After some analysis, stateful filtering is only necessary in tailnets
that use `autogroup:danger-all` in `src` in ACLs. And in those cases
users explicitly specify that hosts outside of the tailnet should be
able to reach their nodes. To fix local DNS breakage in containers, we
disable stateful filtering by default.
Updates #12108
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
It was requested by the first customer 4-5 years ago and only used
for a brief moment of time. We later added netmap visibility trimming
which removes the need for this.
It's been hidden by the CLI for quite some time and never documented
anywhere else.
This keeps the CLI flag, though, out of caution. It just returns an
error if it's set to anything but true (its default).
Fixes#12058
Change-Id: I7514ba572e7b82519b04ed603ff9f3bdbaecfda7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Palo Alto firewalls have a typically hard NAT, but also have a mode
called Persistent DIPP that is supposed to provide consistent port
mapping suitable for STUN resolution of public ports. Persistent DIPP
works initially on most Palo Alto firewalls, but some models/software
versions have a bug which this works around.
The bug symptom presents as follows:
- STUN sessions resolve a consistent public IP:port to start with
- Much later netchecks report the same IP:Port for a subset of
sessions, most often the users active DERP, and/or the port related
to sustained traffic.
- The broader set of DERPs in a full netcheck will now consistently
observe a new IP:Port.
- After this point of observation, new inbound connections will only
succeed to the new IP:Port observed, and existing/old sessions will
only work to the old binding.
In this patch we now advertise the lowest latency global endpoint
discovered as we always have, but in addition any global endpoints that
are observed more than once in a single netcheck report. This should
provide viable endpoints for potential connection establishment across
a NAT with this behavior.
Updates tailscale/corp#19106
Signed-off-by: James Tucker <james@tailscale.com>
Fixestailscale/tailscale#10393Fixestailscale/corp#15412Fixestailscale/corp#19808
On Apple platforms, exit nodes and subnet routers have been unable to relay pings from Tailscale devices to non-Tailscale devices due to sandbox restrictions imposed on our network extensions by Apple. The sandbox prevented the code in netstack.go from spawning the `ping` process which we were using.
Replace that exec call with logic to send an ICMP echo request directly, which appears to work in userspace, and not trigger a sandbox violation in the syslog.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
When Docker is detected on the host and stateful filtering is enabled,
Docker containers may be unable to reach Tailscale nodes (depending on
the network settings of a container). Detect Docker when stateful
filtering is enabled and print a health warning to aid users in noticing
this issue.
We avoid printing the warning if the current node isn't advertising any
subnet routes and isn't an exit node, since without one of those being
true, the node wouldn't have the correct AllowedIPs in WireGuard to
allow a Docker container to connect to another Tailscale node anyway.
Updates #12070
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Idef538695f4d101b0ef6f3fb398c0eaafc3ae281
Previously, a node that was advertising a 4via6 route wouldn't be able
to make use of that same route; the packet would be delivered to
Tailscale, but since we weren't accepting it in handleLocalPackets, the
packet wouldn't be delivered to netstack and would never hit the 4via6
logic. Let's add that support so that usage of 4via6 is consistent
regardless of where the connection is initiated from.
Updates #11304
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ic28dc2e58080d76100d73b93360f4698605af7cb
This adds a new bool that can be sent down from control
to do jailing on the client side. Previously this would
only be done from control by modifying the packet filter
we sent down to clients. This would result in a lot of
additional work/CPU on control, we could instead just
do this on the client. This has always been a TODO which
we keep putting off, might as well do it now.
Updates tailscale/corp#19623
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This plumbs a packet filter for jailed nodes through to the
tstun.Wrapper; the filter for a jailed node is equivalent to a "shields
up" filter. Currently a no-op as there is no way for control to
tell the client whether a peer is jailed.
Updates tailscale/corp#19623
Co-authored-by: Andrew Dunham <andrew@du.nham.ca>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Change-Id: I5ccc5f00e197fde15dd567485b2a99d8254391ad
In prep for it being required in more places.
Updates #11874
Change-Id: Ib743205fc2a6c6ff3d2c4ed3a2b28cac79156539
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In prep for most of the package funcs in net/interfaces to become
methods in a long-lived netmon.Monitor that can cache things. (Many
of the funcs are very heavy to call regularly, whereas the long-lived
netmon.Monitor can subscribe to things from the OS and remember
answers to questions it's asked regularly later)
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: Ie4e8dedb70136af2d611b990b865a822cd1797e5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The goal is to move more network state accessors to netmon.Monitor
where they can be cheaper/cached. But first (this change and others)
we need to make sure the one netmon.Monitor is plumbed everywhere.
Some notable bits:
* tsdial.NewDialer is added, taking a now-required netmon
* because a tsdial.Dialer always has a netmon, anything taking both
a Dialer and a NetMon is now redundant; take only the Dialer and
get the NetMon from that if/when needed.
* netmon.NewStatic is added, primarily for tests
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This has been a TODO for ages. Time to do it.
The goal is to move more network state accessors to netmon.Monitor
where they can be cheaper/cached.
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I60fc6508cd2d8d079260bda371fc08b6318bcaf1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a health.Tracker to tsd.System, accessible via
a new tsd.System.HealthTracker method.
In the future, that new method will return a tsd.System-specific
HealthTracker, so multiple tsnet.Servers in the same process are
isolated. For now, though, it just always returns the temporary
health.Global value. That permits incremental plumbing over a number
of changes. When the second to last health.Global reference is gone,
then the tsd.System.HealthTracker implementation can return a private
Tracker.
The primary plumbing this does is adding it to LocalBackend and its
dozen and change health calls. A few misc other callers are also
plumbed. Subsequent changes will flesh out other parts of the tree
(magicsock, controlclient, etc).
Updates #11874
Updates #4136
Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously it was both metadata about the class of warnable item as
well as the value.
Now it's only metadata and the value is per-Tracker.
Updates #11874
Updates #4136
Change-Id: Ia1ed1b6c95d34bc5aae36cffdb04279e6ba77015
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This moves most of the health package global variables to a new
`health.Tracker` type.
But then rather than plumbing the Tracker in tsd.System everywhere,
this only goes halfway and makes one new global Tracker
(`health.Global`) that all the existing callers now use.
A future change will eliminate that global.
Updates #11874
Updates #4136
Change-Id: I6ee27e0b2e35f68cb38fecdb3b2dc4c3f2e09d68
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This helps reduce memory pressure on tailnets with large numbers
of routes.
Updates tailscale/corp#19332
Signed-off-by: Percy Wegmann <percy@tailscale.com>
* cmd/containerboot,util/linuxfw: support proxy backends specified by DNS name
Adds support for optionally configuring containerboot to proxy
traffic to backends configured by passing TS_EXPERIMENTAL_DEST_DNS_NAME env var
to containerboot.
Containerboot will periodically (every 10 minutes) attempt to resolve
the DNS name and ensure that all traffic sent to the node's
tailnet IP gets forwarded to the resolved backend IP addresses.
Currently:
- if the firewall mode is iptables, traffic will be load balanced
accross the backend IP addresses using round robin. There are
no health checks for whether the IPs are reachable.
- if the firewall mode is nftables traffic will only be forwarded
to the first IP address in the list. This is to be improved.
* cmd/k8s-operator: support ExternalName Services
Adds support for exposing endpoints, accessible from within
a cluster to the tailnet via DNS names using ExternalName Services.
This can be done by annotating the ExternalName Service with
tailscale.com/expose: "true" annotation.
The operator will deploy a proxy configured to route tailnet
traffic to the backend IPs that service.spec.externalName
resolves to. The backend IPs must be reachable from the operator's
namespace.
Updates tailscale/tailscale#10606
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The Network Location Awareness service identifies networks authenticated against
an Active Directory domain and categorizes them as "Domain Authenticated".
This includes the Tailscale network if a Domain Controller is reachable through it.
If a network is categories as NLM_NETWORK_CATEGORY_DOMAIN_AUTHENTICATED,
it is not possible to override its category, and we shouldn't attempt to do so.
Additionally, our Windows Firewall rules should be compatible with both private
and domain networks.
This fixes both issues.
Fixes#11813
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Most of the magicsock tests fake the network, simulating packets going
out and coming in. There's no reason to actually hit your router to do
UPnP/NAT-PMP/PCP during in tests. But while debugging thousands of
iterations of tests to deflake some things, I saw it slamming my
router. This stops that.
Updates #11762
Change-Id: I59b9f48f8f5aff1fa16b4935753d786342e87744
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Seems to deflake tstest/integration tests. I can't reproduce it
anymore on one of my VMs that was consistently flaking after a dozen
runs before. Now I can run hundreds of times.
Updates #11649Fixes#7036
Change-Id: I2f7d4ae97500d507bdd78af9e92cd1242e8e44b8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I'm on a mission to simplify LocalBackend.Start and its locking
and deflake some tests.
I noticed this hasn't been used since March 2023 when it was removed
from the Windows client in corp 66be796d33c.
So, delete.
Updates #11649
Change-Id: I40f2cb75fb3f43baf23558007655f65a8ec5e1b2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We have seen in macOS client logs that the "operation not permitted", a
syscall.EPERM error, is being returned when traffic is attempted to be
sent. This may be caused by security software on the client.
This change will perform a rebind and restun if we receive a
syscall.EPERM error on clients running darwin. Rebinds will only be
called if we haven't performed one specifically for an EPERM error in
the past 5 seconds.
Updates #11710
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Trying to run iptables/nftables on Synology pauses for minutes with
lots of errors and ultimately does nothing as it's not used and we
lack permissions.
This fixes a regression from db760d0bac (#11601) that landed
between Synology testing on unstable 1.63.110 and 1.64.0 being cut.
Fixes#11737
Change-Id: Iaf9563363b8e45319a9b6fe94c8d5ffaecc9ccef
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Just because we don't have known endpoints for a peer does not mean that
the peer should become unreachable. If we know the peers key, it should
be able to call us, then we can talk back via whatever path it called us
on. First step - don't drop the packet in this context.
Updates tailscale/corp#19106
Signed-off-by: James Tucker <james@tailscale.com>
This removes a potentially increased boot delay for certain boot
topologies where they block on ExecStartPre that may have socket
activation dependencies on other system services (such as
systemd-resolved and NetworkManager).
Also rename cleanup to clean up in affected/immediately nearby places
per code review commentary.
Fixes#11599
Signed-off-by: James Tucker <james@tailscale.com>
It was used when we only supported subnet routers on linux
and would nil out the SubnetRoutes slice as no other router
worked with it, but now we support subnet routers on ~all platforms.
The field it was setting to nil is now only used for network logging
and nowhere else, so keep the field but drop the SubnetRouterWrapper
as it's not useful.
Updates #cleanup
Change-Id: Id03f9b6ec33e47ad643e7b66e07911945f25db79
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The netcheck package and the magicksock package coordinate via the
health package, but both sides have time based heuristics through
indirect dependencies. These were misaligned, so the implemented
heuristic aimed at reducing DERP moves while there is active traffic
were non-operational about 3/5ths of the time.
It is problematic to setup a good test for this integration presently,
so instead I added comment breadcrumbs along with the initial fix.
Updates #8603
Signed-off-by: James Tucker <james@tailscale.com>
Only on Gokrazy, set sysctls to enable IP forwarding so subnet routing
and advertised exit node works.
Fixes#11405
Signed-off-by: Joonas Kuorilehto <joneskoo@derbian.fi>
This allows clients to avoid establishing their VPN multiple times when
both routes and DNS are changing in rapid succession.
Updates tailscale/corp#18928
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This change updates all tailfs functions and the majority of the tailfs
variables to use the new drive naming.
Updates tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This change updates the tailfs file and package names to their new
naming convention.
Updates #tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
We have hosts that support IPv6, but not IPv6 firewall configuration
in iptables mode.
We also have hosts that have some support for IPv6 firewall
configuration in iptables mode, but do not have iptables filter table.
We should:
- configure ip rules for all hosts that support IPv6
- only configure firewall rules in iptables mode if the host
has iptables filter table.
Updates tailscale/tailscale#11540
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Use the zstdframe package where sensible instead of plumbing
around our own zstd.Encoder just for stateless operations.
This causes logtail to have a dependency on zstd,
but that's arguably okay since zstd support is implicit
to the protocol between a client and the logging service.
Also, virtually every caller to logger.NewLogger was
manually setting up a zstd.Encoder anyways,
meaning that zstd was functionally always a dependency.
Updates #cleanup
Updates tailscale/corp#18514
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This fixes a bug that was introduced in #11258 where the handling of the
per-client limit didn't properly account for the fact that the gVisor
TCP forwarder will return 'true' to indicate that it's handled a
duplicate SYN packet, but not launch the handler goroutine.
In such a case, we neither decremented our per-client limit in the
wrapper function, nor did we do so in the handler function, leading to
our per-client limit table slowly filling up without bound.
Fix this by doing the same duplicate-tracking logic that the TCP
forwarder does so we can detect such cases and appropriately decrement
our in-flight counter.
Updates tailscale/corp#12184
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ib6011a71d382a10d68c0802593f34b8153d06892
This pretty much always results in an outage because peers won't
discover our new home region and thus won't be able to establish
connectivity.
Updates tailscale/corp#18095
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ic0d09133f198b528dd40c6383b16d7663d9d37a7
