We update client/tailscale.LocalClient to allow specifying an optional Transport
(http.RoundTripper) for LocalAPI HTTP requests, and implement one that injects
an ipnauth.TestActor via request headers. We also add several functions and types
to make testing an ipn/ipnserver.Server possible (or at least easier).
We then use these updates to write basic tests for ipnserver.Server,
ensuring it works on non-Windows platforms and correctly sets and unsets
the LocalBackend's current user when a Windows user connects and disconnects.
We intentionally omit tests for switching between different OS users
and will add them in follow-up commits.
Updates tailscale/corp#25804
Signed-off-by: Nick Khyl <nickk@tailscale.com>
In preparation for adding test coverage for ipn/ipnserver.Server, we update it
to use ipnauth.Actor instead of its concrete implementation where possible.
Updates tailscale/corp#25804
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We build up maps of both the existing MagicDNS configuration in hosts
and the desired MagicDNS configuration, compare the two, and only
write out a new one if there are changes. The comparison doesn't need
to be perfect, as the occasional false-positive is fine, but this
should greatly reduce rewrites of the hosts file.
I also changed the hosts updating code to remove the CRLF/LF conversion
stuff, and use Fprintf instead of Frintln to let us write those inline.
Updates #14428
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This deprecates the old "DERP string" packing a DERP region ID into an
IP:port of 127.3.3.40:$REGION_ID and just uses an integer, like
PeerChange.DERPRegion does.
We still support servers sending the old form; they're converted to
the new form internally right when they're read off the network.
Updates #14636
Change-Id: I9427ec071f02a2c6d75ccb0fcbf0ecff9f19f26f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This doesn't seem to have any immediate impact, but not allowing access via the IPv6 masquerade
address when an IPv4 masquerade address is also set seems like a bug.
Updates #cleanup
Updates #14570 (found when working on it)
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This finishes the work started in #14616.
Updates #8632
Change-Id: I4dc07d45b1e00c3db32217c03b21b8b1ec19e782
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In this PR, we add a generic views.ValuePointer type that can be used as a view for pointers
to basic types and struct types that do not require deep cloning and do not have corresponding
view types. Its Get/GetOk methods return stack-allocated shallow copies of the underlying value.
We then update the cmd/viewer codegen to produce getters that return either concrete views
when available or ValuePointer views when not, for pointer fields in generated view types.
This allows us to avoid unnecessary allocations compared to returning pointers to newly
allocated shallow copies.
Updates #14570
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This amends commit b7e48058c8d243adf1ff687e3e92d3fb02b035ea.
That commit broke all documented ways of starting Tailscale on gokrazy:
https://gokrazy.org/packages/tailscale/ — both Option A (tailscale up)
and Option B (tailscale up --auth-key) rely on the tailscale CLI working.
I verified that the tailscale CLI just prints it help when started
without arguments, i.e. it does not stay running and is not restarted.
I verified that the tailscale CLI successfully exits when started with
tailscale up --auth-key, regardless of whether the node has joined
the tailnet yet or not.
I verified that the tailscale CLI successfully waits and exits when
started with tailscale up, as expected.
fixes https://github.com/gokrazy/gokrazy/issues/286
Signed-off-by: Michael Stapelberg <michael@stapelberg.de>
This will enable Prometheus queries to look at the bandwidth over time windows,
for example 'increase(derp_bw_bytes_total)[1h] / increase(derp_bw_transfer_time_seconds_total)[1h]'.
Fixes commit a51672cafd8b6c4e87915a55bda1491eb7cbee84.
Updates tailscale/corp#25503
Signed-off-by: Percy Wegmann <percy@tailscale.com>
We still use josharian/native (hi @josharian!) via
netlink, but I also sent https://github.com/mdlayher/netlink/pull/220
Updates #8632
Change-Id: I2eedcb7facb36ec894aee7f152c8a1f56d7fc8ba
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
sync.OnceValue and slices.Compact were both added in Go 1.21.
cmp.Or was added in Go 1.22.
Updates #8632
Updates #11058
Change-Id: I89ba4c404f40188e1f8a9566c8aaa049be377754
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Bump the versions to pick up some CVE patches. They don't affect us, but
customer scanners will complain.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This commit updates the return body of c2n endpoint /vip-services to keep hash generation logic on client side.
Updates tailscale/corp#24510
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
Most of these are effectively no-ops, but appease security scanners.
At least one (x/net for x/net/html) only affect builds from the open source repo,
since we already had it updated in our "corp" repo:
golang.org/x/net v0.33.1-0.20241230221519-e9d95ba163f7
... and that's where we do the official releases from. e.g.
tailscale.io % go install tailscale.com/cmd/tailscaled
tailscale.io % go version -m ~/go/bin/tailscaled | grep x/net
dep golang.org/x/net v0.33.1-0.20241230221519-e9d95ba163f7 h1:raAbYgZplPuXQ6s7jPklBFBmmLh6LjnFaJdp3xR2ljY=
tailscale.io % cd ../tailscale.com
tailscale.com % go install tailscale.com/cmd/tailscaled
tailscale.com % go version -m ~/go/bin/tailscaled | grep x/net
dep golang.org/x/net v0.33.0 h1:74SYHlV8BIgHIFC/LrYkOGIwL19eTYXQ5wc6TBuO36I=
Updates #8043
Updates #14599
Change-Id: I6e238cef62ca22444145a5313554aab8709b33c9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
cmd/containerboot: load containerboot serve config that does not contain HTTPS endpoint in tailnets with HTTPS disabled
Fixes an issue where, if a tailnet has HTTPS disabled, no serve config
set via TS_SERVE_CONFIG was loaded, even if it does not contain an HTTPS endpoint.
Now for tailnets with HTTPS disabled serve config provided to containerboot is considered invalid
(and therefore not loaded) only if there is an HTTPS endpoint defined in the config.
Fixestailscale/tailscale#14495
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/{k8s-operator,containerboot}: reload tailscaled configfile when its contents have changed
Instead of restarting the Kubernetes Operator proxies each time
tailscaled config has changed, this dynamically reloads the configfile
using the new reload endpoint.
Older annotation based mechanism will be supported till 1.84
to ensure that proxy versions prior to 1.80 keep working with
operator 1.80 and newer.
Updates tailscale/tailscale#13032
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
If the total number of differences is less than a small amount, just do
the dumb quadratic thing and compare every single object instead of
allocating a map.
Updates tailscale/corp#25479
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8931b4355a2da4ec0f19739927311cf88711a840
Extracted from some code written in the other repo.
Updates tailscale/corp#25479
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I6df062fdffa1705524caa44ac3b6f2788cf64595
This will enable Prometheus queries to look at the bandwidth over time windows,
for example 'increase(derp_bw_bytes_total)[1h] / increase(derp_bw_transfer_time_seconds_total)[1h]'.
Updates tailscale/corp#25503
Signed-off-by: Percy Wegmann <percy@tailscale.com>
* cmd/k8s-operator,k8s-operator: allow users to set custom labels for the optional ServiceMonitor
Updates tailscale/tailscale#14381
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
govulncheck flagged a couple fresh vulns in that package:
* https://pkg.go.dev/vuln/GO-2025-3367
* https://pkg.go.dev/vuln/GO-2025-3368
I don't believe these affect us, as we only do any git stuff from
release tooling which is all internal and with hardcoded repo URLs.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Change the type of the `IPv4` and `IPv6` members in the `nodeData`
struct to be `netip.Addr` instead of `string`.
We were previously calling `String()` on this struct, which returns
"invalid IP" when the `netip.Addr` is its zero value, and passing this
value into the aforementioned attributes.
This caused rendering issues on the frontend
as we were assuming that the value for `IPv4` and `IPv6` would be falsy
in this case.
The zero value for a `netip.Addr` marshalls to an empty string instead
which is the behaviour we want downstream.
Updates https://github.com/tailscale/tailscale/issues/14568
Signed-off-by: Mario Minardi <mario@tailscale.com>
Extracted from some code written in the other repo.
Updates tailscale/corp#25479
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I92c97a63a8f35cace6e89a730938ea587dcefd9b
Currently this does not yet do anything apart from creating
the ProxyGroup resources like StatefulSet.
Updates tailscale/corp#24795
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This commit updates the VIPService c2n endpoint on client to response with actual VIPService configuration stored
in the serve config.
Fixestailscale/corp#24510
Signed-off-by: KevinLiang10 <37811973+KevinLiang10@users.noreply.github.com>
These erroneously blocked a recent PR, which I fixed by simply
re-running CI. But we might as well fix them anyway.
These are mostly `printf` to `print` and a couple of `!=` to `!Equal()`
Updates #cleanup
Signed-off-by: Will Norris <will@tailscale.com>
Remove the platform specificity, it is unnecessary complexity.
Deduplicate repeated code as a result of reduced complexity.
Split out error identification code.
Update call-sites and tests.
Updates #14551
Updates tailscale/corp#25648
Signed-off-by: James Tucker <james@tailscale.com>
Fixestailscale/tailscale#14563
When creating a NoiseClient, ensure that if any private IP address is provided, with both an `http` scheme and an explicit port number, we do not ever attempt to use HTTPS. We were only handling the case of `127.0.0.1` and `localhost`, but `192.168.x.y` is a private IP as well. This uses the `netip` package to check and adds some logging in case we ever need to troubleshoot this.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Observed in the wild some macOS machines gain broken sockets coming out
of sleep (we observe "time jumped", followed by EPIPE on sendto). The
cause of this in the platform is unclear, but the fix is clear: always
rebind if the socket is broken. This can also be created artificially on
Linux via `ss -K`, and other conditions or software on a system could
also lead to the same outcomes.
Updates tailscale/corp#25648
Signed-off-by: James Tucker <james@tailscale.com>
In the process, because I needed it for testing, make all
LocalBackend-managed goroutines be accounted for. And then in tests,
verify they're no longer running during LocalBackend.Shutdown.
Updates tailscale/corp#19681
Change-Id: Iad873d4df7d30103a4a7863dfacf9e078c77e6a3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Updates #14520
Updates #14517 (in that I pulled this out of there)
Change-Id: Ibc28162816e083fcadf550586c06805c76e378fc
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was failing about an unaccepted risk ("mac-app-connector") because
it was checking runtime.GOOS ("darwin") instead of the test's env.goos
string value ("linux", which doesn't have the warning).
Fixes#14544
Change-Id: I470d86a6ad4bb18e1dd99d334538e56556147835
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
