This adds SmallSet.SoleElement, which I need in another repo for
efficiency. I added tests, but those tests failed because Add(1) +
Add(1) was promoting the first Add's sole element to a map of one
item. So fix that, and add more tests.
Updates tailscale/corp#29093
Change-Id: Iadd5ad08afe39721ee5449343095e389214d8389
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Using WINHTTP_AUTOPROXY_ALLOW_AUTOCONFIG on Windows versions older than Windows 10 1703 (build 15063)
is not supported and causes WinHttpGetProxyForUrl to fail with ERROR_INVALID_PARAMETER. This results in failures
reaching the control on environments where a proxy is required.
We use wingoes version detection to conditionally set the WINHTTP_AUTOPROXY_ALLOW_AUTOCONFIG flag
on Windows builds greater than 15063.
While there, we also update proxy detection to use WINHTTP_AUTO_DETECT_TYPE_DNS_A, as DNS-based proxy discovery
might be required with Active Directory and in certain other environments.
Updates tailscale/corp#29168
Fixes#879
Signed-off-by: Nick Khyl <nickk@tailscale.com>
The field must only be accessed while holding LocalBackend's mutex,
but there are two places where it's accessed without the mutex:
- (LocalBackend).MaybeClearAppConnector()
- handleC2NAppConnectorDomainRoutesGet()
Fixes#16123
Signed-off-by: Nick Khyl <nickk@tailscale.com>
As note in the comment, it now being more than six months since this was
deprecated and there being no (further) uses of the old pattern in our internal
services, let's drop the migrator.
Updates #cleanup
Change-Id: Ie4fb9518b2ca04a9b361e09c51cbbacf1e2633a8
Signed-off-by: M. J. Fromberger <fromberger@tailscale.com>
fixestailscale/corp#25612
We now keep track of any dns configurations which we could not
compile. This gives RecompileDNSConfig a configuration to
attempt to recompile and apply when the OS pokes us to indicate
that the interface dns servers have changed/updated. The manager config
will remain unset until we have the required information to compile
it correctly which should eliminate the problematic SERVFAIL
responses (especially on macOS 15).
This also removes the missingUpstreamRecovery func in the forwarder
which is no longer required now that we have proper error handling
and recovery manager and the client.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
relayManager is responsible for disco ping/pong probing of relay
endpoints once a handshake is complete.
Future work will enable relayManager to set a relay endpoint as the best
UDP path on an endpoint if appropriate.
Updates tailscale/corp#27502
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Fix the wireshark lua dissector to support 0 bit position
and not throw modulo div by 0 errors.
Add new disco frame types to the decoder.
Updates tailscale/corp#29036
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
Add comprehensive web interface at ui for managing OIDC clients, similar to tsrecorder's design. Features include list view, create/edit forms with validation, client secret management, delete functionality with confirmation dialogs, responsive design, and restricted tailnet access only.
Fixes#16067
Signed-off-by: Raj Singh <raj@tailscale.com>
In accordance with the OIDC/OAuth 2.0 protocol, do not send an empty
refresh_token and instead omit the field when empty.
Fixes https://github.com/tailscale/tailscale/issues/16073
Signed-off-by: Tim Klocke <taaem@mailbox.org>
Previously, a missing or invalid `dns` parameter on GET `/dns-query`
returned only “missing ‘dns’ parameter”. Now the error message guides
users to use `?dns=` or `?q=`.
Updates: #16055
Signed-off-by: Zach Buchheit <zachb@tailscale.com>
Validate that any tags that users have specified via tailscale.com/tags
annotation are valid Tailscale ACL tags.
Validate that no more than one HA Tailscale Kubernetes Services in a single cluster refer
to the same Tailscale Service.
Updates tailscale/tailscale#16054
Updates tailscale/tailscale#16035
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
As noted in #16048, the ./ssh/tailssh package failed to build on
Android, because GOOS=android also matches the "linux" build
tag. Exclude Android like iOS is excluded from macOS (darwin).
This now works:
$ GOOS=android go install ./ipn/ipnlocal ./ssh/tailssh
The original PR at #16048 is also fine, but this stops the problem
earlier.
Updates #16048
Change-Id: Ie4a6f6966a012e510c9cb11dd0d1fa88c48fac37
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
RELNOTE=Fix CSRF errors in the client Web UI
Replace gorilla/csrf with a Sec-Fetch-Site based CSRF protection
middleware that falls back to comparing the Host & Origin headers if no
SFS value is passed by the client.
Add an -origin override to the web CLI that allows callers to specify
the origin at which the web UI will be available if it is hosted behind
a reverse proxy or within another application via CGI.
Updates #14872
Updates #15065
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
To authenticate mesh keys, the DERP servers used a simple == comparison,
which is susceptible to a side channel timing attack.
By extracting the mesh key for a DERP server, an attacker could DoS it
by forcing disconnects using derp.Client.ClosePeer. They could also
enumerate the public Wireguard keys, IP addresses and ports for nodes
connected to that DERP server.
DERP servers configured without mesh keys deny all such requests.
This patch also extracts the mesh key logic into key.DERPMesh, to
prevent this from happening again.
Security bulletin: https://tailscale.com/security-bulletins#ts-2025-003Fixestailscale/corp#28720
Signed-off-by: Simon Law <sfllaw@tailscale.com>
* control/controlclient,health,tailcfg: refactor control health messages
Updates tailscale/corp#27759
Signed-off-by: James Sanderson <jsanderson@tailscale.com>
Signed-off-by: Paul Scott <408401+icio@users.noreply.github.com>
Co-authored-by: Paul Scott <408401+icio@users.noreply.github.com>
Registering a new store is cheap, it just adds a map entry. No need to
lazy-init it with sync.Once and an intermediate slice holding init
functions.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Create FileOps for calling platform-specific file operations such as SAF APIs in Taildrop
Update taildrop.PutFile to support both traditional and SAF modes
Updates tailscale/tailscale#15263
Signed-off-by: kari-ts <kari@tailscale.com>
Use of the httptest client doesn't render header ordering
as expected.
Use http.DefaultClient for the test to ensure that
the header ordering test is valid.
Updates tailscale/corp#27370
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
This type improves code clarity and reduces the chance of heap alloc as
we pass it as a non-pointer. VNI being a 3-byte value enables us to
track set vs unset via the reserved/unused byte.
Updates tailscale/corp#27502
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Taildrop wasn't working on iOS since #15971 because GetExt didn't work
until after init, but that PR moved Init until after Start.
This makes GetExt work before LocalBackend.Start (ExtensionHost.Init).
Updates #15812
Change-Id: I6e87257cd97a20f86083a746d39df223e5b6791b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The same message was used for "up" and "down" permission failures, but
"set" works better for both. Suggesting "up --operator" for a "down"
permission failure was confusing.
It's not like the latter command works in one shot anyway.
Fixes#16008
Change-Id: I6e4225ef06ce2d8e19c40bece8104e254c2aa525
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This fixes the implementation and test from #15208 which apparently
never worked.
Ignore the metacert when counting the number of expected certs
presented.
And fix the test, pulling out the TLSConfig setup code into something
shared between the real cmd/derper and the test.
Fixes#15579
Change-Id: I90526e38e59f89b480629b415f00587b107de10a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This reconciler allows users to make applications highly available at L3 by
leveraging Tailscale Virtual Services. Many Kubernetes Service's
(irrespective of the cluster they reside in) can be mapped to a
Tailscale Virtual Service, allowing access to these Services at L3.
Updates #15895
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
Adds Recorder fields to configure the name and annotations of the ServiceAccount
created for and used by its associated StatefulSet. This allows the created Pod
to authenticate with AWS without requiring a Secret with static credentials,
using AWS' IAM Roles for Service Accounts feature, documented here:
https://docs.aws.amazon.com/eks/latest/userguide/iam-roles-for-service-accounts.htmlFixes#15875
Change-Id: Ib0e15c0dbc357efa4be260e9ae5077bacdcb264f
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
cmd/containerboot,kube/ingressservices: proxy VIPService TCP/UDP traffic to cluster Services
This PR is part of the work to implement HA for Kubernetes Operator's
network layer proxy.
Adds logic to containerboot to monitor mounted ingress firewall configuration rules
and update iptables/nftables rules as the config changes.
Also adds new shared types for the ingress configuration.
The implementation is intentionally similar to that for HA for egress proxy.
Updates tailscale/tailscale#15895
Signed-off-by: chaosinthecrd <tom@tmlabs.co.uk>
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
CallMeMaybeVia reception and endpoint allocation have been collapsed to
a single event channel. discoInfo caching for active relay handshakes
is now implemented.
Updates tailscale/corp#27502
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Content-type was responding as test/plain for probes
accepting application/json. Set content type header
before setting the response code to correct this.
Updates tailscale/corp#27370
Signed-off-by: Mike O'Driscoll <mikeo@tailscale.com>
Update proxy-to-grafana to strip any X-Webauth prefixed headers passed
by the client in *every* request, not just those to /login.
/api/ routes will also accept these headers to authenticate users,
necessitating their removal to prevent forgery.
Updates tailscale/corp#28687
Signed-off-by: Patrick O'Doherty <patrick@tailscale.com>
Currently, LocalBackend/ExtensionHost doesn't invoke the profile change callback for the initial profile.
Since the initial profile may vary depending on loaded extensions and applied policy settings,
it can't be reliably determined until all extensions are initialized. Additionally, some extensions
may asynchronously trigger a switch to the "best" profile (based on system state and policy settings) during
initialization.
We intended to address these issues as part of the ongoing profileManager/LocalBackend refactoring,
but the changes didn't land in time for the v1.84 release and the Taildrop refactoring.
In this PR, we update the Taildrop extension to retrieve the current profile at initialization time
and handle it as a profile change.
We also defer extension initialization until LocalBackend has started, since the Taildrop extension
already relies on this behavior (e.g., it requires clients to call SetDirectFileRoot before Init).
Fixes#15970
Updates #15812
Updates tailscale/corp#28449
Signed-off-by: Nick Khyl <nickk@tailscale.com>
`cmd/derpprobe --once` didn’t respect the convention of non-zero exit
status for a failed run. It would always exit zero (i.e. success),
even. This patch fixes that, but only for `--once` mode.
Fixes: #15925
Signed-off-by: Simon Law <sfllaw@tailscale.com>
In this PR, we make DNS registration behavior configurable via the EnableDNSRegistration policy setting.
We keep the default behavior unchanged, but allow admins to either enforce DNS registration and dynamic
DNS updates for the Tailscale interface, or prevent Tailscale from modifying the settings configured in
the network adapter's properties or by other means.
Updates #14917
Signed-off-by: Nick Khyl <nickk@tailscale.com>
