This busybox fwmaskWorks check was added before we moved away from
using the "ip" command to using netlink directly.
So it's now just wasted work (and log spam on Gokrazy) to check the
"ip" command capabilities if we're never going to use it.
Do it lazily instead.
Updates #12277
Change-Id: I8ab9acf64f9c0d8240ce068cb9ec8c0f6b1ecee7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Updates https://github.com/tailscale/corp/issues/15802.
On iOS exclusively, this PR adds logic to use a split DNS configuration in more cases, with the goal of improving battery life. Acting as the global DNS resolver on iOS should be avoided, as it leads to frequent wakes of IPNExtension.
We try to determine if we can have Tailscale only handle DNS queries for resources inside the tailnet, that is, all routes in the DNS configuration do not require a custom resolver (this is the case for app connectors, for instance).
If so, we set all Routes as MatchDomains. This enables a split DNS configuration which will help preserve battery life. Effectively, for the average Tailscale user who only relies on MagicDNS to resolve *.ts.net domains, this means that Tailscale DNS will only be used for those domains.
This PR doesn't affect users with Override Local DNS enabled. For these users, there should be no difference and Tailscale will continue acting as a global DNS resolver.
Signed-off-by: Andrea Gottardo <andrea@tailscale.com>
This allows pam authentication to run for ssh sessions, triggering
automation like pam_mkhomedir.
Updates #11854
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This can be used to implement a persistent pool (i.e. one that isn't
cleared like sync.Pool is) of items–e.g. database connections.
Some benchmarks vs. a naive implementation that uses a single map
iteration show a pretty meaningful improvement:
$ benchstat -col /impl ./bench.txt
goos: darwin
goarch: arm64
pkg: tailscale.com/util/pool
│ Pool │ map │
│ sec/op │ sec/op vs base │
Pool_AddDelete-10 10.56n ± 2% 15.11n ± 1% +42.97% (p=0.000 n=10)
Pool_TakeRandom-10 56.75n ± 4% 1899.50n ± 20% +3246.84% (p=0.000 n=10)
geomean 24.49n 169.4n +591.74%
Updates tailscale/corp#19900
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ie509cb65573c4726cfc3da9a97093e61c216ca18
We don't build a lot of tools with CGO, but we do build some, and it's
extremely valuable for production services in particular to have symbols
included - for perf and so on.
I tested various other builds that could be affected negatively, in
particular macOS/iOS, but those use split-dwarf already as part of their
build path, and Android which does not currently use gocross.
One binary which is normally 120mb only grew to 123mb, so the trade-off
is definitely worthwhile in context.
Updates tailscale/corp#20296
Signed-off-by: James Tucker <james@tailscale.com>
Palo Alto reported interpreting hairpin probes as LAND attacks, and the
firewalls may be responding to this by shutting down otherwise in use NAT sessions
prematurely. We don't currently make use of the outcome of the hairpin
probes, and they contribute to other user confusion with e.g. the
AirPort Extreme hairpin session workaround. We decided in response to
remove the whole probe feature as a result.
Updates #188
Updates tailscale/corp#19106
Updates tailscale/corp#19116
Signed-off-by: James Tucker <james@tailscale.com>
After some analysis, stateful filtering is only necessary in tailnets
that use `autogroup:danger-all` in `src` in ACLs. And in those cases
users explicitly specify that hosts outside of the tailnet should be
able to reach their nodes. To fix local DNS breakage in containers, we
disable stateful filtering by default.
Updates #12108
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This change updates the existing api.md TOC links to point at the new
publicapi folder/files. It also removes the body of the docs from the
file, to avoid the docs becoming out of sync.
This change also renames overview.md to readme.md.
Updates tailscale/corp#19526
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
It was requested by the first customer 4-5 years ago and only used
for a brief moment of time. We later added netmap visibility trimming
which removes the need for this.
It's been hidden by the CLI for quite some time and never documented
anywhere else.
This keeps the CLI flag, though, out of caution. It just returns an
error if it's set to anything but true (its default).
Fixes#12058
Change-Id: I7514ba572e7b82519b04ed603ff9f3bdbaecfda7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Updates #12172 (then need to update other repos)
Change-Id: I439f65e0119b09e00da2ef5c7a4f002f93558578
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This change includes the device and user invites API docs in the
new publicapi documentation structure.
Updates tailscale/corp#19526
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Palo Alto firewalls have a typically hard NAT, but also have a mode
called Persistent DIPP that is supposed to provide consistent port
mapping suitable for STUN resolution of public ports. Persistent DIPP
works initially on most Palo Alto firewalls, but some models/software
versions have a bug which this works around.
The bug symptom presents as follows:
- STUN sessions resolve a consistent public IP:port to start with
- Much later netchecks report the same IP:Port for a subset of
sessions, most often the users active DERP, and/or the port related
to sustained traffic.
- The broader set of DERPs in a full netcheck will now consistently
observe a new IP:Port.
- After this point of observation, new inbound connections will only
succeed to the new IP:Port observed, and existing/old sessions will
only work to the old binding.
In this patch we now advertise the lowest latency global endpoint
discovered as we always have, but in addition any global endpoints that
are observed more than once in a single netcheck report. This should
provide viable endpoints for potential connection establishment across
a NAT with this behavior.
Updates tailscale/corp#19106
Signed-off-by: James Tucker <james@tailscale.com>
This change creates a new folder called publicapi that will become the
future home to the Tailscale public API docs.
This change also splits the existing API docs (still located in api.md)
into separate files, for easier reading and contribution.
Updates tailscale/corp#19526
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Fixestailscale/tailscale#10393Fixestailscale/corp#15412Fixestailscale/corp#19808
On Apple platforms, exit nodes and subnet routers have been unable to relay pings from Tailscale devices to non-Tailscale devices due to sandbox restrictions imposed on our network extensions by Apple. The sandbox prevented the code in netstack.go from spawning the `ping` process which we were using.
Replace that exec call with logic to send an ICMP echo request directly, which appears to work in userspace, and not trigger a sandbox violation in the syslog.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Tracking down the side effect can otherwise be a pain, for example on
Darwin an empty GOOS resulted in CGO being implicitly disabled. The user
intended for `export GOOS=` to act like unset, and while this is a
misunderstanding, the main toolchain would treat it this way.
Fixestailscale/corp#20059
Signed-off-by: James Tucker <james@tailscale.com>
This reverts commit e3dec086e6.
Going to reuse Meta instead as that is already exported.
Updates tailscale/corp#1297
Signed-off-by: Maisem Ali <maisem@tailscale.com>
In this commit I updated the Ipv6 range we use to generate Control D DOH ip, we were using the NextDNSRanges to generate Control D DOH ip, updated to use the correct range.
Updates: #7946
Signed-off-by: Kevin Liang <kevinliang@tailscale.com>
In a configuration where the local node (ip1) has a different IP (ip2)
that it uses to communicate with a peer (ip3) we would do UDP flow
tracking on the `ip2->ip3` tuple. When we receive the response from
the peer `ip3->ip2` we would dnat it back to `ip3->ip1` which would
then not match the flow track state and the packet would get dropped.
To fix this, we should do flow tracking on the `ip1->ip3` tuple instead
of `ip2->ip3` which requires doing SNAT after the running filterPacketOutboundToWireGuard.
Updates tailscale/corp#19971, tailscale/corp#8020
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Fixestailscale/corp#19979
A build with version number 275 was uploaded to the App Store without bumping OSS first. The presence of that build is causing any 274.* build to be rejected. To address this, added -1 to the year component, which means new builds will use the 275.* prefix.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Without changing behaviour, don't create a goroutine per connection that
sits and sleeps, but rather use a timer that wakes up and gathers
statistics on a regular basis.
Fixes#12127
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ibc486447e403070bdc3c2cd8ae340e7d02854f21
* util/linuxfw: fix IPv6 NAT availability check for nftables
When running firewall in nftables mode,
there is no need for a separate NAT availability check
(unlike with iptables, there are no hosts that support nftables, but not IPv6 NAT - see tailscale/tailscale#11353).
This change fixes a firewall NAT availability check that was using the no-longer set ipv6NATAvailable field
by removing the field and using a method that, for nftables, just checks that IPv6 is available.
Updates tailscale/tailscale#12008
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The previous LocalBackend & CLI 'up' changes improved some stuff, but
might've been too aggressive in some edge cases.
This simplifies the authURL vs authURLSticky distinction and removes
the interact field, which seemed to just just be about duplicate URL
suppression in IPN bus, back from when the IPN bus was a single client
at a time. This moves that suppression to a different spot.
Fixes#12119
Updates #12028
Updates #12042
Change-Id: I1f8800b1e82ccc1c8a0d7abba559e7404ddf41e4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This was a typo in 2e19790f61.
It should have been on `Map` and not on `*Map` as otherwise
it doesn't allow for chaining like `someView.SomeMap().AsMap()`
and requires first assigning it to a variable.
Updates #typo
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This adds a new `UserLogf` field to the `Server` struct.
When set this any logs generated by Server are logged using
`UserLogf` and all spammy backend logs are logged to `Logf`.
If it `UserLogf` is unset, we default to `log.Printf` and
if `Logf` is unset we discard all the spammy logs.
Fixes#12094
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Clients often perform a PROPFIND for the parent directory before
performing PROPFIND for specific children within that directory.
The PROPFIND for the parent directory is usually done at depth 1,
meaning that we already have information for all of the children.
By immediately adding that to the cache, we save a roundtrip to
the remote peer on the PROPFIND for the specific child.
Updates tailscale/corp#19779
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Turn off stateful filtering for egress proxies to allow cluster
traffic to be forwarded to tailnet.
Allow configuring stateful filter via tailscaled config file.
Deprecate EXPERIMENTAL_TS_CONFIGFILE_PATH env var and introduce a new
TS_EXPERIMENTAL_VERSIONED_CONFIG env var that can be used to provide
containerboot a directory that should contain one or more
tailscaled config files named cap-<tailscaled-cap-version>.hujson.
Containerboot will pick the one with the newest capability version
that is not newer than its current capability version.
Proxies with this change will not work with older Tailscale
Kubernetes operator versions - users must ensure that
the deployed operator is at the same version or newer (up to
4 version skew) than the proxies.
Updates tailscale/tailscale#12061
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Maisem Ali <maisem@tailscale.com>
When Docker is detected on the host and stateful filtering is enabled,
Docker containers may be unable to reach Tailscale nodes (depending on
the network settings of a container). Detect Docker when stateful
filtering is enabled and print a health warning to aid users in noticing
this issue.
We avoid printing the warning if the current node isn't advertising any
subnet routes and isn't an exit node, since without one of those being
true, the node wouldn't have the correct AllowedIPs in WireGuard to
allow a Docker container to connect to another Tailscale node anyway.
Updates #12070
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Idef538695f4d101b0ef6f3fb398c0eaafc3ae281
