Adds a new reconciler that reconciles ExternalName Services that define a
tailnet target that should be exposed to cluster workloads on a ProxyGroup's
proxies.
The reconciler ensures that for each such service, the config mounted to
the proxies is updated with the tailnet target definition and that
and EndpointSlice and ClusterIP Service are created for the service.
Adds a new reconciler that ensures that as proxy Pods become ready to route
traffic to a tailnet target, the EndpointSlice for the target is updated
with the Pods' endpoints.
Updates tailscale/tailscale#13406
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The operator creates a non-reusable auth key for each of
the cluster proxies that it creates and puts in the tailscaled
configfile mounted to the proxies.
The proxies are always tagged, and their state is persisted
in a Kubernetes Secret, so their node keys are expected to never
be regenerated, so that they don't need to re-auth.
Some tailnet configurations however have seen issues where the auth
keys being left in the tailscaled configfile cause the proxies
to end up in unauthorized state after a restart at a later point
in time.
Currently, we have not found a way to reproduce this issue,
however this commit removes the auth key from the config once
the proxy can be assumed to have logged in.
If an existing, logged-in proxy is upgraded to this version,
its redundant auth key will be removed from the conffile.
If an existing, logged-in proxy is downgraded from this version
to a previous version, it will work as before without re-issuing key
as the previous code did not enforce that a key must be present.
Updates tailscale/tailscale#13451
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator,k8s-operator,kube: Add TSRecorder CRD + controller
Deploys tsrecorder images to the operator's cluster. S3 storage is
configured via environment variables from a k8s Secret. Currently
only supports a single tsrecorder replica, but I've tried to take early
steps towards supporting multiple replicas by e.g. having a separate
secret for auth and state storage.
Example CR:
```yaml
apiVersion: tailscale.com/v1alpha1
kind: Recorder
metadata:
name: rec
spec:
enableUI: true
```
Updates #13298
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
cmd/containerboot,cmd/k8s-operator: enable IPv6 for fqdn egress proxies
Don't skip installing egress forwarding rules for IPv6 (as long as the host
supports IPv6), and set headless services `ipFamilyPolicy` to
`PreferDualStack` to optionally enable both IP families when possible. Note
that even with `PreferDualStack` set, testing a dual-stack GKE cluster with
the default DNS setup of kube-dns did not correctly set both A and
AAAA records for the headless service, and instead only did so when
switching the cluster DNS to Cloud DNS. For both IPv4 and IPv6 to work
simultaneously in a dual-stack cluster, we require headless services to
return both A and AAAA records.
If the host doesn't support IPv6 but the FQDN specified only has IPv6
addresses available, containerboot will exit with error code 1 and an
error message because there is no viable egress route.
Fixes#12215
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Adds a new TailscaleProxyReady condition type for use in corev1.Service
conditions.
Also switch our CRDs to use metav1.Condition instead of
ConnectorCondition. The Go structs are seralized identically, but it
updates some descriptions and validation rules. Update k8s
controller-tools and controller-runtime deps to fix the documentation
generation for metav1.Condition so that it excludes comments and
TODOs.
Stop expecting the fake client to populate TypeMeta in tests. See
kubernetes-sigs/controller-runtime#2633 for details of the change.
Finally, make some minor improvements to validation for service hostnames.
Fixes#12216
Co-authored-by: Irbe Krumina <irbe@tailscale.com>
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
Add a new .spec.tailscale.acceptRoutes field to ProxyClass,
that can be optionally set to true for the proxies to
accept routes advertized by other nodes on tailnet (equivalent of
setting --accept-routes to true).
Updates tailscale/tailscale#12322,tailscale/tailscale#10684
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Turn off stateful filtering for egress proxies to allow cluster
traffic to be forwarded to tailnet.
Allow configuring stateful filter via tailscaled config file.
Deprecate EXPERIMENTAL_TS_CONFIGFILE_PATH env var and introduce a new
TS_EXPERIMENTAL_VERSIONED_CONFIG env var that can be used to provide
containerboot a directory that should contain one or more
tailscaled config files named cap-<tailscaled-cap-version>.hujson.
Containerboot will pick the one with the newest capability version
that is not newer than its current capability version.
Proxies with this change will not work with older Tailscale
Kubernetes operator versions - users must ensure that
the deployed operator is at the same version or newer (up to
4 version skew) than the proxies.
Updates tailscale/tailscale#12061
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Before attempting to enable IPv6 forwarding in the proxy init container
check if the relevant module is found, else the container crashes
on hosts that don't have it.
Updates#11860
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Adds a new .spec.metrics field to ProxyClass to allow users to optionally serve
client metrics (tailscaled --debug) on <Pod-IP>:9001.
Metrics cannot currently be enabled for proxies that egress traffic to tailnet
and for Ingress proxies with tailscale.com/experimental-forward-cluster-traffic-via-ingress annotation
(because they currently forward all cluster traffic to their respective backends).
The assumption is that users will want to have these metrics enabled
continuously to be able to monitor proxy behaviour (as opposed to enabling
them temporarily for debugging). Hence we expose them on Pod IP to make it
easier to consume them i.e via Prometheus PodMonitor.
Updates tailscale/tailscale#11292
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/containerboot,util/linuxfw: support proxy backends specified by DNS name
Adds support for optionally configuring containerboot to proxy
traffic to backends configured by passing TS_EXPERIMENTAL_DEST_DNS_NAME env var
to containerboot.
Containerboot will periodically (every 10 minutes) attempt to resolve
the DNS name and ensure that all traffic sent to the node's
tailnet IP gets forwarded to the resolved backend IP addresses.
Currently:
- if the firewall mode is iptables, traffic will be load balanced
accross the backend IP addresses using round robin. There are
no health checks for whether the IPs are reachable.
- if the firewall mode is nftables traffic will only be forwarded
to the first IP address in the list. This is to be improved.
* cmd/k8s-operator: support ExternalName Services
Adds support for exposing endpoints, accessible from within
a cluster to the tailnet via DNS names using ExternalName Services.
This can be done by annotating the ExternalName Service with
tailscale.com/expose: "true" annotation.
The operator will deploy a proxy configured to route tailnet
traffic to the backend IPs that service.spec.externalName
resolves to. The backend IPs must be reachable from the operator's
namespace.
Updates tailscale/tailscale#10606
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Adds new ProxyClass.spec.statefulSet.pod.{tailscaleContainer,tailscaleInitContainer}.Env field
that allow users to provide key, value pairs that will be set as env vars for the respective containers.
Allow overriding all containerboot env vars,
but warn that this is not supported and might break (in docs + a warning when validating ProxyClass).
Updates tailscale/tailscale#10709
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Fix a bug where all proxies got configured with --accept-routes set to true.
The bug was introduced in https://github.com/tailscale/tailscale/pull/11238.
Updates#cleanup
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Containerboot container created for operator's ingress and egress proxies
are now always configured by passing a configfile to tailscaled
(tailscaled --config <configfile-path>.
It does not run 'tailscale set' or 'tailscale up'.
Upgrading existing setups to this version as well as
downgrading existing setups at this version works.
Updates tailscale/tailscale#10869
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/k8s-operator,k8s-operator: introduce proxy configuration mechanism via ProxyClass custom resource.
ProxyClass custom resource can be used to specify customizations
for the proxy resources created by the operator.
Add a reconciler that validates ProxyClass resources
and sets a Ready condition to True or False with a corresponding reason and message.
This is required because some fields (labels and annotations)
require complex validations that cannot be performed at custom resource apply time.
Reconcilers that use the ProxyClass to configure proxy resources are expected to
verify that the ProxyClass is Ready and not proceed with resource creation
if configuration from a ProxyClass that is not yet Ready is required.
If a tailscale ingress/egress Service is annotated with a tailscale.com/proxy-class annotation, look up the corresponding ProxyClass and, if it is Ready, apply the configuration from the ProxyClass to the proxy's StatefulSet.
If a tailscale Ingress has a tailscale.com/proxy-class annotation
and the referenced ProxyClass custom resource is available and Ready,
apply configuration from the ProxyClass to the proxy resources
that will be created for the Ingress.
Add a new .proxyClass field to the Connector spec.
If connector.spec.proxyClass is set to a ProxyClass that is available and Ready,
apply configuration from the ProxyClass to the proxy resources created for the Connector.
Ensure that when Helm chart is packaged, the ProxyClass yaml is added to chart templates. Ensure that static manifest generator adds ProxyClass yaml to operator.yaml. Regenerate operator.yaml
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
* cmd/containerboot,cmd/k8s-operator/deploy/manifests: optionally forward cluster traffic via ingress proxy.
If a tailscale Ingress has tailscale.com/experimental-forward-cluster-traffic-via-ingress annotation, configure the associated ingress proxy to have its tailscale serve proxy to listen on Pod's IP address. This ensures that cluster traffic too can be forwarded via this proxy to the ingress backend(s).
In containerboot, if EXPERIMENTAL_PROXY_CLUSTER_TRAFFIC_VIA_INGRESS is set to true
and the node is Kubernetes operator ingress proxy configured via Ingress,
make sure that traffic from within the cluster can be proxied to the ingress target.
Updates tailscale/tailscale#10499
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
So that users have predictable label values to use when configuring network policies.
Updates tailscale/tailscale#10854
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
cmd/k8s-operator/deploy/crds,k8s-operator/apis/v1alpha1: allow to define an exit node via Connector CR.
Make it possible to define an exit node to be deployed to a Kubernetes cluster
via Connector Custom resource.
Also changes to Connector API so that one Connector corresponds
to one Tailnet node that can be either a subnet router or an exit
node or both.
The Kubernetes operator parses Connector custom resource and,
if .spec.isExitNode is set, configures that Tailscale node deployed
for that connector as an exit node.
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
