Now that we're using rand.Shuffle in a few locations, create a generic
shuffle function and use it instead. While we're at it, move the
interleaveSlices function to the same package for use.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I0b00920e5b3eea846b6cedc30bd34d978a049fd3
The debug flag on tailscaled isn't available in the macOS App Store
build, since we don't have a tailscaled binary; move it to the
'tailscale debug' CLI that is available on all platforms instead,
accessed over LocalAPI.
Updates #7377
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I47bffe4461e036fab577c2e51e173f4003592ff7
Followup to #7177 to avoid adding extra dependencies to the CLI. We
instead declare an interface for the link monitor.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This is to address a possible DNS failure on startup. Before this
change IPv6 addresses would be listed first, and the client dialer would
fail for hosts without IPv6 connectivity.
We had two implemenetations of the kube client, merge them.
containerboot was also using a raw http.Transport, this also has
the side effect of making it use a http.Client
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Given recent changes in corp, I originally thought we could remove all of the
syso files, but then I realized that we still need them so that binaries built
purely from OSS (without going through corp) will still receive a manifest.
We can remove the arm32 one though, since we don't support 32-bit ARM on Windows.
Updates https://github.com/tailscale/corp/issues/9576
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
"Device Authorization" was recently renamed to "Device Approval"
on the control side. This change updates the k8s operator to match.
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
"Device Authorization" was recently renamed to "Device Approval"
on the control side. This change updates tsconnect to match.
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Uses the hooks added by tailscale/go#45 to instrument the reads and
writes on the major code paths that do network I/O in the client. The
convention is to use "<package>.<type>:<label>" as the annotation for
the responsible code path.
Enabled on iOS, macOS and Android only, since mobile platforms are the
ones we're most interested in, and we are less sensitive to any
throughput degradation due to the per-I/O callback overhead (macOS is
also enabled for ease of testing during development).
For now just exposed as counters on a /v0/sockstats PeerAPI endpoint.
We also keep track of the current interface so that we can break out
the stats by interface.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
"Device Authorization" was recently renamed to "Device Approval"
on the control side. This change updates the linux cli to match.
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
The log ID types were moved to a separate package so that
code that only depend on log ID types do not need to link
in the logic for the logtail client itself.
Not all code need the logtail client.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This allows us to differentiate between the various tsnet apps that
we have like `golinks` and `k8s-operator`.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
trimmed builds don't have absolute path information in executable
metadata, which leads the runtime.Caller approach failing
mysteriously in yarn with complaints about relative package paths.
So, instead of using embedded package metadata to find paths,
expect that we're being invoked within the tailscale repo, and
locate the tsconnect directory that way.
Signed-off-by: David Anderson <danderson@tailscale.com>
This ensures that we put the kubeconfig in the correct directory from within the macOS Sandbox when
paired with tailscale/corp@3035ef7
Updates #7220
Signed-off-by: Maisem Ali <maisem@tailscale.com>
In the switch to static toolchains, we removed a legacy oddity from the
toolchain URL structure, but forgot to update printdep.
Signed-off-by: David Anderson <danderson@tailscale.com>
With #6566 we added an external mechanism for getting the default
interface, and used it on macOS and iOS (see tailscale/corp#8201).
The goal was to be able to get the default physical interface even when
using an exit node (in which case the routing table would say that the
Tailscale utun* interface is the default).
However, the external mechanism turns out to be unreliable in some
cases, e.g. when multiple cellular interfaces are present/toggled (I
have occasionally gotten my phone into a state where it reports the pdp_ip1
interface as the default, even though it can't actually route traffic).
It was observed that `ifconfig -v` on macOS reports an "effective interface"
for the Tailscale utn* interface, which seems promising. By examining
the ifconfig source code, it turns out that this is done via a
SIOCGIFDELEGATE ioctl syscall. Though this is a private API, it appears
to have been around for a long time (e.g. it's in the 10.13 xnu release
at https://opensource.apple.com/source/xnu/xnu-4570.41.2/bsd/net/if_types.h.auto.html)
and thus is unlikely to go away.
We can thus use this ioctl if the routing table says that a utun*
interface is the default, and go back to the simpler mechanism that
we had before #6566.
Updates #7184
Updates #7188
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Tailnet-owned auth keys (which all OAuth-created keys are) must include tags, since there is no user to own the registered devices.
Signed-off-by: Will Norris <will@tailscale.com>
Also removes the toolchain builds from flake.nix. For now the flake
build uses upstream Go 1.20, a followup change will switch it back to
our custom toolchain.
Updates tailscale/corp#9005
Signed-off-by: David Anderson <danderson@tailscale.com>
When we make a connection to a server, we previously would verify with
the system roots, and then fall back to verifying with our baked-in
Let's Encrypt root if the system root cert verification failed.
We now explicitly check for, and log a health error on, self-signed
certificates. Additionally, we now always verify against our baked-in
Let's Encrypt root certificate and log an error if that isn't
successful. We don't consider this a health failure, since if we ever
change our server certificate issuer in the future older non-updated
versions of Tailscale will no longer be healthy despite being able to
connect.
Updates #3198
Change-Id: I00be5ceb8afee544ee795e3c7a2815476abc4abf
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
It's since been rewritten in Swift.
#cleanup
Change-Id: I0860d681e8728697804ce565f63c5613b8b1088c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It includes xtermjs/xterm.js#4216, which improves handling of some
escape sequences. Unfortunately it's not enough to fix the issue
with `ponysay`, but it does not hurt to be up to date.
Updates #6090
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
`prober.DERP` was created in #5988 based on derpprobe. Having used it
instead of derpprobe for a few months, I think we have enough confidence
that it works and can now migrate derpprobe to use the prober framework
and get rid of code duplication.
A few notable changes in behaviour:
- results of STUN probes over IPv4 and IPv6 are now reported separately;
- TLS probing now includes OCSP verification;
- probe names in the output have changed;
- ability to send Slack notification from the prober has been removed.
Instead, the prober now exports metrics in Expvar (/debug/vars) and
Prometheus (/debug/varz) formats.
Fixes https://github.com/tailscale/corp/issues/8497
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Makes the Wasm client more similar to the others, and allows the default
profile to be correctly picked up when restarting the client in dev
mode (where we persist the state in sessionStorage).
Also update README to reflect that Go wasm changes can be picked up
with just a reload (as of #5383)
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
There is no stable release yet, and for alpha we want people on the
unstable build while we iterate.
Updates #502
Signed-off-by: David Anderson <danderson@tailscale.com>
Update all code generation tools, and those that check for license
headers to use the new standard header.
Also update copyright statement in LICENSE file.
Fixes#6865
Signed-off-by: Will Norris <will@tailscale.com>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
Running sync-containers in a GitHub workflow will be
simpler if we check github.Keychain, which uses the
GITHUB_TOKEN if present.
Updates https://github.com/tailscale/corp/issues/8461
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
The dependency injection functionality has been deprecated a while back
and it'll be removed in the 0.15 release of Controller Runtime. This
changeset sets the Client after creating the Manager, instead of using
InjectClient.
Signed-off-by: Vince Prignano <vince@prigna.com>
Per recent user confusion on a QNAP issue.
Change-Id: Ibda00013df793fb831f4088b40be8a04dfad17c2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Add `tailscale version --json` JSON output mode. This will be used
later for a double-opt-in (per node consent like Tailscale SSH +
control config) to let admins do remote upgrades via `tailscale
update` via a c2n call, which would then need to verify the
cmd/tailscale found on disk for running tailscale update corresponds
to the running tailscaled, refusing if anything looks amiss.
Plus JSON output modes are just nice to have, rather than parsing
unstable/fragile/obscure text formats.
Updates #6995
Updates #6907
Change-Id: I7821ab7fbea4612f4b9b7bdc1be1ad1095aca71b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
They changed a type in their SDK which meant others using the AWS APIs
in their Go programs (with newer AWS modules in their caller go.mod)
and then depending on Tailscale (for e.g. tsnet) then couldn't compile
ipn/store/awsstore.
Thanks to @thisisaaronland for bringing this up.
Fixes#7019
Change-Id: I8d2919183dabd6045a96120bb52940a9bb27193b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Create an interface and mock implementation of tailscale.LocalClient for
serve command tests.
Updates #6304Closes#6372
Signed-off-by: Shayne Sweeney <shayne@tailscale.com>
Goal: one way for users to update Tailscale, downgrade, switch tracks,
regardless of platform (Windows, most Linux distros, macOS, Synology).
This is a start.
Updates #755, etc
Change-Id: I23466da1ba41b45f0029ca79a17f5796c2eedd92
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
UI works remains, but data is there now.
Updates #4015
Change-Id: Ib91e94718b655ad60a63596e59468f3b3b102306
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The -terminate-tls flag is for the tcp subsubcommand, not the serve
subcommand like the usage example suggests.
Signed-off-by: salman <salman@tailscale.com>
QNAP's "Force HTTPS" mode redirects even localhost HTTP to
HTTPS, but uses a self-signed certificate which fails
verification. We accommodate this by disabling checking
of the cert.
Fixes https://github.com/tailscale/tailscale/issues/6903
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
We still accept the previous TS_AUTH_KEY for backwards compatibility, but the documented option name is the spelling we use everywhere else.
Updates #6321
Signed-off-by: David Anderson <danderson@tailscale.com>
With a42a594bb3, iOS uses netstack and
hence there are no longer any platforms which use the legacy MagicDNS path. As such, we remove it.
We also normalize the limit for max in-flight DNS queries on iOS (it was 64, now its 256 as per other platforms).
It was 64 for the sake of being cautious about memory, but now we have 50Mb (iOS-15 and greater) instead of 15Mb
so we have the spare headroom.
Signed-off-by: Tom DNetto <tom@tailscale.com>
This makes `tailscale debug watch-ipn` safe to use for troubleshooting
user issues, in addition to local debugging during development.
Signed-off-by: David Anderson <danderson@tailscale.com>
The macOS client was forgetting to call netstack.Impl.SetLocalBackend.
Change the API so that it can't be started without one, eliminating this
class of bug. Then update all the callers.
Updates #6764
Change-Id: I2b3a4f31fdfd9fdbbbbfe25a42db0c505373562f
Signed-off-by: Claire Wang <claire@tailscale.com>
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It's long & distracting for how low value it is.
Fixes#6766
Change-Id: I51364f25c0088d9e63deb9f692ba44031f12251b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In some configurations, user explicitly do not want to store
tailscale state in k8s secrets, because doing that leads to
some annoying permission issues with sidecar containers.
With this change, TS_KUBE_SECRET="" and TS_STATE_DIR=/foo
will force storage to file when running in kubernetes.
Fixes#6704.
Signed-off-by: David Anderson <danderson@tailscale.com>
