mirror of
https://github.com/tailscale/tailscale.git
synced 2024-11-25 19:15:34 +00:00
210264f942
Fixes #12617 Change-Id: Ifc87b7d9cf699635087afb57febd01fb9a6d11b7 Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
110 lines
4.8 KiB
Markdown
110 lines
4.8 KiB
Markdown
# DERP
|
|
|
|
This is the code for the [Tailscale DERP server](https://tailscale.com/kb/1232/derp-servers).
|
|
|
|
In general, you should not need to or want to run this code. The overwhelming
|
|
majority of Tailscale users (both individuals and companies) do not.
|
|
|
|
In the happy path, Tailscale establishes direct connections between peers and
|
|
data plane traffic flows directly between them, without using DERP for more than
|
|
acting as a low bandwidth side channel to bootstrap the NAT traversal. If you
|
|
find yourself wanting DERP for more bandwidth, the real problem is usually the
|
|
network configuration of your Tailscale node(s), making sure that Tailscale can
|
|
get direction connections via some mechanism.
|
|
|
|
If you've decided or been advised to run your own `derper`, then read on.
|
|
|
|
## Caveats
|
|
|
|
* Node sharing and other cross-Tailnet features don't work when using custom
|
|
DERP servers.
|
|
|
|
* DERP servers only see encrypted WireGuard packets and thus are not useful for
|
|
network-level debugging.
|
|
|
|
* The Tailscale control plane does certain geo-level steering features and
|
|
optimizations that are not available when using custom DERP servers.
|
|
|
|
## Guide to running `cmd/derper`
|
|
|
|
* You must build and update the `cmd/derper` binary yourself. There are no
|
|
packages. Use `go install tailscale.com/cmd/derper@latest` with the latest
|
|
version of Go. You should update this binary approximately as regularly as
|
|
you update Tailscale nodes. If using `--verify-clients`, the `derper` binary
|
|
and `tailscaled` binary on the machine must be built from the same git revision.
|
|
(It might work otherwise, but they're developed and only tested together.)
|
|
|
|
* The DERP protocol does a protocol switch inside TLS from HTTP to a custom
|
|
bidirectional binary protocol. It is thus incompatible with many HTTP proxies.
|
|
Do not put `derper` behind another HTTP proxy.
|
|
|
|
* The `tailscaled` client does its own selection of the fastest/nearest DERP
|
|
server based on latency measurements. Do not put `derper` behind a global load
|
|
balancer.
|
|
|
|
* DERP servers should ideally have both a static IPv4 and static IPv6 address.
|
|
Both of those should be listed in the DERP map so the client doesn't need to
|
|
rely on its DNS which might be broken and dependent on DERP to get back up.
|
|
|
|
* A DERP server should not share an IP address with any other DERP server.
|
|
|
|
* Avoid having multiple DERP nodes in a region. If you must, they all need to be
|
|
meshed with each other and monitored. Having two one-node "regions" in the
|
|
same datacenter is usually easier and more reliable than meshing, at the cost
|
|
of more required connections from clients in some cases. If your clients
|
|
aren't mobile (battery constrained), one node regions are definitely
|
|
preferred. If you really need multiple nodes in a region for HA reasons, two
|
|
is sufficient.
|
|
|
|
* Monitor your DERP servers with [`cmd/derpprobe`](../derpprobe/).
|
|
|
|
* If using `--verify-clients`, a `tailscaled` must be running alongside the
|
|
`derper`, and all clients must be visible to the derper tailscaled in the ACL.
|
|
|
|
* If using `--verify-clients`, a `tailscaled` must also be running alongside
|
|
your `derpprobe`, and `derpprobe` needs to use `--derp-map=local`.
|
|
|
|
* The firewall on the `derper` should permit TCP ports 80 and 443 and UDP port
|
|
3478.
|
|
|
|
* Only LetsEncrypt certs are rotated automatically. Other cert updates require a
|
|
restart.
|
|
|
|
* Don't use a firewall in front of `derper` that suppresses `RST`s upon
|
|
receiving traffic to a dead or unknown connection.
|
|
|
|
* Don't rate-limit UDP STUN packets.
|
|
|
|
* Don't rate-limit outbound TCP traffic (only inbound).
|
|
|
|
## Diagnostics
|
|
|
|
This is not a complete guide on DERP diagnostics.
|
|
|
|
Running your own DERP services requires exeprtise in multi-layer network and
|
|
application diagnostics. As the DERP runs multiple protocols at multiple layers
|
|
and is not a regular HTTP(s) server you will need expertise in correlative
|
|
analysis to diagnose the most tricky problems. There is no "plain text" or
|
|
"open" mode of operation for DERP.
|
|
|
|
* The debug handler is accessible at URL path `/debug/`. It is only accessible
|
|
over localhost or from a Tailscale IP address.
|
|
|
|
* Go pprof can be accessed via the debug handler at `/debug/pprof/`
|
|
|
|
* Prometheus compatible metrics can be gathered from the debug handler at
|
|
`/debug/varz`.
|
|
|
|
* `cmd/stunc` in the Tailscale repository provides a basic tool for diagnosing
|
|
issues with STUN.
|
|
|
|
* `cmd/derpprobe` provides a service for monitoring DERP cluster health.
|
|
|
|
* `tailscale debug derp` and `tailscale netcheck` provide additional client
|
|
driven diagnostic information for DERP communications.
|
|
|
|
* Tailscale logs may provide insight for certain problems, such as if DERPs are
|
|
unreachable or peers are regularly not reachable in their DERP home regions.
|
|
There are many possible misconfiguration causes for these problems, but
|
|
regular log entries are a good first indicator that there is a problem.
|