Merge pull request #122 from Arceliar/addressPrefix

Address prefix change

src/yggdrasil/address.go

@@ -7,9 +7,10 @@ type address [16]byte
 type subnet [8]byte
 
 // address_prefix is the prefix used for all addresses and subnets in the network.
-// The current implementation requires this to be a multiple of 8 bits.
+// The current implementation requires this to be a muliple of 8 bits + 7 bits.
+// The 8th bit of the last byte is used to signal nodes (0) or /64 prefixes (1).
 // Nodes that configure this differently will be unable to communicate with eachother, though routing and the DHT machinery *should* still work.
-var address_prefix = [...]byte{0xfd}
+var address_prefix = [...]byte{0x02}
 
 // isValid returns true if an address falls within the range used by nodes in the network.
 func (a *address) isValid() bool {
@@ -18,24 +19,24 @@ func (a *address) isValid() bool {
 			return false
 		}
 	}
-	return (*a)[len(address_prefix)]&0x80 == 0
+	return true
 }
 
 // isValid returns true if a prefix falls within the range usable by the network.
 func (s *subnet) isValid() bool {
-	for idx := range address_prefix {
+	l := len(address_prefix)
+	for idx := range address_prefix[:l-1] {
 		if (*s)[idx] != address_prefix[idx] {
 			return false
 		}
 	}
-	return (*s)[len(address_prefix)]&0x80 != 0
+	return (*s)[l-1] == address_prefix[l-1]|0x01
 }
 
 // address_addrForNodeID takes a *NodeID as an argument and returns an *address.
-// This address begins with the address prefix.
-// The next bit is 0 for an address, and 1 for a subnet.
-// The following 7 bits are set to the number of leading 1 bits in the NodeID.
-// The NodeID, excluding the leading 1 bits and the first leading 1 bit, is truncated to the appropriate length and makes up the remainder of the address.
+// This subnet begins with the address prefix, with the last bit set to 0 to indicate an address.
+// The following 8 bits are set to the number of leading 1 bits in the NodeID.
+// The NodeID, excluding the leading 1 bits and the first leading 0 bit, is truncated to the appropriate length and makes up the remainder of the address.
 func address_addrForNodeID(nid *NodeID) *address {
 	// 128 bit address
 	// Begins with prefix
@@ -67,16 +68,15 @@ func address_addrForNodeID(nid *NodeID) *address {
 		}
 	}
 	copy(addr[:], address_prefix[:])
-	addr[len(address_prefix)] = ones & 0x7f
+	addr[len(address_prefix)] = ones
 	copy(addr[len(address_prefix)+1:], temp)
 	return &addr
 }
 
 // address_subnetForNodeID takes a *NodeID as an argument and returns a *subnet.
-// This subnet begins with the address prefix.
-// The next bit is 0 for an address, and 1 for a subnet.
-// The following 7 bits are set to the number of leading 1 bits in the NodeID.
-// The NodeID, excluding the leading 1 bits and the first leading 1 bit, is truncated to the appropriate length and makes up the remainder of the subnet.
+// This subnet begins with the address prefix, with the last bit set to 1 to indicate a prefix.
+// The following 8 bits are set to the number of leading 1 bits in the NodeID.
+// The NodeID, excluding the leading 1 bits and the first leading 0 bit, is truncated to the appropriate length and makes up the remainder of the subnet.
 func address_subnetForNodeID(nid *NodeID) *subnet {
 	// Exactly as the address version, with two exceptions:
 	//  1) The first bit after the fixed prefix is a 1 instead of a 0
@@ -84,7 +84,7 @@ func address_subnetForNodeID(nid *NodeID) *subnet {
 	addr := *address_addrForNodeID(nid)
 	var snet subnet
 	copy(snet[:], addr[:])
-	snet[len(address_prefix)] |= 0x80
+	snet[len(address_prefix)-1] |= 0x01
 	return &snet
 }
 
@@ -97,7 +97,7 @@ func (a *address) getNodeIDandMask() (*NodeID, *NodeID) {
 	// This means truncated leading 1s, first leading 0, and visible part of addr
 	var nid NodeID
 	var mask NodeID
-	ones := int(a[len(address_prefix)] & 0x7f)
+	ones := int(a[len(address_prefix)])
 	for idx := 0; idx < ones; idx++ {
 		nid[idx/8] |= 0x80 >> byte(idx%8)
 	}
@@ -125,7 +125,7 @@ func (s *subnet) getNodeIDandMask() (*NodeID, *NodeID) {
 	// As with the address version, but visible parts of the subnet prefix instead
 	var nid NodeID
 	var mask NodeID
-	ones := int(s[len(address_prefix)] & 0x7f)
+	ones := int(s[len(address_prefix)])
 	for idx := 0; idx < ones; idx++ {
 		nid[idx/8] |= 0x80 >> byte(idx%8)
 	}

src/yggdrasil/admin.go

@@ -406,7 +406,7 @@ func (a *admin) startTunWithMTU(ifname string, iftapmode bool, ifmtu int) error
 	_ = a.core.tun.close()
 	// Then reconfigure and start it
 	addr := a.core.router.addr
-	straddr := fmt.Sprintf("%s/%v", net.IP(addr[:]).String(), 8*len(address_prefix))
+	straddr := fmt.Sprintf("%s/%v", net.IP(addr[:]).String(), 8*len(address_prefix)-1)
 	if ifname != "none" {
 		err := a.core.tun.setup(ifname, iftapmode, straddr, ifmtu)
 		if err != nil {

src/yggdrasil/core.go

@@ -117,7 +117,7 @@ func (c *Core) Start(nc *config.NodeConfig, log *log.Logger) error {
 	}
 
 	ip := net.IP(c.router.addr[:]).String()
-	if err := c.tun.start(nc.IfName, nc.IfTAPMode, fmt.Sprintf("%s/8", ip), nc.IfMTU); err != nil {
+	if err := c.tun.start(nc.IfName, nc.IfTAPMode, fmt.Sprintf("%s/%d", ip, 8*len(address_prefix)-1), nc.IfMTU); err != nil {
 		c.log.Println("Failed to start TUN/TAP")
 		return err
 	}

src/yggdrasil/icmpv6.go

@@ -252,7 +252,7 @@ func (i *icmpv6) handle_ndp(in []byte) ([]byte, error) {
 	case source.isValid():
 	case snet.isValid():
 	default:
-		return nil, errors.New("Not an NDP for fd00::/8")
+		return nil, errors.New("Not an NDP for 0200::/7")
 	}
 
 	// Create our NDP message body response

src/yggdrasil/tun_darwin.go

@@ -87,7 +87,7 @@ func (tun *tunDevice) setupAddress(addr string) error {
 
 	ar.ifra_prefixmask.sin6_len = uint8(unsafe.Sizeof(ar.ifra_prefixmask))
 	b := make([]byte, 16)
-	binary.LittleEndian.PutUint16(b, uint16(0xFF00))
+	binary.LittleEndian.PutUint16(b, uint16(0xFE00))
 	ar.ifra_prefixmask.sin6_addr[0] = uint16(binary.BigEndian.Uint16(b))
 
 	ar.ifra_addr.sin6_len = uint8(unsafe.Sizeof(ar.ifra_addr))