* cmd/containerboot: store device ID before setting up proxy routes.
For containerboot instances whose state needs to be stored
in a Kubernetes Secret, we additonally store the device's
ID, FQDN and IPs.
This is used, between other, by the Kubernetes operator,
who uses the ID to delete the device when resources need
cleaning up and writes the FQDN and IPs on various kube
resource statuses for visibility.
This change shifts storing device ID earlier in the proxy setup flow,
to ensure that if proxy routing setup fails,
the device can still be deleted.
Updates tailscale/tailscale#12146
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* code review feedback
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
---------
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
We do not support specific version updates or track switching on macOS.
Do not populate the flag to avoid confusion.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Previously, we would only compare the current version to resolved latest
version for track. When running `tailscale update --track=stable` from
an unstable build, it would almost always fail because the stable
version is "older". But we should support explicitly switching tracks
like that.
Fixes#12347
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
For pprof cosmetic/confusion reasons more than performance, but it
might have tiny speed benefit.
Updates #12486
Change-Id: I40e03714f3afa3a7e7f5e1fa99b81c7e889b91b6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So profiles show more useful names than just func1, func2, func3, etc.
There will still be func1 on them all, but the symbol before will say
what the lookup type is.
Updates #12486
Change-Id: I910b024a7861394eb83d07f5a899eae338cb1f22
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This moves NewContainsIPFunc from tsaddr to new ipset package.
And wgengine/filter types gets split into wgengine/filter/filtertype,
so netmap (and thus the CLI, etc) doesn't need to bring in ipset,
bart, etc.
Then add a test making sure the CLI deps don't regress.
Updates #1278
Change-Id: Ia246d6d9502bbefbdeacc4aef1bed9c8b24f54d5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I noticed the not-local-v6 numbers were nowhere near the v4 numbers
(they should be identical) and then saw this. It meant the
Addr().Next() wasn't picking an IP that was no longer local, as
assumed.
Updates #12486
Change-Id: I18dfb641f00c74c6252666bc41bd2248df15fadd
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
NewContainsIPFunc was previously documented as performing poorly if
there were many netip.Prefixes to search over. As such, we never it used it
in such cases.
This updates it to use bart at a certain threshold (over 6 prefixes,
currently), at which point the bart lookup overhead pays off.
This is currently kinda useless because we're not using it. But now we
can and get wins elsewhere. And we can remove the caveat in the docs.
goos: darwin
goarch: arm64
pkg: tailscale.com/net/tsaddr
│ before │ after │
│ sec/op │ sec/op vs base │
NewContainsIPFunc/empty-8 2.215n ± 11% 2.239n ± 1% +1.08% (p=0.022 n=10)
NewContainsIPFunc/cidr-list-1-8 17.44n ± 0% 17.59n ± 6% +0.89% (p=0.000 n=10)
NewContainsIPFunc/cidr-list-2-8 27.85n ± 0% 28.13n ± 1% +1.01% (p=0.000 n=10)
NewContainsIPFunc/cidr-list-3-8 36.05n ± 0% 36.56n ± 13% +1.41% (p=0.000 n=10)
NewContainsIPFunc/cidr-list-4-8 43.73n ± 0% 44.38n ± 1% +1.50% (p=0.000 n=10)
NewContainsIPFunc/cidr-list-5-8 51.61n ± 2% 51.75n ± 0% ~ (p=0.101 n=10)
NewContainsIPFunc/cidr-list-10-8 95.65n ± 0% 68.92n ± 0% -27.94% (p=0.000 n=10)
NewContainsIPFunc/one-ip-8 4.466n ± 0% 4.469n ± 1% ~ (p=0.491 n=10)
NewContainsIPFunc/two-ip-8 8.002n ± 1% 7.997n ± 4% ~ (p=0.697 n=10)
NewContainsIPFunc/three-ip-8 27.98n ± 1% 27.75n ± 0% -0.82% (p=0.012 n=10)
geomean 19.60n 19.07n -2.71%
Updates #12486
Change-Id: I2e2320cc4384f875f41721374da536bab995c1ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This abstraction provides a nicer way to work with
maps of slices without having to write out three long type
params.
This also allows it to provide an AsMap implementation which
copies the map and the slices at least.
Updates tailscale/corp#20910
Signed-off-by: Maisem Ali <maisem@tailscale.com>
NewContainsIPFunc returns a contains matcher optimized for its
input. Use that instead of what this did before, always doing a test
over each of a list of netip.Prefixes.
goos: darwin
goarch: arm64
pkg: tailscale.com/wgengine/filter
│ before │ after │
│ sec/op │ sec/op vs base │
FilterMatch/file1-8 32.60n ± 1% 18.87n ± 1% -42.12% (p=0.000 n=10)
Updates #12486
Change-Id: I8f902bc064effb431e5b46751115942104ff6531
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Without this rule, Windows 8.1 and newer devices issue parallel DNS requests to DNS servers
associated with all network adapters, even when "Override local DNS" is enabled and/or
a Mullvad exit node is being used, resulting in DNS leaks.
This also adds "disable-local-dns-override-via-nrpt" nodeAttr that can be used to disable
the new behavior if needed.
Fixestailscale/corp#20718
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Updates tailscale/tailscale#4136
This PR is the first round of work to move from encoding health warnings as strings and use structured data instead. The current health package revolves around the idea of Subsystems. Each subsystem can have (or not have) a Go error associated with it. The overall health of the backend is given by the concatenation of all these errors.
This PR polishes the concept of Warnable introduced by @bradfitz a few weeks ago. Each Warnable is a component of the backend (for instance, things like 'dns' or 'magicsock' are Warnables). Each Warnable has a unique identifying code. A Warnable is an entity we can warn the user about, by setting (or unsetting) a WarningState for it. Warnables have:
- an identifying Code, so that the GUI can track them as their WarningStates come and go
- a Title, which the GUIs can use to tell the user what component of the backend is broken
- a Text, which is a function that is called with a set of Args to generate a more detailed error message to explain the unhappy state
Additionally, this PR also begins to send Warnables and their WarningStates through LocalAPI to the clients, using ipn.Notify messages. An ipn.Notify is only issued when a warning is added or removed from the Tracker.
In a next PR, we'll get rid of subsystems entirely, and we'll start using structured warnings for all errors affecting the backend functionality.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
Fixestailscale/corp#18366.
This PR provides serial number collection on iOS, by allowing system administrators to pass a `DeviceSerialNumber` MDM key which can be read by the `posture` package in Go.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
S4U logons do not automatically load the associated user profile. In this
PR we add UserProfile to handle that part. Windows docs indicate that
we should try to resolve a remote profile path when present, so we attempt
to do so when the local computer is joined to a domain.
Updates #12383
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
We do not intend to use this value for feature support communication in
the future, and have applied changes elsewhere that now fix the expected
value.
Updates tailscale/corp#19391
Updates tailscale/corp#20398
Signed-off-by: James Tucker <james@tailscale.com>
This commit introduces a userspace program for managing an experimental
eBPF XDP STUN server program. derp/xdp contains the eBPF pseudo-C along
with a Go pkg for loading it and exporting its metrics.
cmd/xdpderper is a package main user of derp/xdp.
Updates tailscale/corp#20689
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This refactors the logic for determining whether a packet should be sent
to the host or not into a function, and then adds tests for it.
Updates #11304
Updates #12448
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ief9afa98eaffae00e21ceb7db073c61b170355e5
Fix a bug where, for a subnet router that advertizes
4via6 route, all packets with a source IP matching
the 4via6 address were being sent to the host itself.
Instead, only send to host packets whose destination
address is host's local address.
Fixestailscale/tailscale#12448
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Andrew Dunham <andrew@du.nham.ca>
Checking in the incubator as this used to do fails because
the getenforce command is not on the PATH.
Updates #12442
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Fixestailscale/corp#20677
On macOS sleep/wake, we're encountering a condition where reconfigure the network
a little bit too quickly - before apple has set the nameservers for our interface.
This results in a persistent condition where we have no upstream resolver and
fail all forwarded DNS queries.
No upstream nameservers is a legitimate configuration, and we have no (good) way
of determining when Apple is ready - but if we need to forward a query, and we
have no nameservers, then something has gone badly wrong and the network is
very broken.
A simple fix here is to simply inject a netMon event, which will go through the
configuration dance again when we hit the SERVFAIL condition.
Tested by artificially/randomly returning [] for the list of nameservers in the bespoke
ipn-bridge code responsible for getting the nameservers.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
As an alterative to #11935 using #12003.
Updates #11935
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I05f643fe812ceeaec5f266e78e3e529cab3a1ac3
Add an additional RecorderAddrs field to tailscale.com/cap/kubernetes
capability. RecorderAddrs will only be populated by control
with the addresses of any tsrecorder tags set via Recorder.
Updates tailscale/corp#19821
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
When we're starting child processes on Windows that are CLI programs that
don't need to output to a console, we should pass in DETACHED_PROCESS as a
CreationFlag on SysProcAttr. This prevents the OS from even creating a console
for the child (and paying the associated time/space penalty for new conhost
processes). This is more efficient than letting the OS create the console
window and then subsequently trying to hide it, which we were doing at a few
callsites.
Fixes#12270
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
As quad-100 is an authoritative server for 4via6 domains, it should always return responses
with a response code of 0 (indicating no error) when resolving records for these domains.
If there's no resource record of the specified type (e.g. A), it should return a response
with an empty answer section rather than NXDomain. Such a response indicates that there
is at least one RR of a different type (e.g., AAAA), suggesting the Windows stub resolver
to look for it.
Fixestailscale/corp#20767
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This adds a variant for Connect that takes in a context.Context
which allows passing through cancellation etc by the caller.
Updates tailscale/corp#18266
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This is a variant of DoChan that supports context propagation, such that
the context provided to the inner function will only be canceled when
there are no more waiters for a given key. This can be used to
deduplicate expensive and cancelable calls among multiple callers
safely.
Updates #11935
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ibe1fb67442a854babbc6924fd8437b02cc9e7bcf
Add a new TS_EXPERIMENTAL_ENABLE_FORWARDING_OPTIMIZATIONS env var
that can be set for tailscale/tailscale container running as
a subnet router or exit node to enable UDP GRO forwarding
for improved performance.
See https://tailscale.com/kb/1320/performance-best-practices#linux-optimizations-for-subnet-routers-and-exit-nodes
This is currently considered an experimental approach;
the configuration support is partially to allow further experimentation
with containerized environments to evaluate the performance
improvements.
Updates tailscale/tailscale#12295
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Return empty response and NOERROR for AAAA record queries
for DNS names for which we have an A record.
This is to allow for callers that might be first sending an AAAA query and then,
if that does not return a response, follow with an A record query.
Previously we were returning NOTIMPL that caused some callers
to potentially not follow with an A record query or misbehave in different ways.
Also return NXDOMAIN for AAAA record queries for names
that we DO NOT have an A record for to ensure that the callers
do not follow up with an A record query.
Returning an empty response and NOERROR is the behaviour
that RFC 4074 recommends:
https://datatracker.ietf.org/doc/html/rfc4074
Updates tailscale/tailscale#12321
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
AllocateContiguousBuffer is for allocating structs with trailing buffers
containing additional data. It is to be used for various Windows structures
containing pointers to data located immediately after the struct.
SetNTString performs in-place setting of windows.NTString and
windows.NTUnicodeString.
Updates #12383
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This PR is in prep of adding logic to control to be able to parse
tailscale.com/cap/kubernetes grants in control:
- moves the type definition of PeerCapabilityKubernetes cap to a location
shared with control.
- update the Kubernetes cap rule definition with fields for granting
kubectl exec session recording capabilities.
- adds a convenience function to produce tailcfg.RawMessage from an
arbitrary cap rule and a test for it.
An example grant defined via ACLs:
"grants": [{
"src": ["tag:eng"],
"dst": ["tag:k8s-operator"],
"app": {
"tailscale.com/cap/kubernetes": [{
"recorder": ["tag:my-recorder"]
“enforceRecorder”: true
}],
},
}
]
This grant enforces `kubectl exec` sessions from tailnet clients,
matching `tag:eng` via API server proxy matching `tag:k8s-operator`
to be recorded and recording to be sent to a tsrecorder instance,
matching `tag:my-recorder`.
The type needs to be shared with control because we want
control to parse this cap and resolve tags to peer IPs.
Updates tailscale/corp#19821
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Add a new .spec.tailscale.acceptRoutes field to ProxyClass,
that can be optionally set to true for the proxies to
accept routes advertized by other nodes on tailnet (equivalent of
setting --accept-routes to true).
Updates tailscale/tailscale#12322,tailscale/tailscale#10684
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Also removes hardcoded image repo/tag from example DNSConfig resource
as the operator now knows how to default those.
Updates tailscale/tailscale#11019
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Add new fields TailnetIPs and Hostname to Connector Status. These
contain the addresses of the Tailscale node that the operator created
for the Connector to aid debugging.
Fixes#12214
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
cmd/k8s-operator,k8s-operator,go.{mod,sum}: make individual proxy images/image pull policies configurable
Allow to configure images and image pull policies for individual proxies
via ProxyClass.Spec.StatefulSet.Pod.{TailscaleContainer,TailscaleInitContainer}.Image,
and ProxyClass.Spec.StatefulSet.Pod.{TailscaleContainer,TailscaleInitContainer}.ImagePullPolicy
fields.
Document that we have images in ghcr.io on the relevant Helm chart fields.
Updates tailscale/tailscale#11675
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
