The operator creates a fair bit of internal cluster state to manage proxying,
dumping it all in the default namespace is handy for development but rude
for production.
Updates #502
Signed-off-by: David Anderson <danderson@tailscale.com>
We used to need to do timed requeues in a few places in the reconcile logic,
and the easiest way to do that was to plumb reconcile.Result return values
around. But now we're purely event-driven, so the only thing we care about
is whether or not an error occurred.
Incidentally also fix a very minor bug where headless services would get
completely ignored, rather than reconciled into the correct state. This
shouldn't matter in practice because you can't transition from a headful
to a headless service without a deletion, but for consistency let's avoid
having a path that takes no definite action if a service of interest does
exist.
Updates #502.
Signed-off-by: David Anderson <danderson@tailscale.com>
Previously, we had to do blind timed requeues while waiting for
the tailscale hostname, because we looked up the hostname through
the API. But now the proxy container image writes back its hostname
to the k8s secret, so we get an event-triggered reconcile automatically
when the time is right.
Updates #502
Signed-off-by: David Anderson <danderson@tailscale.com>
As is convention in the k8s world, use zap for structured logging. For
development, OPERATOR_LOGGING=dev switches to a more human-readable output
than JSON.
Updates #502
Signed-off-by: David Anderson <danderson@tailscale.com>
Our reconcile loop gets triggered again when the StatefulSet object
finally disappears (in addition to when its deletion starts, as indicated
by DeletionTimestamp != 0). So, we don't need to queue additional
reconciliations to proceed with the remainder of the cleanup, that
happens organically.
Signed-off-by: David Anderson <danderson@tailscale.com>
Tests cover configuring a proxy through an annotation rather than a
LoadBalancerClass, and converting between those two modes at runtime.
Updates #502.
Signed-off-by: David Anderson <danderson@tailscale.com>
For other test cases, the operator is going to produce similar generated
objects in several codepaths, and those objects are large. Move them out
to helpers so that the main test code stays a bit more intelligible.
The top-level Service that we start and end with remains in the main test
body, because its shape at the start and end is one of the main things that
varies a lot between test cases.
Updates #502.
Signed-off-by: David Anderson <danderson@tailscale.com>
The test verifies one of the successful reconcile paths, where
a client requests an exposed service via a LoadBalancer class.
Updates #502.
Signed-off-by: David Anderson <danderson@tailscale.com>
Also introduces an intermediary interface for the tailscale client, in
preparation for operator tests that fake out the Tailscale API interaction.
Updates #502.
Signed-off-by: David Anderson <danderson@tailscale.com>
This was initially developed in a separate repo, but for build/release
reasons and because go module management limits the damage of importing
k8s things now, moving it into this repo.
At time of commit, the operator enables exposing services over tailscale,
with the 'tailscale' loadBalancerClass. It also currently requires an
unreleased feature to access the Tailscale API, so is not usable yet.
Updates #502.
Signed-off-by: David Anderson <danderson@tailscale.com>
We've been doing a hard kill of the subprocess, which is only safe as long as
both the cli and gui are not running and the subprocess has had the opportunity
to clean up DNS settings etc. If unattended mode is turned on, this is definitely
unsafe.
I changed babysitProc to close the subprocess's stdin to make it shut down, and
then I plumbed a cancel function into the stdin reader on the subprocess side.
Fixes https://github.com/tailscale/corp/issues/5621
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This is temporary while we work to upstream performance work in
https://github.com/WireGuard/wireguard-go/pull/64. A replace directive
is less ideal as it breaks dependent code without duplication of the
directive.
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This commit updates the wireguard-go dependency and implements the
necessary changes to the tun.Device and conn.Bind implementations to
support passing vectors of packets in tailscaled. This significantly
improves throughput performance on Linux.
Updates #414
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Signed-off-by: James Tucker <james@tailscale.com>
Co-authored-by: James Tucker <james@tailscale.com>
This avoids the issue in the common case where the socket path is the
default path, avoiding the immediate need for a Windows shell quote
implementation.
Updates #6639
Signed-off-by: James Tucker <james@tailscale.com>
Fixes#6400
open up GETs for localapi serve-config to allow read-only access to
ServeConfig
`tailscale status` will include "Funnel on" status when Funnel is
configured. Prints nothing if Funnel is not running.
Example:
$ tailscale status
<nodes redacted>
# Funnel on:
# - https://node-name.corp.ts.net
# - https://node-name.corp.ts.net:8443
# - tcp://node-name.corp.ts.net:10000
Signed-off-by: Shayne Sweeney <shayne@tailscale.com>
We still have to shell out to `tailscale up` because the container image's
API includes "arbitrary flags to tailscale up", unfortunately. But this
should still speed up startup a little, and also enables k8s-bound containers
to update their device information as new netmap updates come in.
Fixes#6657
Signed-off-by: David Anderson <danderson@tailscale.com>
* Do not print the status at the end of a successful operation
* Ensure the key of the current node is actually trusted to make these changes
Signed-off-by: Tom DNetto <tom@tailscale.com>
WinTun is installed lazily by tailscaled while it is running as LocalSystem.
Based upon what we're seeing in bug reports and support requests, removing
WinTun as a lesser user may fail under certain Windows versions, even when that
user is an Administrator.
By adding a user-defined command code to tailscaled, we can ask the service to
do the removal on our behalf while it is still running as LocalSystem.
* The uninstall code is basically the same as it is in corp;
* The command code will be sent as a service control request and is protected by
the SERVICE_USER_DEFINED_CONTROL access right, which requires Administrator.
I'll be adding follow-up patches in corp to engage this functionality.
Updates https://github.com/tailscale/tailscale/issues/6433
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
This handles the case where the inner *os.PathError is wrapped in
another error type, and additionally will redact errors of type
*os.LinkError. Finally, add tests to verify that redaction works.
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ie83424ff6c85cdb29fb48b641330c495107aab7c
x/exp/slices now has ContainsFunc (golang/go#53983) so we can delete
our versions.
Change-Id: I5157a403bfc1b30e243bf31c8b611da25e995078
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
renamed from `useNetstack` to `onlyNetstack` which is 1 letter more but
more descriptive because we always have netstack enabled and `useNetstack`
doesn't convey what it is supposed to be used for. e.g. we always use
netstack for Tailscale SSH.
Also renamed shouldWrapNetstack to handleSubnetsInNetstack as it was only used
to configure subnet routing via netstack.
Updates tailscale/corp#8020
Signed-off-by: Maisem Ali <maisem@tailscale.com>
To simplify clients getting the initial state when they subscribe.
Change-Id: I2490a5ab2411253717c74265a46a98012b80db82
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When running `tailscale web` as a standalone process,
it was necessary to send auth requests to QTS using
localhost to avoid hitting the proxy recursively.
However running `tailscale web` as a process means it is
consuming RAM all the time even when it isn't actively
doing anything.
After switching back to the `tailscale web` CGI mode, we
don't need to specifically use localhost for QNAP auth.
This reverts commit e0cadc5496.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
This reverts commit f1130421f0.
It was submitted with failing tests (go generate checks)
Requires a lot of API changes to fix so rolling back instead of
forward.
Change-Id: I024e8885c0ed44675d3028a662f386dda811f2ad
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds an envknob to make testing async startup more reproducible.
We want the Windows GUI to behave well when wintun is not (or it's
doing its initial slow driver installation), but during testing it's often
too fast to see that it's working. This lets it be slowed down.
Updates #6522
Change-Id: I6ae19f46e270ea679cbaea32a53888efcf2943a7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously, tstun.Wrapper and magicsock.Conn managed their
own statistics data structure and relied on an external call to
Extract to extract (and reset) the statistics.
This makes it difficult to ensure a maximum size on the statistics
as the caller has no introspection into whether the number
of unique connections is getting too large.
Invert the control flow such that a *connstats.Statistics
is registered with tstun.Wrapper and magicsock.Conn.
Methods on non-nil *connstats.Statistics are called for every packet.
This allows the implementation of connstats.Statistics (in the future)
to better control when it needs to flush to ensure
bounds on maximum sizes.
The value registered into tstun.Wrapper and magicsock.Conn could
be an interface, but that has two performance detriments:
1. Method calls on interface values are more expensive since
they must go through a virtual method dispatch.
2. The implementation would need a sync.Mutex to protect the
statistics value instead of using an atomic.Pointer.
Given that methods on constats.Statistics are called for every packet,
we want reduce the CPU cost on this hot path.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Many packages reference the logtail ID types,
but unfortunately pull in the transitive dependencies of logtail.
Fix this problem by putting the log ID types in its own package
with minimal dependencies.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
I added util/winutil/LookupPseudoUser, which essentially consists of the bits
that I am in the process of adding to Go's standard library.
We check the provided SID for "S-1-5-x" where 17 <= x <= 20 (which are the
known pseudo-users) and then manually populate a os/user.User struct with
the correct information.
Fixes https://github.com/tailscale/tailscale/issues/869
Fixes https://github.com/tailscale/tailscale/issues/2894
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
tailscaled on Windows had two entirely separate start-up paths for running
as a service vs in the foreground. It's been causing problems for ages.
This unifies the two paths, making them be the same as the path used
for every other platform.
Also, it uses the new async LocalBackend support in ipnserver.Server
so the Server can start serving HTTP immediately, even if tun takes
awhile to come up.
Updates #6535
Change-Id: Icc8c4f96d4887b54a024d7ac15ad11096b5a58cf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We use this pattern in a number of places (in this repo and elsewhere)
and I was about to add a fourth to this repo which was crossing the line.
Add this type instead so they're all the same.
Also, we have another Set type (SliceSet, which tracks its keys in
order) in another repo we can move to this package later.
Change-Id: Ibbdcdba5443fae9b6956f63990bdb9e9443cefa9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is step 1 of de-special-casing of Windows and letting the
LocalAPI HTTP server start serving immediately, even while the rest of
the world (notably the Engine and its TUN device) are being created,
which can take a few to dozens of seconds on Windows.
With this change, the ipnserver.New function changes to not take an
Engine and to return immediately, not returning an error, and let its
Run run immediately. If its ServeHTTP is called when it doesn't yet
have a LocalBackend, it returns an error. A TODO in there shows where
a future handler will serve status before an engine is available.
Future changes will:
* delete a bunch of tailscaled_windows.go code and use this new API
* add the ipnserver.Server ServerHTTP handler to await the engine
being available
* use that handler in the Windows GUI client
Updates #6522
Change-Id: Iae94e68c235e850b112a72ea24ad0e0959b568ee
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Still show original, but show de-punycode version in parens,
similar to how we show DNS-less hostnames.
Change-Id: I7e57da5e4029c5b49e8cd3014c350eddd2b3c338
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We'll eventually remove it entirely, but for now move get it out of ipnserver
where it's distracting and move it to its sole caller.
Updates #6522
Change-Id: I9c6f6a91bf9a8e3c5ea997952b7c08c81723d447
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It's only used by Windows. No need for it to be in ipn/ipnserver,
which we're trying to trim down.
Change-Id: Idf923ac8b6cdae8b5338ec26c16fb8b5ea548071
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Unused in this repo as of the earlier #6450 (300aba61a6)
and unused in the Windows GUI as of tailscale/corp#8065.
With this ipn.BackendServer is no longer used and could also be
removed from this repo. The macOS and iOS clients still temporarily
depend on it, but I can move it to that repo instead while and let its
migration proceed on its own schedule while we clean this repo up.
Updates #6417
Updates tailscale/corp#8051
Change-Id: Ie13f82af3eb9f96b3a21c56cdda51be31ddebdcf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Follow-up to #6467 and #6506.
LocalBackend knows the server-mode state, so move more auth checking
there, removing some bookkeeping from ipnserver.Server.
Updates #6417
Updates tailscale/corp#8051
Change-Id: Ic5d14a077bf0dccc92a3621bd2646bab2cc5b837
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There are three specific requirements for Funnel to work:
1) They must accept an invite.
2) They must enable HTTPS.
3) The "funnel" node attribute must be appropriately set up in the ACLs.
Signed-off-by: Shayne Sweeney <shayne@tailscale.com>
This patch removes the crappy, half-backed COM initialization used by `go-ole`
and replaces that with the `StartRuntime` function from `wingoes`, a library I
have started which, among other things, initializes COM properly.
In particular, we should always be initializing COM to use the multithreaded
apartment. Every single OS thread in the process becomes implicitly initialized
as part of the MTA, so we do not need to concern ourselves as to whether or not
any particular OS thread has initialized COM. Furthermore, we no longer need to
lock the OS thread when calling methods on COM interfaces.
Single-threaded apartments are designed solely for working with Win32 threads
that have a message pump; any other use of the STA is invalid.
Fixes https://github.com/tailscale/tailscale/issues/3137
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Centralize the fake GOOS stuff, start to use it more. To be used more
in the future.
Change-Id: Iabacfbeaf5fca0b53bf4d5dbcdc0367f05a205f9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We're trying to gut 90% of the ipnserver package. A lot will get
deleted, some will move to LocalBackend, and a lot is being moved into
this new ipn/ipnauth package which will be leaf-y and testable.
This is a baby step towards moving some stuff to ipnauth.
Update #6417
Updates tailscale/corp#8051
Change-Id: I28bc2126764f46597d92a2d72565009dc6927ee0
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This commit implements `tailscale lock log [--limit N]`, which displays an ordered list
of changes to network-lock state in a manner familiar to `git log`.
Signed-off-by: Tom DNetto <tom@tailscale.com>
This uses a go:generate statement to create a bunch of .syso files that
contain a Windows resource file. We check these in since they're less
than 1KiB each, and are only included on Windows.
Fixes#6429
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I0512c3c0b2ab9d8d8509cf2037b88b81affcb81f
Current behavior is broken. tailscale serve text / "" returns no error
and shows up in tailscale serve status but requests return a 500
"empty handler".
Adds an error if the user passes in an empty string for the text
handler.
Closes#6405
Signed-off-by: Shayne Sweeney <shayne@tailscale.com>
This sets the "com.apple.quarantine" flag on macOS, and the
"Zone.Identifier" alternate data stream on Windows.
Change-Id: If14f805467b0e2963067937d7f34e08ba1d1fa85
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
This moves the NetworkLock key from a dedicated StateKey to be part of the persist.Persist struct.
This struct is stored as part for ipn.Prefs and is also the place where we store the NodeKey.
It also moves the ChonkDir from "/tka" to "/tka-profile/<profile-id>". The rename was intentional
to be able to delete the "/tka" dir if it exists.
This means that we will have a unique key per profile, and a unique directory per profile.
Note: `tailscale logout` will delete the entire profile, including any keys. It currently does not
delete the ChonkDir.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
QNAP 5.x works much better if we let Apache proxy
tailscale web, which means the URLs can no longer
be relative since apache sends us an internal
URL. Access QNAP authentication via
http://localhost:8080/ as documented in
https://download.qnap.com/dev/API_QNAP_QTS_Authentication.pdf
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
The key changed, but also we have a localapi method to set it anyway, so
use that.
Updates tailscale/corp#7515
Change-Id: Ia08ea2509f0bdd9b59e4c5de53aacf9a7d7eda36
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Run an inotify goroutine and watch if another program takes over
/etc/inotify.conf. Log if so.
For now this only logs. In the future I want to wire it up into the
health system to warn (visible in "tailscale status", etc) about the
situation, with a short URL to more info about how you should really
be using systemd-resolved if you want programs to not fight over your
DNS files on Linux.
Updates #4254 etc etc
Change-Id: I86ad9125717d266d0e3822d4d847d88da6a0daaa
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Noticed this while debugging something else, we would reset all routes if
either `--advertise-exit-node` or `--advertise-routes` were set. This handles
correctly updating them.
Also added tests.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The serve CLI doesn't exist yet, but we want nice tests for it when it
does exist.
Updates tailscale/corp#7515
Change-Id: Ib4c73d606242c4228f87410bbfd29bec52ca6c60
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
(I should've done this to start with.)
Updates tailscale/corp#7515
Change-Id: I7fb88cf95772790fd415ecf28fc52bde95507641
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Example output:
# Health check:
# - Some peers are advertising routes but --accept-routes is false
Also, move "tailscale status" health checks to the bottom, where they
won't be lost in large netmaps.
Updates #2053
Updates #6266
Change-Id: I5ae76a0cd69a452ce70063875cd7d974bfeb8f1a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
If the --key-file output filename ends in ".pfx" or ".p12", use pkcs12
format.
This might not be working entirely correctly yet but might be enough for
others to help out or experiment.
Updates #2928
Updates #5011
Change-Id: I62eb0eeaa293b9fd5e27b97b9bc476c23dd27cf6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Map is a concurrent safe map that is a trivial wrapper
over a Go map and a sync.RWMutex.
It is optimized for use-cases where the entries change often,
which is the opposite use-case of what sync.Map is optimized for.
The API is patterned off of sync.Map, but made generic.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Temporarily at least. Makes sharing scripts during development easier.
Updates tailscale/corp#7515
Change-Id: I0e7aa461accd2c60740c1b37f3492b6bb58f1be3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The derpers don't allow whitespace in the challenge.
Change-Id: I93a8b073b846b87854fba127b5c1d80db205f658
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
Leave only the HTTP/auth bits in localapi.
Change-Id: I8e23fb417367f1e0e31483e2982c343ca74086ab
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Only enable forwarding for an IP family if any forwarding is required
for that family.
Fixes#6221.
Signed-off-by: David Anderson <danderson@tailscale.com>
Not for end users (unless directed by support). Mostly for ease of
development for some upcoming webserver work.
Change-Id: I43acfed217514567acb3312367b24d620e739f88
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is similar to the golang.org/x/tools/internal/fastwalk I'd
previously written but not recursive and using mem.RO.
The metrics package already had some Linux-specific directory reading
code in it. Move that out to a new general package that can be reused
by portlist too, which helps its scanning of all /proc files:
name old time/op new time/op delta
FindProcessNames-8 2.79ms ± 6% 2.45ms ± 7% -12.11% (p=0.000 n=10+10)
name old alloc/op new alloc/op delta
FindProcessNames-8 62.9kB ± 0% 33.5kB ± 0% -46.76% (p=0.000 n=9+10)
name old allocs/op new allocs/op delta
FindProcessNames-8 2.25k ± 0% 0.38k ± 0% -82.98% (p=0.000 n=9+10)
Change-Id: I75db393032c328f12d95c39f71c9742c375f207a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The //go:build syntax was introduced in Go 1.17:
https://go.dev/doc/go1.17#build-lines
gofmt has kept the +build and go:build lines in sync since
then, but enough time has passed. Time to remove them.
Done with:
perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build')
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It is currently a `ipn.PrefsView` which means when we do a JSON roundtrip,
we go from an invalid Prefs to a valid one.
This makes it a pointer, which fixes the JSON roundtrip.
This was introduced in 0957bc5af2.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This implements the same functionality as the former run.sh, but in Go
and with a little better awareness of tailscaled's lifecycle.
Also adds TS_AUTH_ONCE, which fixes the unfortunate behavior run.sh had
where it would unconditionally try to reauth every time if you gave it
an authkey, rather than try to use it only if auth is actually needed.
This makes it a bit nicer to deploy these containers in automation, since
you don't have to run the container once, then go and edit its definition
to remove authkeys.
Signed-off-by: David Anderson <danderson@tailscale.com>
To collect some data on how widespread this is and whether there's
any correlation between different versions of Windows, etc.
Updates #4811
Change-Id: I003041d0d7e61d2482acd8155c1a4ed413a2c5c4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was from very early Tailscale and no longer makes sense.
Change-Id: I31b4e728789f26b0376ebe73aa1b4bbbb1d62607
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
* Plumb disablement values through some of the internals of TKA enablement.
* Transmit the node's TKA hash at the end of sync so the control plane understands each node's head.
* Implement /machine/tka/disable RPC to actuate disablement on the control plane.
There is a partner PR for the control server I'll send shortly.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Make "tailscale set" by itself be equivalent to "tailscale set -h"
rather than just say "you did it wrong" and make people do another -h
step.
Change-Id: Iad2b2ddb2595c0121d2536de5b78648f3eded3e3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Make netlogfmt useful regardless of the exact schema of the input.
If a JSON object looks like a network log message,
then unmarshal it as one and then print it.
This allows netlogfmt to support both a stream of JSON objects
directly serialized from netlogtype.Message, or the schema
returned by the /api/v2/tailnet/{{tailnet}}/network-logs API endpoint.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The netlog.Message type is useful to depend on from other packages,
but doing so would transitively cause gvisor and other large packages
to be linked in.
Avoid this problem by moving all network logging types to a single package.
We also update staticcheck to take in:
003d277bcf
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Saves about 1.4MB from the generated wasm file. The Brotli size is
basically unchanged (it's actually slightly larger, by 40K), suggesting
that most of the size delta is due to not inlining and other changes
that were easily compressible.
However, it still seems worthwhile to have a smaller final binary, to
reduce parse time and increase likelihood that we fit in the browser's
disk cache. Actual performance appears to be unchanged.
Updates #5142
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Turns out using win32 instead of shelling out to child processes is a
bit faster:
name old time/op new time/op delta
GetListIncremental-4 278ms ± 2% 0ms ± 7% -99.93% (p=0.000 n=8+10)
name old alloc/op new alloc/op delta
GetListIncremental-4 238kB ± 0% 9kB ± 0% -96.12% (p=0.000 n=10+8)
name old allocs/op new allocs/op delta
GetListIncremental-4 1.19k ± 0% 0.02k ± 0% -98.49% (p=0.000 n=10+10)
Fixes#3876 (sadly)
Change-Id: I1195ac5de21a8a8b3cdace5871d263e81aa27e91
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
name old time/op new time/op delta
GetList-8 11.2ms ± 5% 11.1ms ± 3% ~ (p=0.661 n=10+9)
name old alloc/op new alloc/op delta
GetList-8 83.3kB ± 1% 67.4kB ± 1% -19.05% (p=0.000 n=10+10)
name old allocs/op new allocs/op delta
GetList-8 2.89k ± 2% 2.19k ± 1% -24.24% (p=0.000 n=10+10)
(real issue is we're calling this code as much as we are, but easy
enough to make it efficient because it'll still need to be called
sometimes in any case)
Updates #5958
Change-Id: I90c20278d73e80315a840aed1397d24faa308d93
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The Lufthansa in-flight wifi generates a synthetic 204 response to the
DERP server's /generate_204 endpoint. This PR adds a basic
challenge/response to the endpoint; something sufficiently complicated
that it's unlikely to be implemented by a captive portal. We can then
check for the expected response to verify whether we're being MITM'd.
Follow-up to #5601
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I94a68c9a16a7be7290200eea6a549b64f02ff48f
We removed it in #4806 in favor of the built-in functionality from the
nhooyr.io/websocket package. However, it has an issue with deadlines
that has not been fixed yet (see nhooyr/websocket#350). Temporarily
go back to using a custom wrapper (using the fix from our fork) so that
derpers will stop closing connections too aggressively.
Updates #5921
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Allows UI to display slightly more fine-grained progress when the SSH
connection is being established.
Updates tailscale/corp#7186
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This package parses a JSON stream of netlog.Message from os.Stdin
and pretty prints the contents as a stream of tables.
It supports reverse lookup of tailscale IP addresses if given
an API key and the tailnet that these traffic logs belong to.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This way we can do that once (out of band, in the GitHub action),
instead of increasing the time of each deploy that uses the package.
.wasm is removed from the list of automatically pre-compressed
extensions, an OSS bump and small change on the corp side is needed to
make use of this change.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
If the wgcfg.Config is specified with network logging arguments,
then Userspace.Reconfig starts up an asynchronous network logger,
which is shutdown either upon Userspace.Close or when Userspace.Reconfig
is called again without network logging or route arguments.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
If the username includes a suffix of +password, then we accept
password auth and just let them in like it were no auth.
This exists purely for SSH clients that get confused by seeing success
to their initial auth type "none".
Co-authored-by: Maisem Ali <maisem@tailscale.com>
Change-Id: I616d4c64d042449fb164f615012f3bae246e91ec
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When Tailscale is installed via Homebrew, `/usr/local/bin/tailscaled`
is a symlink to the actual binary.
Now when `tailscaled install-system-daemon` runs, it will not attempt
to overwrite that symlink if it already points to the tailscaled binary.
However, if executed binary and the link target differ, the path will
he overwritten - this can happen when a user decides to replace
Homebrew-installed tailscaled with a one compiled from source code.
Fixes#5353
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
188.166.70.128 port 2222 for now. Some hostname later maybe.
Change-Id: I9c329410035221ed6cdff7a482727d30b77eea8b
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Send two banners with a second in between, this demonstrates the case
where all banners are shown after auth completes and not during.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
For SSH client authors to fix their clients without setting up
Tailscale stuff.
Change-Id: I8c7049398512de6cb91c13716d4dcebed4d47b9c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The window may not end up getting unloaded (if other beforeunload
handlers prevent the event), thus we should only close the SSH session
if it's truly getting unloaded.
Updates tailscale/corp#7304
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
If Wrapper.StatisticsEnable is enabled,
then per-connection counters are maintained.
If enabled, Wrapper.StatisticsExtract must be periodically called
otherwise there is unbounded memory growth.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
xterm 5.0 was released a few weeks ago, and it picks up
xtermjs/xterm.js#4069, which was the main reason why we were on a 5.0
beta.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
From the original commit that implemented it:
It accepts Postgres connections over Tailscale only, dials
out to the configured upstream database with TLS (using
strong settings, not the swiss cheese that postgres defaults to),
and proxies the client through.
It also keeps an audit log of the sessions it passed through,
along with the Tailscale-provided machine and user identity
of the connecting client.
In our other repo, this was:
commit 92e5edf98e8c2be362f564a408939a5fc3f8c539,
Change-Id I742959faaa9c7c302bc312c7dc0d3327e677dc28.
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Signed-off-by: David Anderson <danderson@tailscale.com>
And add a CLI/localapi and c2n mechanism to enable it for a fixed
amount of time.
Updates #1548
Change-Id: I71674aaf959a9c6761ff33bbf4a417ffd42195a7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Most visible when using tsnet.Server, but could have resulted in dropped
messages in a few other places too.
Fixes#5743
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
I added new functions to winutil to obtain the state of a service and all
its depedencies, serialize them to JSON, and write them to a Logf.
When tstun.New returns a wrapped ERROR_DEVICE_NOT_AVAILABLE, we know that wintun
installation failed. We then log the service graph rooted at "NetSetupSvc".
We are interested in that specific service because network devices will not
install if that service is not running.
Updates https://github.com/tailscale/tailscale/issues/5531
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
* and move goroutine scrubbing code to its own package for reuse
* bump capver to 45
Change-Id: I9b4dfa5af44d2ecada6cc044cd1b5674ee427575
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
- removed some in-flow time calls
- increase buffer size to 2MB to overcome syscall cost
- move relative time computation from record to report time
Signed-off-by: James Tucker <james@tailscale.com>
* tailcfg, control/controlhttp, control/controlclient: add ControlDialPlan field
This field allows the control server to provide explicit information
about how to connect to it; useful if the client's link status can
change after the initial connection, or if the DNS settings pushed by
the control server break future connections.
Change-Id: I720afe6289ec27d40a41b3dcb310ec45bd7e5f3e
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
Personal preference (so it's obvious it's not a bool flag), but it
also matches the --state= before it.
Bonus: stop allowing PORT to sneak in extra flags to be passed as
their own arguments, as $FOO and ${FOO} expand differently. (${FOO} is
required to concat to strings)
Change-Id: I994626a5663fe0948116b46a971e5eb2c4023216
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We were just logging them to the console, which is useful for debugging,
but we may want to show them in the UI too.
Updates tailscale/corp#6939
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This doesn't change any behaviour for now, other than maybe running a
full netcheck more often. The intent is to start gathering data on
captive portals, and additionally, seeing this in the 'tailscale
netcheck' command should provide a bit of additional information to
users.
Updates #1634
Change-Id: I6ba08f9c584dc0200619fa97f9fde1a319f25c76
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
d5e7e309 changed the `hostinfo.GetVersion` from distro and distro version
to UTS Name Release and moved distribution information under
`hostinfo.Distro*`.
`tailscale configure-host` command implementation for Synology DSM
environments relies on the old semantics of this string for matching DSM
Major version so it's been broken for a few days.
Pull in `hostinfo` and prefix match `hostinfo.DistroVersion` to match
DSM major version.
Signed-off-by: Berk D. Demir <bdd@mindcast.org>
5 seconds may not be enough if we're still loading the derp map and
connecting to a slow machine.
Updates #5693
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
The check was happening too early and in the case of error would wait 5
s and then error out. This makes it so that it does validations before
the SSH check.
Signed-off-by: Maisem Ali <maisem@tailscale.com>
ipnserver previously had support for a Windows-only environment
variable mechanism that further only worked when Windows was running
as a service, not from a console.
But we want it to work from tailscaed too, and we want it to work on
macOS and Synology. So move it to envknob, now that envknob can change
values at runtime post-init.
A future change will wire this up for more platforms, and do something
more for CLI flags like --port, which the bug was originally about.
Updates #5114
Change-Id: I9fd69a9a91bb0f308fc264d4a6c33e0cbe352d71
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This turns 'dialParams' into something more like net.Dialer, where
configuration fields are public on the struct.
Split out of #5648
Change-Id: I0c56fd151dc5489c3c94fb40d18fd639e06473bc
Signed-off-by: Andrew Dunham <andrew@tailscale.com>
The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Reference: https://golang.org/doc/go1.16#ioutil
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
The data that we send over WebSockets is encrypted and thus not
compressible. Additionally, Safari has a broken implementation of compression
(see nhooyr/websocket#218) that makes enabling it actively harmful.
Fixestailscale/corp#6943
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
As noted in #5617, our documented method of blocking log.tailscale.io
DNS no longer works due to bootstrap DNS.
Instead, provide an explicit flag (--no-logs-no-support) and/or env
variable (TS_NO_LOGS_NO_SUPPORT=true) to explicitly disable logcatcher
uploads. It also sets a bit on Hostinfo to say that the node is in that
mode so we can end any support tickets from such nodes more quickly.
This does not yet provide an easy mechanism for users on some
platforms (such as Windows, macOS, Synology) to set flags/env. On
Linux you'd used /etc/default/tailscaled typically. Making it easier
to set flags for other platforms is tracked in #5114.
Fixes#5617Fixestailscale/corp#1475
Change-Id: I72404e1789f9e56ec47f9b7021b44c025f7a373a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The auto-generated hostname is nice as a default, but there are cases
where the client has a more specific name that it can generate.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
The default WebLinksAddon handler uses window.open(), but that gets blocked
by the popup blocker when the event being handled is another window. We
instead need to invoke open() on the window that the event was triggered
in.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
The `tailscale web` UI is the primary interface for Synology and Home
Assistant users (and perhaps others), so is the logical place to put our
open source license notices. I don't love adding things to what is
currently a very minimal UI, but I'm not sure of a better option.
Updates tailscale/corp#5780
Signed-off-by: Will Norris <will@tailscale.com>
More user friendly, and as a side-effect we handle SSH check mode better,
since the URL that's output is now clickable.
Fixes#5247
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
xtermjs/xterm.js#4069 was merged and published (in 5.0.0-beta.58),
no need for the fork added by 01e6565e8a.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
NextDNS is unique in that users create accounts and then get
user-specific DNS IPs & DoH URLs.
For DoH, the customer ID is in the URL path.
For IPv6, the IP address includes the customer ID in the lower bits.
For IPv4, there's a fragile "IP linking" mechanism to associate your
public IPv4 with an assigned NextDNS IPv4 and that tuple maps to your
customer ID.
We don't use the IP linking mechanism.
Instead, NextDNS is DoH-only. Which means using NextDNS necessarily
shunts all DNS traffic through 100.100.100.100 (programming the OS to
use 100.100.100.100 as the global resolver) because operating systems
can't usually do DoH themselves.
Once it's in Tailscale's DoH client, we then connect out to the known
NextDNS IPv4/IPv6 anycast addresses.
If the control plane sends the client a NextDNS IPv6 address, we then
map it to the corresponding NextDNS DoH with the same client ID, and
we dial that DoH server using the combination of v4/v6 anycast IPs.
Updates #2452
Change-Id: I3439d798d21d5fc9df5a2701839910f5bef85463
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Allows other work to be unblocked while xtermjs/xterm.js#4069 is worked
through.
To enable testing the popup window handling, the standalone app allows
opening of SSH sessions in new windows by holding down the alt key
while pressing the SSH button.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Store the requested size is a struct field, and use that when actually
creating the SSH session.
Fixes#5567
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
