is used for wrapped
auth keys. This results in erroneous removal of signatures that
originate from the same re-usable auth key.
This change ensures that multiple nodes created by the same re-usable
auth key are not getting filtered out by the network lock.
Updates tailscale/corp#19764
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
This change moves handling of wrapped auth keys to the `tka` package and
adds a test covering auth key originating signatures (SigCredential) in
netmap.
Updates tailscale/corp#19764
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
When auto-udpates are enabled, we don't need to nag users to update
after a new release, before we release auto-updates.
Updates https://github.com/tailscale/corp/issues/20081
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This is not valid in many situations, specifically when running a local astro site that listens on localhost, but ignores 127.0.0.1
Fixes: https://github.com/tailscale/tailscale/issues/12201
Signed-off-by: Josh McKinney <joshka@users.noreply.github.com>
This turns the checklocks workflow into a real check, and adds
annotations to a few basic packages as a starting point.
Updates #12625
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I2b0185bae05a843b5257980fc6bde732b1bdd93f
The context can get canceled during backoff, and binding after that
makes the listener impossible to close afterwards.
Fixes#12620.
Signed-off-by: Naman Sood <mail@nsood.in>
We can observe a data race in tests when logging after a test is
finished. `b.onHealthChange` is called in a goroutine after being
registered with `health.Tracker.RegisterWatcher`, which calls callbacks
in `setUnhealthyLocked` in a new goroutine.
See: https://github.com/tailscale/tailscale/actions/runs/9672919302/job/26686038740
Updates #12054
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ibf22cc994965d88a9e7236544878d5373f91229e
So non-local users (e.g. Kerberos on FreeIPA) on Linux can be looked
up. Our default binaries are built with pure Go os/user which only
supports the classic /etc/passwd and not any libc-hooked lookups.
Updates #12601
Change-Id: I9592db89e6ca58bf972f2dcee7a35fbf44608a4f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Fixestailscale/corp#20971
We added some Warnables for DERP failure situations, but their Text currently spits out the DERP region ID ("10") in the UI, which is super ugly. It would be better to provide the RegionName of the DERP region that is failing. We can do so by storing a reference to the last-known DERP map in the health package whenever we fetch one, and using it when generating the notification text.
This way, the following message...
> Tailscale could not connect to the relay server '10'. The server might be temporarily unavailable, or your Internet connection might be down.
becomes:
> Tailscale could not connect to the 'Seattle' relay server. The server might be temporarily unavailable, or your Internet connection might be down.
which is a lot more user-friendly.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Previously, we were registering TCP and UDP connections in the same map,
which could result in erroneously removing a mapping if one of the two
connections completes while the other one is still active.
Add a "proto string" argument to these functions to avoid this.
Additionally, take the "proto" argument in LocalAPI, and plumb that
through from the CLI and add a new LocalClient method.
Updates tailscale/corp#20600
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I35d5efaefdfbf4721e315b8ca123f0c8af9125fb
This moves NewContainsIPFunc from tsaddr to new ipset package.
And wgengine/filter types gets split into wgengine/filter/filtertype,
so netmap (and thus the CLI, etc) doesn't need to bring in ipset,
bart, etc.
Then add a test making sure the CLI deps don't regress.
Updates #1278
Change-Id: Ia246d6d9502bbefbdeacc4aef1bed9c8b24f54d5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This abstraction provides a nicer way to work with
maps of slices without having to write out three long type
params.
This also allows it to provide an AsMap implementation which
copies the map and the slices at least.
Updates tailscale/corp#20910
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Updates tailscale/tailscale#4136
This PR is the first round of work to move from encoding health warnings as strings and use structured data instead. The current health package revolves around the idea of Subsystems. Each subsystem can have (or not have) a Go error associated with it. The overall health of the backend is given by the concatenation of all these errors.
This PR polishes the concept of Warnable introduced by @bradfitz a few weeks ago. Each Warnable is a component of the backend (for instance, things like 'dns' or 'magicsock' are Warnables). Each Warnable has a unique identifying code. A Warnable is an entity we can warn the user about, by setting (or unsetting) a WarningState for it. Warnables have:
- an identifying Code, so that the GUI can track them as their WarningStates come and go
- a Title, which the GUIs can use to tell the user what component of the backend is broken
- a Text, which is a function that is called with a set of Args to generate a more detailed error message to explain the unhappy state
Additionally, this PR also begins to send Warnables and their WarningStates through LocalAPI to the clients, using ipn.Notify messages. An ipn.Notify is only issued when a warning is added or removed from the Tracker.
In a next PR, we'll get rid of subsystems entirely, and we'll start using structured warnings for all errors affecting the backend functionality.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Add a new TS_EXPERIMENTAL_ENABLE_FORWARDING_OPTIMIZATIONS env var
that can be set for tailscale/tailscale container running as
a subnet router or exit node to enable UDP GRO forwarding
for improved performance.
See https://tailscale.com/kb/1320/performance-best-practices#linux-optimizations-for-subnet-routers-and-exit-nodes
This is currently considered an experimental approach;
the configuration support is partially to allow further experimentation
with containerized environments to evaluate the performance
improvements.
Updates tailscale/tailscale#12295
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The last suggested exit node needs to be incorporated in the decision
making process when a new suggestion is requested, but currently it is
not quite right: it'll be used if the suggestion code has an error or a
netmap is unavailable, but it won't be used otherwise.
Instead, this makes the last suggestion into a tiebreaker when making a
random selection between equally-good options. If the last suggestion
does not make it to the final selection pool, then a different
suggestion will be made.
Since LocalBackend.SuggestExitNode is back to being a thin shim that
sets up the parameters to suggestExitNode, it no longer needs a test.
Its test was unable to be comprehensive anyway as the code being tested
contains an uncontrolled random number generator.
Updates tailscale/corp#19681
Change-Id: I94ecc9a0d1b622de3df4ef90523f1d3e67b4bfba
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
We assume most containers are immutable and don't expect tailscale
running in them to auto-update. But there's no reason to prohibit it
outright.
Ignore the tailnet-wide default auto-update setting in containers, but
allow local users to turn on auto-updates via the CLI.
RELNOTE=Auto-updates are allowed in containers, but ignore the tailnet-wide default.
Fixes#12292
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Rather than building a new suggested exit node set every time, compute
it once on first use. Currently, syspolicy ensures that values do not
change without a restart anyway.
Since the set is being constructed in a separate func now, the test code
that manipulates syspolicy can live there, and the TestSuggestExitNode
can now run in parallel with other tests because it does not have global
dependencies.
Updates tailscale/corp#19681
Change-Id: Ic4bb40ccc91b671f9e542bd5ba9c96f942081515
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Clean up the updater goroutine on shutdown, in addition to doing that on
backend state change. This fixes a goroutine leak on shutdown in tests.
Updates #cleanup
