furrtek
dc5d6fef70
Started work on ACARS RX
...
Added ACARS frequencies file
Moved non-implemented apps menu items down
2018-06-10 10:15:43 +01:00
furrtek
5c1ba9b90d
Added cursor to audio spectrum view
2018-05-22 04:43:04 +01:00
furrtek
b813b32593
Added an audio FFT view in Wideband FM receive
...
Tried speeding up fill_rectangle for clearing the waveform widget
2018-05-21 18:46:48 +01:00
furrtek
b11c3c94b6
Added tone key mix ratio in Settings -> Audio
...
Renamed Setup to Settings
Updated binary
2018-05-16 09:45:13 +01:00
furrtek
b29c1d9749
Finally found what was eating all the RAM :D
...
Re-enabled the tone key selector in Soundboard
Soundboard now uses OutputStream, like Replay
Constexpr'd a bunch of consts which were going to BSS section
Exiting an app now goes back to main menu
Cleaned up Message array
2018-05-15 23:35:30 +01:00
furrtek
8573f760be
Added basic APRS transmit
...
Added goertzel algo
Updated binary
2018-02-23 20:21:24 +00:00
furrtek
7fd987a2b4
Added support for multiple sample rates in IQ record
...
Support for any sample rate <= 500k in IQ replay
Fixed bias-t power not activating in TX
Removed RSSI pitch output option (awful code)
Udated binary
2018-02-22 07:04:19 +00:00
RndmNmbr
36e5682406
Update ui_widget.hpp
...
Added include of <functional> to allow for a clean build with g++ 7.2.1 20170904
2018-02-03 13:41:40 -05:00
furrtek
57c759627d
Fixed mic tx not working the first time it was entered
...
Fixed SD card FAT wipe (buffer size too big)
Cleared some warnings from ADSB rx
Updated binary
2018-02-01 11:17:51 +00:00
furrtek
441a266dc4
Added back scanning in BHT TX
...
Added file creation date display in File Manager
2018-01-09 21:12:19 +00:00
furrtek
f0c912be2e
Added Bias-T toggle confirmation
...
Backlight setting save bugfix
Updated binary
2018-01-08 03:47:37 +00:00
furrtek
3193c6ee99
Added bias-T status icon
...
Merged radio settings in one screen
2018-01-07 23:13:08 +00:00
furrtek
c9381f1418
Added loop option in Replay app
...
Updated binary
2017-12-11 04:14:54 +00:00
furrtek
3d2dacaf29
Added range file and range type to frequency manager (mainly for jammer)
...
Made MenuView use less widgets, hopefully preventing crashes with large
lists
Fixed M10 sonde crash on packet receive
Updated about screen
Updated binary
2017-12-08 18:58:46 +00:00
furrtek
b38adf3769
Replay of IQ files ! :D
...
Added icons and colors for commonly used files in Fileman
Fileman can filter by file extension
Bugfix: Fileman doesn't crash anymore on renaming long file names
Updated binary
2017-12-07 00:58:25 +00:00
furrtek
3221992ad1
Added back frequency display for CTCSS
...
Attempted to fix replay, just fixed StreamBuffer read() and added
waterfall display...
Updated binary
2017-12-06 13:20:51 +00:00
furrtek
d77337dd77
Added CTCSS decoder in NFM RX
...
RSSI output is now pitch instead of PWM
Disabled RSSI output in WBFM mode
2017-11-28 08:52:04 +01:00
furrtek
dc82f15ece
Started adding decoders for RS41 radiosondes
...
Hopefully fixed M2K2 radiosonde battery voltage decoding
Updated binary
2017-11-10 02:20:44 +00:00
furrtek
1b93dd53e8
Tone generator class
2017-11-10 00:25:04 +00:00
furrtek
4465cfb905
Added tone keys for some wireless mic brands
...
Renamed CTCSS stuff to Tone key
Changed PTT key in mic TX (was left, now right) to allow easier exit
Mic samplerate bumped to 48kHz
Updated binary
2017-11-09 20:02:34 +00:00
furrtek
196518457f
Fixed freeze in TouchTunes scan
...
Made adsb_map.py compatible with Python 3
2017-11-08 21:08:46 +01:00
furrtek
17b238f3a8
Added "test app" as a draft zone for... stuff
...
Added second signature for M2K2 radiosonde
2017-10-30 02:00:39 +01:00
furrtek
d4207cde7b
Merge branch 'master' of https://github.com/furrtek/portapack-havoc
2017-10-28 19:29:09 +02:00
Furrtek
046d1c7c15
Updated ui_widget.cpp
2017-10-28 19:27:18 +02:00
furrtek
6ff8249a4f
Added logging, serial number and battery voltage display to radiosonde RX
...
Added decimal degrees display to geopos widget
2017-10-28 19:16:06 +02:00
furrtek
d47f292d3a
Radiosonde RX now understands Meteomodem's M10 correctly
...
Updated binary
2017-10-27 18:54:50 +02:00
furrtek
6e7b2c751f
Added wav file viewer
...
Fileman open now allows going into subdirectories
Updated binary
2017-10-15 15:53:40 +01:00
furrtek
40a71d32a2
Added keyfob UI and debug functions
...
Fixed hex display truncated to 32 bits instead of 64
Updated binary
2017-10-14 16:30:49 +01:00
furrtek
d3222c27ca
Started working on radiosonde RX
...
Removed some warnings
Better handling of absent map file in GeoMap ?
2017-10-05 05:38:45 +01:00
furrtek
73d47cd77d
Added remaining buttons for TouchTunes remote
...
LCR transmit UI cleanup
CC1101 data whitening function
Uniformized tx progress message handling
2017-09-24 20:05:42 +01:00
furrtek
26949773bb
Added TouchTunes remote
2017-09-23 12:02:32 +01:00
furrtek
9acfdcbd41
Added function setting in POCSAG TX
...
POCSAG TX: Max message length is now 30 (was 16 for no reason)
2017-09-23 04:53:42 +01:00
furrtek
a6d2b766f4
Fixed EPAR transmit
2017-09-21 09:18:17 +01:00
furrtek
c0f51c2690
Date and time display widget
...
Disabled handwriting text input (not that useful for now)
Bugfix: Trim long filenames in fileman
Slight cleanup of 7-seg display widget
2017-09-20 07:50:59 +01:00
furrtek
950bc2b1d2
AFSK RX works (only Bell202 for now)
...
AFSK RX always logs to file
Removed frequency and bw settings from modem setup view
Updated binary
Bugfix: Binary display shifted one bit
Bugfix: Frequency manager views freezing if SD card not present
Bugfix: Menuview blinking arrow not showing up at the right position
Bugfix: Freeze if console written to while it's hidden
Broken: LCR TX, needs UI update
2017-09-02 08:28:29 +01:00
furrtek
42439d1885
Started writing (copying...) AFSK RX
...
Encoders: removed bit duration setting (frame duration is more useful)
2017-08-29 09:42:04 +01:00
furrtek
3aae333974
ADSB RX text color bugfix
...
ADSB RX entries now "age" after 10 and 20 seconds
2017-08-27 21:03:17 +01:00
furrtek
2628f9c03d
ADSB position decoding
...
Date and time string format function
Binary update
2017-08-17 12:56:47 +01:00
furrtek
9d902bc224
ADSB RX now works \o/
...
Added tabs in RDS TX, multiple groups can be sent at once
Bugfix: text not updating on UI after text prompt
2017-08-16 10:02:57 +01:00
furrtek
7f97a090e4
Fixed ADSB TX frame rotation
2017-08-12 09:54:58 +01:00
furrtek
e5fef6bb89
Added tabs to BHT TX and Jammer
...
Updated firmware binary
2017-08-12 00:27:05 +01:00
Jared Boone
f726a54f25
Fix whitespace to match furrtek/portapack-havoc.
2017-08-09 17:08:30 -07:00
Jared Boone
39617f38bf
TPMS: Remove unused variable.
...
May use again, so commented out.
2017-08-08 10:36:17 -07:00
Jared Boone
58e0432b56
I2S: Enable input buffer on SCK for LPC43xx slave mode.
2017-08-06 12:44:27 -07:00
Jared Boone
ac423ee769
Audio: Add codec config methods for external I2S master.
2017-08-06 12:43:39 -07:00
Jared Boone
6c3a1384fb
WM8731: Extract interface configuration method.
2017-08-06 12:08:12 -07:00
Jared Boone
f0947a4917
AK4951: Separate/rename codec interface mode config methods.
2017-08-06 12:02:38 -07:00
Jared Boone
49252dc1bc
LPC43xx: Add CREG6 struct definition. Add I2S CREG6 configuration.
2017-08-06 11:16:57 -07:00
furrtek
fba5b507ad
Made a GeoPos widget for lon/lat/alt entry and display (APRS...)
...
Cleaned up the GeoMap view, can be used as input
2017-08-03 19:06:59 +01:00
furrtek
a5f0f72ea1
Split ADSB TX into tabs
...
Simplified TabView a lot
2017-07-30 14:46:42 +01:00
furrtek
89a3afcd74
Started writing TabView
...
Loopable NumberField
2017-07-30 09:39:01 +01:00
furrtek
0cbf9cd386
Added velocity/bearing ADS-B frame for tx
...
Added compass widget
Manchester encoder
2017-07-25 08:30:12 +01:00
furrtek
c2a9ed7d9b
Merge remote-tracking branch 'upstream/master'
2017-07-25 00:20:57 +01:00
furrtek
5a67a7080a
ADS-B TX works well enough for dump1090 and gr-air-modes
...
Hooked ADS-B RX to baseband instead of debug IQ file, not tested
2017-07-23 12:20:32 +01:00
Jared Boone
e9895c1b11
IO: Enable input buffer on LCD_WRX.
...
Just for consistency. Other LCD interface pin states are read during interrupt.
2017-07-20 16:37:48 -07:00
Jared Boone
751ae92509
CPLD: Switch sense of LCD_RD/WR pins.
...
Should keep CPLD settled when in HackRF mode.
2017-07-20 16:33:55 -07:00
Jared Boone
aa189a3462
Backlight: Add abstraction for support of different hardware.
2017-07-18 21:29:32 -07:00
Jared Boone
1eb561ab45
LCD: Rename lcd_write_data_fast to lcd_write_data.
...
It's the only LCD write function!
2017-07-18 13:27:15 -07:00
Jared Boone
aa66c0b7f7
LCD: Consolidate read functions.
...
Faster function consumed by slower function, because faster function was failing during testing.
2017-07-18 13:23:16 -07:00
Jared Boone
2064689d46
IO: Remove out-of-date comment.
2017-07-18 13:17:10 -07:00
Jared Boone
030a0bcb0c
IO: Add LCD write function for C arrays.
2017-07-18 13:16:41 -07:00
Jared Boone
bb194825ae
ILI9341: Refactor sleep on/off, display on/off functions.
2017-07-18 13:13:13 -07:00
furrtek
58f113d153
"CW generator" and "Whistle" merged in "Signal generator"
...
Added wave shape selection and tone frequency auto-update
Converted color icons to B&W
2017-07-18 19:31:05 +01:00
Jared Boone
23c340abb2
MAX V: Add shift_dr() for testing.
2017-07-18 10:53:43 -07:00
Jared Boone
963579d82a
AK4951: Adjust initial microphone gain.
2017-07-18 10:53:08 -07:00
Jared Boone
62b1a82b6b
Doc: Fix incorrect comment about MCU->CPLD pin functions.
2017-07-17 16:41:02 -07:00
Jared Boone
1b9a569022
SDC: Adjust clock/data timing and output drive to match SD specs, measurements.
2017-07-17 16:38:31 -07:00
furrtek
33a2df9d2a
OutputStream (file M0 -> M4 radio) now works
...
Disabled numbers station for now (too buggy, low priority)
2017-06-23 08:40:22 +01:00
furrtek
abd154b3c7
Merge remote-tracking branch 'upstream/master'
...
Base class for text entry
2017-06-21 03:25:27 +01:00
Jared Boone
47cc88d1e1
ILI9341: Tidy scroll types, use height().
2017-06-19 16:31:54 -07:00
furrtek
e2f0a03460
Using new CPLD data (fixes spectrum mirroring)
...
Scanner bugfix for wide ranges
Added squelch parameter for NFM receiver
Adjustment to Vumeter widget rendering
2017-06-11 09:50:29 +01:00
Jared Boone
dec4e41189
CPLD: Organize CPLD code into namespaces.
...
Use type aliases to hide actual CPLD type (somewhat).
2017-06-02 21:57:13 -07:00
Jared Boone
dd0c009e6f
CPLD: Stop generating HackRF CPLD .hpp file.
2017-06-02 21:55:35 -07:00
Jared Boone
3d06941129
Move CPLD filres to common/
...
...for imminent refactoring.
2017-06-02 17:13:41 -07:00
Jared Boone
a3483a8394
CPLD: Introduce Config type to clean up programming interface.
...
Hide the details of how the CPLD data is stored.
2017-06-02 16:54:24 -07:00
Jared Boone
797e63a590
CPLD: Use correct bitstream for updating hardware.
...
Determine hardware version and use one of two CPLD bitstream files.
2017-05-31 22:28:07 -07:00
Jared Boone
600dcb734e
AK4951: Initial commit.
2017-05-31 11:45:54 -07:00
Jared Boone
bec626e29f
WM8731: Add Codec abstraction.
2017-05-31 11:42:12 -07:00
Jared Boone
37c058354e
WM8731: Add method to detect codec is present.
...
Used to determine PortaPack hardware version.
2017-05-31 11:34:16 -07:00
Jared Boone
8f5555b052
WM8731: Store headphone volume for mute() function.
...
So when unmuted, previous volume can be restored.
2017-05-31 11:32:32 -07:00
Jared Boone
f6e1e78e8a
WM8731: Return bool from reset() and low-level write()s.
2017-05-31 11:28:00 -07:00
Jared Boone
b3ee884f16
I2S RX: Set RX SDA pin to correct SCUMUX mode.
...
It's left in GPIO mode ordinarily, because of CPLD programming earlier in boot-up.
2017-05-26 16:50:34 -07:00
Jared Boone
556085b3e3
I2S: Enable TX_WS output pin's input buffer.
...
This permits receipt of TX_WS as RX_WS for the receive side of the I2S peripheral, and was why I got no RX samples when testing microphone input.
2017-05-22 14:20:49 -07:00
furrtek
a35d9ee8a9
Missing image files
2017-05-18 21:56:55 +01:00
furrtek
38e14b1e30
Scanner: Added last locked frequencies list
...
Added back squelch to NFM receiver
Scanner: cleanup
Widgets: VU-meter cleanup
2017-05-18 11:06:11 +01:00
Jared Boone
dd0048db8d
Remove broken simd32_t type.
2017-05-03 09:58:07 +01:00
Jared Boone
19e42196db
Fn for control of audio codec reset signal.
2017-05-01 10:37:49 +01:00
Jared Boone
b12f90ef08
Adjust initial CPLD io_reg value for new CPLD code.
2017-05-01 10:34:33 +01:00
furrtek
8c680ff893
Simplified LCR code a bit
...
Split modem into modem and serializer
Frequency string formatter
2017-04-24 18:15:57 +01:00
furrtek
90feadd9f5
POCSAG RX saves ignored address
...
Made AFSK code more generic (not tied to LCR)
Added modem presets and more options in AFSK setup
String-ized and simplified LCR UI code
Simplified AFSK baseband code, made to always work on 16bit words
2017-04-21 06:22:31 +01:00
furrtek
eff96276c3
Made back button always focusable with left key
2017-04-21 00:31:21 +01:00
furrtek
40b49e2072
POCSAG address filter now ignores alpha messages
...
Experimenting with FIFOs for replay...
2017-04-19 22:05:16 +01:00
furrtek
3a1e5b8772
Added address filter in POCSAG RX
...
Changed POCSAG log format
Console widget knows red, green and blue now
2017-04-18 21:29:55 +01:00
furrtek
fbc054ca75
Coaster pager address scan
...
Merged tone setups
2017-04-11 08:42:31 +01:00
furrtek
685e4c6e4b
Added more SSTV modes
...
A bit more work done on Replay (still not enabled)
2017-03-23 21:28:21 +00:00
furrtek
6a0bcb9cca
SSTV transmit beta (320x256 24bpp Scottie 2 only)
2017-03-23 04:29:58 +00:00
furrtek
5b74b83458
Bitmap preview in SSTV TX
2017-03-22 18:21:31 +00:00
furrtek
089eeeafe4
Tones bugfix, numbers station voice files search
2017-03-22 03:21:06 +00:00
furrtek
16acb9db28
Added roger beep option in mic TX
2017-03-14 08:20:13 +00:00
furrtek
37cfcd392d
Added DCS parity table and generator tool
2017-03-14 07:24:04 +00:00
furrtek
69b0ef9a40
Microphone tx is mostly working, Voice activation, PTT, CTCSS...
...
Transmit bandwidth bugfix
TX LED is now only lit when using rf amp
VU-meter widget
Added gain parameter for baseband audio TX
2017-03-13 04:09:21 +00:00
furrtek
2d75722b74
Added microphone TX (very basic for now)
2017-03-12 07:10:09 +00:00
furrtek
446efa8fc0
Reduced audio tx FIFO refill size
...
Last received POCSAG address is auto loaded in POCSAG tx
2017-03-05 15:37:56 +00:00
furrtek
2022fe137c
Morse TX bugfix: bad CW symbols, FM not stopping
...
Corrected fox hunt transmitter #s
Moved widgets a bit
Setting up proc_tones with 0 message length stops it
2017-03-03 08:06:11 +00:00
furrtek
0ba05fea5e
Morse special chars and tx duration indication
2017-02-15 04:27:51 +00:00
furrtek
0642c57041
Utility: CW generator
2017-02-15 03:05:38 +00:00
furrtek
6c86ad1b72
Morse TX foxhunt codes are working
2017-02-13 23:24:42 +00:00
furrtek
4e8980e5d8
Finished jammer modes
...
Shaved off a few kBs by using the Labels widget
2017-02-13 05:35:13 +00:00
furrtek
d12cd0d8af
"Labels" widget
2017-02-12 07:23:31 +00:00
furrtek
0102a34286
Reverted WFM mode to working state
...
TXView in ADSB TX
Lockable TXView
POCSAG TX bugfix with Alphanum and Numeric only
Testing Labels widget
2017-02-12 04:05:21 +00:00
furrtek
21de81bb85
POCSAG TX: Support for numeric only and address only messages
2017-02-08 01:19:29 +00:00
furrtek
fc8279aa30
POCSAG TX text and bitrate can be changed
...
Modal view message can be multiline now
2017-02-07 19:54:18 +00:00
furrtek
dc7fcbc6c3
POCSAG TX (with fixed message for testing)
2017-02-07 17:48:17 +00:00
furrtek
24abe4b427
Yet another POCSAG bugfix (multi-batch messages are not cut anymore)
...
Added BCH ECC functions for checking, error correction and encoding
2017-02-06 20:32:33 +00:00
furrtek
98f89a84bb
Improved POCSAG receiver reliability
2017-02-05 20:57:20 +00:00
furrtek
607e6c5bd4
CTCSS in soundboard. 24 jammer chs instead of 9.
...
Soundboard random mode now cares about loop option.
Started documenting UI.
2017-02-02 09:29:14 +00:00
furrtek
8662ed4024
Close Call should be more accurate
...
Merged close call and wideband spectrum baseband processors
2017-02-01 08:53:26 +00:00
furrtek
064e097bc3
Symfield widget auto-inits
...
ADS-B emergency frame
2017-02-01 00:21:13 +00:00
furrtek
0642d633c3
Frequency manager empty file bugfix
2017-01-30 01:09:00 +00:00
furrtek
f0fbc356ad
Jammer bugfix: now produces all the right channels
2017-01-17 14:27:37 +00:00
furrtek
7cb38f858e
Udpdated jammer baseband code, should work again
2017-01-17 08:42:35 +00:00
furrtek
368f0f7fb0
Digital mode for waveform widget, 2.4GHZ WLAN channels in jammer
2017-01-17 07:00:42 +00:00
furrtek
b10c88e271
POCSAG bitrate selection and logging toggle
...
Small checkboxes
2017-01-16 13:36:28 +00:00
furrtek
e4abcea9a3
Added bitrate option for POCSAG baseband, PWMRSSI frequency option
...
Split SD card wiper app
Cleanup for -Weffc++
2017-01-16 08:40:17 +00:00
furrtek
5e40669cbc
Merge 'upstream/master' - At least it builds...
2017-01-16 03:45:44 +00:00
furrtek
12aeae3a82
Commit replay stuff before sync
2017-01-10 19:45:40 +00:00
furrtek
3ec725c172
Added SD card wiper tool
...
Frequency manager now creates FREQMAN.TXT if not found
Moved graphics files
2017-01-10 18:40:33 +00:00
furrtek
a0c248d567
Added waveform widget and a frequency field in encoders tx
2017-01-09 02:45:29 +00:00
Jared Boone
05eb694c0a
Introduce simd32_t type.
...
Discontinue use of disagreeable __SIMD #define.
2017-01-06 16:57:36 -08:00
Jared Boone
177d49b769
GPIO: Fix for incorrect pin-funciton bit mask.
...
Caused device to not boot. Oops.
2017-01-06 14:22:27 -08:00
Jared Boone
87383d735c
C++14: Decommission my own make_unique.
2017-01-05 17:14:07 -08:00
Jared Boone
0d1e48ae9c
C++14: Add two-argument delete() implementations.
...
Just passing to one-argument versions.
2017-01-05 17:13:03 -08:00
Jared Boone
a22dc150bc
C++14: make some wrapper classes static.
...
Also address GCC 6.2 not allowing constexpr from reinterpret_cast<> values.
2017-01-05 17:10:00 -08:00
Jared Boone
0ea2f9650e
C++14: const all the methods!
2017-01-05 17:06:44 -08:00
furrtek
f033782d4b
Playdead default sequence and validity check
2016-12-26 13:49:23 +01:00
furrtek
7df5987b3b
Added utilities > Frequency manager + load/save
2016-12-26 01:31:38 +01:00
furrtek
6bcb7dc1b1
# This is a combination of 2 commits.
...
# The first commit's message is:
Updated RDS transmitter: flags, PI and date/time
Merging baseband audio tone generators
Merging DTMF baseband with "tones" baseband
Added stealth transmit mode
App flash section bumped to 512k
RX and TX LEDs are now used
Play dead should work again, added login option
Morse frame gen. for letters and fox hunt codes
Merged EPAR with Xylos
Made EPAR use encoders for frame gen.
Moved OOK encoders data in encoders.hpp
Simplified about screen, ui_about_demo.* files are still there
BHT city DB, keywords removed
BHT cities DB, keywords removed
Update README.md
RDS radiotext and time group generators
# This is the 2nd commit message:
Update README.md
2016-12-24 11:52:11 +01:00
furrtek
75e8a664b0
3D buttons, to make UI clearer
2016-12-23 18:31:03 +01:00
furrtek
28ea2179f4
Re-enabled closecall even if it's still not working well
...
RDS PSN works again but update issue (UI ?)
Moved CTCSS stuff to dedicated file
2016-12-23 18:31:02 +01:00
furrtek
1db138c27a
Wavfile class
2016-12-23 18:31:02 +01:00
furrtek
e56fa0f479
Numbers station works, very basic
...
Added utilities, whip antenna length calculator
Modal errors/abort
2016-12-23 18:31:02 +01:00
furrtek
d18b6d135d
Restoring jammer and RDS functionalities, please wait...
...
Started work on frequency manager and numbers station simulator
2016-12-23 18:31:01 +01:00
furrtek
ef0feae62b
Started work on ADS-B TX baseband processor
2016-12-23 18:31:01 +01:00
Jared Boone
01cd8c7776
GPIO: Fix PinConfig -> uint16_t type conversion signature.
2016-12-21 22:24:07 -08:00
Jared Boone
ad9a63a666
GPIO: Fix apparent dumb bit-logic bug.
...
Not due to any observable incorrect behavior, but just noticing that the code, as previously written, should not work...
2016-12-21 22:20:28 -08:00
Jared Boone
f2dd6827ea
Add Widget::parent_rect() accessor, rename member variable.
...
Some day I will settle on a convention for naming members... I think that day is near.
2016-12-06 09:28:48 -08:00
furrtek
bb6eefe2be
Started ADS-B TX UI and frame encoding
2016-11-30 07:41:55 +01:00
Jared Boone
3f94591083
Remove a lot of static_cast<>s involving UI structs.
...
Also starting to get religion on using unsigned integers only when I want their wrapping/modulus behavior.
2016-11-29 10:13:56 -08:00
Jared Boone
227719ff1d
Fix static_cast warning.
2016-11-28 12:05:24 -08:00
Jared Boone
e820bed097
Hide ui::Rect implementation.
2016-11-28 11:25:27 -08:00
Jared Boone
d15ace4676
Hide ui::Size implementation.
2016-11-28 10:55:45 -08:00
Jared Boone
aac2d31548
Hide ui::Point implementation.
2016-11-28 10:39:10 -08:00
Jared Boone
46b3d9d087
Disallow copy constructors/assignments.
...
For classes containing pointers/state that should not be copied.
2016-11-26 16:52:57 -08:00
Jared Boone
4eb0facacb
Add lots of value constructors.
2016-11-26 16:50:44 -08:00
Jared Boone
cd31ae86d7
Add single-arg constructor for vec2_s16.
2016-11-26 16:42:03 -08:00
Jared Boone
a33476259e
Create buffer.cpp, reduce #include dependencies and impl leakage.
2016-10-24 11:16:48 -07:00
Jared Boone
5dfb53263a
Extract BufferExchange, simplify threading.
2016-10-06 13:38:56 -07:00
Jared Boone
414dd41577
Allow modification of StreamBuffer (data values, size).
2016-10-04 09:15:19 -07:00
furrtek
8c70ef08f8
Fixed xx2262 remote encoder def
...
SymField now shows symbol chars
2016-09-27 03:06:14 +02:00
furrtek
8276e5e311
Added CTCSS in Soundboard
2016-09-23 23:08:54 +02:00
furrtek
bb29efeda6
Added Nuoptix DTMF sync transmit (Disney parades, light shows...)
...
Soundboard ignores stereo files
2016-09-23 17:34:50 +02:00
Jared Boone
df0fc30fda
Rect: Comment about a bad API method.
...
In retrospect, I don't like Rect + Rect = union -- it doesn't make as much sense and isn't as readable as Rect.union(Rect).
2016-09-07 22:19:30 -07:00
Jared Boone
f722497b01
Rect: operator method to offset by a Point.
2016-09-07 22:18:11 -07:00
Jared Boone
09222f0044
Widget/View: Consolidate dirty code inside Widget.
2016-09-05 15:04:28 -07:00
Jared Boone
8a69b0523e
View::add_children: Use std::list_initializer as argument.
...
Improvement in code size -- 944 bytes.
Some day I will understand C++11 well enough to do the right thing the first time.
2016-09-05 14:53:04 -07:00
Jared Boone
5d2ad9c1aa
SGPIO: Use pin constants when changing output enables.
2016-08-30 21:33:44 -07:00
Jared Boone
00c7cdf027
CPLD: Always clock SGPIO data on external clock rising edge.
2016-08-30 21:30:03 -07:00
Jared Boone
f0c4b0fc98
AIS: Doesn't use RRC filter -- use rect instead.
2016-08-29 20:47:37 -07:00
furrtek
808f99647e
Soundboard: Arbitrary samplerate support for wave files
...
Screenshots
2016-08-26 09:54:17 +02:00
furrtek
f7e0f36bd9
Added Soundboard
...
file.cpp: scan_root_files
proc_audiotx.cpp: bandwidth setting
ui_widget.cpp: button on_focus
2016-08-26 08:11:24 +02:00
furrtek
5de6349199
Bitrate and flags for POCSAG packets, trim bugfix
2016-08-25 16:20:19 +02:00
furrtek
04cdafe387
Bugfix: POCSAG alphanum messages not showing
...
Bugfix: Range limit for afsk config
2016-08-24 14:44:57 +02:00
Jared Boone
e2fe4b65d9
CPLD: Set DECIM1 as input to CPLD.
...
How did DECIM work before?! Now, decimate is no longer a feature, so this doesn't really matter. But tidying it up anyway.
2016-08-23 10:30:05 -07:00
furrtek
02f0271553
Added basic POCSAG receiver
...
Added Yes/no modal screen (for future tx warnings)
2016-08-23 08:45:33 +02:00
Jared Boone
f7bfde73b6
FatFs: Enable long file name support.
...
Lots of re-plumbing to make this work, including a bunch of Unicode stuff now in the binary. Bloat City, I'm sure.
TODO: FatFs using unsigned (uint16_t) for UTF16 representation is kinda inconvenient. Lots of reinterpret_cast<>().
2016-08-21 18:06:39 -07:00
Jared Boone
77016b9a40
Rename CPLD "Q_INVERT" to signal to "INVERT".
...
Don't expose detail in name about how the task is accomplished.
2016-08-21 11:35:40 -07:00
Jared Boone
b0a3f680e5
CPLD: Remove decimation feature.
2016-08-21 11:31:37 -07:00
furrtek
c2fbc0c8d5
AudioTX, fixed about screen and an LCR address list bug
2016-08-17 04:17:24 +02:00
furrtek
45a754645e
Merge remote-tracking branch 'upstream/master'
...
# Conflicts:
# firmware/application/bitmap.hpp
# firmware/application/receiver_model.cpp
# firmware/application/receiver_model.hpp
# firmware/application/touch.hpp
# firmware/application/ui_setup.cpp
# firmware/baseband/proc_ais.hpp
# firmware/baseband/proc_ert.hpp
# firmware/bootstrap/CMakeLists.txt
# firmware/common/portapack_persistent_memory.cpp
# firmware/common/portapack_persistent_memory.hpp
2016-08-17 02:55:34 +02:00
Jared Boone
52c089c4df
SGPIO: Hi-Z data bus before setting direction pin.
...
Another tactic to avoid bus contention, however brief.
2016-08-13 16:46:02 -07:00
Jared Boone
62d2ae2336
SGPIO: Change bus direction more deliberately.
...
There may have been an instant where the CPLD and SGPIO were driving the bus simultaneously, when switching from TX to RX.
2016-08-13 16:42:39 -07:00
furrtek
38e506a108
OOK transmit is mostly working, bit durations are wrong
...
Simplified messages carrying data (uses shared_memory instead)
Added SymField widget (bitfield, symbol field...)
Added some space for baseband code
BMP palette loading bugfix
2016-08-06 08:49:45 +02:00
furrtek
787f656500
Testing OOK TX baseband module
2016-08-03 08:53:50 +02:00
furrtek
1b44b22419
Wrote most of the Encoders TX app (lacks baseband module)
...
Fixed menu scroll glitch
Added set_range to NumberField widget
2016-08-03 04:53:51 +02:00
furrtek
e2218a0f32
More AFSK options, scan lists,
2016-08-02 12:44:31 +02:00
furrtek
72f3c08e9b
Added raw ASCII char field in keyboard view
2016-08-01 20:06:17 +02:00
furrtek
c58039e557
Fixed LCR scan and alt format, console widget, text input autotrim
2016-07-29 04:52:51 +02:00
furrtek
1d697d2201
Added PWM RSSI output for NBFM and WFM
2016-07-28 05:25:33 +02:00
Jared Boone
c424bf08f3
Touch: Migrate touch calibration to persistent memory.
2016-07-27 15:30:43 -07:00
furrtek
1beac3bdbd
Added repeat setting for AFSK TX, fixed LCR scan, cleaned up LCR
...
Added max setting for progressbars, default = 100
2016-07-28 00:08:05 +02:00
Jared Boone
82f6e7c306
Change default frequency when NVRAM is initialized.
2016-07-27 14:17:57 -07:00
furrtek
e958b4bd7d
Fixed LCR transmit and AFSK baseband module
2016-07-27 21:26:03 +02:00
furrtek
79f2134d91
Cleaned up Xylos TX, J/N works again
2016-07-27 05:54:55 +02:00
furrtek
739956b42b
Sync with Sharebrained's fw, only Xylos TX works for now
2016-07-27 03:03:40 +02:00
Jared Boone
20bcbf511e
Move thread_base.hpp from baseband/ to common/.
...
I want to use it with M0 code as well.
2016-07-26 10:22:10 -07:00
furrtek
fdfa7c9776
Merge remote-tracking branch 'upstream/master'
...
Conflicts:
firmware/Makefile
firmware/application/Makefile
firmware/application/event_m0.cpp
firmware/application/ui_setup.cpp
firmware/application/ui_setup.hpp
firmware/baseband/baseband_thread.cpp
firmware/baseband/baseband_thread.hpp
firmware/bootstrap/CMakeLists.txt
firmware/common/message.hpp
firmware/common/portapack_shared_memory.hpp
hardware/.gitignore
2016-07-25 16:35:42 +02:00
furrtek
966a758a0b
Added frequency manager skeleton, LCR alt encoding, GPS jammer
2016-07-25 16:21:27 +02:00
Jared Boone
8b02e40602
Move touch ADC data collection to M0.
...
...so it continues when M4 is shut down.
It's not as pretty as using DMA, but it's far simpler, even if it involves letting the ADC run continuously and taking the last samples even if not synchronizing to the phase of the sampling of the channels.
2016-07-24 15:31:53 -07:00
Jared Boone
b3f4ea8978
Clean up SharedMemory placement new.
2016-07-24 15:27:05 -07:00
Jared Boone
49d6cda731
Move BasebandConfiguration to receiver_model.hpp.
...
That's the only place it's being used now -- it's no longer moving between cores.
2016-07-19 17:11:32 -07:00
Jared Boone
74b5571e8b
Remove baseband::start()/stop() and related message.
2016-07-19 17:06:22 -07:00
Jared Boone
4b7fa9f411
CPLD: Add XC2C64A method to init from EEPROM contents.
2016-07-18 11:31:21 -07:00
Jared Boone
4cc356f325
JTAG: Code to manage HackRF CPLD interactions.
2016-07-17 15:45:00 -07:00
Jared Boone
71c7f543c5
JTAG: Add TAP state management.
...
Not all that happy with the implementation, but it's doing the job for now.
2016-07-17 15:44:30 -07:00
Jared Boone
c0f4fbe32d
JTAG: Add GPIO definitions for HackRF CPLD.
2016-07-16 14:06:58 -07:00
Jared Boone
22143c9543
JTAG: Remove unused methods.
2016-07-13 11:02:13 -07:00
Jared Boone
18fe30136e
JTAG: Move Target interface to separate header.
2016-07-11 09:39:02 -07:00
Jared Boone
6917ffe1e3
JTAG: Clean up definition of Target interface.
2016-07-11 09:16:47 -07:00
Jared Boone
ad4a68f90a
CMake: Generate portapack_cpld_data.cpp from SVF via tool.
2016-07-05 12:45:31 -07:00
Jared Boone
3ed1d9e24a
CPLD: Method to calculate bitstream CRC32.
2016-07-05 12:06:51 -07:00
Jared Boone
df825807d6
CRC: Rearrange public methods to reduce user error.
...
If you can access process_bits() without considering RevIn value, you will likely not get the CRC value you're expecting! Put RevIn check where it belongs, in process_bits().
2016-07-05 11:57:57 -07:00
Jared Boone
57293bc5eb
Clear application message queue after baseband is shut down.
2016-07-02 16:19:41 -07:00
Jared Boone
eac4cf678a
Capture M4 chDbgPanic msg, show in application.
2016-07-02 15:33:03 -07:00
Jared Boone
97ba19af24
Change M4 loader to use image tags.
...
Also finish moving HackRF binary to tagged image region.
2016-07-01 10:37:22 -07:00
Jared Boone
0e62876578
Add types for tagged data chunks in SPI flash.
2016-07-01 10:32:52 -07:00
Jared Boone
d41c6ee36a
Simplify app->baseband message handling.
...
No need for a FIFO when all messages are intended to be synchronous.
2016-06-24 14:16:45 -07:00
Jared Boone
264c19b312
Rename CaptureThread message, callback method, handle success.
2016-06-21 12:05:55 -07:00
Jared Boone
81d4e59aeb
Add CaptureThread success_callback.
2016-06-21 11:53:07 -07:00
Jared Boone
cfaa44b02a
Send CaptureThread error into app-local message queue.
2016-06-21 11:04:10 -07:00
Jared Boone
dbe735233a
Add app-local MessageQueue.
2016-06-21 10:57:44 -07:00
Jared Boone
7023616808
Move MessageQueue locations in SharedMemory structure.
2016-06-21 10:56:00 -07:00
Jared Boone
9f95eb90a3
Shrink baseband queue size, 2^12 -> 2^11.
2016-06-21 10:55:24 -07:00
Jared Boone
6bd191349a
Hide MessageHandlerMap.
...
Definitely didn't belong in message.hpp, saw no reason to expose it outside translation unit (.cpp file).
2016-06-19 22:56:06 -07:00
Jared Boone
a475daeeea
TPMS: Validate checksum for OOK 8k192 Schrader.
2016-06-02 23:09:55 -07:00
Jared Boone
9628815da7
TPMS: Validate checksum for the OOK 8k4 Schrader variant.
2016-06-02 22:22:22 -07:00
Jared Boone
a52d0fbd81
Rename format_manchester/ManchesterFormatted to "[sS]ymbols".
2016-05-30 11:24:59 -07:00
Jared Boone
3d22222689
Extract DecodedSymbol from ManchesterDecoder.
2016-05-30 11:23:13 -07:00
furrtek
e15f659a6a
RDS radiotext transmit (group 2A)
...
Keyboard/Unistroke text input method selection
2016-05-29 12:06:47 +02:00
Jared Boone
05b55f2696
TPMS: Extract packet readers.
2016-05-27 13:41:56 -07:00
furrtek
6a0816ba56
Added carrier wake up in Xylos TX and cute icons
2016-05-27 06:48:04 +02:00
Jared Boone
04c472e802
Push SignalType inside tpms::Packet.
2016-05-25 17:58:32 -07:00
Jared Boone
ff57b3c8cb
Add Color-only constructor to ui::Rectangle widget.
2016-05-25 11:32:06 -07:00
Jared Boone
38b374506e
More TPMS variable/enum renaming.
2016-05-23 18:02:25 -07:00
Jared Boone
05df04df7e
TPMS: Quick implementation of "flags" column.
...
For now, shows only for Schrader OOK packets: top (left) nibble is function code, bottom nibble has two-bit checksum.
2016-05-17 14:23:03 -07:00
furrtek
7a90eab407
3MHz-wide fast close call works :) >3MHz doesn't work anymore :(
2016-05-17 20:27:51 +02:00
Jared Boone
40859444fe
Update TPMS field handling for Schrader devices.
...
Thanks to mossmann for discovering these details.
2016-05-17 11:27:19 -07:00
Jared Boone
ad554b28b5
Rename TPMS clock recovery, packet builders for accuracy.
2016-05-17 11:11:30 -07:00
Jared Boone
682a1706a3
Improve File error handling. Massive effects...
...
API is somewhat stolen from Rust std::fs::File. Static factories didn't work out so well, though. Move semantics made my head explode.
TODO: Still a lot of places where errors aren't handled, but it's an improvement...
2016-05-16 14:01:44 -07:00
furrtek
e959d9a8ec
More messagepack
2016-05-16 12:02:45 +02:00
furrtek
61fdb57b8f
Testing Messagepack for saving/loading stuff from SD card
2016-05-15 02:35:08 +02:00
furrtek
7267de234d
Added EPAR transmit (slow FSK), bit bug for now
2016-05-13 09:34:15 +02:00
furrtek
9149508c83
Improved close call precision
2016-05-13 01:18:04 +02:00
furrtek
7d193c3445
Close call tuning fix, more UI elements
2016-05-11 23:57:22 +02:00
furrtek
fb21c1332e
Started close call dev
2016-05-11 12:45:03 +02:00
Jared Boone
b82eff51dd
Refactor of capture buffer management between cores.
...
Instead of copying data into and out of FIFO, passing buffer pointers between cores that are sized to match preferred/ideal SD card write size.
2016-05-10 14:12:37 -07:00
furrtek
4511090eae
Unistroke in dirty code
2016-05-10 04:24:19 +02:00
furrtek
569f299f42
Merge
2016-05-09 21:05:11 +02:00
furrtek
d40016ffda
Fixed LCR and Xylos transmitters
2016-05-09 20:42:20 +02:00
Jared Boone
dc2944d5e9
Make Widget::screen_rect() const.
...
Because I can.
2016-05-08 14:59:26 -07:00
Jared Boone
ab73d6155e
Improve arrow key next focus algorithm.
2016-05-08 14:59:03 -07:00
Jared Boone
0d6103916d
Converge File object with std::fstream. Simplify LogFile.
...
LogFile no longer watches SD card presence and tries to open/close files dynamically.
2016-04-30 15:09:34 -07:00
furrtek
d55a420dfd
Fixed module loading (again), only audio tx works for now
2016-04-28 14:59:14 +02:00
Jared Boone
dc8c34487f
Speed dropped_percent() common case, ensure dropped>0 returns >0%.
2016-04-27 12:16:37 -07:00
Jared Boone
a72a3489cf
Expose percent of data dropped during capture.
2016-04-27 12:04:02 -07:00
Jared Boone
1789868b8a
Track bytes from baseband and dropped when entering capture FIFO.
2016-04-27 10:40:50 -07:00
Jared Boone
91ee2dbb67
Move FIFO and write size to CaptureConfig structure.
...
Now configured from baseband, where write size and appropriate FIFO size is known.
2016-04-26 22:26:30 -07:00
Jared Boone
ed3ac5249f
Move MessageQueue::signal into .cpp file.
2016-04-23 22:00:27 -07:00
Jared Boone
d5e21ce972
Use CaptureConfig to share state between cores.
...
Remove awful FIFO_HACK.
TODO: Lots of repeated code...
TODO: Capture thread is signalled too frequently.
2016-04-23 15:07:44 -07:00
Jared Boone
7436dea51a
Add CaptureConfig structure and message.
2016-04-23 14:54:15 -07:00
Jared Boone
27a1423309
De-constexpr a few UI constructors.
...
Because it was silly.
2016-04-22 11:18:35 -07:00
furrtek
2fcfdba9ea
"At least it builds !"
2016-04-21 22:12:51 +02:00
furrtek
1b0da68d65
Merge remote-tracking branch 'upstream/master'
...
Conflicts:
firmware/application/Makefile
firmware/application/core_control.cpp
firmware/application/touch.cpp
firmware/application/ui_debug.cpp
firmware/application/ui_debug.hpp
firmware/application/ui_navigation.cpp
firmware/baseband/baseband_thread.cpp
2016-04-21 20:36:19 +02:00
Jared Boone
59f1a32566
Semi-naive audio recording to SD card.
2016-04-11 10:20:19 -07:00
Jared Boone
c01f2d82e1
Move TPMS taps to dsp_fir_taps.hpp.
...
Will soon use in proc_record.cpp.
2016-04-11 10:18:31 -07:00
Jared Boone
f76750e55b
Add LFSR random number generator.
...
Used for SD card write/read testing, maybe other stuff eventually?
2016-04-10 16:30:28 -07:00
Jared Boone
38ba02a68f
Change File::open to File::open_for_writing.
...
Not thrilled about the File API right now...
2016-04-10 15:55:01 -07:00
Jared Boone
f8d496d9d1
Remove cpu_clock.* -- unused.
...
ClockManager does all that stuff.
2016-04-09 21:33:12 -07:00
Jared Boone
b35a8c4501
Add TPMS signal_type.
2016-04-06 17:04:40 -07:00
Jared Boone
635b1fd4c3
Extract TPMS packet stuff to separate files.
2016-04-06 17:01:54 -07:00
Jared Boone
b7c0efbb64
Add ERT commodity type.
2016-04-06 16:16:10 -07:00
Jared Boone
6571ef0c11
Prevent alternate MessageQueue constructors.
2016-02-27 21:20:16 -08:00
Jared Boone
0fae1488c4
Hide most of MessageQueue functions.
2016-02-27 21:19:51 -08:00
Jared Boone
bf348cf30a
Move message handling loops to MessageQueue.
2016-02-27 21:07:11 -08:00
Jared Boone
eb294c8e1c
Add chDbgPanic for unhandled exceptions.
2016-02-27 12:05:29 -08:00
Jared Boone
36c38e4a24
Quiet narrowing conversion warning.
2016-02-22 14:19:26 -08:00
Jared Boone
19609469a5
Quiet shift-overflow compiler warning.
2016-02-22 14:18:53 -08:00
Jared Boone
925394c54b
Bodgy code to write PNG files the size of the LCD screen.
2016-02-19 15:33:27 -08:00
Jared Boone
77eb0c5d24
ILI9341 read_pixels().
...
Improves on / abstracts prior interface, which just handed back uint16_ts from the LCD's parallel interface.
2016-02-19 15:31:56 -08:00
Jared Boone
bdaa13c103
CRC, Adler32 interfaces accept void* blocks.
...
...despite my better judgement.
2016-02-19 15:30:35 -08:00
Jared Boone
6d0995e165
Function to read bytes from 16-bit LCD interface.
...
...begin careful not to overread from the LCD, or overwrite to the buffer.
2016-02-19 15:29:00 -08:00
Jared Boone
1f79c72bf0
Remove irrelevant comment from portapack::io.
2016-02-19 15:28:15 -08:00
Jared Boone
322a15587a
Add ColorRGB888 type for data from LCD frame buffer.
2016-02-19 15:27:50 -08:00
Jared Boone
5ed76d6985
Adler32 implementation (for PNG writer).
2016-02-19 14:13:15 -08:00
Jared Boone
daeb542086
Remove constexpr use of std::log2, std::log10.
...
GCC 4.9 doesn't care for it.
2016-02-19 10:30:26 -08:00
Jared Boone
d6d1f6b8af
Missing #include.
2016-02-19 08:57:07 -08:00
Jared Boone
1e0d34c98b
CRC internal type more suitable for ARM.
2016-02-18 21:31:51 -08:00
Jared Boone
00fb25f143
CRC class now supports reverse of input/output.
2016-02-18 20:36:32 -08:00
Jared Boone
0681f9c5df
Init message queues in M0 event dispatcher.
2016-02-16 11:23:02 -08:00
Jared Boone
ef86848139
Change baseband floats to normalize at +/-1.0.
2016-02-14 12:38:50 -08:00
Jared Boone
64e4cde7f5
fast_pow2() implemented.
2016-02-13 11:18:34 -08:00
Jared Boone
d2531016e5
Expose fast_log2().
2016-02-13 11:18:15 -08:00
Jared Boone
4321deee1e
ChibiOS memory helper functions.
2016-02-12 13:52:22 -08:00
Jared Boone
d125a5c662
Remove "K" parameter from FIFO template.
2016-02-10 10:41:06 -08:00
Jared Boone
dfbcf5bc75
Extract some constexpr math utilities to utility.hpp
...
...my dumping ground for so many random bits.
2016-02-10 10:15:42 -08:00
Jared Boone
ae93d8ee58
Simplify RSSI/BB DMA, extract to ThreadWait class.
...
Also saved 688 bytes of code.
2016-02-09 10:41:19 -08:00
Jared Boone
5cd423bb20
Fast log2 implementation.
...
Big improvement in code size (2034 bytes!). Baseband FFT (idle) thread CPU cut in half.
2016-02-08 12:55:06 -08:00
Jared Boone
cdd15fcf79
Rework complex16_mag_squared_to_dbv_norm() to use log2.
...
Small code size reduction and improvement in CPU effort.
2016-02-08 12:35:20 -08:00
Jared Boone
3aabd804d3
Remove commented code.
2016-02-07 21:52:36 -08:00
Jared Boone
5a66c68861
Return Widget::children() by reference.
2016-02-07 11:24:25 -08:00
Jared Boone
2b6bc03408
Remove unfinished Widget last child focus code.
2016-02-07 11:06:16 -08:00
Jared Boone
31499fea5d
Rewrite Widget::screen_pos() in terms of screen_rect().
2016-02-07 10:55:55 -08:00
Jared Boone
a420f018c7
Remove unused View::dirty_screen_rect member.
2016-02-07 10:53:40 -08:00
Jared Boone
41d4fd0044
Remove unused View::initial_focus().
2016-02-07 10:42:41 -08:00
Jared Boone
3a709c51c4
Hide more Widget member variables.
2016-02-07 10:40:06 -08:00
Jared Boone
7cb3bbc9f8
Make Widget flags private, expose via methods.
2016-02-07 10:32:38 -08:00
furrtek
ba94ce55ef
Loadmodule emergency fix
2016-02-06 23:19:28 +01:00
Jared Boone
a9451c17b4
Move PPB clock adjustment out of ReceiverModel.
2016-02-05 16:52:34 -08:00
Jared Boone
fd3f962e40
Define and utilize memory region backup_ram.
2016-02-05 16:45:23 -08:00
Jared Boone
0294165481
Extract LOTS of stuff into an audio API.
...
Prevent all manner of type and implementation leakage.
2016-02-05 16:25:43 -08:00
Jared Boone
9430c94dec
Move I2S management to application side.
2016-02-05 15:25:08 -08:00
Jared Boone
80511ac93f
Improve repaint scope when widgets removed from parent.
...
Addresses flickering (again!) when switching between options views in receiver app.
2016-02-05 10:44:09 -08:00
furrtek
85103fdd54
"sdcard" folder, for clarity
2016-02-05 17:50:35 +01:00
furrtek
c81ba5be8e
"At least it builds, now"
2016-02-05 17:40:14 +01:00
furrtek
8009a9b543
Merge remote-tracking branch 'upstream/master'
...
Conflicts:
firmware/application/Makefile
firmware/application/analog_audio_app.cpp
firmware/application/analog_audio_app.hpp
firmware/application/event.cpp
firmware/application/irq_ipc.hpp
firmware/application/portapack.hpp
firmware/application/receiver_model.cpp
firmware/application/receiver_model.hpp
firmware/application/recent_entries.cpp
firmware/application/string_format.hpp
firmware/application/ui_debug.cpp
firmware/application/ui_debug.hpp
firmware/application/ui_menu.cpp
firmware/application/ui_navigation.cpp
firmware/application/ui_navigation.hpp
firmware/application/ui_receiver.cpp
firmware/application/ui_receiver.hpp
firmware/application/ui_sd_card_status_view.cpp
firmware/application/ui_sd_card_status_view.hpp
firmware/application/ui_setup.cpp
firmware/application/ui_setup.hpp
firmware/application/ui_spectrum.hpp
firmware/baseband-tx/dsp_fir_taps.cpp
firmware/baseband-tx/dsp_fir_taps.hpp
firmware/baseband-tx/irq_ipc_m4.cpp
firmware/baseband-tx/irq_ipc_m4.hpp
firmware/baseband-tx/proc_audiotx.cpp
firmware/baseband/Makefile
firmware/baseband/audio_output.cpp
firmware/baseband/audio_output.hpp
firmware/baseband/block_decimator.hpp
firmware/baseband/dsp_decimate.cpp
firmware/baseband/dsp_decimate.hpp
firmware/baseband/dsp_demodulate.cpp
firmware/baseband/dsp_demodulate.hpp
firmware/baseband/dsp_fir_taps.cpp
firmware/baseband/irq_ipc_m4.cpp
firmware/baseband/irq_ipc_m4.hpp
firmware/baseband/proc_am_audio.cpp
firmware/baseband/proc_am_audio.hpp
firmware/baseband/proc_nfm_audio.cpp
firmware/baseband/proc_nfm_audio.hpp
firmware/baseband/proc_wfm_audio.cpp
firmware/baseband/proc_wfm_audio.hpp
firmware/baseband/spectrum_collector.hpp
firmware/common/dsp_fir_taps.cpp
firmware/common/dsp_fir_taps.hpp
firmware/common/event.hpp
firmware/common/message.hpp
firmware/common/ui_painter.cpp
firmware/common/ui_painter.hpp
2016-02-04 11:35:55 +01:00
furrtek
6e496e2b26
Merge fixing, commit to catch up on recent files
2016-02-04 10:27:53 +01:00
Jared Boone
1d2dd4e19d
Old GCC on Travis-CI was cheesed off by my new syntax.
2016-02-03 17:59:46 -08:00
Jared Boone
84824a504f
Add UI Image and ImageButton classes.
2016-02-03 15:48:50 -08:00
Jared Boone
76013a656c
Add Painter.draw_bitmap for Bitmap types.
2016-02-03 13:23:46 -08:00
Jared Boone
deade67fd8
Add ui::Bitmap for two-color images.
2016-02-03 13:23:23 -08:00
Jared Boone
5d0b5d427a
Extract draw_bitmap from draw_glyph.
2016-02-03 10:33:54 -08:00
Jared Boone
be8c1307e2
Add OptionsField event for on_focus.
...
TODO: So poorly named! Should be on_focus, but requires sweeping changes. Ugh.
2016-02-02 13:41:11 -08:00
furrtek
44638e504b
SYNC
2016-01-31 09:34:24 +01:00
furrtek
7e56183986
Sync
2016-01-31 08:37:08 +01:00
Jared Boone
ccafc1e82c
Fix DSB channel filter taps, don't saturate max tap value.
2016-01-30 20:45:16 -08:00
Jared Boone
a79aa3e580
Correct DSB decim_2 FIR taps comment.
2016-01-30 19:03:50 -08:00
Jared Boone
a97cd642ac
Multiple AM modes selection in application API.
2016-01-30 19:03:32 -08:00
Jared Boone
a1e1677b8b
Rename AM modulation mode "DSB".
2016-01-30 18:17:29 -08:00
Jared Boone
e778be6472
Selection of AM/SSB from application side.
2016-01-30 18:02:28 -08:00
Jared Boone
f2dff16820
Use complex channel filter taps for AM/SSB.
2016-01-30 17:30:54 -08:00
Jared Boone
1915ff980f
Add AM processor decim_2.
2016-01-30 17:28:11 -08:00
Jared Boone
279e5c775d
Add LSB filter taps.
2016-01-30 17:23:04 -08:00
Jared Boone
69deaafd1c
Clean up formatting of USB FIR filter taps.
2016-01-30 17:22:38 -08:00
Jared Boone
b029bacd8c
Remove channel decimation from AMConfigureMessage.
2016-01-30 17:21:48 -08:00
Jared Boone
f82a22dd2c
USB channel filter.
2016-01-29 22:29:52 -08:00
Jared Boone
b9c2ba4053
Add fir_taps_complex structure.
2016-01-29 22:29:23 -08:00
Jared Boone
aead1d8798
Change NBFM audio fs->24k, AM ->12k.
...
Send channel decimation factor from application to baseband.
2016-01-29 19:23:30 -08:00
Jared Boone
65d224be14
Add IIR configs for fs=24kHz NBFM and fs=12kHz AM.
2016-01-29 18:31:03 -08:00
Jared Boone
96898f82b2
Pass IIR configs from application to baseband.
2016-01-29 15:57:20 -08:00
Jared Boone
01e14ecbcf
Move IIR struct and configs to common/.
2016-01-29 15:43:39 -08:00
furrtek
107c212d88
Completely useless "about" screen
...
Paved road for talking Xylos RX and logger
Added test button for Xylos TX
Fixed jammer crashing after loading second time
2016-01-30 00:28:05 +01:00
Jared Boone
275b644edd
Fix flickering freq/gain options views.
...
Was caused by invalidating ALL of the parent view, when only the overlapping views would need to be repainted.
2016-01-27 21:47:10 -08:00
Jared Boone
b801366e4e
Recover from display sleep, use LCD sleep function.
2016-01-27 21:05:28 -08:00
Jared Boone
894d4b955c
Unclever first attempt at display sleep.
2016-01-27 20:33:54 -08:00
Jared Boone
7519b83379
Make better use of range_t methods.
2016-01-27 14:46:45 -08:00
Jared Boone
018b54c711
Extract range_t to utility header.
2016-01-27 12:09:36 -08:00
Jared Boone
0efe2ea0ae
Add virtual title() to View class.
2016-01-26 13:01:16 -08:00
Jared Boone
a13e19a907
Paint background of Text object before string.
2016-01-26 13:00:36 -08:00
Jared Boone
798b5eb972
Extract Temperature, Pressure into units header.
2016-01-23 21:37:22 -08:00
Jared Boone
45ae222ab5
Extract Optional to own header.
2016-01-23 21:26:06 -08:00
Jared Boone
14f18d5cf7
Reduce use of unsigned integers when signed will do fine.
2016-01-23 17:53:16 -08:00