mirror of
https://github.com/yggdrasil-network/yggdrasil-go.git
synced 2024-11-27 12:05:23 +00:00
113 lines
7.5 KiB
Markdown
113 lines
7.5 KiB
Markdown
# Yggdrasil
|
|
|
|
## What is it?
|
|
|
|
This is a toy implementation of an encrypted IPv6 network, with many good ideas stolen from [cjdns](https://github.com/cjdelisle/cjdns), which was written to test a particular routing scheme that I cobbled together one random Wednesday afternoon.
|
|
It's notably not a shortest path routing scheme, with the goal of scalable name-independent routing on dynamic networks with an internet-like topology.
|
|
It's named Yggdrasil after the world tree from Norse mythology, because that seemed like the obvious name given how it works.
|
|
For a longer, rambling version of this readme with more information, see: [doc](doc/README.md).
|
|
A very early incomplete draft of a [whitepaper](doc/Whitepaper.md) describing the protocol is also available.
|
|
|
|
This is a toy / proof-of-principle, so it's not even alpha quality software--any nontrivial update is likely to break backwards compatibility with no possibility for a clean upgrade path.
|
|
You're encouraged to play with it, but I strongly advise against using it for anything mission critical.
|
|
|
|
## Building
|
|
|
|
1. Install Go (tested on 1.9, I use [godeb](https://github.com/niemeyer/godeb)).
|
|
2. Clone this repository.
|
|
2. `./build`
|
|
|
|
Note that you can cross-compile for other platforms and architectures by specifying the `$GOOS` and `$GOARCH` environment variables, for example, `GOOS=windows ./build` or `GOOS=linux GOARCH=mipsle ./build`.
|
|
|
|
The build script sets its own `$GOPATH`, so the build environment is self-contained.
|
|
|
|
## Running
|
|
|
|
To run the program, you'll need permission to create a `tun` device and configure it using `ip`.
|
|
If you don't want to mess with capabilities for the `tun` device, then using `sudo` should work, with the usual security caveats about running a program as root.
|
|
|
|
To run with default settings:
|
|
|
|
1. `./yggdrasil --autoconf`
|
|
|
|
That will generate a new set of keys (and an IP address) each time the program is run.
|
|
The program will bind to all addresses on a random port and listen for incoming connections.
|
|
It will send announcements over IPv6 link-local multicast, and it will attempt to start a connection if it hears an announcement from another device.
|
|
|
|
In practice, you probably want to run this instead:
|
|
|
|
1. `./yggdrasil --genconf > conf.json`
|
|
2. `./yggdrasil --useconf < conf.json`
|
|
|
|
This keeps a persistent set of keys (and by extension, IP address) and gives you the option of editing the configuration file.
|
|
If you want to use it as an overlay network on top of e.g. the internet, then you can do so by adding the remote devices domain/address and port (as a string, e.g. `"1.2.3.4:5678"`) to the list of `Peers` in the configuration file.
|
|
|
|
### Platforms
|
|
|
|
#### Linux
|
|
|
|
- Should work out of the box on most Linux distributions with `iproute2` installed.
|
|
|
|
#### macOS
|
|
|
|
- Tested and working out of the box on macOS 10.13 High Sierra.
|
|
- May work in theory on any macOS version with `utun` support (which was added in macOS 10.7 Lion), although this is untested at present.
|
|
|
|
#### Windows
|
|
|
|
- Tested and working on Windows 7 and Windows 10, and should work on any recent versions of Windows, but it depends on the [OpenVPN TAP driver](https://openvpn.net/index.php/open-source/downloads.html) being installed first.
|
|
- Has been proven to work with both the [NDIS 5](https://swupdate.openvpn.org/community/releases/tap-windows-9.9.2_3.exe) (`tap-windows-9.9.2_3`) driver and the [NDIS 6](https://swupdate.openvpn.org/community/releases/tap-windows-9.21.2.exe) (`tap-windows-9.21.2`) driver, however there are substantial performance issues with the NDIS 6 driver therefore it is recommended to use the NDIS 5 driver instead.
|
|
- Be aware that connectivity issues can occur on Windows if multiple IPv6 addresses from the `fd00::/8` prefix are assigned to the TAP interface. If this happens, then you may need to manually remove the old/unused addresses from the interface (though the code has a workaround in place to do this automatically in some cases).
|
|
|
|
#### EdgeRouter
|
|
|
|
- Tested and working on the EdgeRouter X, using the [vyatta-yggdrasil](https://github.com/neilalexander/vyatta-yggdrasil) wrapper package.
|
|
|
|
## Optional: advertise a prefix locally
|
|
|
|
Suppose a node has generated the address: `fd00:1111:2222:3333:4444:5555:6666:7777`
|
|
|
|
Then the node may also use addresses from the prefix: `fd80:1111:2222:3333::/64` (note the `fd00` changed to `fd80`, a separate `/9` is used for prefixes, but the rest of the first 64 bits are the same).
|
|
|
|
To advertise this prefix and a route to `fd00::/8`, the following seems to work for me:
|
|
|
|
1. Enable IPv6 forwarding (e.g. `sysctl -w net.ipv6.conf.all.forwarding=1` or add it to sysctl.conf).
|
|
|
|
2. `ip addr add fd80:1111:2222:3333::1/64 dev eth0` or similar, to assign an address for the router to use in that prefix, where the LAN is reachable through `eth0`.
|
|
|
|
3. Install/run `radvd` with something like the following in `/etc/radvd.conf`:
|
|
```
|
|
interface eth0
|
|
{
|
|
AdvSendAdvert on;
|
|
prefix fd80:1111:2222:3333::/64 {
|
|
AdvOnLink on;
|
|
AdvAutonomous on;
|
|
};
|
|
route fd00::/8 {};
|
|
};
|
|
```
|
|
|
|
This is enough to give unsupported devices on my LAN access to the network, with a few security and performance cautions outlined in the [doc](doc/README.md) file.
|
|
|
|
## How does it work?
|
|
|
|
I'd rather not try to explain in the readme, but I describe it further in the [doc](doc/README.md) file or the very draft of a [whitepaper](doc/Whitepaper.md), so you can check there if you're interested.
|
|
Be warned that it's still not a very good explanation, but it at least gives a high-level overview and links to some relevant work by other people.
|
|
|
|
## Obligatory performance propaganda
|
|
|
|
A [simplified model](misc/sim/treesim-forward.py) of this routing scheme has been tested in simulation on the 9204-node [skitter](https://www.caida.org/tools/measurement/skitter/) network topology dataset from [caida](https://www.caida.org/), and compared with results in [arxiv:0708.2309](https://arxiv.org/abs/0708.2309).
|
|
Using the routing scheme as implemented in this code, I observe an average multiplicative stretch of 1.08, with an average routing table size of 6 for a name-dependent scheme, and approximately 30 additional (but smaller) entries needed for the name-independent routing table.
|
|
The number of name-dependent routing table entries needed is proportional to node degree, so that 6 is the mean of a distribution with a long tail, but I believe this is an acceptable tradeoff.
|
|
The size of name-dependent routing table entries is relatively large, due to cryptographic signatures associated with routing table updates, but in the absence of cryptographic overhead I believe each entry is otherwise comparable to the BC routing scheme described in the above paper.
|
|
A modified version of this scheme, with the same resource requirements, achieves a multiplicative stretch of 1.02, which drops to 1.01 if source routing is used.
|
|
Both of these optimizations are not present in the current implementation, as the former depends on network state information that I haven't found a way to cryptographically secure, and the latter optimization is both tedious to implement and would make debugging other aspects of the implementation more difficult.
|
|
|
|
## License
|
|
|
|
This code is released under the terms of the LGPLv3, but with an added exception that was shamelessly taken from [godeb](https://github.com/niemeyer/godeb).
|
|
Under certain circumstances, this exception permits distribution of binaries that are (statically or dynamically) linked with this code, without requiring the distribution of Minimal Corresponding Source or Minimal Application Code.
|
|
For more details, see: [LICENSE](LICENSE).
|
|
|