Rather than building a new suggested exit node set every time, compute
it once on first use. Currently, syspolicy ensures that values do not
change without a restart anyway.
Since the set is being constructed in a separate func now, the test code
that manipulates syspolicy can live there, and the TestSuggestExitNode
can now run in parallel with other tests because it does not have global
dependencies.
Updates tailscale/corp#19681
Change-Id: Ic4bb40ccc91b671f9e542bd5ba9c96f942081515
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Clean up the updater goroutine on shutdown, in addition to doing that on
backend state change. This fixes a goroutine leak on shutdown in tests.
Updates #cleanup
When the client is disconnected from control for any reason (typically
just turned off), we should still attempt to update if auto-updates are
enabled. This may help users who turn tailscale on infrequently for
accessing resources.
RELNOTE: Apply auto-updates even if the node is down or disconnected
from the coordination server.
Updates #12117
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
In order to test the sticky last suggestion code, a test was written for
LocalBackend.SuggestExitNode but it contains a random number generator
which makes writing comprehensive tests very difficult. This doesn't
change how the last suggestion works, but it adds some infrastructure to
make that easier in a later PR.
This adds func parameters for the two randomized parts: breaking ties
between DERP regions and breaking ties between nodes. This way tests can
validate the entire list of tied options, rather than expecting a
particular outcome given a particular random seed.
As a result of this, the global random number generator can be used
rather than seeding a local one each time.
In order to see the tied nodes for the location based (i.e. Mullvad)
case, pickWeighted needed to return a slice instead of a single
arbitrary option, so there is a small change in how that works.
Updates tailscale/corp#19681
Change-Id: I83c48a752abdec0f59c58ccfd8bfb3f3f17d0ea8
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
This mostly removes a lot of repetition by predefining some nodes and
other data structures, plus adds some helpers for creating Peer entries
in the netmap. Several existing test cases were reworked to ensure
better coverage of edge cases, and several new test cases were added to
handle some additional responsibility that is in (or will be shortly
moving in) suggestExitNode().
Updates tailscale/corp#19681
Change-Id: Ie14c2988d7fd482f7d6a877f78525f7788669b85
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
A non-signing node can be allowed to re-sign its new node keys following
key renewal/rotation (e.g. via `tailscale up --force-reauth`). To be
able to do this, node's TLK is written into WrappingPubkey field of the
initial SigDirect signature, signed by a signing node.
The intended use of this field implies that, for each WrappingPubkey, we
typically expect to have at most one active node with a signature
tracing back to that key. Multiple valid signatures referring to the
same WrappingPubkey can occur if a client's state has been cloned, but
it's something we explicitly discourage and don't support:
https://tailscale.com/s/clone
This change propagates rotation details (wrapping public key, a list
of previous node keys that have been rotated out) to netmap processing,
and adds tracking of obsolete node keys that, when found, will get
filtered out.
Updates tailscale/corp#19764
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
This adds a new ListenPacket function on tsnet.Server
which acts mostly like `net.ListenPacket`.
Unlike `Server.Listen`, this requires listening on a
specific IP and does not automatically listen on both
V4 and V6 addresses of the Server when the IP is unspecified.
To test this, it also adds UDP support to tsdial.Dialer.UserDial
and plumbs it through the localapi. Then an associated test
to make sure the UDP functionality works from both sides.
Updates #12182
Signed-off-by: Maisem Ali <maisem@tailscale.com>
- Add current node signature to `ipnstate.NetworkLockStatus`;
- Print current node signature in a human-friendly format as part
of `tailscale lock status`.
Examples:
```
$ tailscale lock status
Tailnet lock is ENABLED.
This node is accessible under tailnet lock. Node signature:
SigKind: direct
Pubkey: [OTB3a]
KeyID: tlpub:44a0e23cd53a4b8acc02f6732813d8f5ba8b35d02d48bf94c9f1724ebe31c943
WrappingPubkey: tlpub:44a0e23cd53a4b8acc02f6732813d8f5ba8b35d02d48bf94c9f1724ebe31c943
This node's tailnet-lock key: tlpub:44a0e23cd53a4b8acc02f6732813d8f5ba8b35d02d48bf94c9f1724ebe31c943
Trusted signing keys:
tlpub:44a0e23cd53a4b8acc02f6732813d8f5ba8b35d02d48bf94c9f1724ebe31c943 1 (self)
tlpub:6fa21d242a202b290de85926ba3893a6861888679a73bc3a43f49539d67c9764 1 (pre-auth key kq3NzejWoS11KTM59)
```
For a node created via a signed auth key:
```
This node is accessible under tailnet lock. Node signature:
SigKind: rotation
Pubkey: [e3nAO]
Nested:
SigKind: credential
KeyID: tlpub:6fa21d242a202b290de85926ba3893a6861888679a73bc3a43f49539d67c9764
WrappingPubkey: tlpub:3623b0412cab0029cb1918806435709b5947ae03554050f20caf66629f21220a
```
For a node that rotated its key a few times:
```
This node is accessible under tailnet lock. Node signature:
SigKind: rotation
Pubkey: [DOzL4]
Nested:
SigKind: rotation
Pubkey: [S/9yU]
Nested:
SigKind: rotation
Pubkey: [9E9v4]
Nested:
SigKind: direct
Pubkey: [3QHTJ]
KeyID: tlpub:44a0e23cd53a4b8acc02f6732813d8f5ba8b35d02d48bf94c9f1724ebe31c943
WrappingPubkey: tlpub:2faa280025d3aba0884615f710d8c50590b052c01a004c2b4c2c9434702ae9d0
```
Updates tailscale/corp#19764
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
The `--wait` flag for `systemd-run` was added in systemd 232. While it
is quite old, it doesn't hurt to special-case them and skip the `--wait`
flag. The consequence is that we lose the update command output in logs,
but at least auto-updates will work.
Fixes#12136
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
After some analysis, stateful filtering is only necessary in tailnets
that use `autogroup:danger-all` in `src` in ACLs. And in those cases
users explicitly specify that hosts outside of the tailnet should be
able to reach their nodes. To fix local DNS breakage in containers, we
disable stateful filtering by default.
Updates #12108
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
It was requested by the first customer 4-5 years ago and only used
for a brief moment of time. We later added netmap visibility trimming
which removes the need for this.
It's been hidden by the CLI for quite some time and never documented
anywhere else.
This keeps the CLI flag, though, out of caution. It just returns an
error if it's set to anything but true (its default).
Fixes#12058
Change-Id: I7514ba572e7b82519b04ed603ff9f3bdbaecfda7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Updates #12172 (then need to update other repos)
Change-Id: I439f65e0119b09e00da2ef5c7a4f002f93558578
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The previous LocalBackend & CLI 'up' changes improved some stuff, but
might've been too aggressive in some edge cases.
This simplifies the authURL vs authURLSticky distinction and removes
the interact field, which seemed to just just be about duplicate URL
suppression in IPN bus, back from when the IPN bus was a single client
at a time. This moves that suppression to a different spot.
Fixes#12119
Updates #12028
Updates #12042
Change-Id: I1f8800b1e82ccc1c8a0d7abba559e7404ddf41e4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Turn off stateful filtering for egress proxies to allow cluster
traffic to be forwarded to tailnet.
Allow configuring stateful filter via tailscaled config file.
Deprecate EXPERIMENTAL_TS_CONFIGFILE_PATH env var and introduce a new
TS_EXPERIMENTAL_VERSIONED_CONFIG env var that can be used to provide
containerboot a directory that should contain one or more
tailscaled config files named cap-<tailscaled-cap-version>.hujson.
Containerboot will pick the one with the newest capability version
that is not newer than its current capability version.
Proxies with this change will not work with older Tailscale
Kubernetes operator versions - users must ensure that
the deployed operator is at the same version or newer (up to
4 version skew) than the proxies.
Updates tailscale/tailscale#12061
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Co-authored-by: Maisem Ali <maisem@tailscale.com>
The CLI's "up" is kinda chaotic and LocalBackend.Start is kinda
chaotic and they both need to be redone/deleted (respectively), but
this fixes some buggy behavior meanwhile. We were previously calling
StartLoginInteractive (to start the controlclient's RegisterRequest)
redundantly in some cases, causing test flakes depending on timing and
up's weird state machine.
We only need to call StartLoginInteractive in the client if Start itself
doesn't. But Start doesn't tell us that. So cheat a bit and a put the
information about whether there's a current NodeKey in the ipn.Status.
It used to be accessible over LocalAPI via GetPrefs as a private key but
we removed that for security. But a bool is fine.
So then only call StartLoginInteractive if that bool is false and don't
do it in the WatchIPNBus loop.
Fixes#12028
Updates #12042
Change-Id: I0923c3f704a9d6afd825a858eb9a63ca7c1df294
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There was a small window in ipnserver after we assigned a LocalBackend
to the ipnserver's atomic but before we Start'ed it where our
initalization Start could conflict with API calls from the LocalAPI.
Simplify that a bit and lay out the rules in the docs.
Updates #12028
Change-Id: Ic5f5e4861e26340599184e20e308e709edec68b1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We used to Lock, Unlock, Lock, Unlock quite a few
times in Start resulting in all sorts of weird race
conditions. Simplify it all and only Lock/Unlock once.
Updates #11649
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This removes one of the Lock,Unlock,Lock,Unlock at least in
the Start function. Still has 3 more of these.
Updates #11649
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This way the default gets populated on first start, when no existing
state exists to migrate. Also fix `ipn.PrefsFromBytes` to preserve empty
fields, rather than layering `NewPrefs` values on top.
Updates https://github.com/tailscale/corp/issues/19623
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This plumbs a packet filter for jailed nodes through to the
tstun.Wrapper; the filter for a jailed node is equivalent to a "shields
up" filter. Currently a no-op as there is no way for control to
tell the client whether a peer is jailed.
Updates tailscale/corp#19623
Co-authored-by: Andrew Dunham <andrew@du.nham.ca>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Change-Id: I5ccc5f00e197fde15dd567485b2a99d8254391ad
I noticed this while working on the following fix to #11962.
Updates #11962
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: I4c5894d8899d1ae8c42f54ecfd4d05a4a7ac598c
We'd like to use tsdial.Dialer.UserDial instead of SystemDial for DNS over TCP.
This is primarily necessary to properly dial internal DNS servers accessible
over Tailscale and subnet routes. However, to avoid issues when switching
between Wi-Fi and cellular, we need to ensure that we don't retain connections
to any external addresses on the old interface. Therefore, we need to determine
which dialer to use internally based on the configured routes.
This plumbs routes and localRoutes from router.Config to tsdial.Dialer,
and updates UserDial to use either the peer dialer or the system dialer,
depending on the network address and the configured routes.
Updates tailscale/corp#18725
Fixes#4529
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Setting the field after-the-fact wasn't working because we could migrate
prefs on creation, which would set health status for auto updates.
Updates #11986
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I41d79ebd61d64829a3a9e70586ce56f62d24ccfd
It's deprecated and using it gets us the old slow behavior
according to https://go.dev/blog/randv2.
> Having eliminated repeatability of the global output stream, Go 1.20
> was also able to make the global generator scale better in programs
> that don’t call rand.Seed, replacing the Go 1 generator with a very
> cheap per-thread wyrand generator already used inside the Go
> runtime. This removed the global mutex and made the top-level
> functions scale much better. Programs that do call rand.Seed fall
> back to the mutex-protected Go 1 generator.
Updates #7123
Change-Id: Ia5452e66bd16b5457d4b1c290a59294545e13291
Signed-off-by: Maisem Ali <maisem@tailscale.com>
In prep for making health warnings rich objects with metadata rather
than a bunch of strings, start moving it all into the same place.
We'll still ultimately need the stringified form for the CLI and
LocalAPI for compatibility but we'll next convert all these warnings
into Warnables that have severity levels and such, and legacy
stringification will just be something each Warnable thing can do.
Updates #4136
Change-Id: I83e189435daae3664135ed53c98627c66e9e53da
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Also, reset it in a few more places (e.g. logout, new blank profiles,
etc.) to avoid a few more cases where a pre-existing dialPlan can cause
a new Headscale server take 10+ seconds to connect.
Updates #11938
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I3095173a5a3d9720507afe4452548491e9e45a3e
When switching profile, the server URL can change (e.g.
because of switching to a self-hosted headscale instance).
If it is not reset here, dial plans returned by old
server (e.g. tailscale control server) will be used to
connect to new server (e.g. self-hosted headscale server),
and the register request will be blocked by it until
timeout, leading to very slow profile switches.
Updates #11938 11938
Signed-off-by: Shaw Drastin <showier.drastic0a@icloud.com>
This fixes bugs where after using the cli to set AdvertiseRoutes users
were finding that they had to restart tailscaled before the app
connector would advertise previously learned routes again. And seems
more in line with user expectations.
Fixes#11006
Signed-off-by: Fran Bull <fran@tailscale.com>
When an app connector is reconfigured and domains to route are removed,
we would like to no longer advertise routes that were discovered for
those domains. In order to do this we plan to store which routes were
discovered for which domains.
Add a controlknob so that we can enable/disable the new behavior.
Updates #11008
Signed-off-by: Fran Bull <fran@tailscale.com>
Lays the groundwork for the ability to persist app connectors discovered
routes, which will allow us to stop advertising routes for a domain if
the app connector no longer monitors that domain.
Updates #11008
Signed-off-by: Fran Bull <fran@tailscale.com>
cmd/containerboot,kube,ipn/store/kubestore: allow interactive login and empty state Secrets, check perms
* Allow users to pre-create empty state Secrets
* Add a fake internal kube client, test functionality that has dependencies on kube client operations.
* Fix an issue where interactive login was not allowed in an edge case where state Secret does not exist
* Make the CheckSecretPermissions method report whether we have permissions to create/patch a Secret if it's determined that these operations will be needed
Updates tailscale/tailscale#11170
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
In prep for most of the package funcs in net/interfaces to become
methods in a long-lived netmon.Monitor that can cache things. (Many
of the funcs are very heavy to call regularly, whereas the long-lived
netmon.Monitor can subscribe to things from the OS and remember
answers to questions it's asked regularly later)
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: Ie4e8dedb70136af2d611b990b865a822cd1797e5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
