* ipn,tailcfg: add VIPService struct and c2n to fetch them from client
Updates tailscale/corp#22743, tailscale/corp#22955
Signed-off-by: Naman Sood <mail@nsood.in>
* more review fixes
Signed-off-by: Naman Sood <mail@nsood.in>
* don't mention PeerCapabilityServicesDestination since it's currently unused
Signed-off-by: Naman Sood <mail@nsood.in>
---------
Signed-off-by: Naman Sood <mail@nsood.in>
Back in the day this testcontrol package only spoke the
nacl-boxed-based control protocol, which used this.
Then we added ts2021, which didn't, but still sometimes used it.
Then we removed the old mode and didn't remove this parameter
in 2409661a0d.
Updates #11585
Change-Id: Ifd290bd7dbbb52b681b3599786437a15bc98b6a5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously we required the program to be running in a test or have
TS_CONTROL_IS_PLAINTEXT_HTTP before we disabled its https fallback
on "http" schema control URLs to localhost with ports.
But nobody accidentally does all three of "http", explicit port
number, localhost and doesn't mean it. And when they mean it, they're
testing a localhost dev control server (like I was) and don't want 443
getting involved.
As of the changes for #13597, this became more annoying in that we
were trying to use a port which wasn't even available.
Updates #13597
Change-Id: Icd00bca56043d2da58ab31de7aa05a3b269c490f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
https://portsmouthbrewery.com/shilling-scale/
Any scale that includes "wee heavy" is a scale worth including.
Updates #words
Change-Id: I85fd7a64cf22e14f686f1093a220cb59c43e46ba
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We currently annotate pods with a hash of the tailscaled config so that
we can trigger pod restarts whenever it changes. However, the hash
updates more frequently than is necessary causing more restarts than is
necessary. This commit removes two causes; scaling up/down and removing
the auth key after pods have initially authed to control. However, note
that pods will still restart on scale-up/down because of the updated set
of volumes mounted into each pod. Hopefully we can fix that in a planned
follow-up PR.
Updates #13406
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
This gets close to all of the remaining ones.
Updates #12912
Change-Id: I9c672bbed2654a6c5cab31e0cbece6c107d8c6fa
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It doesn't need a Clone method, like a time.Time, etc.
And then, because Go 1.23+ uses unique.Handle internally for
the netip package types, we can remove those special cases.
Updates #14058 (pulled out from that PR)
Updates tailscale/corp#24485
Change-Id: Iac3548a9417ccda5987f98e0305745a6e178b375
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Perhaps I was too opimistic in #13323 thinking we won't need logs for
this. Let's log a summary of the response without logging specific
identifiers.
Updates tailscale/corp#24437
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Or unless the new "ts_debug_websockets" build tag is set.
Updates #1278
Change-Id: Ic4c4f81c1924250efd025b055585faec37a5491d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Otherwise all the clients only using control/controlhttp for the
ts2021 HTTP client were also pulling in WebSocket libraries, as the
server side always needs to speak websockets, but only GOOS=js clients
speak it.
This doesn't yet totally remove the websocket dependency on Linux because
Linux has a envknob opt-in to act like GOOS=js for manual testing and force
the use of WebSockets for DERP only (not control). We can put that behind
a build tag in a future change to eliminate the dep on all GOOSes.
Updates #1278
Change-Id: I4f60508f4cad52bf8c8943c8851ecee506b7ebc9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Some environments would like to remove Tailscale SSH support for the
binary for various reasons when not needed (either for peace of mind,
or the ~1MB of binary space savings).
Updates tailscale/corp#24454
Updates #1278
Updates #12614
Change-Id: Iadd6c5a393992c254b5dc9aa9a526916f96fd07a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Adds a /disconnect-control local API endpoint that just shuts down control client.
This can be run before shutting down an HA subnet router/app connector replica - it will ensure
that all connection to control are dropped and control thus considers this node inactive and tells
peers to switch over to another replica. Meanwhile the existing connections keep working (assuming
that the replica is given some graceful shutdown period).
Updates tailscale/tailscale#14020
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Sets a custom hostinfo app type for ProxyGroup replicas, similarly
to how we do it for all other Kubernetes Operator managed components.
Updates tailscale/tailscale#13406,tailscale/corp#22920
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
- Basic description of DERP
If configured to do so, also show
- Mailto link to security@tailscale.com
- Link to Tailscale Security Policies
- Link to Tailscale Acceptable Use Policy
Updates tailscale/corp#24092
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This adds a new generic result type (motivated by golang/go#70084) to
try it out, and uses it in the new lineutil package (replacing the old
lineread package), changing that package to return iterators:
sometimes over []byte (when the input is all in memory), but sometimes
iterators over results of []byte, if errors might happen at runtime.
Updates #12912
Updates golang/go#70084
Change-Id: Iacdc1070e661b5fb163907b1e8b07ac7d51d3f83
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Thanks to @davidbuzz for raising the issue in #13973.
Fixes#8272Fixes#13973
Change-Id: Ic413e14d34c82df3c70a97e591b90316b0b4946b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Key changes:
- No mutex for every udp package: replace syncs.Map with regular map for udpTargetConns
- Use socksAddr as map key for better type safety
- Add test for multi udp target
Updates #7581
Change-Id: Ic3d384a9eab62dcbf267d7d6d268bf242cc8ed3c
Signed-off-by: VimT <me@vimt.me>
This commit addresses an issue with the SOCKS5 UDP relay functionality
when using the --tun=userspace-networking option. Previously, UDP packets
were not being correctly routed into the Tailscale network in this mode.
Key changes:
- Replace single UDP connection with a map of connections per target
- Use c.srv.dial for creating connections to ensure proper routing
Updates #7581
Change-Id: Iaaa66f9de6a3713218014cf3f498003a7cac9832
Signed-off-by: VimT <me@vimt.me>
A filesystem was plumbed into netstack in 993acf4475
but hasn't been used since 2d5d6f5403. Remove it.
Noticed while rebasing a Tailscale fork elsewhere.
Updates tailscale/corp#16827
Change-Id: Ib76deeda205ffe912b77a59b9d22853ebff42813
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We were only updating the ProfileManager and not going down
the EditPrefs path which meant the prefs weren't applied
till either the process restarted or some other pref changed.
This makes it so that we reconfigure everything correctly when
ReloadConfig is called.
Updates #13032
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Add an explicit case for exercising preferred DERP hysteresis around
the branch that compares latencies on a percentage basis.
Updates #cleanup
Signed-off-by: Jordan Whited <jordan@tailscale.com>
By counting "/" elements in the pattern we catch many scenarios, but not
the root-level handler. If either of the patterns is "/", compare the
pattern length to pick the right one.
Updates https://github.com/tailscale/corp/issues/8027
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
In this PR, we add the tailscale syspolicy command with two subcommands: list, which displays
policy settings, and reload, which forces a reload of those settings. We also update the LocalAPI
and LocalClient to facilitate these additions.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Make it possible to advertise app connector via a new conffile field.
Also bumps capver - conffile deserialization errors out if unknonw
fields are set, so we need to know which clients understand the new field.
Updates tailscale/tailscale#11113
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This required sharing the dropped packet metric between two packages
(tstun and magicsock), so I've moved its definition to util/usermetric.
Updates tailscale/corp#22075
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
The user-facing metrics are intended to track data transmitted at
the overlay network level.
Updates tailscale/corp#22075
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
In an environment with unstable latency, such as upstream bufferbloat,
there are cases where a full netcheck could drop the prior preferred
DERP (likely home DERP) from future netcheck probe plans. This will then
likely result in a home DERP having a missing sample on the next
incremental netcheck, ultimately resulting in a home DERP move.
This change does not fix our overall response to highly unstable
latency, but it is an incremental improvement to prevent single spurious
samples during a full netcheck from alone triggering a flapping
condition, as now the prior changes to include historical latency will
still provide the desired resistance, and the home DERP should not move
unless latency is consistently worse over a 5 minute period.
Note that there is a nomenclature and semantics issue remaining in the
difference between a report preferred DERP and a home DERP. A report
preferred DERP is aspirational, it is what will be picked as a home DERP
if a home DERP connection needs to be established. A nodes home DERP may
be different than a recent preferred DERP, in which case a lot of
netcheck logic is fallible. In future enhancements much of the DERP move
logic should move to consider the home DERP, rather than recent report
preferred DERP.
Updates #8603
Updates #13969
Signed-off-by: James Tucker <james@tailscale.com>
We make setting.Snapshot JSON-marshallable in preparation for returning it from the LocalAPI.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
